include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #include <asm/config_mpc85xx.h>
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16
  17 #ifndef CONFIG_SECURE_BOOT
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  19 #else
  20 #define CONFIG_SYS_FSL_PBL_PBI \
  21                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  22 #endif
  23
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SYS_TEXT_BASE            0x30001000
  27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  28 #define CONFIG_SPL_PAD_TO               0x40000
  29 #define CONFIG_SPL_MAX_SIZE             0x28000
  30 #ifdef CONFIG_SPL_BUILD
  31 #define CONFIG_SPL_SKIP_RELOCATE
  32 #define CONFIG_SPL_COMMON_INIT_DDR
  33 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  34 #endif
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37
  38 #ifdef CONFIG_NAND
  39 #ifdef CONFIG_SECURE_BOOT
  40 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  41 /*
  42  * HDR would be appended at end of image and copied to DDR along
  43  * with U-Boot image.
  44  */
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  46                                          CONFIG_U_BOOT_HDR_SIZE)
  47 #else
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #endif
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  54 #ifdef CONFIG_TARGET_T1040RDB
  55 #define CONFIG_SYS_FSL_PBL_RCW \
  56 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  57 #endif
  58 #ifdef CONFIG_TARGET_T1042RDB_PI
  59 #define CONFIG_SYS_FSL_PBL_RCW \
  60 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  61 #endif
  62 #ifdef CONFIG_TARGET_T1042RDB
  63 #define CONFIG_SYS_FSL_PBL_RCW \
  64 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  65 #endif
  66 #ifdef CONFIG_TARGET_T1040D4RDB
  67 #define CONFIG_SYS_FSL_PBL_RCW \
  68 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  69 #endif
  70 #ifdef CONFIG_TARGET_T1042D4RDB
  71 #define CONFIG_SYS_FSL_PBL_RCW \
  72 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  73 #endif
  74 #define CONFIG_SPL_NAND_BOOT
  75 #endif
  76
  77 #ifdef CONFIG_SPIFLASH
  78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  79 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  84 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  85 #ifndef CONFIG_SPL_BUILD
  86 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  87 #endif
  88 #ifdef CONFIG_TARGET_T1040RDB
  89 #define CONFIG_SYS_FSL_PBL_RCW \
  90 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  91 #endif
  92 #ifdef CONFIG_TARGET_T1042RDB_PI
  93 #define CONFIG_SYS_FSL_PBL_RCW \
  94 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  95 #endif
  96 #ifdef CONFIG_TARGET_T1042RDB
  97 #define CONFIG_SYS_FSL_PBL_RCW \
  98 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  99 #endif
 100 #ifdef CONFIG_TARGET_T1040D4RDB
 101 #define CONFIG_SYS_FSL_PBL_RCW \
 102 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 103 #endif
 104 #ifdef CONFIG_TARGET_T1042D4RDB
 105 #define CONFIG_SYS_FSL_PBL_RCW \
 106 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 107 #endif
 108 #define CONFIG_SPL_SPI_BOOT
 109 #endif
 110
 111 #ifdef CONFIG_SDCARD
 112 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 113 #define CONFIG_SPL_MMC_MINIMAL
 114 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 115 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 116 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 117 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 118 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 119 #ifndef CONFIG_SPL_BUILD
 120 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 121 #endif
 122 #ifdef CONFIG_TARGET_T1040RDB
 123 #define CONFIG_SYS_FSL_PBL_RCW \
 124 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 125 #endif
 126 #ifdef CONFIG_TARGET_T1042RDB_PI
 127 #define CONFIG_SYS_FSL_PBL_RCW \
 128 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 129 #endif
 130 #ifdef CONFIG_TARGET_T1042RDB
 131 #define CONFIG_SYS_FSL_PBL_RCW \
 132 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 133 #endif
 134 #ifdef CONFIG_TARGET_T1040D4RDB
 135 #define CONFIG_SYS_FSL_PBL_RCW \
 136 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 137 #endif
 138 #ifdef CONFIG_TARGET_T1042D4RDB
 139 #define CONFIG_SYS_FSL_PBL_RCW \
 140 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 141 #endif
 142 #define CONFIG_SPL_MMC_BOOT
 143 #endif
 144
 145 #endif
 146
 147 /* High Level Configuration Options */
 148 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 149 #define CONFIG_MP                       /* support multiple processors */
 150
 151 /* support deep sleep */
 152 #define CONFIG_DEEP_SLEEP
 153
 154 #ifndef CONFIG_SYS_TEXT_BASE
 155 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 156 #endif
 157
 158 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 159 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 160 #endif
 161
 162 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 163 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 164 #define CONFIG_PCI_INDIRECT_BRIDGE
 165 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 166 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 167 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 168 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 169
