include/configs/MPC8349ITX.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  MPC8349E-mITX and MPC8349E-mITX-GP board configuration file
  25
  26  Memory map:
  27
  28  0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
  29  0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
  30  0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
  31  0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
  32  0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
  33  0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
  34  0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only)
  35  0xF001_0000-0xF001_FFFF Local bus expansion slot
  36  0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only)
  37  0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory
  38  0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only)
  39
  40  I2C address list:
  41                                                 Align.  Board
  42  Bus    Addr    Part No.        Description     Length  Location
  43  ----------------------------------------------------------------
  44  I2C0   0x50    M24256-BWMN6P   Board EEPROM    2       U64
  45
  46  I2C1   0x20    PCF8574         I2C Expander    0       U8
  47  I2C1   0x21    PCF8574         I2C Expander    0       U10
  48  I2C1   0x38    PCF8574A        I2C Expander    0       U8
  49  I2C1   0x39    PCF8574A        I2C Expander    0       U10
  50  I2C1   0x51    (DDR)           DDR EEPROM      1       U1
  51  I2C1   0x68    DS1339          RTC             1       U68
  52
  53  Note that a given board has *either* a pair of 8574s or a pair of 8574As.
  54 */
  55
  56 #ifndef __CONFIG_H
  57 #define __CONFIG_H
  58
  59 #if (TEXT_BASE == 0xFE000000)
  60 #define CONFIG_SYS_LOWBOOT
  61 #endif
  62
  63 /*
  64  * High Level Configuration Options
  65  */
  66 #define CONFIG_MPC834X          /* MPC834x family (8343, 8347, 8349) */
  67 #define CONFIG_MPC8349          /* MPC8349 specific */
  68
  69 #define CONFIG_SYS_IMMR         0xE0000000      /* The IMMR is relocated to here */
  70
  71 #define CONFIG_MISC_INIT_F
  72 #define CONFIG_MISC_INIT_R
  73
  74 /*
  75  * On-board devices
  76  */
  77
  78 #ifdef CONFIG_MPC8349ITX
  79 #define CONFIG_COMPACT_FLASH    /* The CF card interface on the back of the board */
  80 #define CONFIG_VSC7385_ENET     /* VSC7385 ethernet support */
  81 #endif
  82
  83 #define CONFIG_PCI
  84 #define CONFIG_RTC_DS1337
  85 #define CONFIG_HARD_I2C
  86 #define CONFIG_TSEC_ENET                /* TSEC Ethernet support */
  87
  88 /*
  89  * Device configurations
  90  */
  91
  92 /* I2C */
  93 #ifdef CONFIG_HARD_I2C
  94
  95 #define CONFIG_FSL_I2C
  96 #define CONFIG_I2C_MULTI_BUS
  97 #define CONFIG_I2C_CMD_TREE
  98 #define CONFIG_SYS_I2C_OFFSET           0x3000
  99 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 100 #define CONFIG_SYS_SPD_BUS_NUM          1       /* The I2C bus for SPD */
 101
 102 #define CONFIG_SYS_I2C_8574_ADDR1       0x20    /* I2C1, PCF8574 */
 103 #define CONFIG_SYS_I2C_8574_ADDR2       0x21    /* I2C1, PCF8574 */
 104 #define CONFIG_SYS_I2C_8574A_ADDR1      0x38    /* I2C1, PCF8574A */
 105 #define CONFIG_SYS_I2C_8574A_ADDR2      0x39    /* I2C1, PCF8574A */
 106 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* I2C0, Board EEPROM */
 107 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* I2C1, DS1339 RTC*/
 108 #define SPD_EEPROM_ADDRESS      0x51    /* I2C1, DDR */
 109
 110 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 111 #define CONFIG_SYS_I2C_SLAVE            0x7F
 112
 113 /* Don't probe these addresses: */
 114 #define CONFIG_SYS_I2C_NOPROBES {{1, CONFIG_SYS_I2C_8574_ADDR1}, \
 115                                  {1, CONFIG_SYS_I2C_8574_ADDR2}, \
 116                                  {1, CONFIG_SYS_I2C_8574A_ADDR1}, \
 117                                  {1, CONFIG_SYS_I2C_8574A_ADDR2}}
 118 /* Bit definitions for the 8574[A] I2C expander */
 119 #define I2C_8574_REVISION       0x03    /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
