include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P2041 RDB board configuration file
   9  * Also supports P2040 RDB
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  16 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  17 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  18 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
  19 #endif
  20
  21 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  22 /* Set 1M boot space */
  23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  24 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  25                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  26 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  27 #endif
  28
  29 /* High Level Configuration Options */
  30 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  31 #define CONFIG_MP                       /* support multiple processors */
  32
  33 #ifndef CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  35 #endif
  36
  37 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  38 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  39 #endif
  40
  41 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  42 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  43 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  44 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  45 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  46 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  47 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  48
  49 #define CONFIG_SYS_SRIO
  50 #define CONFIG_SRIO1                    /* SRIO port 1 */
  51 #define CONFIG_SRIO2                    /* SRIO port 2 */
  52 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  53 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  54
  55 #define CONFIG_ENV_OVERWRITE
  56
  57 #ifndef CONFIG_MTD_NOR_FLASH
  58 #else
  59 #define CONFIG_FLASH_CFI_DRIVER
  60 #define CONFIG_SYS_FLASH_CFI
  61 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  62 #endif
  63
  64 #if defined(CONFIG_SPIFLASH)
  65         #define CONFIG_SYS_EXTRA_ENV_RELOC
  66         #define CONFIG_ENV_SPI_BUS              0
  67         #define CONFIG_ENV_SPI_CS               0
  68         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  69         #define CONFIG_ENV_SPI_MODE             0
  70         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  71         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  72         #define CONFIG_ENV_SECT_SIZE            0x10000
  73 #elif defined(CONFIG_SDCARD)
  74         #define CONFIG_SYS_EXTRA_ENV_RELOC
  75         #define CONFIG_FSL_FIXED_MMC_LOCATION
  76         #define CONFIG_SYS_MMC_ENV_DEV          0
  77         #define CONFIG_ENV_SIZE                 0x2000
  78         #define CONFIG_ENV_OFFSET               (512 * 1658)
  79 #elif defined(CONFIG_NAND)
  80 #define CONFIG_SYS_EXTRA_ENV_RELOC
  81 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  82 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  83 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  84 #define CONFIG_ENV_ADDR         0xffe20000
  85 #define CONFIG_ENV_SIZE         0x2000
  86 #elif defined(CONFIG_ENV_IS_NOWHERE)
  87 #define CONFIG_ENV_SIZE         0x2000
  88 #else
  89         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
  90                         - CONFIG_ENV_SECT_SIZE)
  91         #define CONFIG_ENV_SIZE         0x2000
  92         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  93 #endif
  94
  95 #ifndef __ASSEMBLY__
  96 unsigned long get_board_sys_clk(unsigned long dummy);
  97 #endif
  98 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  99
 100 /*
 101  * These can be toggled for performance analysis, otherwise use default.
 102  */
 103 #define CONFIG_SYS_CACHE_STASHING
 104 #define CONFIG_BACKSIDE_L2_CACHE
 105 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 106 #define CONFIG_BTB                      /* toggle branch predition */
 107
 108 #define CONFIG_ENABLE_36BIT_PHYS
 109
 110 #ifdef CONFIG_PHYS_64BIT
 111 #define CONFIG_ADDR_MAP
 112 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 113 #endif
 114
 115 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 116 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 117 #define CONFIG_SYS_MEMTEST_END          0x00400000
 118 #define CONFIG_SYS_ALT_MEMTEST
 119
 120 /*
 121  *  Config the L3 Cache as L3 SRAM
 122  */
 123 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 124 #ifdef CONFIG_PHYS_64BIT
 125 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 126                 CONFIG_RAMBOOT_TEXT_BASE)
 127 #else
 128 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 129 #endif
 130 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 131 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 132
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_SYS_DCSRBAR              0xf0000000
 135 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 136 #endif
 137
 138 /* EEPROM */
 139 #define CONFIG_ID_EEPROM
 140 #define CONFIG_SYS_I2C_EEPROM_NXID
 141 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 142 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 143 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 144
 145 /*
 146  * DDR Setup
 147  */
 148 #define CONFIG_VERY_BIG_RAM
 149 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 150 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 151
 152 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 153 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 154
 155 #define CONFIG_DDR_SPD
 156
 157 #define CONFIG_SYS_SPD_BUS_NUM  0
 158 #define SPD_EEPROM_ADDRESS      0x52
 159 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 160
 161 /*
 162  * Local Bus Definitions
 163  */
 164
 165 /* Set the local bus clock 1/8 of platform clock */
 166 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 167
 168 /*
 169  * This board doesn't have a promjet connector.
