include/configs/ethernut5.h

   1 /*
   2  * (C) Copyright 2011
   3  * egnite GmbH <info@egnite.de>
   4  *
   5  * Configuation settings for Ethernut 5 with AT91SAM9XE.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <asm/hardware.h>
  14
  15 #define CONFIG_SYS_GENERIC_BOARD
  16
  17 /* The first stage boot loader expects u-boot running at this address. */
  18 #define CONFIG_SYS_TEXT_BASE    0x27000000      /* 16MB available */
  19
  20 /* The first stage boot loader takes care of low level initialization. */
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 /* Set our official architecture number. */
  24 #define MACH_TYPE_ETHERNUT5 1971
  25 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
  26
  27 /* CPU information */
  28 #define CONFIG_DISPLAY_CPUINFO          /* Display at console. */
  29 #define CONFIG_ARCH_CPU_INIT
  30
  31 /* ARM asynchronous clock */
  32 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768   /* slow clock xtal */
  33 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000 /* 18.432 MHz crystal */
  34
  35 /* 32kB internal SRAM */
  36 #define CONFIG_SRAM_BASE        0x00300000 /*AT91SAM9XE_SRAM_BASE */
  37 #define CONFIG_SRAM_SIZE        (32 << 10)
  38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \
  39                                 GENERATED_GBL_DATA_SIZE)
  40
  41 /* 128MB SDRAM in 1 bank */
  42 #define CONFIG_NR_DRAM_BANKS            1
  43 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  44 #define CONFIG_SYS_SDRAM_SIZE           (128 << 20)
  45 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
  46 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
  47 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (1 << 20))
  48 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  49 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE \
  50                                         - CONFIG_SYS_MALLOC_LEN)
  51
  52 /* 512kB on-chip NOR flash */
  53 # define CONFIG_SYS_MAX_FLASH_BANKS     1
  54 # define CONFIG_SYS_FLASH_BASE          0x00200000 /* AT91SAM9XE_FLASH_BASE */
  55 # define CONFIG_AT91_EFLASH
  56 # define CONFIG_SYS_MAX_FLASH_SECT      32
  57 # define CONFIG_SYS_FLASH_PROTECTION    /* First stage loader in sector 0 */
  58 # define CONFIG_EFLASH_PROTSECTORS      1
  59
  60 /* 512kB DataFlash at NPCS0 */
  61 #define CONFIG_SYS_MAX_DATAFLASH_BANKS  1
  62 #define CONFIG_HAS_DATAFLASH
  63 #define CONFIG_SPI_FLASH_ATMEL
  64 #define CONFIG_ATMEL_DATAFLASH_SPI
  65 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000
  66 #define DATAFLASH_TCSS                  (0x1a << 16)
  67 #define DATAFLASH_TCHS                  (0x1 << 24)
  68
  69 #define CONFIG_ENV_IS_IN_SPI_FLASH
  70 #define CONFIG_ENV_OFFSET               0x3DE000
  71 #define CONFIG_ENV_SECT_SIZE            (132 << 10)
  72 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
  73 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
  74                                         + CONFIG_ENV_OFFSET)
  75 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
  76                                         + 0x042000)
  77
  78 /* SPI */
  79 #define CONFIG_ATMEL_SPI
  80 #define AT91_SPI_CLK                    15000000
  81
  82 /* Serial port */
  83 #define CONFIG_ATMEL_USART
  84 #define CONFIG_USART3                   /* USART 3 is DBGU */
  85 #define CONFIG_BAUDRATE                 115200
  86 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  87 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  88
  89 /* Misc. hardware drivers */
  90 #define CONFIG_AT91_GPIO
  91
  92 /* Command line configuration */
  93 #define CONFIG_CMD_JFFS2
  94 #define CONFIG_CMD_MII
  95 #define CONFIG_CMD_MTDPARTS
  96 #define CONFIG_CMD_NAND
  97 #define CONFIG_CMD_SPI
  98
  99 #ifndef MINIMAL_LOADER
 100 #define CONFIG_CMD_ASKENV
 101 #define CONFIG_CMD_BSP
 102 #define CONFIG_CMD_CACHE
 103 #define CONFIG_CMD_CDP
 104 #define CONFIG_CMD_DATE
 105 #define CONFIG_CMD_DHCP
 106 #define CONFIG_CMD_DNS
 107 #define CONFIG_CMD_EXT2
 108 #define CONFIG_CMD_FAT
 109 #define CONFIG_CMD_I2C
 110 #define CONFIG_CMD_MMC
 111 #define CONFIG_CMD_PING
 112 #define CONFIG_CMD_RARP
 113 #define CONFIG_CMD_REISER
 114 #define CONFIG_CMD_SAVES
 115 #define CONFIG_CMD_SF
 116 #define CONFIG_CMD_SNTP
 117 #define CONFIG_CMD_UBI
 118 #define CONFIG_CMD_UBIFS
 119 #define CONFIG_CMD_UNZIP
 120 #define CONFIG_CMD_USB
 121 #endif
 122
 123 /* NAND flash */
 124 #ifdef CONFIG_CMD_NAND
