include/configs/cpci5200.h

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22
  23  */
  24
  25 /*************************************************************************
  26  * (c) 2005 esd gmbh Hannover
  27  *
  28  *
  29  * from IceCube.h file
  30  * by Reinhard Arlt reinhard.arlt@esd-electronics.com
  31  *
  32  *************************************************************************/
  33
  34 #ifndef __CONFIG_H
  35 #define __CONFIG_H
  36
  37 /*
  38  * High Level Configuration Options
  39  * (easy to change)
  40  */
  41
  42 #define CONFIG_MPC5200          1       /* This is an MPC5xxx CPU */
  43 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  44 #define CONFIG_ICECUBE          1       /* ... on IceCube board   */
  45 #define CONFIG_CPCI5200         1       /* ... on CPCI5200  board */
  46 #define CONFIG_MPC5200_DDR      1       /* ... use DDR RAM        */
  47
  48 #ifndef CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_TEXT_BASE    0xFFF00000      /* Standard: boot high */
  50 #endif
  51
  52 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000        /* ... running at 33.000000MHz */
  53
  54 #define CONFIG_HIGH_BATS        1       /* High BATs supported    */
  55
  56 /*
  57  * Serial console configuration
  58  */
  59 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  60 #define CONFIG_BAUDRATE         9600    /* ... at 115200 bps */
  61 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  62
  63 /*
  64  * PCI Mapping:
  65  * 0x40000000 - 0x4fffffff - PCI Memory
  66  * 0x50000000 - 0x50ffffff - PCI IO Space
  67  */
  68 #if 1
  69 #define CONFIG_PCI              1
  70 #if 1
  71 #define CONFIG_PCI_PNP          1
  72 #endif
  73 #define CONFIG_PCI_SCAN_SHOW    1
  74 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
  75
  76 #define CONFIG_PCI_MEM_BUS      0x40000000
  77 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  78 #define CONFIG_PCI_MEM_SIZE     0x10000000
  79
  80 #define CONFIG_PCI_IO_BUS       0x50000000
  81 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  82 #define CONFIG_PCI_IO_SIZE      0x01000000
  83 #endif
  84
  85 #define CONFIG_MII
  86 #if 0                           /* test-only !!! */
  87 #define CONFIG_NET_MULTI        1
  88 #define CONFIG_EEPRO100         1
  89 #define CONFIG_SYS_RX_ETH_BUFFER        8       /* use 8 rx buffer on eepro100  */
  90 #define CONFIG_NS8382X          1
  91 #endif
  92
  93 /* Partitions */
  94 #define CONFIG_MAC_PARTITION
  95 #define CONFIG_DOS_PARTITION
  96
  97 /* USB */
  98 #if 0
  99 #define CONFIG_USB_OHCI
 100 #define CONFIG_USB_STORAGE
 101 #endif
 102
 103 /*
 104  * BOOTP options
 105  */
 106 #define CONFIG_BOOTP_BOOTFILESIZE
 107 #define CONFIG_BOOTP_BOOTPATH
 108 #define CONFIG_BOOTP_GATEWAY
 109 #define CONFIG_BOOTP_HOSTNAME
 110
 111
 112 /*
 113  * Command line configuration.