 170  * However, it uses commone corenet board LAW and TLB.
 171  * It is necessary to use the same start address with proper offset.
 172  */
 173 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 174 #ifdef CONFIG_PHYS_64BIT
 175 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 176 #else
 177 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 178 #endif
 179
 180 #define CONFIG_SYS_FLASH_BR_PRELIM \
 181                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 182                 BR_PS_16 | BR_V)
 183 #define CONFIG_SYS_FLASH_OR_PRELIM \
 184                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 185                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 186
 187 #define CONFIG_FSL_CPLD
 188 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 189 #ifdef CONFIG_PHYS_64BIT
 190 #define CPLD_BASE_PHYS          0xfffdf0000ull
 191 #else
 192 #define CPLD_BASE_PHYS          CPLD_BASE
 193 #endif
 194
 195 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 196 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 197
 198 #define PIXIS_LBMAP_SWITCH      7
 199 #define PIXIS_LBMAP_MASK        0xf0
 200 #define PIXIS_LBMAP_SHIFT       4
 201 #define PIXIS_LBMAP_ALTBANK     0x40
 202
 203 #define CONFIG_SYS_FLASH_QUIET_TEST
 204 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 205
 206 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 207 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 208 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 209 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 210
 211 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 212
 213 #if defined(CONFIG_RAMBOOT_PBL)
 214 #define CONFIG_SYS_RAMBOOT
 215 #endif
 216
 217 #define CONFIG_NAND_FSL_ELBC
 218 /* Nand Flash */
 219 #ifdef CONFIG_NAND_FSL_ELBC
 220 #define CONFIG_SYS_NAND_BASE            0xffa00000
 221 #ifdef CONFIG_PHYS_64BIT
 222 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 223 #else
 224 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 225 #endif
 226
 227 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 228 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 229 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 230
 231 /* NAND flash config */
 232 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 233                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 234                                | BR_PS_8               /* Port Size = 8 bit */ \
 235                                | BR_MS_FCM             /* MSEL = FCM */ \
 236                                | BR_V)                 /* valid */
 237 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 238                                | OR_FCM_PGS            /* Large Page*/ \
 239                                | OR_FCM_CSCT \
 240                                | OR_FCM_CST \
 241                                | OR_FCM_CHT \
 242                                | OR_FCM_SCY_1 \
 243                                | OR_FCM_TRLX \
 244                                | OR_FCM_EHTR)
 245
 246 #ifdef CONFIG_NAND
 247 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 248 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 249 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 250 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 251 #else
 252 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 253 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 254 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 255 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 256 #endif
 257 #else
 258 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 259 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 260 #endif /* CONFIG_NAND_FSL_ELBC */
 261
 262 #define CONFIG_SYS_FLASH_EMPTY_INFO
 263 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 264 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 265
 266 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 267 #define CONFIG_MISC_INIT_R
 268
 269 #define CONFIG_HWCONFIG
 270
 271 /* define to use L1 as initial stack */
 272 #define CONFIG_L1_INIT_RAM
 273 #define CONFIG_SYS_INIT_RAM_LOCK
 274 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 275 #ifdef CONFIG_PHYS_64BIT
 276 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 277 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 278 /* The assembler doesn't like typecast */
 279 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 280         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 281           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 282 #else
 283 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 284 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 285 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 286 #endif
 287 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 288
 289 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 290                                         GENERATED_GBL_DATA_SIZE)
 291 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 292
 293 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 294 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 295
 296 /* Serial Port - controlled on board with jumper J8
 297  * open - index 2
 298  * shorted - index 1
 299  */
 300 #define CONFIG_CONS_INDEX       1
 301 #define CONFIG_SYS_NS16550_SERIAL
 302 #define CONFIG_SYS_NS16550_REG_SIZE     1
 303 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 304
 305 #define CONFIG_SYS_BAUDRATE_TABLE       \
 306         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 307
 308 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 309 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 310 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 311 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 312
 313 /* I2C */
 314 #define CONFIG_SYS_I2C
 315 #define CONFIG_SYS_I2C_FSL
 316 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 317 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 318 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 319 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 320 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 321 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 322
 323 /*
 324  * RapidIO
 325  */
 326 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 327 #ifdef CONFIG_PHYS_64BIT
 328 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 329 #else
 330 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 331 #endif
 332 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 333
 334 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 335 #ifdef CONFIG_PHYS_64BIT
 336 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 337 #else