 120 #define I2C_8574_CF             0x08    /* 1=Compact flash absent, 0=present */
 121 #define I2C_8574_MPCICLKRN      0x10    /* MiniPCI Clk Run */
 122 #define I2C_8574_PCI66          0x20    /* 0=33MHz PCI, 1=66MHz PCI */
 123 #define I2C_8574_FLASHSIDE      0x40    /* 0=Reset vector from U4, 1=from U7*/
 124
 125 #undef CONFIG_SOFT_I2C
 126
 127 #endif
 128
 129 /* Compact Flash */
 130 #ifdef CONFIG_COMPACT_FLASH
 131
 132 #define CONFIG_SYS_IDE_MAXBUS           1
 133 #define CONFIG_SYS_IDE_MAXDEVICE        1
 134
 135 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 136 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_CF_BASE
 137 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0000
 138 #define CONFIG_SYS_ATA_REG_OFFSET       0
 139 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0200
 140 #define CONFIG_SYS_ATA_STRIDE           2
 141
 142 #define ATA_RESET_TIME  1       /* If a CF card is not inserted, time out quickly */
 143
 144 #define CONFIG_DOS_PARTITION
 145
 146 #endif
 147
 148 /*
 149  * DDR Setup
 150  */
 151 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is system memory*/
 152 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 153 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 154 #define CONFIG_SYS_83XX_DDR_USES_CS0
 155 #define CONFIG_SYS_MEMTEST_START        0x1000          /* memtest region */
 156 #define CONFIG_SYS_MEMTEST_END          0x2000
 157
 158 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
 159                                 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 160
 161 #ifdef CONFIG_HARD_I2C
 162 #define CONFIG_SPD_EEPROM               /* use SPD EEPROM for DDR setup*/
 163 #endif
 164
 165 #ifndef CONFIG_SPD_EEPROM       /* No SPD? Then manually set up DDR parameters */
 166     #define CONFIG_SYS_DDR_SIZE 256             /* Mb */
 167     #define CONFIG_SYS_DDR_CONFIG       (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
 168
 169     #define CONFIG_SYS_DDR_TIMING_1     0x26242321
 170     #define CONFIG_SYS_DDR_TIMING_2     0x00000800  /* P9-45, may need tuning */
 171 #endif
 172
 173 /*
 174  *Flash on the Local Bus
 175  */
 176
 177 #define CONFIG_SYS_FLASH_CFI                            /* use the Common Flash Interface */
 178 #define CONFIG_FLASH_CFI_DRIVER                 /* use the CFI driver */
 179 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 180 #define CONFIG_SYS_FLASH_EMPTY_INFO
 181 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* 127 64KB sectors + 8 8KB sectors per device */
 182 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 183 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 184 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 185
 186 /* The ITX has two flash chips, but the ITX-GP has only one.  To support both
 187 boards, we say we have two, but don't display a message if we find only one. */
 188 #define CONFIG_SYS_FLASH_QUIET_TEST
 189 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 190 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
 191 #define CONFIG_SYS_FLASH_SIZE           16              /* FLASH size in MB */
 192 #define CONFIG_SYS_FLASH_SIZE_SHIFT     4               /* log2 of the above value */
 193 #define CONFIG_SYS_FLASH_PROTECTION     1               /* Use h/w Flash protection. */
 194
 195 /* Vitesse 7385 */
 196
 197 #ifdef CONFIG_VSC7385_ENET
 198
 199 #define CONFIG_TSEC2
 200
 201 /* The flash address and size of the VSC7385 firmware image */
 202 #define CONFIG_VSC7385_IMAGE            0xFEFFE000
 203 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 204
 205 #endif
 206
 207 /*
 208  * BRx, ORx, LBLAWBARx, and LBLAWARx
 209  */
 210
 211 /* Flash */
 212
 213 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
 214 #define CONFIG_SYS_OR0_PRELIM           ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
