]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/goflexhome.h
configs: Re-sync almost all of cmd/Kconfig
[people/ms/u-boot.git] / include / configs / goflexhome.h
1 /*
2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
3 *
4 * Based on dockstar.h originally written by
5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
6 *
7 * Based on sheevaplug.h originally written by
8 * Prafulla Wadaskar <prafulla@marvell.com>
9 * (C) Copyright 2009
10 * Marvell Semiconductor <www.marvell.com>
11 *
12 * SPDX-License-Identifier: GPL-2.0+
13 */
14
15 #ifndef _CONFIG_GOFLEXHOME_H
16 #define _CONFIG_GOFLEXHOME_H
17
18
19 /*
20 * Version number information
21 */
22 #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
23
24 /*
25 * High Level Configuration Options (easy to change)
26 */
27 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
28 #define CONFIG_KW88F6281 1 /* SOC Name */
29 #define CONFIG_MACH_GOFLEXHOME /* Machine type */
30 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
31
32 /*
33 * Default GPIO configuration and LED status
34 */
35 #define GOFLEXHOME_OE_LOW (~(0))
36 #define GOFLEXHOME_OE_HIGH (~(0))
37 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
38 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
39
40 /* PHY related */
41 #define MV88E1116_LED_FCTRL_REG 10
42 #define MV88E1116_CPRSP_CR3_REG 21
43 #define MV88E1116_MAC_CTRL_REG 21
44 #define MV88E1116_PGADR_REG 22
45 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
46 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
47
48 /*
49 * Commands configuration
50 */
51 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
52 #define CONFIG_CONSOLE_MUX
53 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
54
55 #define CONFIG_CMD_ENV
56 #define CONFIG_CMD_MII
57 #define CONFIG_CMD_NAND
58 #define CONFIG_CMD_IDE
59 #define CONFIG_CMD_DATE
60 #define CONFIG_CMD_EXT4
61 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
62
63 /*
64 * mv-common.h should be defined after CMD configs since it used them
65 * to enable certain macros
66 */
67 #include "mv-common.h"
68
69 /*
70 * Environment variables configurations
71 */
72 #ifdef CONFIG_CMD_NAND
73 #define CONFIG_ENV_IS_IN_NAND 1
74 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
75 #else
76 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
77 #endif
78 /*
79 * max 4k env size is enough, but in case of nand
80 * it has to be rounded to sector size
81 */
82 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
83 #define CONFIG_ENV_ADDR 0xC0000
84 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
85
86 /*
87 * Default environment variables
88 */
89 #define CONFIG_BOOTCOMMAND \
90 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
91 "ubi part root; " \
92 "ubifsmount ubi:root; " \
93 "ubifsload 0x800000 ${kernel}; " \
94 "bootm 0x800000"
95
96 #define CONFIG_MTDPARTS \
97 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
98
99 #define CONFIG_EXTRA_ENV_SETTINGS \
100 "console=console=ttyS0,115200\0" \
101 "mtdids=nand0=orion_nand\0" \
102 "mtdparts="CONFIG_MTDPARTS \
103 "kernel=/boot/uImage\0" \
104 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
105
106 /*
107 * Ethernet Driver configuration
108 */
109 #ifdef CONFIG_CMD_NET
110 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
111 #define CONFIG_PHY_BASE_ADR 0
112 #endif /* CONFIG_CMD_NET */
113
114 /*
115 * * SATA Driver configuration
116 * */
117 #ifdef CONFIG_MVSATA_IDE
118 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
119 #endif /*CONFIG_MVSATA_IDE*/
120
121 /*
122 * * RTC driver configuration
123 * */
124 #ifdef CONFIG_CMD_DATE
125 #define CONFIG_RTC_MV
126 #endif /* CONFIG_CMD_DATE */
127
128 #endif /* _CONFIG_GOFLEXHOME_H */