 338 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 339 #endif
 340 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 341
 342 /*
 343  * for slave u-boot IMAGE instored in master memory space,
 344  * PHYS must be aligned based on the SIZE
 345  */
 346 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 347 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 348 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 349 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 350 /*
 351  * for slave UCODE and ENV instored in master memory space,
 352  * PHYS must be aligned based on the SIZE
 353  */
 354 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 355 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 356 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 357
 358 /* slave core release by master*/
 359 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 360 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 361
 362 /*
 363  * SRIO_PCIE_BOOT - SLAVE
 364  */
 365 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 366 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 367 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 368                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 369 #endif
 370
 371 /*
 372  * eSPI - Enhanced SPI
 373  */
 374 #define CONFIG_SF_DEFAULT_SPEED         10000000
 375 #define CONFIG_SF_DEFAULT_MODE          0
 376
 377 /*
 378  * General PCI
 379  * Memory space is mapped 1-1, but I/O space must start from 0.
 380  */
 381
 382 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 383 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 384 #ifdef CONFIG_PHYS_64BIT
 385 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 386 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 387 #else
 388 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 389 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 390 #endif
 391 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 392 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 393 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 394 #ifdef CONFIG_PHYS_64BIT
 395 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 396 #else
 397 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 398 #endif
 399 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 400
 401 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 402 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 403 #ifdef CONFIG_PHYS_64BIT
 404 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 405 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 406 #else
 407 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 408 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 409 #endif
 410 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 411 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 412 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 415 #else
 416 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 417 #endif
 418 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 419
 420 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 421 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 422 #ifdef CONFIG_PHYS_64BIT
 423 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 424 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 425 #else
 426 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 427 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 428 #endif
 429 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 430 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 431 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 434 #else
 435 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 436 #endif
 437 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 438
 439 /* Qman/Bman */
 440 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 441 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 442 #ifdef CONFIG_PHYS_64BIT
 443 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 444 #else
 445 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 446 #endif
 447 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 448 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 449 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 450 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 451 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 452 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 453                                         CONFIG_SYS_BMAN_CENA_SIZE)
 454 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 455 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 456 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 457 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 458 #ifdef CONFIG_PHYS_64BIT
 459 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 460 #else
 461 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 462 #endif
 463 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 464 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 465 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 466 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 467 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 468 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 469                                         CONFIG_SYS_QMAN_CENA_SIZE)
 470 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 471 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 472
 473 #define CONFIG_SYS_DPAA_FMAN
 474 #define CONFIG_SYS_DPAA_PME
 475 /* Default address of microcode for the Linux Fman driver */
 476 #if defined(CONFIG_SPIFLASH)
 477 /*
 478  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 479  * env, so we got 0x110000.
 480  */
 481 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 482 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 483 #elif defined(CONFIG_SDCARD)
 484 /*
 485  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 486  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 487  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 488  */
 489 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 490 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 491 #elif defined(CONFIG_NAND)
 492 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 493 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 494 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 495 /*
 496  * Slave has no ucode locally, it can fetch this from remote. When implementing
 497  * in two corenet boards, slave's ucode could be stored in master's memory
 498  * space, the address can be mapped from slave TLB->slave LAW->
 499  * slave SRIO or PCIE outbound window->master inbound window->
 500  * master LAW->the ucode address in master's memory space.