 215                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 216                                 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 217 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 218 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
 219
 220 /* Vitesse 7385 */
 221
 222 #define CONFIG_SYS_VSC7385_BASE 0xF8000000
 223
 224 #ifdef CONFIG_VSC7385_ENET
 225
 226 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V)
 227 #define CONFIG_SYS_OR1_PRELIM           (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 228                                 OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
 229                                 OR_GPCM_EHTR | OR_GPCM_EAD)
 230
 231 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_VSC7385_BASE
 232 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 233
 234 #endif
 235
 236 /* LED */
 237
 238 #define CONFIG_SYS_LED_BASE             0xF9000000
 239 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V)
 240 #define CONFIG_SYS_OR2_PRELIM           (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 241                                 OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \
 242                                 OR_GPCM_EHTR | OR_GPCM_EAD)
 243
 244 /* Compact Flash */
 245
 246 #ifdef CONFIG_COMPACT_FLASH
 247
 248 #define CONFIG_SYS_CF_BASE              0xF0000000
 249
 250 #define CONFIG_SYS_BR3_PRELIM           (CONFIG_SYS_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
 251 #define CONFIG_SYS_OR3_PRELIM           (OR_UPM_AM | OR_UPM_BI)
 252
 253 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_CF_BASE
 254 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_64KB)
 255
 256 #endif
 257
 258 /*
 259  * U-Boot memory configuration
 260  */
 261 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 262
 263 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 264 #define CONFIG_SYS_RAMBOOT
 265 #else
 266 #undef  CONFIG_SYS_RAMBOOT
 267 #endif
 268
 269 #define CONFIG_L1_INIT_RAM
 270 #define CONFIG_SYS_INIT_RAM_LOCK
 271 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM address */
 272 #define CONFIG_SYS_INIT_RAM_END 0x1000          /* End of used area in RAM*/
 273
 274 #define CONFIG_SYS_GBL_DATA_SIZE        0x100           /* num bytes initial data */
 275 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 276 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 277
 278 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 279 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 280 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024) /* Reserved for malloc */
 281
 282 /*
 283  * Local Bus LCRR and LBCR regs
 284  *    LCRR:  DLL bypass, Clock divider is 4
 285  * External Local Bus rate is
 286  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 287  */
 288 #define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
 289 #define CONFIG_SYS_LBC_LBCR     0x00000000
 290
 291 #define CONFIG_SYS_LBC_LSRT     0x32000000    /* LB sdram refresh timer, about 6us */
 292 #define CONFIG_SYS_LBC_MRTPR    0x20000000    /* LB refresh timer prescal, 266MHz/32*/
 293
 294 /*
 295  * Serial Port
 296  */
 297 #define CONFIG_CONS_INDEX       1
 298 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 299 #define CONFIG_SYS_NS16550
 300 #define CONFIG_SYS_NS16550_SERIAL
 301 #define CONFIG_SYS_NS16550_REG_SIZE     1
 302 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 303
 304 #define CONFIG_SYS_BAUDRATE_TABLE  \
 305         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 306
 307 #define CONFIG_CONSOLE          ttyS0
 308 #define CONFIG_BAUDRATE         115200
 309
 310 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
 311 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
 312
 313 /* pass open firmware flat tree */
 314 #define CONFIG_OF_LIBFDT        1
 315 #define CONFIG_OF_BOARD_SETUP   1
 316 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 317
 318 /*
 319  * PCI
 320  */
 321 #ifdef CONFIG_PCI
 322
 323 #define CONFIG_MPC83XX_PCI2
 324
 325 /*
 326  * General PCI
 327  * Addresses are mapped 1-1.
