include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_SDCARD
  18 #define CONFIG_RAMBOOT_SDCARD           1
  19 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  21 #endif
  22
  23 #ifdef CONFIG_SPIFLASH
  24 #define CONFIG_RAMBOOT_SPIFLASH         1
  25 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  27 #endif
  28
  29 #ifndef CONFIG_SYS_TEXT_BASE
  30 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  31 #endif
  32
  33 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  35 #endif
  36
  37 #ifndef CONFIG_SYS_MONITOR_BASE
  38 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  39 #endif
  40
  41 /* High Level Configuration Options */
  42 #define CONFIG_BOOKE            1       /* BOOKE */
  43 #define CONFIG_E500             1       /* BOOKE e500 family */
  44 #define CONFIG_MPC8536          1
  45 #define CONFIG_MPC8536DS        1
  46
  47 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  48 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  49 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  50 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  51 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  52 #define CONFIG_PCIE3            1       /* PCIE controller 3 (ULI bridge) */
  53 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  54 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  55 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  56 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  57
  58 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  59
  60 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  61 #define CONFIG_ENV_OVERWRITE
  62
  63 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  64 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  65 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  66
  67 /*
  68  * These can be toggled for performance analysis, otherwise use default.
  69  */
  70 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  71 #define CONFIG_BTB                      /* toggle branch predition */
  72
  73 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  74
  75 #define CONFIG_ENABLE_36BIT_PHYS        1
  76
  77 #ifdef CONFIG_PHYS_64BIT
  78 #define CONFIG_ADDR_MAP                 1
  79 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  80 #endif
  81
  82 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  83 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  84 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  85
  86 /*
  87  * Config the L2 Cache as L2 SRAM
  88  */
  89 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  90 #ifdef CONFIG_PHYS_64BIT
  91 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  92 #else
  93 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  94 #endif
  95 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  96 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  97
  98 #define CONFIG_SYS_CCSRBAR              0xffe00000
  99 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 100
 101 #if defined(CONFIG_NAND_SPL)
 102 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 103 #endif
 104
 105 /* DDR Setup */
 106 #define CONFIG_VERY_BIG_RAM
 107 #define CONFIG_SYS_FSL_DDR2
 108 #undef CONFIG_FSL_DDR_INTERACTIVE
 109 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 110 #define CONFIG_DDR_SPD
 111
 112 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 113 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 114
 115 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 116 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 117
 118 #define CONFIG_NUM_DDR_CONTROLLERS      1
 119 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 120 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 121
 122 /* I2C addresses of SPD EEPROMs */
 123 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 124 #define CONFIG_SYS_SPD_BUS_NUM          1
 125
 126 /* These are used when DDR doesn't use SPD. */
 127 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 128 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 129 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 130 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 131 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 132 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 133 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 134 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 135 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 136 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 137 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 138 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 139 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 140 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 141 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 142 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 143
 144 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 145 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 146 #define CONFIG_SYS_DDR_SBE              0x00010000
 147
 148 /* Make sure required options are set */
 149 #ifndef CONFIG_SPD_EEPROM
 150 #error ("CONFIG_SPD_EEPROM is required")
 151 #endif
 152
 153 #undef CONFIG_CLOCKS_IN_MHZ
 154
 155 /*
 156  * Memory map -- xxx -this is wrong, needs updating
 157  *
 158  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 159  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 160  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 161  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 162  *
 163  * Localbus cacheable (TBD)
 164  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 165  *
 166  * Localbus non-cacheable
 167  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 168  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 169  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 170  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 171  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 172  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 173  */
 174
 175 /*
 176  * Local Bus Definitions
 177  */
 178 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 179 #ifdef CONFIG_PHYS_64BIT
 180 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 181 #else
 182 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 183 #endif
 184
 185 #define CONFIG_FLASH_BR_PRELIM \
 186         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 187 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 188
 189 #define CONFIG_SYS_BR1_PRELIM \
 190                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 191                  | BR_PS_16 | BR_V)
 192 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 193
 194 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 195                                       CONFIG_SYS_FLASH_BASE_PHYS }
 196 #define CONFIG_SYS_FLASH_QUIET_TEST
 197 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 198
 199 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 200 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 201 #undef  CONFIG_SYS_FLASH_CHECKSUM
 202 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 203 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 204
 205 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 206 #define CONFIG_SYS_RAMBOOT
 207 #define CONFIG_SYS_EXTRA_ENV_RELOC
 208 #else
 209 #undef CONFIG_SYS_RAMBOOT
 210 #endif
 211
 212 #define CONFIG_FLASH_CFI_DRIVER
 213 #define CONFIG_SYS_FLASH_CFI
 214 #define CONFIG_SYS_FLASH_EMPTY_INFO
 215 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 216
 217 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 218
 219 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 220 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 221 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 222 #ifdef CONFIG_PHYS_64BIT
 223 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 224 #else
 225 #define PIXIS_BASE_PHYS PIXIS_BASE
 226 #endif
 227
 228 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 229 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 230