 501  */
 502 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 503 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 504 #else
 505 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 506 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 507 #endif
 508 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 509 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 510
 511 #ifdef CONFIG_SYS_DPAA_FMAN
 512 #define CONFIG_FMAN_ENET
 513 #define CONFIG_PHYLIB_10G
 514 #define CONFIG_PHY_VITESSE
 515 #define CONFIG_PHY_TERANETICS
 516 #endif
 517
 518 #ifdef CONFIG_PCI
 519 #define CONFIG_PCI_INDIRECT_BRIDGE
 520
 521 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 522 #endif  /* CONFIG_PCI */
 523
 524 /* SATA */
 525 #define CONFIG_FSL_SATA_V2
 526
 527 #ifdef CONFIG_FSL_SATA_V2
 528 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 529 #define CONFIG_SATA1
 530 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 531 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 532 #define CONFIG_SATA2
 533 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 534 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 535
 536 #define CONFIG_LBA48
 537 #endif
 538
 539 #ifdef CONFIG_FMAN_ENET
 540 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 541 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 542 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 543 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 544 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 545
 546 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 547 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 548 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 549 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 550
 551 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 552
 553 #define CONFIG_SYS_TBIPA_VALUE  8
 554 #define CONFIG_MII              /* MII PHY management */
 555 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 556 #endif
 557
 558 /*
 559  * Environment
 560  */
 561 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 562 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 563
 564 /*
 565  * Command line configuration.
 566  */
 567
 568 /*
 569 * USB
 570 */
 571 #define CONFIG_HAS_FSL_DR_USB
 572 #define CONFIG_HAS_FSL_MPH_USB
 573
 574 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 575 #define CONFIG_USB_EHCI_FSL
 576 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 577 #endif
 578
 579 #ifdef CONFIG_MMC
 580 #define CONFIG_FSL_ESDHC
 581 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 582 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 583 #endif
 584
 585 /*
 586  * Miscellaneous configurable options
 587  */
 588 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 589 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 590 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 591 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 592
 593 /*
 594  * For booting Linux, the board info and command line data
 595  * have to be in the first 64 MB of memory, since this is
 596  * the maximum mapped by the Linux kernel during initialization.
 597  */
 598 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 599 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 600
 601 #ifdef CONFIG_CMD_KGDB
 602 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 603 #endif
 604
 605 /*
 606  * Environment Configuration
 607  */
 608 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 609 #define CONFIG_BOOTFILE         "uImage"
 610 #define CONFIG_UBOOTPATH        u-boot.bin
 611
 612 /* default location for tftp and bootm */
 613 #define CONFIG_LOADADDR         1000000
 614
 615 #define __USB_PHY_TYPE  utmi
 616
 617 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 618         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 619         "bank_intlv=cs0_cs1\0"                                  \
 620         "netdev=eth0\0"                                         \
 621         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 622         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 623         "tftpflash=tftpboot $loadaddr $uboot && "               \
 624         "protect off $ubootaddr +$filesize && "                 \
 625         "erase $ubootaddr +$filesize && "                       \
 626         "cp.b $loadaddr $ubootaddr $filesize && "               \
 627         "protect on $ubootaddr +$filesize && "                  \
 628         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 629         "consoledev=ttyS0\0"                                    \
 630         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 631         "usb_dr_mode=host\0"                                    \
 632         "ramdiskaddr=2000000\0"                                 \
 633         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 634         "fdtaddr=1e00000\0"                                     \
 635         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 636         "bdev=sda3\0"
 637
 638 #define CONFIG_HDBOOT                                   \
 639         "setenv bootargs root=/dev/$bdev rw "           \
 640         "console=$consoledev,$baudrate $othbootargs;"   \
 641         "tftp $loadaddr $bootfile;"                     \
 642         "tftp $fdtaddr $fdtfile;"                       \
 643         "bootm $loadaddr - $fdtaddr"
 644
 645 #define CONFIG_NFSBOOTCOMMAND                   \
 646         "setenv bootargs root=/dev/nfs rw "     \
 647         "nfsroot=$serverip:$rootpath "          \
 648         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 649         "console=$consoledev,$baudrate $othbootargs;"   \
 650         "tftp $loadaddr $bootfile;"             \
 651         "tftp $fdtaddr $fdtfile;"               \
 652         "bootm $loadaddr - $fdtaddr"
 653
 654 #define CONFIG_RAMBOOTCOMMAND                           \
 655         "setenv bootargs root=/dev/ram rw "             \
 656         "console=$consoledev,$baudrate $othbootargs;"   \
 657         "tftp $ramdiskaddr $ramdiskfile;"               \
 658         "tftp $loadaddr $bootfile;"                     \
 659         "tftp $fdtaddr $fdtfile;"                       \
 660         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 661
 662 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 663
 664 #include <asm/fsl_secure_boot.h>
 665
 666 #endif  /* __CONFIG_H */