 328  */
 329 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 330 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 331 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 332 #define CONFIG_SYS_PCI1_MMIO_BASE       (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 333 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 334 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 335 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 336 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 337 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000      /* 16M */
 338
 339 #ifdef CONFIG_MPC83XX_PCI2
 340 #define CONFIG_SYS_PCI2_MEM_BASE        (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
 341 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 342 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 343 #define CONFIG_SYS_PCI2_MMIO_BASE       (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
 344 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 345 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 346 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000
 347 #define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
 348 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000      /* 16M */
 349 #endif
 350
 351 #define _IO_BASE                0x00000000      /* points to PCI I/O space */
 352
 353 #define CONFIG_NET_MULTI
 354 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 355
 356 #ifdef CONFIG_RTL8139
 357 /* This macro is used by RTL8139 but not defined in PPC architecture */
 358 #define KSEG1ADDR(x)        (x)
 359 #endif
 360
 361 #ifndef CONFIG_PCI_PNP
 362     #define PCI_ENET0_IOADDR    0x00000000
 363     #define PCI_ENET0_MEMADDR   CONFIG_SYS_PCI2_MEM_BASE
 364     #define PCI_IDSEL_NUMBER    0x0f    /* IDSEL = AD15 */
 365 #endif
 366
 367 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 368
 369 #endif
 370
 371 #define PCI_66M
 372 #ifdef PCI_66M
 373 #define CONFIG_83XX_CLKIN       66666666        /* in Hz */
 374 #else
 375 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
 376 #endif
 377
 378 /* TSEC */
 379
 380 #ifdef CONFIG_TSEC_ENET
 381
 382 #define CONFIG_NET_MULTI
 383 #define CONFIG_MII
 384 #define CONFIG_PHY_GIGE         /* In case CONFIG_CMD_MII is specified */
 385
 386 #define CONFIG_TSEC1
 387
 388 #ifdef CONFIG_TSEC1
 389 #define CONFIG_HAS_ETH0
 390 #define CONFIG_TSEC1_NAME  "TSEC0"
 391 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 392 #define TSEC1_PHY_ADDR          0x1c    /* VSC8201 uses address 0x1c */
 393 #define TSEC1_PHYIDX            0
 394 #define TSEC1_FLAGS             TSEC_GIGABIT
 395 #endif
 396
 397 #ifdef CONFIG_TSEC2
 398 #define CONFIG_HAS_ETH1
 399 #define CONFIG_TSEC2_NAME  "TSEC1"
 400 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 401
 402 #define TSEC2_PHY_ADDR          4
 403 #define TSEC2_PHYIDX            0
 404 #define TSEC2_FLAGS             TSEC_GIGABIT
 405 #endif
 406
 407 #define CONFIG_ETHPRIME         "Freescale TSEC"
 408
 409 #endif
 410
 411 /*
 412  * Environment
 413  */
 414 #define CONFIG_ENV_OVERWRITE
 415
 416 #ifndef CONFIG_SYS_RAMBOOT
 417   #define CONFIG_ENV_IS_IN_FLASH
 418   #define CONFIG_ENV_ADDR               (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 419   #define CONFIG_ENV_SECT_SIZE  0x10000 /* 64K (one sector) for environment */
 420   #define CONFIG_ENV_SIZE               0x2000
 421 #else
 422   #define CONFIG_SYS_NO_FLASH           /* Flash is not usable now */
 423   #undef  CONFIG_FLASH_CFI_DRIVER
 424   #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
 425   #define CONFIG_ENV_ADDR               (CONFIG_SYS_MONITOR_BASE - 0x1000)
 426   #define CONFIG_ENV_SIZE               0x2000
 427 #endif
 428
 429 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 430 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 431
 432 /*
 433  * BOOTP options
 434  */
 435 #define CONFIG_BOOTP_BOOTFILESIZE
 436 #define CONFIG_BOOTP_BOOTPATH
 437 #define CONFIG_BOOTP_GATEWAY
 438 #define CONFIG_BOOTP_HOSTNAME
 439
 440
 441 /*
 442  * Command line configuration.
 443  */
 444 #include <config_cmd_default.h>
 445
 446 #define CONFIG_CMD_CACHE
 447 #define CONFIG_CMD_DATE
 448 #define CONFIG_CMD_IRQ
 449 #define CONFIG_CMD_NET
 450 #define CONFIG_CMD_PING
 451 #define CONFIG_CMD_SDRAM
 452
 453 #ifdef CONFIG_COMPACT_FLASH
 454     #define CONFIG_CMD_IDE
 455     #define CONFIG_CMD_FAT
 456 #endif
 457
 458 #ifdef CONFIG_PCI
 459     #define CONFIG_CMD_PCI
 460 #endif
 461
 462 #ifdef CONFIG_HARD_I2C
 463     #define CONFIG_CMD_I2C
 464 #endif
 465
 466 /* Watchdog */
 467 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 468
 469 /*
 470  * Miscellaneous configurable options
 471  */
 472 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 473 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 474 #define CONFIG_SYS_HUSH_PARSER                  /* Use the HUSH parser */
 475 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 476
 477 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 478 #define CONFIG_LOADADDR 500000  /* default location for tftp and bootm */
 479
 480 #ifdef CONFIG_MPC8349ITX
 481 #define CONFIG_SYS_PROMPT       "MPC8349E-mITX> "       /* Monitor Command Prompt */
 482 #else
 483 #define CONFIG_SYS_PROMPT       "MPC8349E-mITX-GP> "    /* Monitor Command Prompt */
 484 #endif
 485
 486 #if defined(CONFIG_CMD_KGDB)
 487     #define CONFIG_SYS_CBSIZE   1024            /* Console I/O Buffer Size */
 488 #else
 489     #define CONFIG_SYS_CBSIZE   256             /* Console I/O Buffer Size */
 490 #endif
 491
 492 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 493 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 494 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 495 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 496
 497 /*
 498  * For booting Linux, the board info and command line data
 499  * have to be in the first 8 MB of memory, since this is
 500  * the maximum mapped by the Linux kernel during initialization.
