include/configs/MPC8641HPCN.h

   1 /*
   2  * Copyright 2006, 2010 Freescale Semiconductor.
   3  *
   4  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * MPC8641HPCN board configuration file
  27  *
  28  * Make sure you change the MAC address and other network params first,
  29  * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
  30  */
  31
  32 #ifndef __CONFIG_H
  33 #define __CONFIG_H
  34
  35 /* High Level Configuration Options */
  36 #define CONFIG_MPC86xx          1       /* MPC86xx */
  37 #define CONFIG_MPC8641          1       /* MPC8641 specific */
  38 #define CONFIG_MPC8641HPCN      1       /* MPC8641HPCN board specific */
  39 #define CONFIG_MP               1       /* support multiple processors */
  40 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  41 /*#define CONFIG_PHYS_64BIT     1*/     /* Place devices in 36-bit space */
  42 #define CONFIG_ADDR_MAP         1       /* Use addr map */
  43
  44 /*
  45  * default CCSRBAR is at 0xff700000
  46  * assume U-Boot is less than 0.5MB
  47  */
  48 #define CONFIG_SYS_TEXT_BASE    0xeff00000
  49
  50 #ifdef RUN_DIAG
  51 #define CONFIG_SYS_DIAG_ADDR         CONFIG_SYS_FLASH_BASE
  52 #endif
  53
  54 /*
  55  * virtual address to be used for temporary mappings.  There
  56  * should be 128k free at this VA.
  57  */
  58 #define CONFIG_SYS_SCRATCH_VA   0xe0000000
  59
  60 /*
  61  * set this to enable Rapid IO.  PCI and RIO are mutually exclusive
  62  */
  63 /*#define CONFIG_RIO            1*/
  64
  65 #ifndef CONFIG_RIO                      /* RIO/PCI are mutually exclusive */
  66 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  67 #define CONFIG_PCIE1            1       /* PCIE controler 1 (ULI bridge) */
  68 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot) */
  69 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  70 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  71 #endif
  72 #define CONFIG_FSL_LAW          1       /* Use common FSL law init code */
  73
  74 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  75 #define CONFIG_ENV_OVERWRITE
  76
  77 #define CONFIG_BAT_RW           1       /* Use common BAT rw code */
  78 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  79 #define CONFIG_SYS_NUM_ADDR_MAP 8       /* Number of addr map slots = 8 dbats */
  80
  81 #define CONFIG_ALTIVEC          1
  82
  83 /*
  84  * L2CR setup -- make sure this is right for your board!
  85  */
  86 #define CONFIG_SYS_L2
  87 #define L2_INIT         0
  88 #define L2_ENABLE       (L2CR_L2E)
  89
  90 #ifndef CONFIG_SYS_CLK_FREQ
  91 #ifndef __ASSEMBLY__
  92 extern unsigned long get_board_sys_clk(unsigned long dummy);
  93 #endif
  94 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  95 #endif
  96
  97 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  98
  99 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest region */
 100 #define CONFIG_SYS_MEMTEST_END          0x00400000
 101
 102 /*
 103  * With the exception of PCI Memory and Rapid IO, most devices will simply
 104  * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA
 105  * when 36-bit is enabled.  When 36-bit is not enabled, these bits are 0.
