include/configs/Sandpoint8240.h

   1 /*
   2  * (C) Copyright 2001-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /* ------------------------------------------------------------------------- */
  25
  26 /*
  27  * board/config.h - configuration options, board specific
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37
  38 #define CONFIG_MPC824X          1
  39 #define CONFIG_MPC8240          1
  40 #define CONFIG_SANDPOINT        1
  41
  42 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  43
  44 #if 0
  45 #define USE_DINK32              1
  46 #else
  47 #undef USE_DINK32
  48 #endif
  49
  50 #define CONFIG_CONS_INDEX       1
  51 #define CONFIG_BAUDRATE         9600
  52
  53 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  54
  55 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  56
  57 #define CONFIG_PREBOOT  "echo;" \
  58         "echo Type \"run net_nfs\" to mount root filesystem over NFS;" \
  59         "echo"
  60
  61 #undef  CONFIG_BOOTARGS
  62
  63 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  64         "netdev=eth0\0"                                                 \
  65         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  66                 "nfsroot=${serverip}:${rootpath}\0"                     \
  67         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  68         "addip=setenv bootargs ${bootargs} "                            \
  69                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  70                 ":${hostname}:${netdev}:off panic=1\0"                  \
  71         "net_self=tftp ${kernel_addr} ${bootfile};"                     \
  72                 "tftp ${ramdisk_addr} ${ramdisk};"                      \
  73                 "run ramargs addip;"                                    \
  74                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  75         "net_nfs=tftp ${kernel_addr} ${bootfile};"                      \
  76                 "run nfsargs addip;bootm\0"                             \
  77         "rootpath=/opt/eldk/ppc_82xx\0"                                 \
  78         "bootfile=/tftpboot/SP8240/uImage\0"                            \
  79         "ramdisk=/tftpboot/SP8240/uRamdisk\0"                           \
  80         "kernel_addr=200000\0"                                          \
  81         "ramdisk_addr=400000\0"                                         \
  82         ""
  83 #define CONFIG_BOOTCOMMAND      "run flash_self"
  84
  85
  86 /*
  87  * BOOTP options
  88  */
  89 #define CONFIG_BOOTP_BOOTFILESIZE
  90 #define CONFIG_BOOTP_BOOTPATH
  91 #define CONFIG_BOOTP_GATEWAY
  92 #define CONFIG_BOOTP_HOSTNAME
  93
  94
  95 /*
  96  * Command line configuration.
  97  */
  98 #include <config_cmd_default.h>
  99
 100 #define CONFIG_CMD_DHCP
 101 #define CONFIG_CMD_ELF
 102 #define CONFIG_CMD_I2C
 103 #define CONFIG_CMD_SDRAM
 104 #define CONFIG_CMD_EEPROM
 105 #define CONFIG_CMD_NFS
 106 #define CONFIG_CMD_PCI
 107 #define CONFIG_CMD_SNTP
 108
 109
 110 #define CONFIG_DRAM_SPEED       100             /* MHz                          */
 111
 112 /*
 113  * Miscellaneous configurable options
 114  */
 115 #define CONFIG_SYS_LONGHELP             1               /* undef to save memory         */
 116 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt       */
 117 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size    */
 119 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 120 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 121 #define CONFIG_SYS_LOAD_ADDR            0x00100000      /* default load address         */
 122 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 123
 124 /*-----------------------------------------------------------------------
 125  * PCI stuff