 501  */
 502 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 503
 504 #define CONFIG_SYS_HRCW_LOW (\
 505         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 506         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 507         HRCWL_CSB_TO_CLKIN_4X1 |\
 508         HRCWL_VCO_1X2 |\
 509         HRCWL_CORE_TO_CSB_2X1)
 510
 511 #ifdef CONFIG_SYS_LOWBOOT
 512 #define CONFIG_SYS_HRCW_HIGH (\
 513         HRCWH_PCI_HOST |\
 514         HRCWH_32_BIT_PCI |\
 515         HRCWH_PCI1_ARBITER_ENABLE |\
 516         HRCWH_PCI2_ARBITER_ENABLE |\
 517         HRCWH_CORE_ENABLE |\
 518         HRCWH_FROM_0X00000100 |\
 519         HRCWH_BOOTSEQ_DISABLE |\
 520         HRCWH_SW_WATCHDOG_DISABLE |\
 521         HRCWH_ROM_LOC_LOCAL_16BIT |\
 522         HRCWH_TSEC1M_IN_GMII |\
 523         HRCWH_TSEC2M_IN_GMII )
 524 #else
 525 #define CONFIG_SYS_HRCW_HIGH (\
 526         HRCWH_PCI_HOST |\
 527         HRCWH_32_BIT_PCI |\
 528         HRCWH_PCI1_ARBITER_ENABLE |\
 529         HRCWH_PCI2_ARBITER_ENABLE |\
 530         HRCWH_CORE_ENABLE |\
 531         HRCWH_FROM_0XFFF00100 |\
 532         HRCWH_BOOTSEQ_DISABLE |\
 533         HRCWH_SW_WATCHDOG_DISABLE |\
 534         HRCWH_ROM_LOC_LOCAL_16BIT |\
 535         HRCWH_TSEC1M_IN_GMII |\
 536         HRCWH_TSEC2M_IN_GMII )
 537 #endif
 538
 539 /*
 540  * System performance
 541  */
 542 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 543 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 544 #define CONFIG_SYS_SPCR_TSEC1EP 3       /* TSEC1 emergency priority (0-3) */
 545 #define CONFIG_SYS_SPCR_TSEC2EP 3       /* TSEC2 emergency priority (0-3) */
 546 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* TSEC1 clock mode (0-3) */
 547 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* TSEC2 & I2C0 clock mode (0-3) */
 548
 549 /*
 550  * System IO Config
 551  */
 552 #define CONFIG_SYS_SICRH SICRH_TSOBI1   /* Needed for gigabit to work on TSEC 1 */
 553 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
 554
 555 #define CONFIG_SYS_HID0_INIT    0x000000000
 556 #define CONFIG_SYS_HID0_FINAL   CONFIG_SYS_HID0_INIT
 557
 558 #define CONFIG_SYS_HID2 HID2_HBE
 559 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 560
 561 /* DDR  */
 562 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 563 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 564
 565 /* PCI  */
 566 #ifdef CONFIG_PCI
 567 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 568 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 569 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 570 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 571 #else
 572 #define CONFIG_SYS_IBAT1L       0
 573 #define CONFIG_SYS_IBAT1U       0
 574 #define CONFIG_SYS_IBAT2L       0
 575 #define CONFIG_SYS_IBAT2U       0
 576 #endif
 577
 578 #ifdef CONFIG_MPC83XX_PCI2
 579 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 580 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 581 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 582 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 583 #else
 584 #define CONFIG_SYS_IBAT3L       0
 585 #define CONFIG_SYS_IBAT3U       0
 586 #define CONFIG_SYS_IBAT4L       0
 587 #define CONFIG_SYS_IBAT4U       0
 588 #endif
 589
 590 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 591 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 592 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 593
 594 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 595 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 596 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 597
 598 #define CONFIG_SYS_IBAT7L       0
 599 #define CONFIG_SYS_IBAT7U       0
 600
 601 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 602 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 603 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 604 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 605 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 606 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 607 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 608 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 609 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 610 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 611 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 612 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 613 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 614 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 615 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 616 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 617