 125 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 126 #define CONFIG_SYS_NAND_BASE            0x40000000
 127 #define CONFIG_SYS_NAND_DBW_8
 128 #define CONFIG_NAND_ATMEL
 129 /* our ALE is AD21 */
 130 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 131 /* our CLE is AD22 */
 132 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 133 #define CONFIG_SYS_NAND_ENABLE_PIN      GPIO_PIN_PC(14)
 134 #endif
 135
 136 /* JFFS2 */
 137 #ifdef CONFIG_CMD_JFFS2
 138 #define CONFIG_JFFS2_CMDLINE
 139 #define CONFIG_JFFS2_NAND
 140 #endif
 141
 142 /* Ethernet */
 143 #define CONFIG_NET_RETRY_COUNT          20
 144 #define CONFIG_MACB
 145 #define CONFIG_RMII
 146 #define CONFIG_PHY_ID                   0
 147 #define CONFIG_MACB_SEARCH_PHY
 148
 149 /* MMC */
 150 #ifdef CONFIG_CMD_MMC
 151 #define CONFIG_MMC
 152 #define CONFIG_GENERIC_MMC
 153 #define CONFIG_GENERIC_ATMEL_MCI
 154 #define CONFIG_SYS_MMC_CD_PIN           AT91_PIO_PORTC, 8
 155 #endif
 156
 157 /* USB */
 158 #ifdef CONFIG_CMD_USB
 159 #define CONFIG_USB_ATMEL
 160 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 161 #define CONFIG_USB_OHCI_NEW
 162 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 163 #define CONFIG_SYS_USB_OHCI_REGS_BASE   0x00500000
 164 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "host"
 165 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 166 #define CONFIG_USB_STORAGE
 167 #endif
 168
 169 /* RTC */
 170 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
 171 #define CONFIG_RTC_PCF8563
 172 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 173 #endif
 174
 175 /* I2C */
 176 #define CONFIG_SYS_MAX_I2C_BUS  1
 177
 178 #define CONFIG_SYS_I2C
 179 #define CONFIG_SYS_I2C_SOFT                     /* I2C bit-banged */
 180 #define CONFIG_SYS_I2C_SOFT_SPEED       100000
 181 #define CONFIG_SYS_I2C_SOFT_SLAVE       0
 182
 183 #define I2C_SOFT_DECLARATIONS
 184
 185 #define GPIO_I2C_SCL            AT91_PIO_PORTA, 24
 186 #define GPIO_I2C_SDA            AT91_PIO_PORTA, 23
 187
 188 #define I2C_INIT { \
 189         at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \
 190         at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
 191         at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \
 192         at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \
 193         at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
 194 }
 195
 196 #define I2C_ACTIVE      at91_set_pio_output(AT91_PIO_PORTA, 23, 0)
 197 #define I2C_TRISTATE    at91_set_pio_input(AT91_PIO_PORTA, 23, 0)
 198 #define I2C_SCL(bit)    at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
 199 #define I2C_SDA(bit)    at91_set_pio_value(AT91_PIO_PORTA, 23, bit)
 200 #define I2C_DELAY       udelay(100)
 201 #define I2C_READ        at91_get_pio_value(AT91_PIO_PORTA, 23)
 202
 203 /* DHCP/BOOTP options */
 204 #ifdef CONFIG_CMD_DHCP
 205 #define CONFIG_BOOTP_BOOTFILESIZE
 206 #define CONFIG_BOOTP_BOOTPATH
 207 #define CONFIG_BOOTP_GATEWAY
 208 #define CONFIG_BOOTP_HOSTNAME
 209 #define CONFIG_SYS_AUTOLOAD     "n"
 210 #endif
 211
 212 /* File systems */
 213 #define CONFIG_MTD_DEVICE
 214 #define CONFIG_MTD_PARTITIONS
 215 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND)
 216 #define MTDIDS_DEFAULT          "nand0=atmel_nand"
 217 #define MTDPARTS_DEFAULT        "mtdparts=atmel_nand:-(root)"
 218 #endif
 219 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
 220         defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
 221 #define CONFIG_DOS_PARTITION
 222 #endif
 223 #define CONFIG_LZO
 224 #define CONFIG_RBTREE
 225
 226 /* Boot command */
 227 #define CONFIG_BOOTDELAY        3
 228 #define CONFIG_CMDLINE_TAG
 229 #define CONFIG_SETUP_MEMORY_TAGS
 230 #define CONFIG_INITRD_TAG
 231 #define CONFIG_BOOTCOMMAND      "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm"
 232 #if defined(CONFIG_CMD_NAND)
 233 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 234                                 "root=/dev/mtdblock0 " \
 235                                 MTDPARTS_DEFAULT \
 236                                 " rw rootfstype=jffs2"
 237 #endif
 238
 239 /* Misc. u-boot settings */
 240 #define CONFIG_SYS_HUSH_PARSER
 241 #define CONFIG_SYS_CBSIZE               256
 242 #define CONFIG_SYS_MAXARGS              16
 243 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + 16 \
 244                                         + sizeof(CONFIG_SYS_PROMPT))
 245 #define CONFIG_SYS_LONGHELP
 246 #define CONFIG_CMDLINE_EDITING
 247
 248 #endif