include/configs/eb_cpu5282.h

   1 /*
   2  * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
   3  *
   4  * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #ifndef _CONFIG_EB_CPU5282_H_
  26 #define _CONFIG_EB_CPU5282_H_
  27
  28 #undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
  29
  30 /*----------------------------------------------------------------------*
  31  * High Level Configuration Options (easy to change)                    *
  32  *----------------------------------------------------------------------*/
  33
  34 #define CONFIG_MCF52x2                  /* define processor family */
  35 #define CONFIG_M5282                    /* define processor type */
  36
  37 #define CONFIG_MISC_INIT_R
  38
  39 #define CONFIG_MCFUART
  40 #define CONFIG_SYS_UART_PORT            (0)
  41 #define CONFIG_BAUDRATE                 115200
  42
  43 #undef  CONFIG_MONITOR_IS_IN_RAM                /* starts uboot direct */
  44
  45 #define CONFIG_BOOTCOMMAND "printenv"
  46
  47 /*----------------------------------------------------------------------*
  48  * Options                                                              *
  49  *----------------------------------------------------------------------*/
  50
  51 #define CONFIG_BOOT_RETRY_TIME  -1
  52 #define CONFIG_RESET_TO_RETRY
  53 #define CONFIG_SPLASH_SCREEN
  54
  55 #define CONFIG_HW_WATCHDOG
  56
  57 #define CONFIG_STATUS_LED
  58 #define CONFIG_BOARD_SPECIFIC_LED
  59 #define STATUS_LED_ACTIVE               0
  60 #define STATUS_LED_BIT                  0x0008  /* Timer7 GPIO */
  61 #define STATUS_LED_BOOT                 0
  62 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  63 #define STATUS_LED_STATE                STATUS_LED_OFF
  64
  65 /*----------------------------------------------------------------------*
  66  * Configuration for environment                                        *
  67  * Environment is in the second sector of the first 256k of flash       *
  68  *----------------------------------------------------------------------*/
  69
  70 #define CONFIG_ENV_ADDR         0xFF040000
  71 #define CONFIG_ENV_SECT_SIZE    0x00020000
  72 #define CONFIG_ENV_IS_IN_FLASH  1
  73
  74 /*
  75  * BOOTP options
  76  */
  77 #define CONFIG_BOOTP_BOOTFILESIZE
  78 #define CONFIG_BOOTP_BOOTPATH
  79 #define CONFIG_BOOTP_GATEWAY
  80 #define CONFIG_BOOTP_HOSTNAME
  81
  82 /*
  83  * Command line configuration.
  84  */
  85 #define CONFIG_CMDLINE_EDITING
  86 #include <config_cmd_default.h>
  87
  88 #undef CONFIG_CMD_LOADB
  89 #define CONFIG_CMD_DATE
  90 #define CONFIG_CMD_DHCP
  91 #define CONFIG_CMD_I2C
  92 #define CONFIG_CMD_LED
  93 #define CONFIG_CMD_MII
  94 #define CONFIG_CMD_NET
  95
  96 #define CONFIG_MCFTMR
  97
  98 #define CONFIG_BOOTDELAY        5
  99 #define CONFIG_SYS_PROMPT       "\nEB+CPU5282> "
 100 #define CONFIG_SYS_LONGHELP     1
 101
 102 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size      */
 103 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 104 #define CONFIG_SYS_MAXARGS      16      /* max number of command args   */
 105 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 106
 107 #define CONFIG_SYS_LOAD_ADDR            0x20000
 108
 109 #define CONFIG_SYS_MEMTEST_START        0x100000
 110 #define CONFIG_SYS_MEMTEST_END          0x400000
 111 /*#define CONFIG_SYS_DRAM_TEST          1 */
 112 #undef CONFIG_SYS_DRAM_TEST
 113
 114 /*----------------------------------------------------------------------*
 115  * Clock and PLL Configuration                                          *
 116  *----------------------------------------------------------------------*/
 117 #define CONFIG_SYS_HZ                   1000
 118 #define CONFIG_SYS_CLK                  80000000      /* 8MHz * 8 */
 119
 120 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
 121
 122 #define CONFIG_SYS_MFD          0x02    /* PLL Multiplication Factor Devider */
 123 #define CONFIG_SYS_RFD          0x00    /* PLL Reduce Frecuency Devider */
 124
 125 /*----------------------------------------------------------------------*
 126  * Network                                                              *
 127  *----------------------------------------------------------------------*/
 128
 129 #define CONFIG_MCFFEC
 130 #define CONFIG_MII                      1
 131 #define CONFIG_MII_INIT                 1
 132 #define CONFIG_SYS_DISCOVER_PHY
 133 #define CONFIG_SYS_RX_ETH_BUFFER        8
 134 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 135
 136 #define CONFIG_SYS_FEC0_PINMUX          0
 137 #define CONFIG_SYS_FEC0_MIIBASE         CONFIG_SYS_FEC0_IOBASE
 138 #define MCFFEC_TOUT_LOOP                50000
 139
 140 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 141
 142 /*-------------------------------------------------------------------------
 143  * Low Level Configuration Settings
 144  * (address mappings, register initial values, etc.)