 106  */
 107 #ifdef CONFIG_PHYS_64BIT
 108 #define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f00000000ULL
 109 #else
 110 #define CONFIG_SYS_PHYS_ADDR_HIGH 0x0
 111 #endif
 112
 113 /*
 114  * Base addresses -- Note these are effective addresses where the
 115  * actual resources get mapped (not physical addresses)
 116  */
 117 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
 118 #define CONFIG_SYS_CCSRBAR              0xffe00000      /* relocated CCSRBAR */
 119 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 120
 121 /* Physical addresses */
 122 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 123 #ifdef CONFIG_PHYS_64BIT
 124 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0xf
 125 #define CONFIG_SYS_CCSRBAR_PHYS         (CONFIG_SYS_CCSRBAR_PHYS_LOW \
 126                                          | ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32))
 127 #else
 128 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
 129 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR_PHYS_LOW
 130 #endif
 131
 132 #define CONFIG_HWCONFIG /* use hwconfig to control memory interleaving */
 133
 134 /*
 135  * DDR Setup
 136  */
 137 #define CONFIG_FSL_DDR2
 138 #undef CONFIG_FSL_DDR_INTERACTIVE
 139 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 140 #define CONFIG_DDR_SPD
 141
 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 143 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 144
 145 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
 146 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 147 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
 148 #define CONFIG_VERY_BIG_RAM
 149
 150 #define CONFIG_NUM_DDR_CONTROLLERS      2
 151 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 152 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 153
 154 /*
 155  * I2C addresses of SPD EEPROMs
 156  */
 157 #define SPD_EEPROM_ADDRESS1     0x51    /* CTLR 0 DIMM 0 */
 158 #define SPD_EEPROM_ADDRESS2     0x52    /* CTLR 0 DIMM 1 */
 159 #define SPD_EEPROM_ADDRESS3     0x53    /* CTLR 1 DIMM 0 */
 160 #define SPD_EEPROM_ADDRESS4     0x54    /* CTLR 1 DIMM 1 */
 161
 162
 163 /*
 164  * These are used when DDR doesn't use SPD.
 165  */
 166 #define CONFIG_SYS_SDRAM_SIZE           256             /* DDR is 256MB */
 167 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F
 168 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102      /* Enable, no interleaving */
 169 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 170 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 171 #define CONFIG_SYS_DDR_TIMING_1 0x39357322
 172 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 173 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 174 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 175 #define CONFIG_SYS_DDR_INTERVAL 0x06090100
 176 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 177 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 178 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 179 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 180 #define CONFIG_SYS_DDR_CONTROL          0xe3008000      /* Type = DDR2 */
 181 #define CONFIG_SYS_DDR_CONTROL2 0x04400000
 182
 183 #define CONFIG_ID_EEPROM
 184 #define CONFIG_SYS_I2C_EEPROM_NXID
 185 #define CONFIG_ID_EEPROM
 186 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 187 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 188
 189 #define CONFIG_SYS_FLASH_BASE           0xef800000     /* start of FLASH 8M */
 190 #define CONFIG_SYS_FLASH_BASE_PHYS      (CONFIG_SYS_FLASH_BASE \
 191                                          | CONFIG_SYS_PHYS_ADDR_HIGH)
 192
 193 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
 194
 195 #define CONFIG_SYS_BR0_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 196                                  | 0x00001001)  /* port size 16bit */
 197 #define CONFIG_SYS_OR0_PRELIM   0xff806ff7      /* 8MB Boot Flash area*/
 198
 199 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(CF_BASE_PHYS)             \
 200                                  | 0x00001001)  /* port size 16bit */
 201 #define CONFIG_SYS_OR2_PRELIM   0xffffeff7      /* 32k Compact Flash */
 202
 203 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS)  \
 204                                  | 0x00000801) /* port size 8bit */
 205 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32k PIXIS area*/
 206
 207 /*
 208  * The LBC_BASE is the base of the region that contains the PIXIS and the CF.
 209  * The PIXIS and CF by themselves aren't large enough to take up the 128k
 210  * required for the smallest BAT mapping, so there's a 64k hole.
