include/configs/db-88f6820-gp.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_88F6820_GP_H
   8 #define _CONFIG_DB_88F6820_GP_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_DB_88F6820_GP            /* Board target name for DDR training */
  14
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16
  17 /*
  18  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  19  * for DDR ECC byte filling in the SPL before loading the main
  20  * U-Boot into it.
  21  */
  22 #define CONFIG_SYS_TEXT_BASE    0x00800000
  23 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  24
  25 /*
  26  * Commands configuration
  27  */
  28 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  29 #define CONFIG_CMD_CACHE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_ENV
  32 #define CONFIG_CMD_EXT2
  33 #define CONFIG_CMD_EXT4
  34 #define CONFIG_CMD_FAT
  35 #define CONFIG_CMD_FS_GENERIC
  36 #define CONFIG_CMD_I2C
  37 #define CONFIG_CMD_MMC
  38 #define CONFIG_CMD_PCI
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_SCSI
  41 #define CONFIG_CMD_SF
  42 #define CONFIG_CMD_SPI
  43 #define CONFIG_CMD_TFTPPUT
  44 #define CONFIG_CMD_TIME
  45
  46 /* I2C */
  47 #define CONFIG_SYS_I2C
  48 #define CONFIG_SYS_I2C_MVTWSI
  49 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  50 #define CONFIG_SYS_I2C_SLAVE            0x0
  51 #define CONFIG_SYS_I2C_SPEED            100000
  52
  53 /* SPI NOR flash default params, used by sf commands */
  54 #define CONFIG_SF_DEFAULT_SPEED         1000000
  55 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  56
  57 /*
  58  * SDIO/MMC Card Configuration
  59  */
  60 #define CONFIG_MMC
  61 #define CONFIG_MMC_SDMA
  62 #define CONFIG_GENERIC_MMC
  63 #define CONFIG_SDHCI
  64 #define CONFIG_MV_SDHCI
  65 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  66
  67 /*
  68  * SATA/SCSI/AHCI configuration
  69  */
  70 #define CONFIG_LIBATA
  71 #define CONFIG_SCSI_AHCI
  72 #define CONFIG_SCSI_AHCI_PLAT
  73 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  74 #define CONFIG_SYS_SCSI_MAX_LUN         1
  75 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  76                                          CONFIG_SYS_SCSI_MAX_LUN)
  77
  78 /* Partition support */
  79 #define CONFIG_DOS_PARTITION
  80 #define CONFIG_EFI_PARTITION
  81
  82 /* Additional FS support/configuration */
  83 #define CONFIG_SUPPORT_VFAT
  84
  85 /* USB/EHCI configuration */
  86 #define CONFIG_EHCI_IS_TDI
  87
  88 /* Environment in SPI NOR flash */
  89 #define CONFIG_ENV_IS_IN_SPI_FLASH
  90 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  91 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  92 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  93
  94 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  95 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  96
  97 /* PCIe support */
  98 #ifndef CONFIG_SPL_BUILD
  99 #define CONFIG_PCI
 100 #define CONFIG_PCI_MVEBU
 101 #define CONFIG_PCI_PNP
 102 #define CONFIG_PCI_SCAN_SHOW
 103 #endif
 104
 105 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
 106 #define CONFIG_SYS_ALT_MEMTEST
 107
 108 /* Keep device tree and initrd in lower memory so the kernel can access them */
 109 #define CONFIG_EXTRA_ENV_SETTINGS       \
 110         "fdt_high=0x10000000\0"         \
 111         "initrd_high=0x10000000\0"
 112
 113 /* SPL */
 114 /*
 115  * Select the boot device here
 116  *
 117  * Currently supported are:
 118  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
 119  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
 120  */
 121 #define SPL_BOOT_SPI_NOR_FLASH          1
 122 #define SPL_BOOT_SDIO_MMC_CARD          2
 123 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
 124
 125 /* Defines for SPL */
 126 #define CONFIG_SPL_FRAMEWORK
 127 #define CONFIG_SPL_SIZE                 (140 << 10)
 128 #define CONFIG_SPL_TEXT_BASE            0x40000030
 129 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x0030)
 130
 131 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 132 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 133
 134 #ifdef CONFIG_SPL_BUILD
 135 #define CONFIG_SYS_MALLOC_SIMPLE
 136 #endif
 137
 138 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 139 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 140
 141 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 142 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 143 #define CONFIG_SPL_SERIAL_SUPPORT
 144 #define CONFIG_SPL_I2C_SUPPORT
 145
 146 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 147 /* SPL related SPI defines */
 148 #define CONFIG_SPL_SPI_SUPPORT
 149 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 150 #define CONFIG_SPL_SPI_LOAD
 151 #define CONFIG_SPL_SPI_BUS              0
 152 #define CONFIG_SPL_SPI_CS               0
 153 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x24000
 154 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 155 #endif
 156
 157 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 158 /* SPL related MMC defines */
 159 #define CONFIG_SPL_MMC_SUPPORT
 160 #define CONFIG_SPL_LIBDISK_SUPPORT
 161 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 162 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (160 << 10)
 163 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 164 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 165 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      ((512 << 10) / 512) /* 512KiB */
 166 #ifdef CONFIG_SPL_BUILD
 167 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 168 #endif
 169 #endif
 170
 171 /*
 172  * mv-common.h should be defined after CMD configs since it used them
 173  * to enable certain macros
 174  */
 175 #include "mv-common.h"
 176
 177 #endif /* _CONFIG_DB_88F6820_GP_H */