include/configs/davinci_sonata.h

   1 /*
   2  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License as
   6  * published by the Free Software Foundation; either version 2 of
   7  * the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  17  * MA 02111-1307 USA
  18  */
  19
  20 #ifndef __CONFIG_H
  21 #define __CONFIG_H
  22 #include <asm/sizes.h>
  23
  24 /*
  25  * Define this to make U-Boot skip low level initialization when loaded
  26  * by initial bootloader. Not required by NAND U-Boot version but IS
  27  * required for a NOR version used to burn the real NOR U-Boot into
  28  * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
  29  * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
  30  * NOR U-Boot is loaded directly from Flash so it must perform all the
  31  * low level initialization itself. NAND version is loaded by an initial
  32  * bootloader (UBL in TI-ese) that performs such an initialization so it's
  33  * skipped in NAND version. The third DaVinci boot mode loads a bootloader
  34  * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
  35  * performing low level init prior to loading. All that means we can NOT use
  36  * NAND version to put U-Boot into NOR because it doesn't have NOR support and
  37  * we can NOT use NOR version because it performs low level initialization
  38  * effectively destroying itself in DDR memory. That's why a separate NOR
  39  * version with this define is needed. It is loaded via UART, then one uses
  40  * it to somehow download a proper NOR version built WITHOUT this define to
  41  * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
  42  * NOR support into the initial bootloader so it won't be needed but DaVinci
  43  * static RAM might be too small for this (I have something like 2Kbytes left
  44  * as of now, without NOR support) so this might've not happened...
  45  *
  46 #define CONFIG_NOR_UART_BOOT
  47  */
  48
  49 /*=======*/
  50 /* Board */
  51 /*=======*/
  52 #define SONATA_BOARD
  53 #define CONFIG_SYS_NAND_SMALLPAGE
  54 #define CONFIG_SYS_USE_NOR
  55 /*===================*/
  56 /* SoC Configuration */
  57 /*===================*/
  58 #define CONFIG_ARM926EJS                        /* arm926ejs CPU core */
  59 #define CONFIG_SYS_CLK_FREQ     297000000       /* Arm Clock frequency */
  60 #define CONFIG_SYS_TIMERBASE            0x01c21400      /* use timer 0 */
  61 #define CONFIG_SYS_HZ_CLOCK             27000000        /* Timer Input clock freq */
  62 #define CONFIG_SYS_HZ                   1000
  63 /*====================================================*/
  64 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
  65 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
  66 /*====================================================*/
  67 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
  68 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  69 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
  70 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
  71 /*=============*/
  72 /* Memory Info */
  73 /*=============*/
  74 #define CONFIG_SYS_MALLOC_LEN           (0x10000 + 128*1024)    /* malloc() len */
  75 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* reserved for initial data */
  76 #define CONFIG_SYS_MEMTEST_START        0x80000000      /* memtest start address */
  77 #define CONFIG_SYS_MEMTEST_END          0x81000000      /* 16MB RAM test */
  78 #define CONFIG_NR_DRAM_BANKS    1               /* we have 1 bank of DRAM */
  79 #define CONFIG_STACKSIZE        (256*1024)      /* regular stack */
  80 #define PHYS_SDRAM_1            0x80000000      /* DDR Start */
  81 #define PHYS_SDRAM_1_SIZE       0x08000000      /* DDR size 128MB */
  82 #define DDR_4BANKS                              /* 4-bank DDR2 (128MB) */
  83 /*====================*/
  84 /* Serial Driver info */
  85 /*====================*/
  86 #define CONFIG_SYS_NS16550
  87 #define CONFIG_SYS_NS16550_SERIAL
  88 #define CONFIG_SYS_NS16550_REG_SIZE     4               /* NS16550 register size */
  89 #define CONFIG_SYS_NS16550_COM1 0x01c20000      /* Base address of UART0 */
  90 #define CONFIG_SYS_NS16550_CLK          27000000        /* Input clock to NS16550 */
  91 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
  92 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
  93 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  94 /*===================*/
  95 /* I2C Configuration */
  96 /*===================*/
  97 #define CONFIG_HARD_I2C
  98 #define CONFIG_DRIVER_DAVINCI_I2C
  99 #define CONFIG_SYS_I2C_SPEED            80000   /* 100Kbps won't work, silicon bug */
 100 #define CONFIG_SYS_I2C_SLAVE            10      /* Bogus, master-only in U-Boot */
 101 /*==================================*/
 102 /* Network & Ethernet Configuration */
 103 /*==================================*/