 114  */
 115 #include <config_cmd_default.h>
 116
 117 #if defined(CONFIG_PCI)
 118 #define CONFIG_CMD_PCI
 119 #endif
 120
 121 #define CONFIG_CMD_EEPROM
 122 #define CONFIG_CMD_FAT
 123 #define CONFIG_CMD_IDE
 124 #define CONFIG_CMD_I2C
 125 #define CONFIG_CMD_BSP
 126 #define CONFIG_CMD_ELF
 127 #define CONFIG_CMD_EXT2
 128 #define CONFIG_CMD_DATE
 129
 130 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)        /* Boot low with 16 MB Flash */
 131 #   define CONFIG_SYS_LOWBOOT           1
 132 #   define CONFIG_SYS_LOWBOOT16 1
 133 #endif
 134 #if (CONFIG_SYS_TEXT_BASE == 0xFF800000)        /* Boot low with  8 MB Flash */
 135 #   define CONFIG_SYS_LOWBOOT           1
 136 #   define CONFIG_SYS_LOWBOOT08 1
 137 #endif
 138
 139 /*
 140  * Autobooting
 141  */
 142 #define CONFIG_BOOTDELAY        3       /* autoboot after 5 seconds */
 143
 144 #define CONFIG_PREBOOT  "echo;" \
 145         "echo Welcome to esd CPU CPCI/5200;" \
 146         "echo"
 147
 148 #undef  CONFIG_BOOTARGS
 149
 150 #define CONFIG_EXTRA_ENV_SETTINGS \
 151         "netdev=eth0\0" \
 152         "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
 153         "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
 154         "net_vxworks=phypower 1;sleep 2;tftp ${loadaddr} ${image};run vxworks_args;bootvx\0" \
 155         "vxworks_args=setenv bootargs fec(0,0)${host}:${image} h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script}\0" \
 156         "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script} o=fec0 \0" \
 157         "loadaddr=01000000\0" \
 158         "serverip=192.168.2.99\0" \
 159         "gatewayip=10.0.0.79\0" \
 160         "user=mu\0" \
 161         "target=cpci5200.esd\0" \
 162         "script=cpci5200.bat\0" \
 163         "image=/tftpboot/vxWorks_cpci5200\0" \
 164         "ipaddr=10.0.13.196\0" \
 165         "netmask=255.255.0.0\0" \
 166         ""
 167
 168 #define CONFIG_BOOTCOMMAND      "run flash_vxworks0"
 169
 170 #define CONFIG_RTC_M48T35A      1       /* ST Electronics M48 timekeeper */
 171 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfd010000
 172 #define CONFIG_SYS_NVRAM_SIZE           32*1024
 173
 174 /*
 175  * IPB Bus clocking configuration.
 176  */
 177 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK          /* define for 133MHz speed */
 178 /*
 179  * I2C configuration
 180  */
 181 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 182 #define CONFIG_SYS_I2C_MODULE           1       /* Select I2C module #1 or #2 */
 183
 184 #define CONFIG_SYS_I2C_SPEED            86000   /* 100 kHz */
 185 #define CONFIG_SYS_I2C_SLAVE            0x7F
 186
 187 /*
 188  * EEPROM configuration
 189  */
 190 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 191 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 192 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5
 193 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 194 #define CONFIG_SYS_I2C_MULTI_EEPROMS            1
 195 /*
 196  * Flash configuration
 197  */
 198
 199 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant           */
 200 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 201 #define CONFIG_SYS_FLASH_SIZE           0x02000000
 202 #define CONFIG_SYS_FLASH_INCREMENT      0x01000000
 203 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00000000)
 204 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max num of memory banks      */
 205 #define CONFIG_SYS_MAX_FLASH_SECT       128
 206
 207 #define CONFIG_SYS_FLASH_PROTECTION     1       /* use hardware protection           */
 208 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)  */
 209
 210 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
 211 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
 212
 213 /*
 214  * Environment settings
 215  */
 216 #if 1                           /* test-only */
 217 #define CONFIG_ENV_IS_IN_FLASH  1
 218 #define CONFIG_ENV_SIZE         0x20000
 219 #define CONFIG_ENV_SECT_SIZE    0x20000
 220 #define CONFIG_ENV_OVERWRITE    1
 221 #else
