include/configs/gplugd.h

   1 /*
   2  * (C) Copyright 2011
   3  * eInfochips Ltd. <www.einfochips.com>
   4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
   5  *
   6  * Based on Aspenite:
   7  * (C) Copyright 2010
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  * Contributor: Mahavir Jain <mjain@marvell.com>
  11  *
  12  * See file CREDITS for list of people who contributed to this
  13  * project.
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License as
  17  * published by the Free Software Foundation; either version 2 of
  18  * the License, or (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  28  * MA 02110-1301 USA
  29  */
  30
  31 #ifndef __CONFIG_GPLUGD_H
  32 #define __CONFIG_GPLUGD_H
  33
  34 /*
  35  * Version number information
  36  */
  37 #define CONFIG_IDENT_STRING     "\nMarvell-gplugD"
  38
  39 /*
  40  * High Level Configuration Options
  41  */
  42 #define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  43 #define CONFIG_ARMADA100                1       /* SOC Family Name */
  44 #define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  45 #define CONFIG_MACH_SHEEVAD                     /* Machine type */
  46 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  47
  48 #define CONFIG_SYS_TEXT_BASE    0x00f00000
  49
  50 /*
  51  * There is no internal RAM in ARMADA100, using DRAM
  52  * TBD: dcache to be used for this
  53  */
  54 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  55 #define CONFIG_NR_DRAM_BANKS_MAX        2
  56
  57 /*
  58  * Commands configuration
  59  */
  60 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  61 #include <config_cmd_default.h>
  62 #define CONFIG_CMD_I2C
  63 #define CONFIG_CMD_AUTOSCRIPT
  64 #undef CONFIG_CMD_FPGA
  65
  66 /* Disable DCACHE */
  67 #define CONFIG_SYS_DCACHE_OFF
  68
  69 /* Network configuration */
  70 #ifdef CONFIG_CMD_NET
  71 #define CONFIG_CMD_PING
  72 #define CONFIG_NET_MULTI
  73 #define CONFIG_ARMADA100_FEC
  74
  75 /* DHCP Support */
  76 #define CONFIG_CMD_DHCP
  77 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  78 #endif /* CONFIG_CMD_NET */
  79
  80 /* GPIO Support */
  81 #define CONFIG_MARVELL_GPIO
  82
  83 /* PHY configuration */
  84 #define CONFIG_MII
  85 #define CONFIG_CMD_MII
  86 #define CONFIG_RESET_PHY_R
  87 /* 88E3015 register definition */
  88 #define PHY_LED_PAR_SEL_REG             22
  89 #define PHY_LED_MAN_REG                 25
  90 #define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  91 /* GPIO Configuration for PHY */
  92 #define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  93
  94 /*
  95  * mv-common.h should be defined after CMD configs since it used them
  96  * to enable certain macros
  97  */
  98 #include "mv-common.h"
  99 #undef CONFIG_ARCH_MISC_INIT
 100
 101 #ifdef CONFIG_SYS_NS16550_COM1
 102 #undef CONFIG_SYS_NS16550_COM1
 103 #endif /* CONFIG_SYS_NS16550_COM1 */
 104
 105 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
 106
 107 /*
 108  * Environment variables configurations
 109  */
 110 #define CONFIG_ENV_IS_NOWHERE   1       /* if env in SDRAM */
 111 #define CONFIG_ENV_SIZE 0x20000         /* 64k */
 112
 113 #endif  /* __CONFIG_GPLUGD_H */