 145  * You should know what you are doing if you make changes here.
 146  *-----------------------------------------------------------------------*/
 147
 148 #define CONFIG_SYS_MBAR                 0x40000000
 149
 150 /*-----------------------------------------------------------------------
 151  * Definitions for initial stack pointer and data area (in DPRAM)
 152  *-----------------------------------------------------------------------*/
 153
 154 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 155 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 156 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 157         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 158 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 159
 160 /*-----------------------------------------------------------------------
 161  * Start addresses for the final memory configuration
 162  * (Set up by the startup code)
 163  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 164  */
 165 #define CONFIG_SYS_SDRAM_BASE0          0x00000000
 166 #define CONFIG_SYS_SDRAM_SIZE0          16      /* SDRAM size in MB */
 167
 168 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_SDRAM_BASE0
 169 #define CONFIG_SYS_SDRAM_SIZE           CONFIG_SYS_SDRAM_SIZE0
 170
 171 #define CONFIG_SYS_MONITOR_LEN          0x20000
 172 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 173 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 174
 175 /*
 176  * For booting Linux, the board info and command line data
 177  * have to be in the first 8 MB of memory, since this is
 178  * the maximum mapped by the Linux kernel during initialization ??
 179  */
 180 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20) /* Initial Memory map for Linux */
 181
 182 /*-----------------------------------------------------------------------
 183  * FLASH organization
 184  */
 185 #define CONFIG_FLASH_SHOW_PROGRESS      45
 186
 187 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 188 #define CONFIG_SYS_INT_FLASH_BASE       0xF0000000
 189 #define CONFIG_SYS_INT_FLASH_ENABLE     0x21
 190
 191 #define CONFIG_SYS_MAX_FLASH_SECT       128
 192 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 193 #define CONFIG_SYS_FLASH_ERASE_TOUT     10000000
 194 #define CONFIG_SYS_FLASH_PROTECTION
 195
 196 #define CONFIG_SYS_FLASH_CFI
 197 #define CONFIG_FLASH_CFI_DRIVER
 198 #define CONFIG_SYS_FLASH_SIZE           16*1024*1024
 199 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 200
 201 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 202
 203 /*-----------------------------------------------------------------------
 204  * Cache Configuration
 205  */
 206 #define CONFIG_SYS_CACHELINE_SIZE       16
 207
 208 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 209                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 210 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 211                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 212 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV + CF_CACR_DCM)
 213 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 214                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 215                                          CF_ACR_EN | CF_ACR_SM_ALL)
 216 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_DISD | \
 217                                          CF_CACR_CEIB | CF_CACR_DBWE | \
 218                                          CF_CACR_EUSP)
 219
 220 /*-----------------------------------------------------------------------
 221  * Memory bank definitions
 222  */
 223