 170 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 171 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 172
 173 #define CONFIG_ENV_OVERWRITE
 174
 175 #ifdef CONFIG_MTD_NOR_FLASH
 176 #define CONFIG_FLASH_CFI_DRIVER
 177 #define CONFIG_SYS_FLASH_CFI
 178 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 179 #endif
 180
 181 #if defined(CONFIG_SPIFLASH)
 182 #define CONFIG_SYS_EXTRA_ENV_RELOC
 183 #define CONFIG_ENV_IS_IN_SPI_FLASH
 184 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 185 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 186 #define CONFIG_ENV_SECT_SIZE            0x10000
 187 #elif defined(CONFIG_SDCARD)
 188 #define CONFIG_SYS_EXTRA_ENV_RELOC
 189 #define CONFIG_SYS_MMC_ENV_DEV          0
 190 #define CONFIG_ENV_SIZE                 0x2000
 191 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 192 #elif defined(CONFIG_NAND)
 193 #ifdef CONFIG_SECURE_BOOT
 194 #define CONFIG_RAMBOOT_NAND
 195 #define CONFIG_BOOTSCRIPT_COPY_RAM
 196 #endif
 197 #define CONFIG_SYS_EXTRA_ENV_RELOC
 198 #define CONFIG_ENV_SIZE                 0x2000
 199 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 200 #else
 201 #define CONFIG_ENV_IS_IN_FLASH
 202 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 203 #define CONFIG_ENV_SIZE         0x2000
 204 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 205 #endif
 206
 207 #define CONFIG_SYS_CLK_FREQ     100000000
 208 #define CONFIG_DDR_CLK_FREQ     66666666
 209
 210 /*
 211  * These can be toggled for performance analysis, otherwise use default.
 212  */
 213 #define CONFIG_SYS_CACHE_STASHING
 214 #define CONFIG_BACKSIDE_L2_CACHE
 215 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 216 #define CONFIG_BTB                      /* toggle branch predition */
 217 #define CONFIG_DDR_ECC
 218 #ifdef CONFIG_DDR_ECC
 219 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 220 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 221 #endif
 222
 223 #define CONFIG_ENABLE_36BIT_PHYS
 224
 225 #define CONFIG_ADDR_MAP
 226 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 227
 228 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 229 #define CONFIG_SYS_MEMTEST_END          0x00400000
 230 #define CONFIG_SYS_ALT_MEMTEST
 231 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 232
 233 /*
 234  *  Config the L3 Cache as L3 SRAM
 235  */
 236 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 237 /*
 238  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 239  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 240  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 241  */
 242 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 243 #define CONFIG_SYS_L3_SIZE              256 << 10
 244 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 245 #ifdef CONFIG_RAMBOOT_PBL
 246 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 247 #endif
 248 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 249 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 250 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 251 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 252
 253 #define CONFIG_SYS_DCSRBAR              0xf0000000
 254 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 255
 256 /*
 257  * DDR Setup
 258  */
 259 #define CONFIG_VERY_BIG_RAM
 260 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 261 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 262
 263 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 264 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 265
 266 #define CONFIG_DDR_SPD
 267
 268 #define CONFIG_SYS_SPD_BUS_NUM  0
 269 #define SPD_EEPROM_ADDRESS      0x51
 270
 271 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 272
 273 /*
 274  * IFC Definitions
 275  */
 276 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 277 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 278
 279 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 280 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 281                                 CSPR_PORT_SIZE_16 | \
 282                                 CSPR_MSEL_NOR | \
 283                                 CSPR_V)
 284 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 285
 286 /*
 287  * TDM Definition
 288  */
 289 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 290
 291 /* NOR Flash Timing Params */
 292 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 293 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 294                                 FTIM0_NOR_TEADC(0x5) | \
 295                                 FTIM0_NOR_TEAHC(0x5))
 296 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 297                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 298                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 299 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 300                                 FTIM2_NOR_TCH(0x4) | \
 301                                 FTIM2_NOR_TWPH(0x0E) | \
 302                                 FTIM2_NOR_TWP(0x1c))
 303 #define CONFIG_SYS_NOR_FTIM3    0x0
 304
 305 #define CONFIG_SYS_FLASH_QUIET_TEST
 306 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 307
 308 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 309 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 310 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 311 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 312
 313 #define CONFIG_SYS_FLASH_EMPTY_INFO