 618 /*
 619  * Internal Definitions
 620  *
 621  * Boot Flags
 622  */
 623 #define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH */
 624 #define BOOTFLAG_WARM   0x02    /* Software reboot */
 625
 626 #if defined(CONFIG_CMD_KGDB)
 627 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 628 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 629 #endif
 630
 631
 632 /*
 633  * Environment Configuration
 634  */
 635 #define CONFIG_ENV_OVERWRITE
 636
 637 #ifdef CONFIG_HAS_ETH0
 638 #define CONFIG_ETHADDR          00:E0:0C:00:8C:01
 639 #endif
 640
 641 #ifdef CONFIG_HAS_ETH1
 642 #define CONFIG_ETH1ADDR         00:E0:0C:00:8C:02
 643 #endif
 644
 645 #define CONFIG_IPADDR           192.168.1.253
 646 #define CONFIG_SERVERIP         192.168.1.1
 647 #define CONFIG_GATEWAYIP        192.168.1.1
 648 #define CONFIG_NETMASK          255.255.252.0
 649 #define CONFIG_NETDEV           eth0
 650
 651 #ifdef CONFIG_MPC8349ITX
 652 #define CONFIG_HOSTNAME         mpc8349emitx
 653 #else
 654 #define CONFIG_HOSTNAME         mpc8349emitxgp
 655 #endif
 656
 657 /* Default path and filenames */
 658 #define CONFIG_ROOTPATH         /nfsroot/rootfs
 659 #define CONFIG_BOOTFILE         uImage
 660 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 661
 662 #ifdef CONFIG_MPC8349ITX
 663 #define CONFIG_FDTFILE          mpc8349emitx.dtb
 664 #else
 665 #define CONFIG_FDTFILE          mpc8349emitxgp.dtb
 666 #endif
 667
 668 #define CONFIG_BOOTDELAY        0
 669
 670 #define XMK_STR(x)      #x
 671 #define MK_STR(x)       XMK_STR(x)
 672
 673 #define CONFIG_BOOTARGS \
 674         "root=/dev/nfs rw" \
 675         " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
 676         " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":"    \
 677                 MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
 678                 MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
 679         " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
 680
 681 #define CONFIG_EXTRA_ENV_SETTINGS \
 682         "console=" MK_STR(CONFIG_CONSOLE) "\0"                          \
 683         "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
 684         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
 685         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 686                 "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
 687                 "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
 688                 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
 689                 "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
 690                 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
 691         "fdtaddr=400000\0"                                              \
 692         "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"
 693
 694 #define CONFIG_NFSBOOTCOMMAND                                           \
 695         "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath"  \
 696         " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 697         " console=$console,$baudrate $othbootargs; "                    \
 698         "tftp $loadaddr $bootfile;"                                     \
 699         "tftp $fdtaddr $fdtfile;"                                       \
 700         "bootm $loadaddr - $fdtaddr"
 701
 702 #define CONFIG_RAMBOOTCOMMAND                                           \
 703         "setenv bootargs root=/dev/ram rw"                              \
 704         " console=$console,$baudrate $othbootargs; "                    \
 705         "tftp $ramdiskaddr $ramdiskfile;"                               \
 706         "tftp $loadaddr $bootfile;"                                     \
 707         "tftp $fdtaddr $fdtfile;"                                       \
 708         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 709
 710 #undef MK_STR
 711 #undef XMK_STR
 712
 713 #endif