include/configs/guruplug.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Siddarth Gore <gores@marvell.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  22  * MA 02110-1301 USA
  23  */
  24
  25 #ifndef _CONFIG_GURUPLUG_H
  26 #define _CONFIG_GURUPLUG_H
  27
  28 /*
  29  * Version number information
  30  */
  31 #define CONFIG_IDENT_STRING     "\nMarvell-GuruPlug"
  32
  33 /*
  34  * High Level Configuration Options (easy to change)
  35  */
  36 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  37 #define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  38 #define CONFIG_KW88F6281        1       /* SOC Name */
  39 #define CONFIG_MACH_GURUPLUG    /* Machine type */
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Commands configuration
  44  */
  45 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  46 #include <config_cmd_default.h>
  47 #define CONFIG_CMD_DHCP
  48 #define CONFIG_CMD_ENV
  49 #define CONFIG_CMD_FAT
  50 #define CONFIG_CMD_NAND
  51 #define CONFIG_CMD_PING
  52 #define CONFIG_CMD_USB
  53 #define CONFIG_CMD_IDE
  54
  55 /*
  56  * mv-common.h should be defined after CMD configs since it used them
  57  * to enable certain macros
  58  */
  59 #include "mv-common.h"
  60
  61 /*
  62  *  Environment variables configurations
  63  */
  64 #ifdef CONFIG_CMD_NAND
  65 #define CONFIG_ENV_IS_IN_NAND           1
  66 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  67 #else
  68 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  69 #endif
  70 /*
  71  * max 4k env size is enough, but in case of nand
  72  * it has to be rounded to sector size
  73  */
  74 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  75 #define CONFIG_ENV_ADDR                 0x40000
  76 #define CONFIG_ENV_OFFSET               0x40000 /* env starts here */
  77
  78 /*
  79  * Default environment variables
  80  */
  81 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  82         "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  83         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  84         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  85         "bootm 0x6400000;"
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS       \
  88         "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  89         "x_bootcmd_usb=usb start\0"     \
  90         "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
  91         "x_bootargs=console=ttyS0,115200\0"     \
  92         "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
  93
  94 /*
  95  * Ethernet Driver configuration
  96  */
  97 #ifdef CONFIG_CMD_NET
  98 #define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
  99 #define CONFIG_PHY_BASE_ADR     0
 100 #endif /* CONFIG_CMD_NET */
 101
 102 /*
 103  * SATA Driver configuration
 104  */
 105 #ifdef CONFIG_MVSATA_IDE
 106 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 107 #endif /*CONFIG_MVSATA_IDE*/
 108
 109 #define CONFIG_SYS_ALT_MEMTEST
 110
 111 #endif /* _CONFIG_GURUPLUG_H */