 314 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 315
 316 /* CPLD on IFC */
 317 #define CPLD_LBMAP_MASK                 0x3F
 318 #define CPLD_BANK_SEL_MASK              0x07
 319 #define CPLD_BANK_OVERRIDE              0x40
 320 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 321 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 322 #define CPLD_LBMAP_RESET                0xFF
 323 #define CPLD_LBMAP_SHIFT                0x03
 324
 325 #if defined(CONFIG_TARGET_T1042RDB_PI)
 326 #define CPLD_DIU_SEL_DFP                0x80
 327 #elif defined(CONFIG_TARGET_T1042D4RDB)
 328 #define CPLD_DIU_SEL_DFP                0xc0
 329 #endif
 330
 331 #if defined(CONFIG_TARGET_T1040D4RDB)
 332 #define CPLD_INT_MASK_ALL               0xFF
 333 #define CPLD_INT_MASK_THERM             0x80
 334 #define CPLD_INT_MASK_DVI_DFP           0x40
 335 #define CPLD_INT_MASK_QSGMII1           0x20
 336 #define CPLD_INT_MASK_QSGMII2           0x10
 337 #define CPLD_INT_MASK_SGMI1             0x08
 338 #define CPLD_INT_MASK_SGMI2             0x04
 339 #define CPLD_INT_MASK_TDMR1             0x02
 340 #define CPLD_INT_MASK_TDMR2             0x01
 341 #endif
 342
 343 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 344 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 345 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 346 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 347                                 | CSPR_PORT_SIZE_8 \
 348                                 | CSPR_MSEL_GPCM \
 349                                 | CSPR_V)
 350 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 351 #define CONFIG_SYS_CSOR2        0x0
 352 /* CPLD Timing parameters for IFC CS2 */
 353 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 354                                         FTIM0_GPCM_TEADC(0x0e) | \
 355                                         FTIM0_GPCM_TEAHC(0x0e))
 356 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 357                                         FTIM1_GPCM_TRAD(0x1f))
 358 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 359                                         FTIM2_GPCM_TCH(0x8) | \
 360                                         FTIM2_GPCM_TWP(0x1f))
 361 #define CONFIG_SYS_CS2_FTIM3            0x0
 362
 363 /* NAND Flash on IFC */
 364 #define CONFIG_NAND_FSL_IFC
 365 #define CONFIG_SYS_NAND_BASE            0xff800000
 366 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 367
 368 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 369 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 370                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 371                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 372                                 | CSPR_V)
 373 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 374
 375 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 376                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 377                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 378                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 379                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 380                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 381                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 382
 383 #define CONFIG_SYS_NAND_ONFI_DETECTION
 384
 385 /* ONFI NAND Flash mode0 Timing Params */
 386 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 387                                         FTIM0_NAND_TWP(0x18)   | \
 388                                         FTIM0_NAND_TWCHT(0x07) | \
 389                                         FTIM0_NAND_TWH(0x0a))
 390 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 391                                         FTIM1_NAND_TWBE(0x39)  | \
 392                                         FTIM1_NAND_TRR(0x0e)   | \
 393                                         FTIM1_NAND_TRP(0x18))
 394 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 395                                         FTIM2_NAND_TREH(0x0a) | \
 396                                         FTIM2_NAND_TWHRE(0x1e))
 397 #define CONFIG_SYS_NAND_FTIM3           0x0
 398
 399 #define CONFIG_SYS_NAND_DDR_LAW         11
 400 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 401 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 402 #define CONFIG_CMD_NAND
 403
 404 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 405
 406 #if defined(CONFIG_NAND)
 407 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 408 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 409 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 410 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 411 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 412 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 413 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 414 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 415 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 416 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 417 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 418 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 419 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 420 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 421 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 422 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 423 #else
