include/configs/adp-ag101p.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/ag101.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_ADP_AG101P
  18
  19 #define CONFIG_USE_INTERRUPT
  20
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 /*
  24  * Definitions related to passing arguments to kernel.
  25  */
  26 #define CONFIG_CMDLINE_TAG                      /* send commandline to Kernel */
  27 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
  28 #define CONFIG_INITRD_TAG                       /* send initrd params */
  29
  30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
  31 #define CONFIG_MEM_REMAP
  32 #endif
  33
  34 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  35 #define CONFIG_SYS_TEXT_BASE    0x03200000
  36 #else
  37 #define CONFIG_SYS_TEXT_BASE    0x00000000
  38 #endif
  39
  40 /*
  41  * Timer
  42  */
  43 #define CONFIG_SYS_CLK_FREQ     39062500
  44 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  45
  46 /*
  47  * Use Externel CLOCK or PCLK
  48  */
  49 #undef CONFIG_FTRTC010_EXTCLK
  50
  51 #ifndef CONFIG_FTRTC010_EXTCLK
  52 #define CONFIG_FTRTC010_PCLK
  53 #endif
  54
  55 #ifdef CONFIG_FTRTC010_EXTCLK
  56 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  57 #else
  58 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  59 #endif
  60
  61 #define TIMER_LOAD_VAL  0xffffffff
  62
  63 /*
  64  * Real Time Clock
  65  */
  66 #define CONFIG_RTC_FTRTC010
  67
  68 /*
  69  * Real Time Clock Divider
  70  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  71  */
  72 #define OSC_5MHZ                        (5*1000000)
  73 #define OSC_CLK                         (4*OSC_5MHZ)
  74 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  75
  76 /*
  77  * Serial console configuration
  78  */
  79
  80 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  81 #define CONFIG_BAUDRATE                 38400
  82 #define CONFIG_CONS_INDEX               1
  83 #define CONFIG_SYS_NS16550
  84 #define CONFIG_SYS_NS16550_SERIAL
  85 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  86 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  87 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  88
  89 /*
  90  * Ethernet
  91  */
  92 #define CONFIG_FTMAC100
  93
  94 #define CONFIG_BOOTDELAY        3
  95
  96 /*
  97  * SD (MMC) controller
  98  */
  99 #define CONFIG_MMC
 100 #define CONFIG_CMD_MMC
 101 #define CONFIG_GENERIC_MMC
 102 #define CONFIG_DOS_PARTITION
 103 #define CONFIG_FTSDC010
 104 #define CONFIG_FTSDC010_NUMBER          1
 105 #define CONFIG_FTSDC010_SDIO
 106 #define CONFIG_CMD_FAT
 107 #define CONFIG_CMD_EXT2
 108
 109 /*
 110  * Command line configuration.
 111  */
 112 #include <config_cmd_default.h>
 113
 114 #define CONFIG_CMD_CACHE
 115 #define CONFIG_CMD_DATE
 116 #define CONFIG_CMD_PING
 117
 118 /*
 119  * Miscellaneous configurable options
 120  */
 121 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 122 #define CONFIG_SYS_PROMPT       "NDS32 # "      /* Monitor Command Prompt */
 123 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 124
 125 /* Print Buffer Size */
 126 #define CONFIG_SYS_PBSIZE       \
 127         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 128
 129 /* max number of command args */
 130 #define CONFIG_SYS_MAXARGS      16
 131
 132 /* Boot Argument Buffer Size */
 133 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 134
 135 /*
 136  * Size of malloc() pool
 137  */
 138 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 139 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 140
 141 /*
 142  * size in bytes reserved for initial data
 143  */
 144 #define CONFIG_SYS_GBL_DATA_SIZE        128
 145
 146 /*
 147  * AHB Controller configuration
 148  */
 149 #define CONFIG_FTAHBC020S
 150
 151 #ifdef CONFIG_FTAHBC020S
 152 #include <faraday/ftahbc020s.h>
 153
 154 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 155 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
 156
 157 /*
 158  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
 159  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
 160  * in C language.
 161  */
 162 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 163         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 164                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 165 #endif
 166
 167 /*
 168  * Watchdog
 169  */
 170 #define CONFIG_FTWDT010_WATCHDOG
 171
 172 /*
 173  * PMU Power controller configuration
 174  */
 175 #define CONFIG_PMU
 176 #define CONFIG_FTPMU010_POWER
 177
 178 #ifdef CONFIG_FTPMU010_POWER
 179 #include <faraday/ftpmu010.h>
 180 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
 181 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 182                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 183                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 184                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 185                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
 186                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
 187                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
 188 #endif
 189
 190 /*
 191  * SDRAM controller configuration
 192  */
 193 #define CONFIG_FTSDMC021
 194
 195 #ifdef CONFIG_FTSDMC021
 196 #include <faraday/ftsdmc021.h>
 197
 198 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRAS(2)  |       \
 199                                          FTSDMC021_TP1_TRP(1)   |       \
 200                                          FTSDMC021_TP1_TRCD(1)  |       \
 201                                          FTSDMC021_TP1_TRF(3)   |       \
 202                                          FTSDMC021_TP1_TWR(1)   |       \
 203                                          FTSDMC021_TP1_TCL(2))
 204
 205 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
 206                                          FTSDMC021_TP2_INI_REFT(8) |    \
 207                                          FTSDMC021_TP2_REF_INTV(0x180))
 208
 209 /*
 210  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
 211  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
 212  * C language.