 211  */
 212 #define CONFIG_SYS_LBC_BASE             0xffde0000
 213 #define CONFIG_SYS_LBC_BASE_PHYS        (CONFIG_SYS_LBC_BASE \
 214                                          | CONFIG_SYS_PHYS_ADDR_HIGH)
 215
 216 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 217 #define PIXIS_BASE              (CONFIG_SYS_LBC_BASE + 0x00010000)
 218 #define PIXIS_BASE_PHYS         (CONFIG_SYS_LBC_BASE_PHYS + 0x00010000)
 219 #define PIXIS_SIZE              0x00008000      /* 32k */
 220 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 221 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 222 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 223 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 224 #define PIXIS_AUX               0x6     /* PIXIS Auxiliary register; Scratch register */
 225 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 226 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 227 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 228 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 229 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 230 #define PIXIS_VBOOT_FMAP        0x80    /* VBOOT - CFG_FLASHMAP */
 231 #define PIXIS_VBOOT_FBANK       0x40    /* VBOOT - CFG_FLASHBANK */
 232 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 233 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 234 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 235 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 236 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x40    /* Reset altbank mask*/
 237
 238 /* Compact flash shares a BAT with PIXIS; make sure they're contiguous */
 239 #define CF_BASE                 (PIXIS_BASE + PIXIS_SIZE)
 240 #define CF_BASE_PHYS            (PIXIS_BASE_PHYS + PIXIS_SIZE)
 241
 242 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 243 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 244
 245 #undef  CONFIG_SYS_FLASH_CHECKSUM
 246 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 247 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 248 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 249 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 250
 251 #define CONFIG_FLASH_CFI_DRIVER
 252 #define CONFIG_SYS_FLASH_CFI
 253 #define CONFIG_SYS_FLASH_EMPTY_INFO
 254
 255 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 256 #define CONFIG_SYS_RAMBOOT
 257 #else
 258 #undef  CONFIG_SYS_RAMBOOT
 259 #endif
 260
 261 #if defined(CONFIG_SYS_RAMBOOT)
 262 #undef CONFIG_SPD_EEPROM
 263 #define CONFIG_SYS_SDRAM_SIZE   256
 264 #endif
 265
 266 #undef CONFIG_CLOCKS_IN_MHZ
 267
 268 #define CONFIG_SYS_INIT_RAM_LOCK        1
 269 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 270 #define CONFIG_SYS_INIT_RAM_ADDR        0x0fd00000      /* Initial RAM address */
 271 #else
 272 #define CONFIG_SYS_INIT_RAM_ADDR        0xf8400000      /* Initial RAM address */
 273 #endif
 274 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000          /* Size of used area in RAM */
 275
 276 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 277 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 278
 279 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Mon */
 280 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)    /* Reserved for malloc */
 281
 282 /* Serial Port */
 283 #define CONFIG_CONS_INDEX     1
 284 #define CONFIG_SYS_NS16550
 285 #define CONFIG_SYS_NS16550_SERIAL
 286 #define CONFIG_SYS_NS16550_REG_SIZE     1
 287 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 288
 289 #define CONFIG_SYS_BAUDRATE_TABLE  \
 290         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 291
 292 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 293 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 294
 295 /* Use the HUSH parser */
 296 #define CONFIG_SYS_HUSH_PARSER
 297 #ifdef  CONFIG_SYS_HUSH_PARSER
 298 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 299 #endif
 300
 301 /*
 302  * Pass open firmware flat tree to kernel
 303  */
 304 #define CONFIG_OF_LIBFDT                1
 305 #define CONFIG_OF_BOARD_SETUP           1
 306 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 307
 308 /*
 309  * I2C
 310  */
 311 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 312 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 313 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 314 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 315 #define CONFIG_SYS_I2C_SLAVE            0x7F
 316 #define CONFIG_SYS_I2C_NOPROBES {0x69}  /* Don't probe these addrs */
 317 #define CONFIG_SYS_I2C_OFFSET           0x3100
 318
 319 /*
 320  * RapidIO MMU
 321  */
 322 #define CONFIG_SYS_RIO_MEM_BASE 0x80000000      /* base address */
 323 #ifdef CONFIG_PHYS_64BIT
 324 #define CONFIG_SYS_RIO_MEM_PHYS  0x0000000c00000000ULL
 325 #else
 326 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
 327 #endif
 328 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000      /* 128M */
 329
 330 /*
 331  * General PCI
 332  * Addresses are mapped 1-1.
