]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/goflexhome.h
configs: Re-sync with cmd/Kconfig
[people/ms/u-boot.git] / include / configs / goflexhome.h
1 /*
2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
3 *
4 * Based on dockstar.h originally written by
5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
6 *
7 * Based on sheevaplug.h originally written by
8 * Prafulla Wadaskar <prafulla@marvell.com>
9 * (C) Copyright 2009
10 * Marvell Semiconductor <www.marvell.com>
11 *
12 * SPDX-License-Identifier: GPL-2.0+
13 */
14
15 #ifndef _CONFIG_GOFLEXHOME_H
16 #define _CONFIG_GOFLEXHOME_H
17
18 /*
19 * Version number information
20 */
21 #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
22
23 /*
24 * High Level Configuration Options (easy to change)
25 */
26 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
27 #define CONFIG_KW88F6281 1 /* SOC Name */
28 #define CONFIG_MACH_GOFLEXHOME /* Machine type */
29 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
30
31 /*
32 * Default GPIO configuration and LED status
33 */
34 #define GOFLEXHOME_OE_LOW (~(0))
35 #define GOFLEXHOME_OE_HIGH (~(0))
36 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
37 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
38
39 /* PHY related */
40 #define MV88E1116_LED_FCTRL_REG 10
41 #define MV88E1116_CPRSP_CR3_REG 21
42 #define MV88E1116_MAC_CTRL_REG 21
43 #define MV88E1116_PGADR_REG 22
44 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
45 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
46
47 /*
48 * Commands configuration
49 */
50 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
51 #define CONFIG_CONSOLE_MUX
52 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
53
54 #define CONFIG_CMD_ENV
55 #define CONFIG_CMD_NAND
56 #define CONFIG_CMD_IDE
57 #define CONFIG_CMD_DATE
58 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
59
60 /*
61 * mv-common.h should be defined after CMD configs since it used them
62 * to enable certain macros
63 */
64 #include "mv-common.h"
65
66 /*
67 * Environment variables configurations
68 */
69 #ifdef CONFIG_CMD_NAND
70 #define CONFIG_ENV_IS_IN_NAND 1
71 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
72 #else
73 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
74 #endif
75 /*
76 * max 4k env size is enough, but in case of nand
77 * it has to be rounded to sector size
78 */
79 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
80 #define CONFIG_ENV_ADDR 0xC0000
81 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
82
83 /*
84 * Default environment variables
85 */
86 #define CONFIG_BOOTCOMMAND \
87 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
88 "ubi part root; " \
89 "ubifsmount ubi:root; " \
90 "ubifsload 0x800000 ${kernel}; " \
91 "bootm 0x800000"
92
93 #define CONFIG_MTDPARTS \
94 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
95
96 #define CONFIG_EXTRA_ENV_SETTINGS \
97 "console=console=ttyS0,115200\0" \
98 "mtdids=nand0=orion_nand\0" \
99 "mtdparts="CONFIG_MTDPARTS \
100 "kernel=/boot/uImage\0" \
101 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
102
103 /*
104 * Ethernet Driver configuration
105 */
106 #ifdef CONFIG_CMD_NET
107 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
108 #define CONFIG_PHY_BASE_ADR 0
109 #endif /* CONFIG_CMD_NET */
110
111 /*
112 * * SATA Driver configuration
113 * */
114 #ifdef CONFIG_MVSATA_IDE
115 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
116 #endif /*CONFIG_MVSATA_IDE*/
117
118 /*
119 * * RTC driver configuration
120 * */
121 #ifdef CONFIG_CMD_DATE
122 #define CONFIG_RTC_MV
123 #endif /* CONFIG_CMD_DATE */
124
125 #endif /* _CONFIG_GOFLEXHOME_H */