 424 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 425 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 426 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 427 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 428 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 429 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 430 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 431 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 432 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 433 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 434 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 435 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 436 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 437 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 438 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 439 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 440 #endif
 441
 442 #ifdef CONFIG_SPL_BUILD
 443 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 444 #else
 445 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 446 #endif
 447
 448 #if defined(CONFIG_RAMBOOT_PBL)
 449 #define CONFIG_SYS_RAMBOOT
 450 #endif
 451
 452 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 453 #if defined(CONFIG_NAND)
 454 #define CONFIG_A008044_WORKAROUND
 455 #endif
 456 #endif
 457
 458 #define CONFIG_BOARD_EARLY_INIT_R
 459 #define CONFIG_MISC_INIT_R
 460
 461 #define CONFIG_HWCONFIG
 462
 463 /* define to use L1 as initial stack */
 464 #define CONFIG_L1_INIT_RAM
 465 #define CONFIG_SYS_INIT_RAM_LOCK
 466 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 467 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 468 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 469 /* The assembler doesn't like typecast */
 470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 471         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 472           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 473 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 474
 475 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 476                                         GENERATED_GBL_DATA_SIZE)
 477 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 478
 479 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 480 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 481
 482 /* Serial Port - controlled on board with jumper J8
 483  * open - index 2
 484  * shorted - index 1
 485  */
 486 #define CONFIG_CONS_INDEX       1
 487 #define CONFIG_SYS_NS16550_SERIAL
 488 #define CONFIG_SYS_NS16550_REG_SIZE     1
 489 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 490
 491 #define CONFIG_SYS_BAUDRATE_TABLE       \
 492         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 493
 494 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 495 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 496 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 497 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 498
 499 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 500 /* Video */
 501 #define CONFIG_FSL_DIU_FB
 502
 503 #ifdef CONFIG_FSL_DIU_FB
 504 #define CONFIG_FSL_DIU_CH7301
 505 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 506 #define CONFIG_VIDEO_LOGO
 507 #define CONFIG_VIDEO_BMP_LOGO
 508 #endif
 509 #endif
 510
 511 /* I2C */
 512 #define CONFIG_SYS_I2C
 513 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 514 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 515 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 516 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 517 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 518 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 519 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 520 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 521 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 522 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 523 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 524 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 525 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 526
 527 /* I2C bus multiplexer */
 528 #define I2C_MUX_PCA_ADDR                0x70
 529 #define I2C_MUX_CH_DEFAULT      0x8
 530
 531 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 532         defined(CONFIG_TARGET_T1040D4RDB)       || \
 533         defined(CONFIG_TARGET_T1042D4RDB)
 534 /* LDI/DVI Encoder for display */
 535 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 536 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 537
 538 /*
 539  * RTC configuration
 540  */
 541 #define RTC
 542 #define CONFIG_RTC_DS1337               1
 543 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 544
 545 /*DVI encoder*/
 546 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 547 #endif
 548
 549 /*
 550  * eSPI - Enhanced SPI
 551  */
 552 #define CONFIG_SPI_FLASH_BAR
 553 #define CONFIG_SF_DEFAULT_SPEED         10000000
 554 #define CONFIG_SF_DEFAULT_MODE          0
 555 #define CONFIG_ENV_SPI_BUS              0
 556 #define CONFIG_ENV_SPI_CS               0
 557 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 558 #define CONFIG_ENV_SPI_MODE             0
 559
 560 /*
 561  * General PCI
 562  * Memory space is mapped 1-1, but I/O space must start from 0.
