include/configs/adp-ae3xx.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch-ae3xx/ae3xx.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_USE_INTERRUPT
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
  22
  23 #define CONFIG_CMDLINE_EDITING
  24 #define CONFIG_PANIC_HANG
  25
  26 #define CONFIG_SYS_ICACHE_OFF
  27 #define CONFIG_SYS_DCACHE_OFF
  28
  29 #define CONFIG_BOOTP_SEND_HOSTNAME
  30 #define CONFIG_BOOTP_SERVERIP
  31
  32 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  33 #define CONFIG_SYS_TEXT_BASE    0x00500000
  34 #ifdef CONFIG_OF_CONTROL
  35 #undef CONFIG_OF_SEPARATE
  36 #define CONFIG_OF_EMBED
  37 #endif
  38 #else
  39
  40 #define CONFIG_SYS_TEXT_BASE    0x80000000
  41 #endif
  42
  43 /*
  44  * Timer
  45  */
  46 #define CONFIG_SYS_CLK_FREQ     39062500
  47 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  48
  49 /*
  50  * Use Externel CLOCK or PCLK
  51  */
  52 #undef CONFIG_FTRTC010_EXTCLK
  53
  54 #ifndef CONFIG_FTRTC010_EXTCLK
  55 #define CONFIG_FTRTC010_PCLK
  56 #endif
  57
  58 #ifdef CONFIG_FTRTC010_EXTCLK
  59 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  60 #else
  61 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  62 #endif
  63
  64 #define TIMER_LOAD_VAL  0xffffffff
  65
  66 /*
  67  * Real Time Clock
  68  */
  69 #define CONFIG_RTC_FTRTC010
  70
  71 /*
  72  * Real Time Clock Divider
  73  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  74  */
  75 #define OSC_5MHZ                        (5*1000000)
  76 #define OSC_CLK                         (4*OSC_5MHZ)
  77 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  78
  79 /*
  80  * Serial console configuration
  81  */
  82
  83 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  84 #define CONFIG_CONS_INDEX               1
  85 #define CONFIG_SYS_NS16550_SERIAL
  86 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  87 #ifndef CONFIG_DM_SERIAL
  88 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  89 #endif
  90 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  91
  92 /*
  93  * SD (MMC) controller
  94  */
  95 #define CONFIG_FTSDC010
  96 #define CONFIG_FTSDC010_NUMBER          1
  97 #define CONFIG_FTSDC010_SDIO
  98
  99 /*
 100  * Miscellaneous configurable options
 101  */
 102 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 103
 104 /* Print Buffer Size */
 105 #define CONFIG_SYS_PBSIZE       \
 106         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 107
 108 /* max number of command args */
 109 #define CONFIG_SYS_MAXARGS      16
 110
 111 /* Boot Argument Buffer Size */
 112 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 113
 114 /*
 115  * Size of malloc() pool
 116  */
 117 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 118 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 119
 120 /*
 121  * Physical Memory Map
 122  */
 123 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
 124
 125 #define PHYS_SDRAM_1 \
 126         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 127
 128 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 129
 130 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
 131 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
 132
 133 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 134
 135 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 136                                         GENERATED_GBL_DATA_SIZE)
 137
 138 /*
 139  * Load address and memory test area should agree with
 140  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
 141  */
 142 #define CONFIG_SYS_LOAD_ADDR            0x300000
 143
 144 /* memtest works on 63 MB in DRAM */
 145 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 146 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 147
 148 /*
 149  * Static memory controller configuration
 150  */
 151 #define CONFIG_FTSMC020
 152
 153 #ifdef CONFIG_FTSMC020
 154 #include <faraday/ftsmc020.h>
 155
 156 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 157         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 158         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 159 }
 160
 161 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 162 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 163                                          FTSMC020_BANK_SIZE_32M |       \
 164                                          FTSMC020_BANK_MBW_32)
 165
 166 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 167                                          FTSMC020_TPR_AST(1)    |       \
 168                                          FTSMC020_TPR_CTW(1)    |       \
 169                                          FTSMC020_TPR_ATI(1)    |       \
 170                                          FTSMC020_TPR_AT2(1)    |       \
 171                                          FTSMC020_TPR_WTC(1)    |       \
 172                                          FTSMC020_TPR_AHT(1)    |       \
 173                                          FTSMC020_TPR_TRNA(1))
 174 #endif
 175
 176 /*
 177  * FLASH on ADP_AG101P is connected to BANK0
 178  * Just disalbe the other BANK to avoid detection error.
 179  */
 180 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 181                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 182                                  FTSMC020_BANK_SIZE_32M           |     \
 183                                  FTSMC020_BANK_MBW_32)
 184
 185 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 186                                  FTSMC020_TPR_CTW(3)   |        \
 187                                  FTSMC020_TPR_ATI(0xf) |        \
 188                                  FTSMC020_TPR_AT2(3)   |        \
 189                                  FTSMC020_TPR_WTC(3)   |        \
 190                                  FTSMC020_TPR_AHT(3)   |        \
 191                                  FTSMC020_TPR_TRNA(0xf))
 192
 193 #define FTSMC020_BANK1_CONFIG   (0x00)
 194 #define FTSMC020_BANK1_TIMING   (0x00)
 195 #endif /* CONFIG_FTSMC020 */
 196
 197 /*
 198  * FLASH and environment organization
 199  */
 200 /* use CFI framework */
 201 #define CONFIG_SYS_FLASH_CFI
 202 #define CONFIG_FLASH_CFI_DRIVER
 203
 204 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 205 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 206 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 207
 208 /* support JEDEC */
 209 #ifdef CONFIG_CFI_FLASH
 210 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
 211 #endif
 212
 213 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 214 #define PHYS_FLASH_1                    0x88000000      /* BANK 0 */
 215 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 216 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 217 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 218
 219 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 220 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 221
 222 /* max number of memory banks */
 223 /*
 224  * There are 4 banks supported for this Controller,
 225  * but we have only 1 bank connected to flash on board
 226  */
 227 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 228 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 229 #endif
 230 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 231
 232 /* max number of sectors on one chip */
 233 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
 234 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 235 #define CONFIG_SYS_MAX_FLASH_SECT       512
 236
 237 /* environments */
 238 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 239 #define CONFIG_ENV_SIZE                 8192
 240 #define CONFIG_ENV_OVERWRITE
 241
 242 /*
 243  * For booting Linux, the board info and command line data
 244  * have to be in the first 16 MB of memory, since this is
 245  * the maximum mapped by the Linux kernel during initialization.
 246  */
 247
 248 /* Initial Memory map for Linux*/
 249 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 250 /* Increase max gunzip size */
 251 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 252
 253 #endif  /* __CONFIG_H */