include/configs/actux1.h

   1 /*
   2  * (C) Copyright 2007
   3  * Michael Schwingen, michael@schwingen.org
   4  *
   5  * Configuration settings for the AcTux-1 board.
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #define CONFIG_IXP425                   1
  30 #define CONFIG_ACTUX1                   1
  31
  32 #define CONFIG_MACH_TYPE                1479
  33
  34 #define CONFIG_DISPLAY_CPUINFO          1
  35 #define CONFIG_DISPLAY_BOARDINFO        1
  36
  37 #define CONFIG_IXP_SERIAL
  38 #define CONFIG_SYS_IXP425_CONSOLE               IXP425_UART2
  39 #define CONFIG_BAUDRATE                 115200
  40 #define CONFIG_BOOTDELAY                3
  41 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
  42 #define CONFIG_BOARD_EARLY_INIT_F       1
  43 #define CONFIG_SYS_LDSCRIPT     "board/actux1/u-boot.lds"
  44
  45 /***************************************************************
  46  * U-boot generic defines start here.
  47  ***************************************************************/
  48 /*
  49  * Size of malloc() pool
  50  */
  51 #define CONFIG_SYS_MALLOC_LEN                   (CONFIG_ENV_SIZE + 128*1024)
  52
  53 /* allow to overwrite serial and ethaddr */
  54 #define CONFIG_ENV_OVERWRITE
  55
  56 /* Command line configuration. */
  57 #include <config_cmd_default.h>
  58
  59 #define CONFIG_CMD_ELF
  60 #ifdef CONFIG_PCI
  61 #define CONFIG_CMD_PCI
  62 #define CONFIG_PCI_PNP
  63 #define CONFIG_IXP_PCI
  64 #define CONFIG_PCI_SCAN_SHOW
  65 #define CONFIG_CMD_PCI_ENUM
  66 #endif
  67
  68 #define CONFIG_BOOTCOMMAND              "run boot_flash"
  69 /* enable passing of ATAGs */
  70 #define CONFIG_CMDLINE_TAG              1
  71 #define CONFIG_SETUP_MEMORY_TAGS        1
  72 #define CONFIG_INITRD_TAG               1
  73 #define CONFIG_REVISION_TAG             1
  74
  75 #if defined(CONFIG_CMD_KGDB)
  76 # define CONFIG_KGDB_BAUDRATE           230400
  77 /* which serial port to use */
  78 # define CONFIG_KGDB_SER_INDEX          1
  79 #endif
  80
  81 /* Miscellaneous configurable options */
  82 #define CONFIG_SYS_LONGHELP
  83 #define CONFIG_SYS_PROMPT                       "=> "
  84 /* Console I/O Buffer Size */
  85 #define CONFIG_SYS_CBSIZE                       256
  86 /* Print Buffer Size */
  87 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  88 /* max number of command args */
  89 #define CONFIG_SYS_MAXARGS                      16
  90 /* Boot Argument Buffer Size */
  91 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
  92
  93 #define CONFIG_SYS_MEMTEST_START                0x00400000
  94 #define CONFIG_SYS_MEMTEST_END                  0x00800000
  95
  96 /* timer clock - 2* OSC_IN system clock */
  97 #define CONFIG_IXP425_TIMER_CLK                 66666666
  98 #define CONFIG_SYS_HZ                           1000
  99
 100 /* default load address */
 101 #define CONFIG_SYS_LOAD_ADDR                    0x00010000
 102
 103 /* valid baudrates */
 104 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, 57600,    \
 105                                           115200, 230400 }
 106 #define CONFIG_SERIAL_RTS_ACTIVE        1
 107
 108 /* Expansion bus settings */
 109 #define CONFIG_SYS_EXP_CS0                      0xbd113842
 110
 111 /* SDRAM settings */
 112 #define CONFIG_NR_DRAM_BANKS            1
 113 #define PHYS_SDRAM_1                    0x00000000
 114 #define CONFIG_SYS_SDRAM_BASE                   0x00000000
 115
 116 #ifdef CONFIG_RAM_32MB
 117 # define CONFIG_SYS_SDR_CONFIG                  0x18
 118 # define PHYS_SDRAM_1_SIZE              0x02000000
 119 # define CONFIG_SYS_SDRAM_REFRESH_CNT           0x81a
 120 # define CONFIG_SYS_SDR_MODE_CONFIG             0x1
 121 # define CONFIG_SYS_DRAM_SIZE                   0x02000000
 122 #else /* 16MB SDRAM */
 123 # define CONFIG_SYS_SDR_CONFIG                  0x3A
 124 # define PHYS_SDRAM_1_SIZE              0x01000000
 125 # define CONFIG_SYS_SDRAM_REFRESH_CNT           0x81a
 126 # define CONFIG_SYS_SDR_MODE_CONFIG             0x1
 127 # define CONFIG_SYS_DRAM_SIZE                   0x01000000
 128 #endif
 129
 130 /* FLASH organization */
 131 #define CONFIG_SYS_TEXT_BASE            0x50000000
 132 #ifdef CONFIG_FLASH2X2
 133 # define CONFIG_SYS_MAX_FLASH_BANKS             2
 134 /* max number of sectors on one chip */
 135 # define CONFIG_SYS_MAX_FLASH_SECT              40
 136 # define PHYS_FLASH_1                   0x50000000
 137 # define PHYS_FLASH_2                   0x50200000
 138 # define CONFIG_SYS_FLASH_BANKS_LIST            { PHYS_FLASH_1, PHYS_FLASH_2 }
 139 #endif
 140 #ifdef CONFIG_FLASH1X8
 141 # define CONFIG_SYS_MAX_FLASH_BANKS             1
 142 /* max number of sectors on one chip */
 143 # define CONFIG_SYS_MAX_FLASH_SECT              140
 144 # define PHYS_FLASH_1                   0x50000000
 145 # define CONFIG_SYS_FLASH_BANKS_LIST            { PHYS_FLASH_1 }
 146 #endif
 147
 148 #define CONFIG_SYS_FLASH_BASE                   PHYS_FLASH_1
 149 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 150 #define CONFIG_SYS_MONITOR_LEN                  (256 << 10)