 222 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 223 #define CONFIG_ENV_OFFSET               0x0000  /* environment starts at the beginning of the EEPROM */
 224 #define CONFIG_ENV_SIZE         0x0400  /* 8192 bytes may be used for env vars */
 225                                    /* total size of a CAT24WC32 is 8192 bytes */
 226 #define CONFIG_ENV_OVERWRITE    1
 227 #endif
 228
 229 /*
 230  * Memory map
 231  */
 232 #define CONFIG_SYS_MBAR         0xF0000000
 233 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 234 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 235
 236 /* Use SRAM until RAM will be available */
 237 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 238 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 239
 240 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 241 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 242
 243 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 244 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 245 #   define CONFIG_SYS_RAMBOOT           1
 246 #endif
 247
 248 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 249 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 250 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 251
 252 /*
 253  * Ethernet configuration
 254  */
 255 #define CONFIG_MPC5xxx_FEC      1
 256 #define CONFIG_MPC5xxx_FEC_MII100
 257 /*
 258  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 259  */
 260 /* #define CONFIG_FEC_10MBIT 1 */
 261 #define CONFIG_PHY_ADDR         0x00
 262 #define CONFIG_UDP_CHECKSUM     1
 263
 264 /*
 265  * GPIO configuration
 266  */
 267 #define CONFIG_SYS_GPS_PORT_CONFIG      0x01052444
 268
 269 /*
 270  * Miscellaneous configurable options
 271  */
 272 #define CONFIG_SYS_LONGHELP             /* undef to save memory     */
 273 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt   */
 274 #if defined(CONFIG_CMD_KGDB)
 275 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 276 #else
 277 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 278 #endif
 279 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 280 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 281 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 282
 283 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 284 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 285
 286 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 287
 288 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 289
 290 #define CONFIG_SYS_VXWORKS_MAC_PTR      0x00000000      /* Pass Ethernet MAC to VxWorks */
 291
 292 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 293 #if defined(CONFIG_CMD_KGDB)
 294 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 295 #endif
 296
 297 /*
 298  * Various low-level settings
 299  */
 300 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 301 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 302
 303 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 304 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 305 #define CONFIG_SYS_BOOTCS_CFG           0x0004DD00
 306
 307 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 308 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 309
 310 #define CONFIG_SYS_CS1_START            0xfd000000
 311 #define CONFIG_SYS_CS1_SIZE             0x00010000
 312 #define CONFIG_SYS_CS1_CFG              0x10101410
 313
 314 #define CONFIG_SYS_CS3_START            0xfd010000
 315 #define CONFIG_SYS_CS3_SIZE             0x00010000
 316 #define CONFIG_SYS_CS3_CFG              0x10109410
 317
 318 #define CONFIG_SYS_CS_BURST             0x00000000
 319 #define CONFIG_SYS_CS_DEADCYCLE 0x33333333
 320
 321 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 322
 323 /*-----------------------------------------------------------------------
 324  * USB stuff
 325  *-----------------------------------------------------------------------
 326  */
 327 #define CONFIG_USB_CLOCK        0x0001BBBB
 328 #define CONFIG_USB_CONFIG       0x00001000
 329
 330 /*-----------------------------------------------------------------------
 331  * IDE/ATA stuff Supports IDE harddisk