 126  *-----------------------------------------------------------------------
 127  */
 128 #define CONFIG_PCI                              /* include pci support          */
 129 #undef CONFIG_PCI_PNP
 130
 131 #define CONFIG_NET_MULTI                        /* Multi ethernet cards support */
 132
 133 #define CONFIG_EEPRO100
 134 #define CONFIG_SYS_RX_ETH_BUFFER        8               /* use 8 rx buffer on eepro100  */
 135
 136 #define PCI_ENET0_IOADDR        0x80000000
 137 #define PCI_ENET0_MEMADDR       0x80000000
 138 #define PCI_ENET1_IOADDR        0x81000000
 139 #define PCI_ENET1_MEMADDR       0x81000000
 140
 141
 142 /*-----------------------------------------------------------------------
 143  * Start addresses for the final memory configuration
 144  * (Set up by the startup code)
 145  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 146  */
 147 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 148 #define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
 149
 150 #define CONFIG_SYS_RESET_ADDRESS        0xFFF00100
 151
 152 #if defined (USE_DINK32)
 153 #define CONFIG_SYS_MONITOR_LEN          0x00030000
 154 #define CONFIG_SYS_MONITOR_BASE 0x00090000
 155 #define CONFIG_SYS_RAMBOOT              1
 156 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 157 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 158 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 159 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 160 #else
 161 #undef  CONFIG_SYS_RAMBOOT
 162 #define CONFIG_SYS_MONITOR_LEN          0x00030000
 163 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 164
 165
 166 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
 167 #define CONFIG_SYS_INIT_RAM_SIZE      0x1000
 168 #define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 169
 170 #endif
 171
 172 #define CONFIG_SYS_FLASH_BASE           0xFFF00000
 173 #if 0
 174 #define CONFIG_SYS_FLASH_SIZE           (512 * 1024)    /* sandpoint has tiny eeprom    */
 175 #else
 176 #define CONFIG_SYS_FLASH_SIZE           (1024 * 1024)   /* Unity has onboard 1MByte flash */
 177 #endif
 178 #define CONFIG_ENV_IS_IN_FLASH  1
 179 #define CONFIG_ENV_OFFSET               0x00004000      /* Offset of Environment Sector */
 180 #define CONFIG_ENV_SIZE         0x00002000      /* Total Size of Environment Sector */
 181
 182 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)     /* Reserve 512 kB for malloc()  */
 183
 184 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on             */
 185 #define CONFIG_SYS_MEMTEST_END          0x04000000      /* 0 ... 32 MB in DRAM          */
 186
 187 #define CONFIG_SYS_EUMB_ADDR            0xFC000000
 188
 189 #define CONFIG_SYS_ISA_MEM              0xFD000000
 190 #define CONFIG_SYS_ISA_IO               0xFE000000
 191
 192 #define CONFIG_SYS_FLASH_RANGE_BASE     0xFF000000      /* flash memory address range   */
 193 #define CONFIG_SYS_FLASH_RANGE_SIZE     0x01000000
 194 #define FLASH_BASE0_PRELIM      0xFFF00000      /* sandpoint flash              */
 195 #define FLASH_BASE1_PRELIM      0xFF000000      /* PMC onboard flash            */
 196
 197 /*
 198  * select i2c support configuration
 199  *
 200  * Supported configurations are {none, software, hardware} drivers.
 201  * If the software driver is chosen, there are some additional
 202  * configuration items that the driver uses to drive the port pins.
 203  */
 204 #define CONFIG_HARD_I2C         1               /* To enable I2C support        */
 205 #undef  CONFIG_SOFT_I2C                         /* I2C bit-banged               */
 206 #define CONFIG_SYS_I2C_SPEED            400000          /* I2C speed and slave address  */
 207 #define CONFIG_SYS_I2C_SLAVE            0x7F
 208
 209 #ifdef CONFIG_SOFT_I2C
 210 #error "Soft I2C is not configured properly.  Please review!"