 151 #define CONFIG_BOARD_SIZE_LIMIT                 262144
 152
 153 /* Use common CFI driver */
 154 #define CONFIG_SYS_FLASH_CFI
 155 #define CONFIG_FLASH_CFI_DRIVER
 156 /* no byte writes on IXP4xx */
 157 #define CONFIG_SYS_FLASH_CFI_WIDTH              FLASH_CFI_16BIT
 158 /* print 'E' for empty sector on flinfo */
 159 #define CONFIG_SYS_FLASH_EMPTY_INFO
 160
 161 /* Ethernet */
 162
 163 /* include IXP4xx NPE support */
 164 #define CONFIG_IXP4XX_NPE               1
 165 /* NPE0 PHY address */
 166 #define CONFIG_PHY_ADDR                 0
 167 /* NPE1 PHY address (HW Release E only) */
 168 #define CONFIG_PHY1_ADDR                1
 169 /* MII PHY management */
 170 #define CONFIG_MII                      1
 171 /* Number of ethernet rx buffers & descriptors */
 172 #define CONFIG_SYS_RX_ETH_BUFFER                16
 173 #define CONFIG_RESET_PHY_R              1
 174
 175 #define CONFIG_HAS_ETH1                 1
 176
 177 #define CONFIG_CMD_DHCP
 178 #define CONFIG_CMD_NET
 179 #define CONFIG_CMD_MII
 180 #define CONFIG_CMD_PING
 181 #undef  CONFIG_CMD_NFS
 182
 183 /* BOOTP options */
 184 #define CONFIG_BOOTP_BOOTFILESIZE
 185 #define CONFIG_BOOTP_BOOTPATH
 186 #define CONFIG_BOOTP_GATEWAY
 187 #define CONFIG_BOOTP_HOSTNAME
 188
 189 /* Cache Configuration */
 190 #define CONFIG_SYS_CACHELINE_SIZE               32
 191
 192 /*
 193  * environment organization:
 194  * one flash sector, embedded in uboot area (bottom bootblock flash)
 195  */
 196 #define CONFIG_ENV_IS_IN_FLASH          1
 197 #define CONFIG_ENV_SIZE                 0x2000
 198 #define CONFIG_ENV_ADDR                 (PHYS_FLASH_1 + 0x4000)
 199 #define CONFIG_SYS_USE_PPCENV                   1
 200
 201 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 202         "npe_ucode=50040000\0"                                          \
 203         "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
 204         "kerneladdr=50050000\0"                                         \
 205         "kernelfile=actux1/uImage\0"                                    \
 206         "rootfile=actux1/rootfs\0"                                      \
 207         "rootaddr=50170000\0"                                           \
 208         "loadaddr=10000\0"                                              \
 209         "updateboot_ser=mw.b 10000 ff 40000;"                           \
 210         " loady ${loadaddr};"                                           \
 211         " run eraseboot writeboot\0"                                    \
 212         "updateboot_net=mw.b 10000 ff 40000;"                           \
 213         " tftp ${loadaddr} actux1/u-boot.bin;"                          \
 214         " run eraseboot writeboot\0"                                    \
 215         "eraseboot=protect off 50000000 50003fff;"                      \
 216         " protect off 50006000 5003ffff;"                               \
 217         " erase 50000000 50003fff;"                                     \
 218         " erase 50006000 5003ffff\0"                                    \
 219         "writeboot=cp.b 10000 50000000 4000;"                           \
 220         " cp.b 16000 50006000 3a000\0"                                  \
 221         "updateucode=loady;"                                            \
 222         " era ${npe_ucode} +${filesize};"                               \
 223         " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"                  \
 224         "updateroot=tftp ${loadaddr} ${rootfile};"                      \
 225         " era ${rootaddr} +${filesize};"                                \
 226         " cp.b ${loadaddr} ${rootaddr} ${filesize}\0"                   \
 227         "updatekern=tftp ${loadaddr} ${kernelfile};"                    \
 228         " era ${kerneladdr} +${filesize};"                              \
 229         " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"                 \
 230         "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
 231         " rootfstype=squashfs,jffs2 init=/etc/preinit\0"                \
 232         "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"   \
 233         " rootfstype=squashfs,jffs2 init=/etc/preinit\0"                \
 234         "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
 235         "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"       \
 236         "boot_flash=run flashargs addtty addeth;"                       \
 237         " bootm ${kerneladdr}\0"                                        \
 238         "boot_net=run netargs addtty addeth;"                           \
 239         " tftpboot ${loadaddr} ${kernelfile};"                          \
 240         " bootm\0"
 241
 242 /* additions for new relocation code, must be added to all boards */
 243 #define CONFIG_SYS_INIT_SP_ADDR                                         \
 244         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 245
 246 #endif /* __CONFIG_H */