include/configs/at91sam9261ek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9261EK board.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #define CONFIG_AT91_LEGACY
  31
  32 /* ARM asynchronous clock */
  33 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* 18.432 MHz crystal */
  34 #define CONFIG_SYS_HZ           1000
  35
  36 #define CONFIG_ARM926EJS        1       /* This is an ARM926EJS Core    */
  37 #ifdef CONFIG_AT91SAM9G10EK
  38 #define CONFIG_AT91SAM9G10      1       /* It's an Atmel AT91SAM9G10 SoC*/
  39 #else
  40 #define CONFIG_AT91SAM9261      1       /* It's an Atmel AT91SAM9261 SoC*/
  41 #endif
  42 #define CONFIG_ARCH_CPU_INIT
  43 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff  */
  44
  45 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs      */
  46 #define CONFIG_SETUP_MEMORY_TAGS 1
  47 #define CONFIG_INITRD_TAG       1
  48
  49 #define CONFIG_SKIP_LOWLEVEL_INIT
  50
  51 /*
  52  * Hardware drivers
  53  */
  54 #define CONFIG_AT91_GPIO        1
  55 #define CONFIG_ATMEL_USART      1
  56 #undef CONFIG_USART0
  57 #undef CONFIG_USART1
  58 #undef CONFIG_USART2
  59 #define CONFIG_USART3           1       /* USART 3 is DBGU */
  60
  61 /* LCD */
  62 #define CONFIG_LCD                      1
  63 #define LCD_BPP                         LCD_COLOR8
  64 #define CONFIG_LCD_LOGO                 1
  65 #undef LCD_TEST_PATTERN
  66 #define CONFIG_LCD_INFO                 1
  67 #define CONFIG_LCD_INFO_BELOW_LOGO      1
  68 #define CONFIG_SYS_WHITE_ON_BLACK               1
  69 #define CONFIG_ATMEL_LCD                1
  70 #ifdef CONFIG_AT91SAM9261EK
  71 #define CONFIG_ATMEL_LCD_BGR555         1
  72 #else
  73 #define CONFIG_AT91SAM9G10_LCD_BASE             0x23E00000      /* LCD is no more in SRAM */
  74 #endif
  75 #define CONFIG_SYS_CONSOLE_IS_IN_ENV            1
  76
  77 /* LED */
  78 #define CONFIG_AT91_LED
  79 #define CONFIG_RED_LED          AT91_PIN_PA23   /* this is the power led */
  80 #define CONFIG_GREEN_LED        AT91_PIN_PA13   /* this is the user1 led */
  81 #define CONFIG_YELLOW_LED       AT91_PIN_PA14   /* this is the user2 led */
  82
  83 #define CONFIG_BOOTDELAY        3
  84
  85 /*
  86  * BOOTP options
  87  */
  88 #define CONFIG_BOOTP_BOOTFILESIZE       1
  89 #define CONFIG_BOOTP_BOOTPATH           1
  90 #define CONFIG_BOOTP_GATEWAY            1
  91 #define CONFIG_BOOTP_HOSTNAME           1
  92
  93 /*
  94  * Command line configuration.