 333  */
 334
 335 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 336 #ifdef CONFIG_PHYS_64BIT
 337 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 338 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x0000000c00000000ULL
 339 #else
 340 #define CONFIG_SYS_PCIE1_MEM_BUS        CONFIG_SYS_PCIE1_MEM_VIRT
 341 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_VIRT
 342 #endif
 343 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 344 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 345 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 346 #define CONFIG_SYS_PCIE1_IO_PHYS        (CONFIG_SYS_PCIE1_IO_VIRT \
 347                                  | CONFIG_SYS_PHYS_ADDR_HIGH)
 348 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64K */
 349
 350 #ifdef CONFIG_PHYS_64BIT
 351 /*
 352  * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT.
 353  * This will increase the amount of PCI address space available for
 354  * for mapping RAM.
 355  */
 356 #define CONFIG_SYS_PCIE2_MEM_BUS        CONFIG_SYS_PCIE1_MEM_BUS
 357 #else
 358 #define CONFIG_SYS_PCIE2_MEM_BUS        (CONFIG_SYS_PCIE1_MEM_BUS \
 359                                          + CONFIG_SYS_PCIE1_MEM_SIZE)
 360 #endif
 361 #define CONFIG_SYS_PCIE2_MEM_VIRT       (CONFIG_SYS_PCIE1_MEM_VIRT \
 362                                          + CONFIG_SYS_PCIE1_MEM_SIZE)
 363 #define CONFIG_SYS_PCIE2_MEM_PHYS       (CONFIG_SYS_PCIE1_MEM_PHYS \
 364                                          + CONFIG_SYS_PCIE1_MEM_SIZE)
 365 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 366 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 367 #define CONFIG_SYS_PCIE2_IO_VIRT        (CONFIG_SYS_PCIE1_IO_VIRT \
 368                                          + CONFIG_SYS_PCIE1_IO_SIZE)
 369 #define CONFIG_SYS_PCIE2_IO_PHYS        (CONFIG_SYS_PCIE1_IO_PHYS \
 370                                          + CONFIG_SYS_PCIE1_IO_SIZE)
 371 #define CONFIG_SYS_PCIE2_IO_SIZE        CONFIG_SYS_PCIE1_IO_SIZE
 372
 373 #if defined(CONFIG_PCI)
 374
 375 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 376
 377 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 378
 379 #define CONFIG_NET_MULTI
 380 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 381
 382 #define CONFIG_RTL8139
 383
 384 #undef CONFIG_EEPRO100
 385 #undef CONFIG_TULIP
 386
 387 /************************************************************
 388  * USB support
 389  ************************************************************/
 390 #define CONFIG_PCI_OHCI                 1
 391 #define CONFIG_USB_OHCI_NEW             1
 392 #define CONFIG_USB_KEYBOARD             1
 393 #define CONFIG_SYS_STDIO_DEREGISTER
 394 #define CONFIG_SYS_USB_EVENT_POLL               1
 395 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "ohci_pci"
 396 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 397 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
 398
 399 /*PCIE video card used*/
 400 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE2_IO_VIRT
 401
 402 /*PCI video card used*/
 403 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCIE1_IO_VIRT*/
 404
 405 /* video */
 406 #define CONFIG_VIDEO
 407
 408 #if defined(CONFIG_VIDEO)
 409 #define CONFIG_BIOSEMU
 410 #define CONFIG_CFB_CONSOLE
 411 #define CONFIG_VIDEO_SW_CURSOR
 412 #define CONFIG_VGA_AS_SINGLE_DEVICE
 413 #define CONFIG_ATI_RADEON_FB
 414 #define CONFIG_VIDEO_LOGO
 415 /*#define CONFIG_CONSOLE_CURSOR*/
 416 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
 417 #endif
 418
 419 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 420
 421 #define CONFIG_DOS_PARTITION
 422 #define CONFIG_SCSI_AHCI
 423
 424 #ifdef CONFIG_SCSI_AHCI
 425 #define CONFIG_SATA_ULI5288
 426 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 427 #define CONFIG_SYS_SCSI_MAX_LUN 1
 428 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 429 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 430 #endif
 431
 432 #endif  /* CONFIG_PCI */
 433
 434 #if defined(CONFIG_TSEC_ENET)
 435
 436 #ifndef CONFIG_NET_MULTI
 437 #define CONFIG_NET_MULTI        1
 438 #endif
 439
 440 #define CONFIG_MII              1       /* MII PHY management */
 441