 231 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 232 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 233 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 234 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 235 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 236 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 237 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 238 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 239 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 240 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 241 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 242 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 243 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 244 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 245 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 246 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 247 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 248 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 249 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 250 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 251 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 252 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 253 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 254 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 255 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 256 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 257 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 258 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 259 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 260 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 261 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 262 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 263 #define PIXIS_LED               0x25    /* LED Register */
 264
 265 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 266
 267 /* old pixis referenced names */
 268 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 269 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 270 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 271
 272 #define CONFIG_SYS_INIT_RAM_LOCK        1
 273 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 274 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 275
 276 #define CONFIG_SYS_GBL_DATA_OFFSET \
 277                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 278 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 279
 280 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 281 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 282
 283 #ifndef CONFIG_NAND_SPL
 284 #define CONFIG_SYS_NAND_BASE            0xffa00000
 285 #ifdef CONFIG_PHYS_64BIT
 286 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 287 #else
 288 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 289 #endif
 290 #else
 291 #define CONFIG_SYS_NAND_BASE            0xfff00000
 292 #ifdef CONFIG_PHYS_64BIT
 293 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 294 #else
 295 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 296 #endif
 297 #endif
 298 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 299                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 300                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 301                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 302 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 303 #define CONFIG_CMD_NAND         1
 304 #define CONFIG_NAND_FSL_ELBC    1
 305 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 306
 307 /* NAND boot: 4K NAND loader config */
 308 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 309 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 310 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 311 #define CONFIG_SYS_NAND_U_BOOT_START \
 312                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 313 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 314 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 315 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 316
 317 /* NAND flash config */
 318 #define CONFIG_SYS_NAND_BR_PRELIM \
 319                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 320                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 321                 | BR_PS_8               /* Port Size = 8 bit */ \
 322                 | BR_MS_FCM             /* MSEL = FCM */ \
 323                 | BR_V)                 /* valid */
 324 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 325                 | OR_FCM_PGS            /* Large Page*/ \
 326                 | OR_FCM_CSCT \
 327                 | OR_FCM_CST \
 328                 | OR_FCM_CHT \
 329                 | OR_FCM_SCY_1 \
 330                 | OR_FCM_TRLX \
 331                 | OR_FCM_EHTR)
 332
 333 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 334 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 335 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 336 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 337
 338 #define CONFIG_SYS_BR4_PRELIM \
 339                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 340                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 341                 | BR_PS_8               /* Port Size = 8 bit */ \
 342                 | BR_MS_FCM             /* MSEL = FCM */ \
 343                 | BR_V)                 /* valid */
 344 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 345 #define CONFIG_SYS_BR5_PRELIM \
 346                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 347                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 348                 | BR_PS_8               /* Port Size = 8 bit */ \
 349                 | BR_MS_FCM             /* MSEL = FCM */ \
 350                 | BR_V)                 /* valid */
 351 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 352
 353 #define CONFIG_SYS_BR6_PRELIM \
 354                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 355                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 356                 | BR_PS_8               /* Port Size = 8 bit */ \
 357                 | BR_MS_FCM             /* MSEL = FCM */ \
 358                 | BR_V)                 /* valid */
 359 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 360
 361 /* Serial Port - controlled on board with jumper J8
 362  * open - index 2
 363  * shorted - index 1
 364  */
 365 #define CONFIG_CONS_INDEX       1
 366 #define CONFIG_SYS_NS16550_SERIAL
 367 #define CONFIG_SYS_NS16550_REG_SIZE     1
 368 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 369 #ifdef CONFIG_NAND_SPL
 370 #define CONFIG_NS16550_MIN_FUNCTIONS
 371 #endif
 372
 373 #define CONFIG_SYS_BAUDRATE_TABLE       \
 374         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 375
 376 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 377 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 378
 379 /*
 380  * I2C
 381  */
 382 #define CONFIG_SYS_I2C
 383 #define CONFIG_SYS_I2C_FSL
 384 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 385 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 386 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 387 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 388 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 389 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 390 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 391
 392 /*
 393  * I2C2 EEPROM
 394  */
 395 #define CONFIG_ID_EEPROM
 396 #ifdef CONFIG_ID_EEPROM
 397 #define CONFIG_SYS_I2C_EEPROM_NXID
 398 #endif
 399 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 400 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 401 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 402
 403 /*
 404  * eSPI - Enhanced SPI
 405  */
 406 #define CONFIG_HARD_SPI
 407
 408 #if defined(CONFIG_SPI_FLASH)
 409 #define CONFIG_SF_DEFAULT_SPEED 10000000
 410 #define CONFIG_SF_DEFAULT_MODE  0
 411 #endif
 412
 413 /*
 414  * General PCI
 415  * Memory space is mapped 1-1, but I/O space must start from 0.