 563  */
 564
 565 #ifdef CONFIG_PCI
 566 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 567 #ifdef CONFIG_PCIE1
 568 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 569 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 570 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 571 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 572 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 573 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 574 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 575 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 576 #endif
 577
 578 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 579 #ifdef CONFIG_PCIE2
 580 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 581 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 582 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 583 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 584 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 585 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 586 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 587 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 588 #endif
 589
 590 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 591 #ifdef CONFIG_PCIE3
 592 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 593 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 594 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 595 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 596 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 597 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 598 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 599 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 600 #endif
 601
 602 /* controller 4, Base address 203000 */
 603 #ifdef CONFIG_PCIE4
 604 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 605 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 606 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 607 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 608 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 609 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 610 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 611 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 612 #endif
 613
 614 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 615 #endif  /* CONFIG_PCI */
 616
 617 /* SATA */
 618 #define CONFIG_FSL_SATA_V2
 619 #ifdef CONFIG_FSL_SATA_V2
 620 #define CONFIG_LIBATA
 621 #define CONFIG_FSL_SATA
 622
 623 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 624 #define CONFIG_SATA1
 625 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 626 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 627
 628 #define CONFIG_LBA48
 629 #endif
 630
 631 /*
 632 * USB
 633 */
 634 #define CONFIG_HAS_FSL_DR_USB
 635
 636 #ifdef CONFIG_HAS_FSL_DR_USB
 637 #ifdef CONFIG_USB_EHCI_HCD
 638 #define CONFIG_USB_EHCI_FSL
 639 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 640 #endif
 641 #endif
 642
 643 #ifdef CONFIG_MMC
 644 #define CONFIG_FSL_ESDHC
 645 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 646 #endif
 647
 648 /* Qman/Bman */
 649 #ifndef CONFIG_NOBQFMAN
 650 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 651 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 652 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 653 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 654 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 655 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 656 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 657 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 658 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 659 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 660                                         CONFIG_SYS_BMAN_CENA_SIZE)
 661 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 662 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 663 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 664 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 665 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 666 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 667 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 668 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 669 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 670 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 671 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 672                                         CONFIG_SYS_QMAN_CENA_SIZE)
 673 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 674 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 675
 676 #define CONFIG_SYS_DPAA_FMAN
 677 #define CONFIG_SYS_DPAA_PME
 678
 679 #define CONFIG_QE
 680 #define CONFIG_U_QE
 681
 682 /* Default address of microcode for the Linux Fman driver */
 683 #if defined(CONFIG_SPIFLASH)
 684 /*
 685  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 686  * env, so we got 0x110000.
 687  */
 688 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 689 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 690 #elif defined(CONFIG_SDCARD)
 691 /*
 692  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 693  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 694  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 695  */
 696 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 697 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 698 #elif defined(CONFIG_NAND)
 699 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 700 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 701 #else
 702 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 703 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 704 #endif
 705
 706 #if defined(CONFIG_SPIFLASH)
 707 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 708 #elif defined(CONFIG_SDCARD)
 709 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 710 #elif defined(CONFIG_NAND)
 711 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 712 #else
 713 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 714 #endif
 715
 716 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 717 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 718 #endif /* CONFIG_NOBQFMAN */
 719
 720 #ifdef CONFIG_SYS_DPAA_FMAN
 721 #define CONFIG_FMAN_ENET
 722 #define CONFIG_PHY_VITESSE
 723 #define CONFIG_PHY_REALTEK
 724 #endif
 725
 726 #ifdef CONFIG_FMAN_ENET
 727 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 728 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 729 #elif defined(CONFIG_TARGET_T1040D4RDB)
 730 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 731 #elif defined(CONFIG_TARGET_T1042D4RDB)
 732 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 733 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 734 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 735 #endif
 736
 737 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 738 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 739 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 740 #else
 741 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 742 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 743 #endif
 744
 745 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 746 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 747 #define CONFIG_VSC9953
 748 #ifdef CONFIG_TARGET_T1040RDB
 749 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 750 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 751 #else
 752 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 753 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 754 #endif
 755 #endif
 756
 757 #define CONFIG_MII              /* MII PHY management */
 758 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 759 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 760 #endif
 761
 762 /*
 763  * Environment
 764  */
 765 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 766 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 767
 768 /*
 769  * Command line configuration.
 770  */
 771 #define CONFIG_CMD_REGINFO
 772
 773 #ifdef CONFIG_PCI
 774 #define CONFIG_CMD_PCI
 775 #endif
 776
 777 /*
 778  * Miscellaneous configurable options
 779  */
 780 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 781 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 782 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 783 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 784 #ifdef CONFIG_CMD_KGDB
 785 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 786 #else
 787 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 788 #endif
 789 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 790 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 791 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 792
 793 /*
 794  * For booting Linux, the board info and command line data
 795  * have to be in the first 64 MB of memory, since this is
 796  * the maximum mapped by the Linux kernel during initialization.