 211 #define I2C_PORT                3               /* Port A=0, B=1, C=2, D=3 */
 212 #define I2C_ACTIVE              (iop->pdir |=  0x00010000)
 213 #define I2C_TRISTATE            (iop->pdir &= ~0x00010000)
 214 #define I2C_READ                ((iop->pdat & 0x00010000) != 0)
 215 #define I2C_SDA(bit)            if(bit) iop->pdat |=  0x00010000; \
 216                                 else    iop->pdat &= ~0x00010000
 217 #define I2C_SCL(bit)            if(bit) iop->pdat |=  0x00020000; \
 218                                 else    iop->pdat &= ~0x00020000
 219 #define I2C_DELAY               udelay(5)       /* 1/4 I2C clock duration */
 220 #endif /* CONFIG_SOFT_I2C */
 221
 222
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57            /* EEPROM IS24C02               */
 224 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1               /* Bytes of address             */
 225 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3       /* write page size              */
 226 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* takes up to 10 msec          */
 227
 228
 229 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 230 #define CONFIG_SYS_FLASH_BANKS          { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
 231
 232 /*-----------------------------------------------------------------------
 233  * Definitions for initial stack pointer and data area (in DPRAM)
 234  */
 235
 236
 237 #define CONFIG_WINBOND_83C553   1       /*has a winbond bridge                  */
 238 #define CONFIG_SYS_USE_WINBOND_IDE      0       /*use winbond 83c553 internal IDE ctrlr */
 239 #define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800   /*pci-isa bridge config addr    */
 240 #define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900   /*ide config addr               */
 241
 242 #define CONFIG_SYS_IDE_MAXBUS           2   /* max. 2 IDE busses        */
 243 #define CONFIG_SYS_IDE_MAXDEVICE        (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 244
 245 /*
 246  * NS87308 Configuration
 247  */
 248 #define CONFIG_NS87308                  /* Nat Semi super-io controller on ISA bus */
 249
 250 #define CONFIG_SYS_NS87308_BADDR_10     1
 251
 252 #define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1   | \
 253                                   CONFIG_SYS_NS87308_UART2   | \
 254                                   CONFIG_SYS_NS87308_POWRMAN | \
 255                                   CONFIG_SYS_NS87308_RTC_APC )
 256
 257 #undef  CONFIG_SYS_NS87308_PS2MOD
 258
 259 #define CONFIG_SYS_NS87308_CS0_BASE     0x0076
 260 #define CONFIG_SYS_NS87308_CS0_CONF     0x30
 261 #define CONFIG_SYS_NS87308_CS1_BASE     0x0075
 262 #define CONFIG_SYS_NS87308_CS1_CONF     0x30
 263 #define CONFIG_SYS_NS87308_CS2_BASE     0x0074
 264 #define CONFIG_SYS_NS87308_CS2_CONF     0x30
 265
 266 /*
 267  * NS16550 Configuration
 268  */
 269 #define CONFIG_SYS_NS16550
 270 #define CONFIG_SYS_NS16550_SERIAL
 271
 272 #define CONFIG_SYS_NS16550_REG_SIZE     1
 273
 274 #define CONFIG_SYS_NS16550_CLK          1843200
 275
 276 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
 277 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
 278
 279 /*
 280  * Low Level Configuration Settings
 281  * (address mappings, register initial values, etc.)
 282  * You should know what you are doing if you make changes here.
 283  */
 284
 285 #define CONFIG_SYS_CLK_FREQ  33000000   /* external frequency to pll */
 286 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  1
 287
 288 #define CONFIG_SYS_ROMNAL               7       /*rom/flash next access time            */
 289 #define CONFIG_SYS_ROMFAL               11      /*rom/flash access time                 */
 290
 291 #define CONFIG_SYS_REFINT       430     /* no of clock cycles between CBR refresh cycles */
 292
 293 /* the following are for SDRAM only*/
 294 #define CONFIG_SYS_BSTOPRE      121     /* Burst To Precharge, sets open page interval */
 295 #define CONFIG_SYS_REFREC               8       /* Refresh to activate interval         */
 296 #define CONFIG_SYS_RDLAT                4       /* data latency from read command       */
 297 #define CONFIG_SYS_PRETOACT             3       /* Precharge to activate interval       */
 298 #define CONFIG_SYS_ACTTOPRE             5       /* Activate to Precharge interval       */
 299 #define CONFIG_SYS_ACTORW               3       /* Activate to R/W                      */
 300 #define CONFIG_SYS_SDMODE_CAS_LAT       3       /* SDMODE CAS latency                   */
 301 #define CONFIG_SYS_SDMODE_WRAP          0       /* SDMODE wrap type                     */
 302 #define CONFIG_SYS_SDMODE_BURSTLEN      2       /* SDMODE Burst length 2=4, 3=8         */
 303
 304 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
 305