 416  */
 417
 418 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 419 #ifdef CONFIG_PHYS_64BIT
 420 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 421 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 422 #else
 423 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 424 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 425 #endif
 426 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 427 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 428 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 429 #ifdef CONFIG_PHYS_64BIT
 430 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 431 #else
 432 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 433 #endif
 434 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 435
 436 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 437 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 438 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 439 #ifdef CONFIG_PHYS_64BIT
 440 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 441 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 442 #else
 443 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 444 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 445 #endif
 446 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 447 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 448 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 451 #else
 452 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 453 #endif
 454 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 455
 456 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 457 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 458 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 461 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 462 #else
 463 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 464 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 465 #endif
 466 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 467 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 468 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 471 #else
 472 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 473 #endif
 474 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 475
 476 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 477 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 478 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 479 #ifdef CONFIG_PHYS_64BIT
 480 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 481 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 482 #else
 483 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 484 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 485 #endif
 486 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 487 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 488 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 489 #ifdef CONFIG_PHYS_64BIT
 490 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 491 #else
 492 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 493 #endif
 494 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 495
 496 #if defined(CONFIG_PCI)
 497
 498 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 499
 500 /*PCIE video card used*/
 501 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 502
 503 /*PCI video card used*/
 504 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 505
 506 /* video */
 507 #define CONFIG_VIDEO
 508
 509 #if defined(CONFIG_VIDEO)
 510 #define CONFIG_BIOSEMU
 511 #define CONFIG_CFB_CONSOLE
 512 #define CONFIG_VIDEO_SW_CURSOR
 513 #define CONFIG_VGA_AS_SINGLE_DEVICE
 514 #define CONFIG_ATI_RADEON_FB
 515 #define CONFIG_VIDEO_LOGO
 516 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 517 #endif
 518
 519 #undef CONFIG_EEPRO100
 520 #undef CONFIG_TULIP
 521
 522 #ifndef CONFIG_PCI_PNP
 523         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 524         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 525         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 526 #endif
 527
 528 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 529
 530 #endif  /* CONFIG_PCI */
 531
 532 /* SATA */
 533 #define CONFIG_LIBATA
 534 #define CONFIG_FSL_SATA
 535
 536 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 537 #define CONFIG_SATA1
 538 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 539 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 540 #define CONFIG_SATA2
 541 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 542 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 543
 544 #ifdef CONFIG_FSL_SATA
 545 #define CONFIG_LBA48
 546 #define CONFIG_CMD_SATA
 547 #define CONFIG_DOS_PARTITION
 548 #endif
 549
 550 #if defined(CONFIG_TSEC_ENET)
 551
 552 #define CONFIG_MII              1       /* MII PHY management */
 553 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 554 #define CONFIG_TSEC1    1
 555 #define CONFIG_TSEC1_NAME       "eTSEC1"
 556 #define CONFIG_TSEC3    1
 557 #define CONFIG_TSEC3_NAME       "eTSEC3"
 558
 559 #define CONFIG_FSL_SGMII_RISER  1
 560 #define SGMII_RISER_PHY_OFFSET  0x1c
 561
 562 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 563 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 564
 565 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 566 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 567
 568 #define TSEC1_PHYIDX            0
 569 #define TSEC3_PHYIDX            0
 570
 571 #define CONFIG_ETHPRIME         "eTSEC1"
 572
 573 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 574
 575 #endif  /* CONFIG_TSEC_ENET */
 576
 577 /*
 578  * Environment
 579  */
 580
 581 #if defined(CONFIG_SYS_RAMBOOT)
 582 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 583 #define CONFIG_ENV_IS_IN_SPI_FLASH
 584 #define CONFIG_ENV_SPI_BUS      0
 585 #define CONFIG_ENV_SPI_CS       0
 586 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 587 #define CONFIG_ENV_SPI_MODE     0
 588 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 589 #define CONFIG_ENV_OFFSET       0xF0000
 590 #define CONFIG_ENV_SECT_SIZE    0x10000
 591 #elif defined(CONFIG_RAMBOOT_SDCARD)
 592 #define CONFIG_ENV_IS_IN_MMC
 593 #define CONFIG_FSL_FIXED_MMC_LOCATION
 594 #define CONFIG_ENV_SIZE         0x2000
 595 #define CONFIG_SYS_MMC_ENV_DEV  0
 596 #else
 597         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 598         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 599         #define CONFIG_ENV_SIZE         0x2000
 600 #endif
 601 #else
 602         #define CONFIG_ENV_IS_IN_FLASH  1
 603         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 604         #define CONFIG_ENV_SIZE         0x2000
 605         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 606 #endif
 607
 608 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 609 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 610
 611 /*
 612  * Command line configuration.