 442 #define CONFIG_TSEC1            1
 443 #define CONFIG_TSEC1_NAME       "eTSEC1"
 444 #define CONFIG_TSEC2            1
 445 #define CONFIG_TSEC2_NAME       "eTSEC2"
 446 #define CONFIG_TSEC3            1
 447 #define CONFIG_TSEC3_NAME       "eTSEC3"
 448 #define CONFIG_TSEC4            1
 449 #define CONFIG_TSEC4_NAME       "eTSEC4"
 450
 451 #define TSEC1_PHY_ADDR          0
 452 #define TSEC2_PHY_ADDR          1
 453 #define TSEC3_PHY_ADDR          2
 454 #define TSEC4_PHY_ADDR          3
 455 #define TSEC1_PHYIDX            0
 456 #define TSEC2_PHYIDX            0
 457 #define TSEC3_PHYIDX            0
 458 #define TSEC4_PHYIDX            0
 459 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 460 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 461 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 462 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 463
 464 #define CONFIG_ETHPRIME         "eTSEC1"
 465
 466 #endif  /* CONFIG_TSEC_ENET */
 467
 468 /*  Contort an addr into the format needed for BATs */
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define BAT_PHYS_ADDR(x)         ((unsigned long) \
 471                                   ((x & 0x00000000ffffffffULL) |        \
 472                                    ((x & 0x0000000e00000000ULL) >> 24) | \
 473                                    ((x & 0x0000000100000000ULL) >> 30)))
 474 #else
 475 #define BAT_PHYS_ADDR(x)        (x)
 476 #endif
 477
 478
 479 /* Put high physical address bits into the BAT format */
 480 #define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8)
 481 #define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2)
 482
 483 /*
 484  * BAT0         DDR
 485  */
 486 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 487 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 488
 489 /*
 490  * BAT1         LBC (PIXIS/CF)
 491  */
 492 #define CONFIG_SYS_DBAT1L       (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
 493                                  | BATL_PP_RW | BATL_CACHEINHIBIT | \
 494                                  BATL_GUARDEDSTORAGE)
 495 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_LBC_BASE | BATU_BL_128K \
 496                                  | BATU_VS | BATU_VP)
 497 #define CONFIG_SYS_IBAT1L       (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
 498                                  | BATL_PP_RW | BATL_MEMCOHERENCE)
 499 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 500
 501 /* if CONFIG_PCI:
 502  * BAT2         PCIE1 and PCIE1 MEM
 503  * if CONFIG_RIO
 504  * BAT2         Rapidio Memory
 505  */
 506 #ifdef CONFIG_PCI
 507 #define CONFIG_SYS_DBAT2L       (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
 508                                  | BATL_PP_RW | BATL_CACHEINHIBIT \
 509                                  | BATL_GUARDEDSTORAGE)
 510 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \
 511                                  | BATU_VS | BATU_VP)
 512 #define CONFIG_SYS_IBAT2L       (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
 513                                  | BATL_PP_RW | BATL_CACHEINHIBIT)
 514 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 515 #else /* CONFIG_RIO */
 516 #define CONFIG_SYS_DBAT2L       (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
 517                                  | BATL_PP_RW | BATL_CACHEINHIBIT | \
 518                                  BATL_GUARDEDSTORAGE)
 519 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \
 520                                  | BATU_VS | BATU_VP)
 521 #define CONFIG_SYS_IBAT2L       (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
 522                                  | BATL_PP_RW | BATL_CACHEINHIBIT)
 523
 524 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \
 525                         | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 526 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
 527 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 528 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 529 #endif
 530
 531 /*
 532  * BAT3         CCSR Space
 533  * This BAT is used early; don't use any macros with ULL - use HIGH/LOW pairs
 534  * instead.  The assembler chokes on ULL.