 797  */
 798 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 799 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 800
 801 #ifdef CONFIG_CMD_KGDB
 802 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 803 #endif
 804
 805 /*
 806  * Dynamic MTD Partition support with mtdparts
 807  */
 808 #ifdef CONFIG_MTD_NOR_FLASH
 809 #define CONFIG_MTD_DEVICE
 810 #define CONFIG_MTD_PARTITIONS
 811 #define CONFIG_FLASH_CFI_MTD
 812 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 813                         "spi0=spife110000.0"
 814 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 815                                 "128k(dtb),96m(fs),-(user);"\
 816                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 817                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 818                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 819 #endif
 820
 821 /*
 822  * Environment Configuration
 823  */
 824 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 825 #define CONFIG_BOOTFILE         "uImage"
 826 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 827
 828 /* default location for tftp and bootm */
 829 #define CONFIG_LOADADDR         1000000
 830
 831 #define __USB_PHY_TYPE  utmi
 832 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 833
 834 #ifdef CONFIG_TARGET_T1040RDB
 835 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 836 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 837 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 838 #elif defined(CONFIG_TARGET_T1042RDB)
 839 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 840 #elif defined(CONFIG_TARGET_T1040D4RDB)
 841 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 842 #elif defined(CONFIG_TARGET_T1042D4RDB)
 843 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 844 #endif
 845
 846 #ifdef CONFIG_FSL_DIU_FB
 847 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 848 #else
 849 #define DIU_ENVIRONMENT
 850 #endif
 851
 852 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 853         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 854         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 855         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 856         "netdev=eth0\0"                                         \
 857         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 858         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 859         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 860         "tftpflash=tftpboot $loadaddr $uboot && "               \
 861         "protect off $ubootaddr +$filesize && "                 \
 862         "erase $ubootaddr +$filesize && "                       \
 863         "cp.b $loadaddr $ubootaddr $filesize && "               \
 864         "protect on $ubootaddr +$filesize && "                  \
 865         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 866         "consoledev=ttyS0\0"                                    \
 867         "ramdiskaddr=2000000\0"                                 \
 868         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 869         "fdtaddr=1e00000\0"                                     \
 870         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 871         "bdev=sda3\0"
 872
 873 #define CONFIG_LINUX                       \
 874         "setenv bootargs root=/dev/ram rw "            \
 875         "console=$consoledev,$baudrate $othbootargs;"  \
 876         "setenv ramdiskaddr 0x02000000;"               \
 877         "setenv fdtaddr 0x00c00000;"                   \
 878         "setenv loadaddr 0x1000000;"                   \
 879         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 880
 881 #define CONFIG_HDBOOT                                   \
 882         "setenv bootargs root=/dev/$bdev rw "           \
 883         "console=$consoledev,$baudrate $othbootargs;"   \
 884         "tftp $loadaddr $bootfile;"                     \
 885         "tftp $fdtaddr $fdtfile;"                       \
 886         "bootm $loadaddr - $fdtaddr"
 887
 888 #define CONFIG_NFSBOOTCOMMAND                   \
 889         "setenv bootargs root=/dev/nfs rw "     \
 890         "nfsroot=$serverip:$rootpath "          \
 891         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 892         "console=$consoledev,$baudrate $othbootargs;"   \
 893         "tftp $loadaddr $bootfile;"             \
 894         "tftp $fdtaddr $fdtfile;"               \
 895         "bootm $loadaddr - $fdtaddr"
 896
 897 #define CONFIG_RAMBOOTCOMMAND                           \
 898         "setenv bootargs root=/dev/ram rw "             \
 899         "console=$consoledev,$baudrate $othbootargs;"   \
 900         "tftp $ramdiskaddr $ramdiskfile;"               \
 901         "tftp $loadaddr $bootfile;"                     \
 902         "tftp $fdtaddr $fdtfile;"                       \
 903         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 904
 905 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 906
 907 #include <asm/fsl_secure_boot.h>
 908
 909 #endif  /* __CONFIG_H */