 613  */
 614 #define CONFIG_CMD_IRQ
 615 #define CONFIG_CMD_IRQ
 616 #define CONFIG_CMD_REGINFO
 617
 618 #if defined(CONFIG_PCI)
 619 #define CONFIG_CMD_PCI
 620 #endif
 621
 622 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 623
 624 #define CONFIG_MMC     1
 625
 626 #ifdef CONFIG_MMC
 627 #define CONFIG_FSL_ESDHC
 628 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 629 #define CONFIG_GENERIC_MMC
 630 #endif
 631
 632 /*
 633  * USB
 634  */
 635 #define CONFIG_HAS_FSL_MPH_USB
 636 #ifdef CONFIG_HAS_FSL_MPH_USB
 637 #define CONFIG_USB_EHCI
 638
 639 #ifdef CONFIG_USB_EHCI
 640 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 641 #define CONFIG_USB_EHCI_FSL
 642 #define CONFIG_USB_STORAGE
 643 #endif
 644 #endif
 645
 646 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 647 #define CONFIG_DOS_PARTITION
 648 #endif
 649
 650 /*
 651  * Miscellaneous configurable options
 652  */
 653 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 654 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 655 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 656 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 657 #if defined(CONFIG_CMD_KGDB)
 658 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 659 #else
 660 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 661 #endif
 662 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 663                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 664 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 665 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 666
 667 /*
 668  * For booting Linux, the board info and command line data
 669  * have to be in the first 64 MB of memory, since this is
 670  * the maximum mapped by the Linux kernel during initialization.
 671  */
 672 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 673 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 674
 675 #if defined(CONFIG_CMD_KGDB)
 676 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 677 #endif
 678
 679 /*
 680  * Environment Configuration
 681  */
 682
 683 /* The mac addresses for all ethernet interface */
 684 #if defined(CONFIG_TSEC_ENET)
 685 #define CONFIG_HAS_ETH0
 686 #define CONFIG_HAS_ETH1
 687 #define CONFIG_HAS_ETH2
 688 #define CONFIG_HAS_ETH3
 689 #endif
 690
 691 #define CONFIG_IPADDR           192.168.1.254
 692
 693 #define CONFIG_HOSTNAME         unknown
 694 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 695 #define CONFIG_BOOTFILE         "uImage"
 696 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 697
 698 #define CONFIG_SERVERIP         192.168.1.1
 699 #define CONFIG_GATEWAYIP        192.168.1.1
 700 #define CONFIG_NETMASK          255.255.255.0
 701
 702 /* default location for tftp and bootm */
 703 #define CONFIG_LOADADDR         1000000
 704
 705 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 706
 707 #define CONFIG_BAUDRATE 115200
 708
 709 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 710 "netdev=eth0\0"                                         \
 711 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 712 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 713         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 714                 " +$filesize; " \
 715         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 716                 " +$filesize; " \
 717         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 718                 " $filesize; "  \
 719         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 720                 " +$filesize; " \
 721         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 722                 " $filesize\0"  \
 723 "consoledev=ttyS0\0"                            \
 724 "ramdiskaddr=2000000\0"                 \
 725 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 726 "fdtaddr=1e00000\0"                             \
 727 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 728 "bdev=sda3\0"                                   \
 729 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 730
 731 #define CONFIG_HDBOOT                           \
 732  "setenv bootargs root=/dev/$bdev rw "          \
 733  "console=$consoledev,$baudrate $othbootargs;"  \
 734  "tftp $loadaddr $bootfile;"                    \
 735  "tftp $fdtaddr $fdtfile;"                      \
 736  "bootm $loadaddr - $fdtaddr"
 737
 738 #define CONFIG_NFSBOOTCOMMAND           \
 739  "setenv bootargs root=/dev/nfs rw "    \
 740  "nfsroot=$serverip:$rootpath "         \
 741  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 742  "console=$consoledev,$baudrate $othbootargs;"  \
 743  "tftp $loadaddr $bootfile;"            \
 744  "tftp $fdtaddr $fdtfile;"              \
 745  "bootm $loadaddr - $fdtaddr"
 746
 747 #define CONFIG_RAMBOOTCOMMAND           \
 748  "setenv bootargs root=/dev/ram rw "    \
 749  "console=$consoledev,$baudrate $othbootargs;"  \
 750  "tftp $ramdiskaddr $ramdiskfile;"      \
 751  "tftp $loadaddr $bootfile;"            \
 752  "tftp $fdtaddr $fdtfile;"              \
 753  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 754
 755 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 756
 757 #endif  /* __CONFIG_H */