include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015-2016 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 modules.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_SYS_FSL_CLK
  18
  19 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  20
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 #define CONFIG_CMD_FUSE
  24 #ifdef CONFIG_CMD_FUSE
  25 #define CONFIG_MXC_OCOTP
  26 #endif
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  30
  31 /* Allow to overwrite serial and ethaddr */
  32 #define CONFIG_ENV_OVERWRITE
  33 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  34 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  35
  36 /* NAND support */
  37 #define CONFIG_CMD_NAND
  38 #define CONFIG_SYS_NAND_ONFI_DETECTION
  39 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  40 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  41
  42 /* Dynamic MTD partition support */
  43 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  44 #define CONFIG_MTD_PARTITIONS
  45 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  46 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  47 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  48                                 "128k(vf-bcb)ro,"               \
  49                                 "1408k(u-boot)ro,"              \
  50                                 "512k(u-boot-env),"             \
  51                                 "-(ubi)"
  52
  53 #define CONFIG_FSL_ESDHC
  54 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  55 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  56
  57 #define CONFIG_RBTREE
  58 #define CONFIG_LZO
  59 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  60
  61 #define CONFIG_FEC_MXC
  62 #define CONFIG_MII
  63 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  64 #define CONFIG_FEC_XCV_TYPE             RMII
  65 #define CONFIG_FEC_MXC_PHYADDR          0
  66 #define CONFIG_PHYLIB
  67 #define CONFIG_PHY_MICREL
  68
  69 #define CONFIG_IPADDR           192.168.10.2
  70 #define CONFIG_NETMASK          255.255.255.0
  71 #define CONFIG_SERVERIP         192.168.10.1
  72
  73 #define CONFIG_LOADADDR                 0x80008000
  74 #define CONFIG_FDTADDR                  0x84000000
  75
  76 /* We boot from the gfxRAM area of the OCRAM. */
  77 #define CONFIG_SYS_TEXT_BASE            0x3f408000
  78 #define CONFIG_BOARD_SIZE_LIMIT         524288
  79
  80 #define SD_BOOTCMD \
  81         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  82         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  83         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  84         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  85         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
  86         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  87
  88 #define NFS_BOOTCMD \
  89         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  90         "nfsboot=run setup; " \
  91         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
  92         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  93         "dhcp ${kernel_addr_r} && "     \
  94         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  95         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  96
  97 #define UBI_BOOTCMD     \
  98         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  99         "ubi.fm_autoconvert=1\0" \
 100         "ubiboot=run setup; " \
 101         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 102         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 103         "ubi part ubi && " \
 104         "ubi read ${kernel_addr_r} kernel && " \
 105         "ubi read ${fdt_addr_r} dtb && " \
 106         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 107
 108 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 109
 110 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 111
 112 #define CONFIG_EXTRA_ENV_SETTINGS \
 113         "kernel_addr_r=0x82000000\0" \
 114         "fdt_addr_r=0x84000000\0" \
 115         "kernel_file=zImage\0" \
 116         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 117         "fdt_board=eval-v3\0" \
 118         "fdt_fixup=;\0" \
 119         "defargs=\0" \
 120         "console=ttyLP0\0" \
 121         "setup=setenv setupargs " \
 122         "console=tty1 console=${console}" \
 123         ",${baudrate}n8 ${memargs}\0" \
 124         "setsdupdate=mmc rescan && set interface mmc && " \
 125         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 126         "source ${loadaddr}\0" \
 127         "setusbupdate=usb start && set interface usb && " \
 128         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 129         "source ${loadaddr}\0" \
 130         "setupdate=run setsdupdate || run setusbupdate\0" \
 131         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 132         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 133         SD_BOOTCMD \
 134         NFS_BOOTCMD \
 135         UBI_BOOTCMD
 136
 137 /* Miscellaneous configurable options */
 138 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 139 #undef CONFIG_AUTO_COMPLETE
 140 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 141 #define CONFIG_SYS_PBSIZE               \
 142                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 143 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 144 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 145
 146 #define CONFIG_SYS_MEMTEST_START        0x80010000
 147 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 148
 149 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 150 #define CONFIG_SYS_HZ                   1000
 151 #define CONFIG_CMDLINE_EDITING
 152
 153 /* Physical memory map */
 154 #define CONFIG_NR_DRAM_BANKS            1
 155 #define PHYS_SDRAM                      (0x80000000)
 156 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 157
 158 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 159 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 160 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 161
 162 #define CONFIG_SYS_INIT_SP_OFFSET \
 163         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 164 #define CONFIG_SYS_INIT_SP_ADDR \
 165         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 166
 167 /* Environment organization */
 168
 169 #ifdef CONFIG_ENV_IS_IN_MMC
 170 #define CONFIG_SYS_MMC_ENV_DEV          0
 171 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 172 #define CONFIG_ENV_SIZE                 (8 * 1024)
 173 #endif
 174
 175 #ifdef CONFIG_ENV_IS_IN_NAND
 176 #define CONFIG_ENV_SIZE                 (64 * 2048)
 177 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 178 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 179 #endif
 180
 181 /* USB Host Support */
 182 #define CONFIG_USB_EHCI
 183 #define CONFIG_USB_EHCI_VF
 184 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 185 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 186
 187 /* USB DFU */
 188 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 189
 190 /* USB Storage */
 191 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 192
 193 #endif /* __CONFIG_H */