 104 #define CONFIG_DRIVER_TI_EMAC
 105 #define CONFIG_MII
 106 #define CONFIG_BOOTP_DEFAULT
 107 #define CONFIG_BOOTP_DNS
 108 #define CONFIG_BOOTP_DNS2
 109 #define CONFIG_BOOTP_SEND_HOSTNAME
 110 #define CONFIG_NET_RETRY_COUNT  10
 111 /*=====================*/
 112 /* Flash & Environment */
 113 /*=====================*/
 114 #ifdef CONFIG_SYS_USE_NAND
 115 #undef CONFIG_ENV_IS_IN_FLASH
 116 #define CONFIG_SYS_NO_FLASH
 117 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 118 #define CONFIG_ENV_SECT_SIZE    512     /* Env sector Size */
 119 #define CONFIG_ENV_SIZE         SZ_16K
 120 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is loaded by a bootloader */
 121 #define CONFIG_SKIP_RELOCATE_UBOOT      /* to a proper address, init done */
 122 #define CONFIG_SYS_NAND_BASE            0x02000000
 123 #define CONFIG_SYS_NAND_HW_ECC
 124 #define CONFIG_SYS_MAX_NAND_DEVICE      1       /* Max number of NAND devices */
 125 #define NAND_MAX_CHIPS          1
 126 #define CONFIG_ENV_OFFSET               0x0     /* Block 0--not used by bootcode */
 127 #define DEF_BOOTM               ""
 128 #elif defined(CONFIG_SYS_USE_NOR)
 129 #ifdef CONFIG_NOR_UART_BOOT
 130 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is loaded by a bootloader */
 131 #define CONFIG_SKIP_RELOCATE_UBOOT      /* to a proper address, init done */
 132 #else
 133 #undef CONFIG_SKIP_LOWLEVEL_INIT
 134 #undef CONFIG_SKIP_RELOCATE_UBOOT
 135 #endif
 136 #define CONFIG_ENV_IS_IN_FLASH
 137 #undef CONFIG_SYS_NO_FLASH
 138 #define CONFIG_FLASH_CFI_DRIVER
 139 #define CONFIG_SYS_FLASH_CFI
 140 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* max number of flash banks */
 141 #define CONFIG_SYS_FLASH_SECT_SZ        0x20000         /* 128KB sect size AMD Flash */
 142 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_FLASH_SECT_SZ*2)
 143 #define PHYS_FLASH_1            0x02000000      /* CS2 Base address      */
 144 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1    /* Flash Base for U-Boot */
 145 #define PHYS_FLASH_SIZE         0x2000000       /* Flash size 32MB       */
 146 #define CONFIG_SYS_MAX_FLASH_SECT       (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
 147 #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_FLASH_SECT_SZ        /* Env sector Size */
 148 #endif
 149 /*==============================*/
 150 /* U-Boot general configuration */
 151 /*==============================*/
 152 #undef  CONFIG_USE_IRQ                  /* No IRQ/FIQ in U-Boot */
 153 #define CONFIG_MISC_INIT_R
 154 #undef CONFIG_BOOTDELAY
 155 #define CONFIG_BOOTFILE         "uImage"        /* Boot file name */
 156 #define CONFIG_SYS_PROMPT               "U-Boot > "     /* Monitor Command Prompt */
 157 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size  */
 158 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print buffer sz */
 159 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 160 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 161 #define CONFIG_SYS_LOAD_ADDR            0x80700000      /* default Linux kernel load address */
 162 #define CONFIG_VERSION_VARIABLE
 163 #define CONFIG_AUTO_COMPLETE            /* Won't work with hush so far, may be later */
 164 #define CONFIG_SYS_HUSH_PARSER
 165 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 166 #define CONFIG_CMDLINE_EDITING
 167 #define CONFIG_SYS_LONGHELP
 168 #define CONFIG_CRC32_VERIFY
 169 #define CONFIG_MX_CYCLIC
 170 /*===================*/
 171 /* Linux Information */
 172 /*===================*/
 173 #define LINUX_BOOT_PARAM_ADDR   0x80000100
 174 #define CONFIG_CMDLINE_TAG
 175 #define CONFIG_SETUP_MEMORY_TAGS
 176 #define CONFIG_BOOTARGS         "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
 177 #define CONFIG_BOOTCOMMAND      "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000"
 178 /*=================*/
 179 /* U-Boot commands */
 180 /*=================*/
 181 #include <config_cmd_default.h>
 182 #define CONFIG_CMD_ASKENV
 183 #define CONFIG_CMD_DHCP
 184 #define CONFIG_CMD_DIAG
 185 #define CONFIG_CMD_I2C
 186 #define CONFIG_CMD_MII
 187 #define CONFIG_CMD_PING
 188 #define CONFIG_CMD_SAVES
 189 #define CONFIG_CMD_EEPROM
 190 #undef CONFIG_CMD_BDI
 191 #undef CONFIG_CMD_FPGA
 192 #undef CONFIG_CMD_SETGETDCR
 193 #ifdef CONFIG_SYS_USE_NAND
 194 #undef CONFIG_CMD_FLASH
 195 #undef CONFIG_CMD_IMLS
 196 #define CONFIG_CMD_NAND
 197 #elif defined(CONFIG_SYS_USE_NOR)
 198 #define CONFIG_CMD_JFFS2
 199 #else
 200 #error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
 201 #endif
 202 /*=======================*/
 203 /* KGDB support (if any) */
 204 /*=======================*/
 205 #ifdef CONFIG_CMD_KGDB
 206 #define CONFIG_KGDB_BAUDRATE    115200  /* speed to run kgdb serial port */
 207 #define CONFIG_KGDB_SER_INDEX   1       /* which serial port to use */
 208 #endif
 209 #endif /* __CONFIG_H */