 332  *-----------------------------------------------------------------------
 333  */
 334
 335 #undef  CONFIG_IDE_8xx_PCCARD   /* Use IDE with PC Card Adapter */
 336
 337 #undef  CONFIG_IDE_8xx_DIRECT   /* Direct IDE    not supported  */
 338 #undef  CONFIG_IDE_LED          /* LED   for ide not supported  */
 339
 340 #define CONFIG_IDE_RESET        /* reset for ide supported      */
 341 #define CONFIG_IDE_PREINIT
 342
 343 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 344 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 345
 346 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 347
 348 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 349
 350 /* Offset for data I/O                  */
 351 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 352
 353 /* Offset for normal register accesses  */
 354 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 355
 356 /* Offset for alternate registers       */
 357 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 358
 359 /* Interval between registers                                                */
 360 #define CONFIG_SYS_ATA_STRIDE           4
 361
 362 /*-----------------------------------------------------------------------
 363  * CPLD stuff
 364  */
 365 #define CONFIG_SYS_FPGA_XC95XL          1       /* using Xilinx XC95XL CPLD      */
 366 #define CONFIG_SYS_FPGA_MAX_SIZE        32*1024 /* 32kByte is enough for CPLD    */
 367
 368 /* CPLD program pin configuration */
 369 #define CONFIG_SYS_FPGA_PRG             0x20000000      /* JTAG TMS pin (ppc output)           */
 370 #define CONFIG_SYS_FPGA_CLK             0x10000000      /* JTAG TCK pin (ppc output)           */
 371 #define CONFIG_SYS_FPGA_DATA            0x20000000      /* JTAG TDO->TDI data pin (ppc output) */
 372 #define CONFIG_SYS_FPGA_DONE            0x10000000      /* JTAG TDI->TDO pin (ppc input)       */
 373
 374 #define JTAG_GPIO_ADDR_TMS      (CONFIG_SYS_MBAR + 0xB10)       /* JTAG TMS pin (GPS data out value reg.)      */
 375 #define JTAG_GPIO_ADDR_TCK      (CONFIG_SYS_MBAR + 0xC0C)       /* JTAG TCK pin (GPW data out value reg.)      */
 376 #define JTAG_GPIO_ADDR_TDI      (CONFIG_SYS_MBAR + 0xC0C)       /* JTAG TDO->TDI pin (GPW data out value reg.) */
 377 #define JTAG_GPIO_ADDR_TDO      (CONFIG_SYS_MBAR + 0xB14)       /* JTAG TDI->TDO pin (GPS data in value reg.)  */
 378
 379 #define JTAG_GPIO_ADDR_CFG      (CONFIG_SYS_MBAR + 0xB00)
 380 #define JTAG_GPIO_CFG_SET       0x00000000
 381 #define JTAG_GPIO_CFG_RESET     0x00F00000
 382
 383 #define JTAG_GPIO_ADDR_EN_TMS   (CONFIG_SYS_MBAR + 0xB04)
 384 #define JTAG_GPIO_TMS_EN_SET    0x20000000      /* Enable for GPIO */
 385 #define JTAG_GPIO_TMS_EN_RESET  0x00000000
 386 #define JTAG_GPIO_ADDR_DDR_TMS  (CONFIG_SYS_MBAR + 0xB0C)
 387 #define JTAG_GPIO_TMS_DDR_SET   0x20000000      /* Set as output   */
 388 #define JTAG_GPIO_TMS_DDR_RESET 0x00000000
 389
 390 #define JTAG_GPIO_ADDR_EN_TCK   (CONFIG_SYS_MBAR + 0xC00)
 391 #define JTAG_GPIO_TCK_EN_SET    0x20000000      /* Enable for GPIO */
 392 #define JTAG_GPIO_TCK_EN_RESET  0x00000000
 393 #define JTAG_GPIO_ADDR_DDR_TCK  (CONFIG_SYS_MBAR + 0xC08)
 394 #define JTAG_GPIO_TCK_DDR_SET   0x20000000      /* Set as output   */
 395 #define JTAG_GPIO_TCK_DDR_RESET 0x00000000
 396
 397 #define JTAG_GPIO_ADDR_EN_TDI   (CONFIG_SYS_MBAR + 0xC00)
 398 #define JTAG_GPIO_TDI_EN_SET    0x10000000      /* Enable as GPIO  */
 399 #define JTAG_GPIO_TDI_EN_RESET  0x00000000
 400 #define JTAG_GPIO_ADDR_DDR_TDI  (CONFIG_SYS_MBAR + 0xC08)
 401 #define JTAG_GPIO_TDI_DDR_SET   0x10000000      /* Set as output   */
 402 #define JTAG_GPIO_TDI_DDR_RESET 0x00000000
 403
 404 #define JTAG_GPIO_ADDR_EN_TDO   (CONFIG_SYS_MBAR + 0xB04)
 405 #define JTAG_GPIO_TDO_EN_SET    0x10000000      /* Enable as GPIO  */
 406 #define JTAG_GPIO_TDO_EN_RESET  0x00000000
 407 #define JTAG_GPIO_ADDR_DDR_TDO  (CONFIG_SYS_MBAR + 0xB0C)
 408 #define JTAG_GPIO_TDO_DDR_SET   0x00000000
 409 #define JTAG_GPIO_TDO_DDR_RESET 0x10000000      /* Set as input    */
 410
 411 #endif                          /* __CONFIG_H */