 535  */
 536 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR_PHYS_LOW \
 537                                  | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 538                                  | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 539                                  | BATL_PP_RW | BATL_CACHEINHIBIT \
 540                                  | BATL_GUARDEDSTORAGE)
 541 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \
 542                                  | BATU_VP)
 543 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR_PHYS_LOW \
 544                                  | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 545                                  | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
 546                                  | BATL_PP_RW | BATL_CACHEINHIBIT)
 547 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 548
 549 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 550 #define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 551                                        | BATL_PP_RW | BATL_CACHEINHIBIT \
 552                                        | BATL_GUARDEDSTORAGE)
 553 #define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
 554                                        | BATU_BL_1M | BATU_VS | BATU_VP)
 555 #define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 556                                        | BATL_PP_RW | BATL_CACHEINHIBIT)
 557 #define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
 558 #endif
 559
 560 /*
 561  * BAT4         PCIE1_IO and PCIE2_IO
 562  */
 563 #define CONFIG_SYS_DBAT4L       (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
 564                                  | BATL_PP_RW | BATL_CACHEINHIBIT \
 565                                  | BATL_GUARDEDSTORAGE)
 566 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \
 567                                  | BATU_VS | BATU_VP)
 568 #define CONFIG_SYS_IBAT4L       (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
 569                                  | BATL_PP_RW | BATL_CACHEINHIBIT)
 570 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 571
 572 /*
 573  * BAT5         Init RAM for stack in the CPU DCache (no backing memory)
 574  */
 575 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
 576 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 577 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 578 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 579
 580 /*
 581  * BAT6         FLASH
 582  */
 583 #define CONFIG_SYS_DBAT6L       (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 584                                  | BATL_PP_RW | BATL_CACHEINHIBIT \
 585                                  | BATL_GUARDEDSTORAGE)
 586 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \
 587                                  | BATU_VP)
 588 #define CONFIG_SYS_IBAT6L       (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 589                                  | BATL_PP_RW | BATL_MEMCOHERENCE)
 590 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 591
 592 /* Map the last 1M of flash where we're running from reset */
 593 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 594                                  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 595 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
 596 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 597                                  | BATL_MEMCOHERENCE)
 598 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 599
 600 /*
 601  * BAT7         FREE - used later for tmp mappings
 602  */
 603 #define CONFIG_SYS_DBAT7L 0x00000000
 604 #define CONFIG_SYS_DBAT7U 0x00000000
 605 #define CONFIG_SYS_IBAT7L 0x00000000
 606 #define CONFIG_SYS_IBAT7U 0x00000000
 607
 608 /*
 609  * Environment
 610  */
 611 #ifndef CONFIG_SYS_RAMBOOT
 612     #define CONFIG_ENV_IS_IN_FLASH      1
 613     #define CONFIG_ENV_ADDR             (CONFIG_SYS_MONITOR_BASE + 0x60000)
 614     #define CONFIG_ENV_SECT_SIZE                0x10000 /* 64K(one sector) for env */
 615 #else
 616     #define CONFIG_ENV_IS_NOWHERE       1       /* Store ENV in memory only */
 617     #define CONFIG_ENV_ADDR             (CONFIG_SYS_MONITOR_BASE - 0x1000)
 618 #endif
 619 #define CONFIG_ENV_SIZE         0x2000
 620
 621 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 622 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 623
 624
 625 /*
 626  * BOOTP options
 627  */
 628 #define CONFIG_BOOTP_BOOTFILESIZE
 629 #define CONFIG_BOOTP_BOOTPATH
 630 #define CONFIG_BOOTP_GATEWAY
 631 #define CONFIG_BOOTP_HOSTNAME
 632
 633
 634 /*
 635  * Command line configuration.