 224 #define CONFIG_SYS_CS0_BASE             0xFF000000
 225 #define CONFIG_SYS_CS0_CTRL             0x00001980
 226 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 227
 228 #define CONFIG_SYS_CS2_BASE             0xE0000000
 229 #define CONFIG_SYS_CS2_CTRL             0x00001980
 230 #define CONFIG_SYS_CS2_MASK             0x000F0001
 231
 232 #define CONFIG_SYS_CS3_BASE             0xE0100000
 233 #define CONFIG_SYS_CS3_CTRL             0x00001980
 234 #define CONFIG_SYS_CS3_MASK             0x000F0001
 235
 236 /*-----------------------------------------------------------------------
 237  * Port configuration
 238  */
 239 #define CONFIG_SYS_PACNT                0x0000000       /* Port A D[31:24] */
 240 #define CONFIG_SYS_PADDR                0x0000000
 241 #define CONFIG_SYS_PADAT                0x0000000
 242
 243 #define CONFIG_SYS_PBCNT                0x0000000       /* Port B D[23:16] */
 244 #define CONFIG_SYS_PBDDR                0x0000000
 245 #define CONFIG_SYS_PBDAT                0x0000000
 246
 247 #define CONFIG_SYS_PCCNT                0x0000000       /* Port C D[15:08] */
 248 #define CONFIG_SYS_PCDDR                0x0000000
 249 #define CONFIG_SYS_PCDAT                0x0000000
 250
 251 #define CONFIG_SYS_PDCNT                0x0000000       /* Port D D[07:00] */
 252 #define CONFIG_SYS_PCDDR                0x0000000
 253 #define CONFIG_SYS_PCDAT                0x0000000
 254
 255 #define CONFIG_SYS_PASPAR               0x0F0F
 256 #define CONFIG_SYS_PEHLPAR              0xC0
 257 #define CONFIG_SYS_PUAPAR               0x0F
 258 #define CONFIG_SYS_DDRUA                0x05
 259 #define CONFIG_SYS_PJPAR                0xFF
 260
 261 /*-----------------------------------------------------------------------
 262  * I2C
 263  */
 264
 265 #define CONFIG_HARD_I2C
 266 #define CONFIG_FSL_I2C
 267
 268 #define CONFIG_SYS_I2C_OFFSET           0x00000300
 269 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 270
 271 #define CONFIG_SYS_I2C_SPEED            100000
 272 #define CONFIG_SYS_I2C_SLAVE            0
 273
 274 #ifdef CONFIG_CMD_DATE
 275 #define CONFIG_RTC_DS1338
 276 #define CONFIG_I2C_RTC_ADDR             0x68
 277 #endif
 278
 279 /*-----------------------------------------------------------------------
 280  * VIDEO configuration
 281  */
 282
 283 #define CONFIG_VIDEO
 284
 285 #ifdef CONFIG_VIDEO
 286 #define CONFIG_VIDEO_VCXK                       1
 287
 288 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN       2
 289 #define CONFIG_SYS_VCXK_DOUBLEBUFFERED          1
 290 #define CONFIG_SYS_VCXK_BASE                    CONFIG_SYS_CS2_BASE
 291
 292 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT        MCFGPTB_GPTPORT
 293 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR         MCFGPTB_GPTDDR
 294 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN         0x0001
 295
 296 #define CONFIG_SYS_VCXK_ENABLE_PORT             MCFGPTB_GPTPORT
 297 #define CONFIG_SYS_VCXK_ENABLE_DDR              MCFGPTB_GPTDDR
 298 #define CONFIG_SYS_VCXK_ENABLE_PIN              0x0002
 299
 300 #define CONFIG_SYS_VCXK_REQUEST_PORT            MCFGPTB_GPTPORT
 301 #define CONFIG_SYS_VCXK_REQUEST_DDR             MCFGPTB_GPTDDR
 302 #define CONFIG_SYS_VCXK_REQUEST_PIN             0x0004
 303
 304 #define CONFIG_SYS_VCXK_INVERT_PORT             MCFGPIO_PORTE
 305 #define CONFIG_SYS_VCXK_INVERT_DDR              MCFGPIO_DDRE
 306 #define CONFIG_SYS_VCXK_INVERT_PIN              MCFGPIO_PORT2
 307
 308 #endif /* CONFIG_VIDEO */
 309 #endif  /* _CONFIG_M5282EVB_H */
 310 /*---------------------------------------------------------------------*/