 306 /* memory bank settings*/
 307 /*
 308  * only bits 20-29 are actually used from these vales to set the
 309  * start/end address the upper two bits will be 0, and the lower 20
 310  * bits will be set to 0x00000 for a start address, or 0xfffff for an
 311  * end address
 312  */
 313 #define CONFIG_SYS_BANK0_START          0x00000000
 314 #define CONFIG_SYS_BANK0_END            (CONFIG_SYS_MAX_RAM_SIZE - 1)
 315 #define CONFIG_SYS_BANK0_ENABLE 1
 316 #define CONFIG_SYS_BANK1_START          0x3ff00000
 317 #define CONFIG_SYS_BANK1_END            0x3fffffff
 318 #define CONFIG_SYS_BANK1_ENABLE 0
 319 #define CONFIG_SYS_BANK2_START          0x3ff00000
 320 #define CONFIG_SYS_BANK2_END            0x3fffffff
 321 #define CONFIG_SYS_BANK2_ENABLE 0
 322 #define CONFIG_SYS_BANK3_START          0x3ff00000
 323 #define CONFIG_SYS_BANK3_END            0x3fffffff
 324 #define CONFIG_SYS_BANK3_ENABLE 0
 325 #define CONFIG_SYS_BANK4_START          0x00000000
 326 #define CONFIG_SYS_BANK4_END            0x00000000
 327 #define CONFIG_SYS_BANK4_ENABLE 0
 328 #define CONFIG_SYS_BANK5_START          0x00000000
 329 #define CONFIG_SYS_BANK5_END            0x00000000
 330 #define CONFIG_SYS_BANK5_ENABLE 0
 331 #define CONFIG_SYS_BANK6_START          0x00000000
 332 #define CONFIG_SYS_BANK6_END            0x00000000
 333 #define CONFIG_SYS_BANK6_ENABLE 0
 334 #define CONFIG_SYS_BANK7_START          0x00000000
 335 #define CONFIG_SYS_BANK7_END            0x00000000
 336 #define CONFIG_SYS_BANK7_ENABLE 0
 337 /*
 338  * Memory bank enable bitmask, specifying which of the banks defined above
 339  are actually present. MSB is for bank #7, LSB is for bank #0.
 340  */
 341 #define CONFIG_SYS_BANK_ENABLE          0x01
 342
 343 #define CONFIG_SYS_ODCR         0xff    /* configures line driver impedances,   */
 344                                         /* see 8240 book for bit definitions    */
 345 #define CONFIG_SYS_PGMAX                0x32    /* how long the 8240 retains the        */
 346                                         /* currently accessed page in memory    */
 347                                         /* see 8240 book for details            */
 348
 349 /* SDRAM 0 - 256MB */
 350 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 351 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 352
 353 /* stack in DCACHE @ 1GB (no backing mem) */
 354 #if defined(USE_DINK32)
 355 #define CONFIG_SYS_IBAT1L       (0x40000000 | BATL_PP_00 )
 356 #define CONFIG_SYS_IBAT1U       (0x40000000 | BATU_BL_128K )
 357 #else
 358 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 359 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 360 #endif
 361
 362 /* PCI memory */
 363 #define CONFIG_SYS_IBAT2L       (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 364 #define CONFIG_SYS_IBAT2U       (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 365
 366 /* Flash, config addrs, etc */
 367 #define CONFIG_SYS_IBAT3L       (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 368 #define CONFIG_SYS_IBAT3U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 369
 370 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 371 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 372 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 373 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 374 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 375 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 376 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 377 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 378
 379 /*
 380  * For booting Linux, the board info and command line data
 381  * have to be in the first 8 MB of memory, since this is
 382  * the maximum mapped by the Linux kernel during initialization.
 383  */
 384 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 385 /*-----------------------------------------------------------------------
 386  * FLASH organization
 387  */
 388 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 389 #define CONFIG_SYS_MAX_FLASH_SECT       20      /* max number of sectors on one chip    */
 390
 391 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 392 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 393
 394 /*-----------------------------------------------------------------------
 395  * Cache Configuration
 396  */
 397 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC8240 CPU                      */
 398 #if defined(CONFIG_CMD_KGDB)
 399 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 400 #endif
 401
 402 /* values according to the manual */
 403
 404 #define CONFIG_DRAM_50MHZ       1
 405 #define CONFIG_SDRAM_50MHZ
 406
 407 #undef  NR_8259_INTS
 408 #define NR_8259_INTS            1
 409
 410
 411 #define CONFIG_DISK_SPINUP_TIME 1000000
 412
 413
 414 #endif  /* __CONFIG_H */