 636  */
 637 #include <config_cmd_default.h>
 638
 639 #define CONFIG_CMD_PING
 640 #define CONFIG_CMD_I2C
 641 #define CONFIG_CMD_REGINFO
 642
 643 #if defined(CONFIG_SYS_RAMBOOT)
 644     #undef CONFIG_CMD_SAVEENV
 645 #endif
 646
 647 #if defined(CONFIG_PCI)
 648     #define CONFIG_CMD_PCI
 649     #define CONFIG_CMD_SCSI
 650     #define CONFIG_CMD_EXT2
 651     #define CONFIG_CMD_USB
 652 #endif
 653
 654
 655 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 656
 657 /*
 658  * Miscellaneous configurable options
 659  */
 660 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 661 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 662 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 663 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 664
 665 #if defined(CONFIG_CMD_KGDB)
 666     #define CONFIG_SYS_CBSIZE   1024            /* Console I/O Buffer Size */
 667 #else
 668     #define CONFIG_SYS_CBSIZE   256             /* Console I/O Buffer Size */
 669 #endif
 670
 671 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 672 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 673 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 674 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 675
 676 /*
 677  * For booting Linux, the board info and command line data
 678  * have to be in the first 8 MB of memory, since this is
 679  * the maximum mapped by the Linux kernel during initialization.
 680  */
 681 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 682
 683 #if defined(CONFIG_CMD_KGDB)
 684     #define CONFIG_KGDB_BAUDRATE        230400  /* speed to run kgdb serial port */
 685     #define CONFIG_KGDB_SER_INDEX       2       /* which serial port to use */
 686 #endif
 687
 688 /*
 689  * Environment Configuration
 690  */
 691
 692 /* The mac addresses for all ethernet interface */
 693 #if defined(CONFIG_TSEC_ENET)
 694 #define CONFIG_ETHADDR   00:E0:0C:00:00:01
 695 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 696 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 697 #define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 698 #endif
 699
 700 #define CONFIG_HAS_ETH0         1
 701 #define CONFIG_HAS_ETH1         1
 702 #define CONFIG_HAS_ETH2         1
 703 #define CONFIG_HAS_ETH3         1
 704
 705 #define CONFIG_IPADDR           192.168.1.100
 706
 707 #define CONFIG_HOSTNAME         unknown
 708 #define CONFIG_ROOTPATH         /opt/nfsroot
 709 #define CONFIG_BOOTFILE         uImage
 710 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 711
 712 #define CONFIG_SERVERIP         192.168.1.1
 713 #define CONFIG_GATEWAYIP        192.168.1.1
 714 #define CONFIG_NETMASK          255.255.255.0
 715
 716 /* default location for tftp and bootm */
 717 #define CONFIG_LOADADDR         1000000
 718
 719 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 720 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 721
 722 #define CONFIG_BAUDRATE 115200
 723
 724 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 725         "netdev=eth0\0"                                                 \
 726         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
 727         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 728                 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
 729                 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
 730                 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
 731                 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
 732                 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
 733         "consoledev=ttyS0\0"                                            \
 734         "ramdiskaddr=2000000\0"                                         \
 735         "ramdiskfile=your.ramdisk.u-boot\0"                             \
 736         "fdtaddr=c00000\0"                                              \
 737         "fdtfile=mpc8641_hpcn.dtb\0"                                    \
 738         "en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0"                        \
 739         "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \
 740         "maxcpus=2"
 741
 742
 743 #define CONFIG_NFSBOOTCOMMAND                                           \
 744         "setenv bootargs root=/dev/nfs rw "                             \
 745               "nfsroot=$serverip:$rootpath "                            \
 746               "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 747               "console=$consoledev,$baudrate $othbootargs;"             \
 748         "tftp $loadaddr $bootfile;"                                     \
 749         "tftp $fdtaddr $fdtfile;"                                       \
 750         "bootm $loadaddr - $fdtaddr"
 751
 752 #define CONFIG_RAMBOOTCOMMAND                                           \
 753         "setenv bootargs root=/dev/ram rw "                             \
 754               "console=$consoledev,$baudrate $othbootargs;"             \
 755         "tftp $ramdiskaddr $ramdiskfile;"                               \
 756         "tftp $loadaddr $bootfile;"                                     \
 757         "tftp $fdtaddr $fdtfile;"                                       \
 758         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 759
 760 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 761
 762 #endif  /* __CONFIG_H */