  95  */
  96 #include <config_cmd_default.h>
  97 #undef CONFIG_CMD_BDI
  98 #undef CONFIG_CMD_FPGA
  99 #undef CONFIG_CMD_IMI
 100 #undef CONFIG_CMD_IMLS
 101 #undef CONFIG_CMD_LOADS
 102 #undef CONFIG_CMD_SOURCE
 103
 104 #define CONFIG_CMD_PING         1
 105 #define CONFIG_CMD_DHCP         1
 106 #define CONFIG_CMD_NAND         1
 107 #define CONFIG_CMD_USB          1
 108
 109 /* SDRAM */
 110 #define CONFIG_NR_DRAM_BANKS            1
 111 #define PHYS_SDRAM                      0x20000000
 112 #define PHYS_SDRAM_SIZE                 0x04000000      /* 64 megs */
 113
 114 /* DataFlash */
 115 #define CONFIG_ATMEL_DATAFLASH_SPI
 116 #define CONFIG_HAS_DATAFLASH            1
 117 #define CONFIG_SYS_SPI_WRITE_TOUT               (5*CONFIG_SYS_HZ)
 118 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          2
 119 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 120 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 121 #define AT91_SPI_CLK                    15000000
 122 #define DATAFLASH_TCSS                  (0x1a << 16)
 123 #define DATAFLASH_TCHS                  (0x1 << 24)
 124
 125 /* NAND flash */
 126 #ifdef CONFIG_CMD_NAND
 127 #define CONFIG_NAND_ATMEL
 128 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 129 #define CONFIG_SYS_NAND_BASE                    0x40000000
 130 #define CONFIG_SYS_NAND_DBW_8                   1
 131 /* our ALE is AD22 */
 132 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 133 /* our CLE is AD21 */
 134 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 135 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 136 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC15
 137
 138 #endif
 139
 140 /* NOR flash - no real flash on this board */
 141 #define CONFIG_SYS_NO_FLASH                     1
 142
 143 /* Ethernet */
 144 #define CONFIG_NET_MULTI                1
 145 #define CONFIG_DRIVER_DM9000            1
 146 #define CONFIG_DM9000_BASE              0x30000000
 147 #define DM9000_IO                       CONFIG_DM9000_BASE
 148 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 149 #define CONFIG_DM9000_USE_16BIT         1
 150 #define CONFIG_DM9000_NO_SROM           1
 151 #define CONFIG_NET_RETRY_COUNT          20
 152 #define CONFIG_RESET_PHY_R              1
 153
 154 /* USB */
 155 #define CONFIG_USB_ATMEL
 156 #define CONFIG_USB_OHCI_NEW             1
 157 #define CONFIG_DOS_PARTITION            1
 158 #define CONFIG_SYS_USB_OHCI_CPU_INIT            1
 159 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000      /* AT91SAM9261_UHP_BASE */
 160 #ifdef CONFIG_AT91SAM9G10EK
 161 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9g10"
 162 #else
 163 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 164 #endif
 165 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 166 #define CONFIG_USB_STORAGE              1
 167 #define CONFIG_CMD_FAT                  1
 168
 169 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 170
 171 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
 172 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 173
 174 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 175
 176 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 177 #define CONFIG_ENV_IS_IN_DATAFLASH      1
 178 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 179 #define CONFIG_ENV_OFFSET       0x4200
 180 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 181 #define CONFIG_ENV_SIZE         0x4200
 182 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 183 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 184                                 "root=/dev/mtdblock0 "                  \
 185                                 "mtdparts=atmel_nand:-(root) "          \
 186                                 "rw rootfstype=jffs2"
 187
 188 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 189
 190 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
 191 #define CONFIG_ENV_IS_IN_DATAFLASH      1
 192 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 193 #define CONFIG_ENV_OFFSET       0x4200
 194 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
 195 #define CONFIG_ENV_SIZE         0x4200
 196 #define CONFIG_BOOTCOMMAND      "cp.b 0xD0042000 0x22000000 0x210000; bootm"
 197 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 198                                 "root=/dev/mtdblock0 "                  \
 199                                 "mtdparts=atmel_nand:-(root) "          \
 200                                 "rw rootfstype=jffs2"
 201
 202 #else /* CONFIG_SYS_USE_NANDFLASH */
 203
 204 /* bootstrap + u-boot + env + linux in nandflash */
 205 #define CONFIG_ENV_IS_IN_NAND   1
 206 #define CONFIG_ENV_OFFSET               0x60000
 207 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 208 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 209 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 210 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 211                                 "root=/dev/mtdblock5 "                  \
 212                                 "mtdparts=atmel_nand:128k(bootstrap)ro,"        \
 213                                 "256k(uboot)ro,128k(env1)ro,"           \
 214                                 "128k(env2)ro,2M(linux),-(root) "       \
 215                                 "rw rootfstype=jffs2"
 216
 217 #endif
 218
 219 #define CONFIG_BAUDRATE         115200
 220 #define CONFIG_SYS_BAUDRATE_TABLE       {115200 , 19200, 38400, 57600, 9600 }
 221
 222 #define CONFIG_SYS_PROMPT               "U-Boot> "
 223 #define CONFIG_SYS_CBSIZE               256
 224 #define CONFIG_SYS_MAXARGS              16
 225 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 226 #define CONFIG_SYS_LONGHELP             1
 227 #define CONFIG_CMDLINE_EDITING  1
 228
 229 /*
 230  * Size of malloc() pool
 231  */
 232 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 233
 234 #define CONFIG_STACKSIZE        (32*1024)       /* regular stack */
 235
 236 #ifdef CONFIG_USE_IRQ
 237 #error CONFIG_USE_IRQ not supported
 238 #endif
 239
 240 #endif