include/configs/adp-ae3xx.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch-ae3xx/ae3xx.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_USE_INTERRUPT
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
  22
  23 #define CONFIG_CMDLINE_EDITING
  24 #define CONFIG_PANIC_HANG
  25
  26 #define CONFIG_SYS_ICACHE_OFF
  27 #define CONFIG_SYS_DCACHE_OFF
  28
  29 #define CONFIG_BOOTP_SEND_HOSTNAME
  30 #define CONFIG_BOOTP_SERVERIP
  31
  32 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  33 #define CONFIG_SYS_TEXT_BASE    0x00500000
  34 #ifdef CONFIG_OF_CONTROL
  35 #undef CONFIG_OF_SEPARATE
  36 #define CONFIG_OF_EMBED
  37 #endif
  38 #else
  39
  40 #define CONFIG_SYS_TEXT_BASE    0x80000000
  41 #endif
  42
  43 /*
  44  * Timer
  45  */
  46 #define CONFIG_SYS_CLK_FREQ     39062500
  47 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  48
  49 /*
  50  * Use Externel CLOCK or PCLK
  51  */
  52 #undef CONFIG_FTRTC010_EXTCLK
  53
  54 #ifndef CONFIG_FTRTC010_EXTCLK
  55 #define CONFIG_FTRTC010_PCLK
  56 #endif
  57
  58 #ifdef CONFIG_FTRTC010_EXTCLK
  59 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  60 #else
  61 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  62 #endif
  63
  64 #define TIMER_LOAD_VAL  0xffffffff
  65
  66 /*
  67  * Real Time Clock
  68  */
  69 #define CONFIG_RTC_FTRTC010
  70
  71 /*
  72  * Real Time Clock Divider
  73  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  74  */
  75 #define OSC_5MHZ                        (5*1000000)
  76 #define OSC_CLK                         (4*OSC_5MHZ)
  77 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  78
  79 /*
  80  * Serial console configuration
  81  */
  82
  83 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  84 #define CONFIG_CONS_INDEX               1
  85 #define CONFIG_SYS_NS16550_SERIAL
  86 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  87 #ifndef CONFIG_DM_SERIAL
  88 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  89 #endif
  90 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  91
  92 /*
  93  * SD (MMC) controller
  94  */
  95 #define CONFIG_FTSDC010
  96 #define CONFIG_FTSDC010_NUMBER          1
  97 #define CONFIG_FTSDC010_SDIO
  98
  99 /*
 100  * Miscellaneous configurable options
 101  */
 102 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 103 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 104
 105 /* Print Buffer Size */
 106 #define CONFIG_SYS_PBSIZE       \
 107         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 108
 109 /* max number of command args */
 110 #define CONFIG_SYS_MAXARGS      16
 111
 112 /* Boot Argument Buffer Size */
 113 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 114
 115 /*
 116  * Size of malloc() pool
 117  */
 118 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 119 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 120
 121 /*
 122  * Physical Memory Map
 123  */
 124 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
 125
 126 #define PHYS_SDRAM_1 \
 127         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 128
 129 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 130
 131 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
 132 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
 133
 134 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 135
 136 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 137                                         GENERATED_GBL_DATA_SIZE)
 138
 139 /*
 140  * Load address and memory test area should agree with
 141  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
 142  */
 143 #define CONFIG_SYS_LOAD_ADDR            0x300000
 144
 145 /* memtest works on 63 MB in DRAM */
 146 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 147 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 148
 149 /*
 150  * Static memory controller configuration
 151  */
 152 #define CONFIG_FTSMC020
 153
 154 #ifdef CONFIG_FTSMC020
 155 #include <faraday/ftsmc020.h>
 156
 157 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 158         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 159         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 160 }
 161
 162 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 163 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 164                                          FTSMC020_BANK_SIZE_32M |       \
 165                                          FTSMC020_BANK_MBW_32)
 166
 167 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 168                                          FTSMC020_TPR_AST(1)    |       \
 169                                          FTSMC020_TPR_CTW(1)    |       \
 170                                          FTSMC020_TPR_ATI(1)    |       \
 171                                          FTSMC020_TPR_AT2(1)    |       \
 172                                          FTSMC020_TPR_WTC(1)    |       \
 173                                          FTSMC020_TPR_AHT(1)    |       \
 174                                          FTSMC020_TPR_TRNA(1))
 175 #endif
 176
 177 /*
 178  * FLASH on ADP_AG101P is connected to BANK0
 179  * Just disalbe the other BANK to avoid detection error.
 180  */
 181 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 182                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 183                                  FTSMC020_BANK_SIZE_32M           |     \
 184                                  FTSMC020_BANK_MBW_32)
 185
 186 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 187                                  FTSMC020_TPR_CTW(3)   |        \
 188                                  FTSMC020_TPR_ATI(0xf) |        \
 189                                  FTSMC020_TPR_AT2(3)   |        \
 190                                  FTSMC020_TPR_WTC(3)   |        \
 191                                  FTSMC020_TPR_AHT(3)   |        \
 192                                  FTSMC020_TPR_TRNA(0xf))
 193
 194 #define FTSMC020_BANK1_CONFIG   (0x00)
 195 #define FTSMC020_BANK1_TIMING   (0x00)
 196 #endif /* CONFIG_FTSMC020 */
 197
 198 /*
 199  * FLASH and environment organization
 200  */
 201 /* use CFI framework */
 202 #define CONFIG_SYS_FLASH_CFI
 203 #define CONFIG_FLASH_CFI_DRIVER
 204
 205 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 206 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 207 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 208
 209 /* support JEDEC */
 210 #ifdef CONFIG_CFI_FLASH
 211 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
 212 #endif
 213
 214 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 215 #define PHYS_FLASH_1                    0x88000000      /* BANK 0 */
 216 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 217 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 218 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 219
 220 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 221 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 222
 223 /* max number of memory banks */
 224 /*
 225  * There are 4 banks supported for this Controller,
 226  * but we have only 1 bank connected to flash on board
 227  */
 228 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 229 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 230 #endif
 231 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 232
 233 /* max number of sectors on one chip */
 234 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
 235 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 236 #define CONFIG_SYS_MAX_FLASH_SECT       512
 237
 238 /* environments */
 239 #define CONFIG_ENV_IS_IN_FLASH
 240 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 241 #define CONFIG_ENV_SIZE                 8192
 242 #define CONFIG_ENV_OVERWRITE
 243
 244 /*
 245  * For booting Linux, the board info and command line data
 246  * have to be in the first 16 MB of memory, since this is
 247  * the maximum mapped by the Linux kernel during initialization.
 248  */
 249
 250 /* Initial Memory map for Linux*/
 251 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 252 /* Increase max gunzip size */
 253 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 254
 255 #endif  /* __CONFIG_H */