 213  */
 214 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
 215                                          FTSDMC021_CR1_DSZ(3)    |      \
 216                                          FTSDMC021_CR1_MBW(2)    |      \
 217                                          FTSDMC021_CR1_BNKSIZE(6))
 218
 219 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
 220                                          FTSDMC021_CR2_IREF      |      \
 221                                          FTSDMC021_CR2_ISMR)
 222
 223 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 224 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
 225                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
 226
 227 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \
 228         (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
 229 #define CONFIG_SYS_FTSDMC021_BANK1_BSR  (FTSDMC021_BANK_ENABLE   |      \
 230                                          CONFIG_SYS_FTSDMC021_BANK1_BASE)
 231 #endif
 232
 233 /*
 234  * Physical Memory Map
 235  */
 236 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
 237 #define PHYS_SDRAM_0            0x00000000      /* SDRAM Bank #1 */
 238 #if defined(CONFIG_MEM_REMAP)
 239 #define PHYS_SDRAM_0_AT_INIT    0x10000000      /* SDRAM Bank #1 before remap*/
 240 #endif
 241 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 242 #define PHYS_SDRAM_0            0x10000000      /* SDRAM Bank #1 */
 243 #endif
 244 #define PHYS_SDRAM_1 \
 245         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 246
 247 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 248 #define PHYS_SDRAM_0_SIZE       0x04000000      /* 64 MB */
 249 #define PHYS_SDRAM_1_SIZE       0x04000000      /* 64 MB */
 250
 251 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 252
 253 #ifdef CONFIG_MEM_REMAP
 254 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 255                                         GENERATED_GBL_DATA_SIZE)
 256 #else
 257 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 258                                         GENERATED_GBL_DATA_SIZE)
 259 #endif /* CONFIG_MEM_REMAP */
 260
 261 /*
 262  * Load address and memory test area should agree with
 263  * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
 264  */
 265 #define CONFIG_SYS_LOAD_ADDR            0x300000
 266
 267 /* memtest works on 63 MB in DRAM */
 268 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 269 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 270
 271 /*
 272  * Static memory controller configuration
 273  */
 274 #define CONFIG_FTSMC020
 275
 276 #ifdef CONFIG_FTSMC020
 277 #include <faraday/ftsmc020.h>
 278
 279 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 280         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 281         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 282 }
 283
 284 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 285 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 286                                          FTSMC020_BANK_SIZE_32M |       \
 287                                          FTSMC020_BANK_MBW_32)
 288
 289 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 290                                          FTSMC020_TPR_AST(1)    |       \
 291                                          FTSMC020_TPR_CTW(1)    |       \
 292                                          FTSMC020_TPR_ATI(1)    |       \
 293                                          FTSMC020_TPR_AT2(1)    |       \
 294                                          FTSMC020_TPR_WTC(1)    |       \
 295                                          FTSMC020_TPR_AHT(1)    |       \
 296                                          FTSMC020_TPR_TRNA(1))
 297 #endif
 298
 299 /*
 300  * FLASH on ADP_AG101P is connected to BANK0
 301  * Just disalbe the other BANK to avoid detection error.
 302  */
 303 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 304                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 305                                  FTSMC020_BANK_SIZE_32M           |     \
 306                                  FTSMC020_BANK_MBW_32)
 307
 308 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 309                                  FTSMC020_TPR_CTW(3)   |        \
 310                                  FTSMC020_TPR_ATI(0xf) |        \
 311                                  FTSMC020_TPR_AT2(3)   |        \
 312                                  FTSMC020_TPR_WTC(3)   |        \
 313                                  FTSMC020_TPR_AHT(3)   |        \
 314                                  FTSMC020_TPR_TRNA(0xf))
 315
 316 #define FTSMC020_BANK1_CONFIG   (0x00)
 317 #define FTSMC020_BANK1_TIMING   (0x00)
 318 #endif /* CONFIG_FTSMC020 */
 319
 320 /*
 321  * FLASH and environment organization
 322  */
 323 /* use CFI framework */
 324 #define CONFIG_SYS_FLASH_CFI
 325 #define CONFIG_FLASH_CFI_DRIVER
 326
 327 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 328 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 329
 330 /* support JEDEC */
 331
 332 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 333 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 334 #define PHYS_FLASH_1                    0x80400000      /* BANK 1 */
 335 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT */
 336 #ifdef CONFIG_MEM_REMAP
 337 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
 338 #else
 339 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
 340 #endif  /* CONFIG_MEM_REMAP */
 341 #endif  /* CONFIG_SKIP_LOWLEVEL_INIT */
 342
 343 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 344 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 345 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 346
 347 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 348 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 349
 350 /* max number of memory banks */
 351 /*
 352  * There are 4 banks supported for this Controller,
 353  * but we have only 1 bank connected to flash on board
 354  */
 355 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 356
 357 /* max number of sectors on one chip */
 358 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2*2)
 359 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 360 #define CONFIG_SYS_MAX_FLASH_SECT       128
 361
 362 /* environments */
 363 #define CONFIG_ENV_IS_IN_FLASH
 364 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 365 #define CONFIG_ENV_SIZE                 8192
 366 #define CONFIG_ENV_OVERWRITE
 367
 368 #endif  /* __CONFIG_H */