include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SPL_ENV_SUPPORT
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  23 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  24
  25 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  26 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  27 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  28
  29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  33
  34 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  35 #include "mx6_common.h"
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* Serial ATAG */
  40 #define CONFIG_SERIAL_TAG
  41
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  44
  45 /* Init Functions */
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48
  49 /* Driver Model */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_DM_GPIO
  52 #define CONFIG_DM_THERMAL
  53 #endif
  54
  55 /* GPIO */
  56 #define CONFIG_MXC_GPIO
  57
  58 /* Thermal */
  59 #define CONFIG_IMX_THERMAL
  60
  61 /* Serial */
  62 #define CONFIG_MXC_UART
  63 #define CONFIG_MXC_UART_BASE           UART2_BASE
  64
  65 #ifdef CONFIG_SPI_FLASH
  66
  67 /* SPI */
  68 #ifdef CONFIG_CMD_SF
  69   #define CONFIG_MXC_SPI
  70   #define CONFIG_SPI_FLASH_MTD
  71   #define CONFIG_SPI_FLASH_BAR
  72   #define CONFIG_SF_DEFAULT_BUS              0
  73   #define CONFIG_SF_DEFAULT_CS               0
  74                                              /* GPIO 3-19 (21248) */
  75   #define CONFIG_SF_DEFAULT_SPEED            30000000
  76   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  77 #endif
  78
  79 #else
  80 /* Enable NAND support */
  81 #define CONFIG_CMD_NAND
  82 #define CONFIG_CMD_NAND_TRIMFFS
  83 #ifdef CONFIG_CMD_NAND
  84   #define CONFIG_NAND_MXS
  85   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  86   #define CONFIG_SYS_NAND_BASE          0x40000000
  87   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  88   #define CONFIG_SYS_NAND_ONFI_DETECTION
  89
  90   /* DMA stuff, needed for GPMI/MXS NAND support */
  91   #define CONFIG_APBH_DMA
  92   #define CONFIG_APBH_DMA_BURST
  93   #define CONFIG_APBH_DMA_BURST8
  94 #endif
  95
  96 #endif /* CONFIG_SPI_FLASH */
  97
  98 /* I2C Configs */
  99 #define CONFIG_SYS_I2C
 100 #define CONFIG_SYS_I2C_MXC
 101 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 102 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 103 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 104 #define CONFIG_SYS_I2C_SPEED            100000
 105 #define CONFIG_I2C_GSC                  0
 106 #define CONFIG_I2C_PMIC                 1
 107 #define CONFIG_I2C_EDID
 108
 109 /* MMC Configs */
 110 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 111 #define CONFIG_SYS_FSL_USDHC_NUM       1
 112
 113 /* Filesystem support */
 114 #define CONFIG_CMD_UBIFS
 115
 116 /*
 117  * SATA Configs
 118  */
 119 #define CONFIG_CMD_SATA
 120 #ifdef CONFIG_CMD_SATA
 121   #define CONFIG_DWC_AHSATA
 122   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 123   #define CONFIG_DWC_AHSATA_PORT_ID     0
 124   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 125   #define CONFIG_LBA48
 126   #define CONFIG_LIBATA
 127 #endif
 128
 129 /*
 130  * PCI express
 131  */
 132 #define CONFIG_CMD_PCI
 133 #ifdef CONFIG_CMD_PCI
 134 #define CONFIG_PCI
 135 #define CONFIG_PCI_PNP
 136 #define CONFIG_PCI_SCAN_SHOW
 137 #define CONFIG_PCI_FIXUP_DEV
 138 #define CONFIG_PCIE_IMX
 139 #endif
 140
 141 /*
 142  * PMIC
 143  */
 144 #define CONFIG_POWER
 145 #define CONFIG_POWER_I2C
 146 #define CONFIG_POWER_PFUZE100
 147 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 148 #define CONFIG_POWER_LTC3676
 149 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 150
 151 /* Various command support */
 152 #define CONFIG_CMD_MII
 153 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 154 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 155 #define CONFIG_CMD_GSC
 156 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 157 #define CONFIG_CMD_UBI
 158 #define CONFIG_RBTREE
 159
 160 /* Ethernet support */
 161 #define CONFIG_FEC_MXC
 162 #define CONFIG_MII
 163 #define IMX_FEC_BASE             ENET_BASE_ADDR
 164 #define CONFIG_FEC_XCV_TYPE      RGMII
 165 #define CONFIG_FEC_MXC_PHYADDR   0
 166 #define CONFIG_PHYLIB
 167 #define CONFIG_ARP_TIMEOUT       200UL
 168
 169 /* USB Configs */
 170 #define CONFIG_USB_EHCI
 171 #define CONFIG_USB_EHCI_MX6
 172 #define CONFIG_USB_STORAGE
 173 #define CONFIG_USB_HOST_ETHER
 174 #define CONFIG_USB_ETHER_ASIX
 175 #define CONFIG_USB_ETHER_SMSC95XX
 176 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 177 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 178 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 179 #define CONFIG_MXC_USB_FLAGS      0
 180 #define CONFIG_USB_KEYBOARD
 181 #define CONFIG_USBD_HS
 182 #define CONFIG_USB_ETHER
 183 #define CONFIG_USB_ETH_CDC
 184 #define CONFIG_NETCONSOLE
 185 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 186
 187 /* USB Mass Storage Gadget */
 188 #define CONFIG_CMD_USB_MASS_STORAGE
 189 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 190
 191 /* Framebuffer and LCD */
 192 #define CONFIG_VIDEO
 193 #define CONFIG_VIDEO_IPUV3
 194 #define CONFIG_CFB_CONSOLE
 195 #define CONFIG_VGA_AS_SINGLE_DEVICE
 196 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 197 #define CONFIG_VIDEO_BMP_RLE8
 198 #define CONFIG_SPLASH_SCREEN
 199 #define CONFIG_BMP_16BPP
 200 #define CONFIG_VIDEO_LOGO
 201 #define CONFIG_IPUV3_CLK          260000000
 202 #define CONFIG_CMD_HDMIDETECT
 203 #define CONFIG_CONSOLE_MUX
 204 #define CONFIG_IMX_HDMI
 205 #define CONFIG_IMX_VIDEO_SKIP
 206
 207 /* Miscellaneous configurable options */
 208 #define CONFIG_HWCONFIG
 209
 210 /* Print Buffer Size */
 211 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 212
 213 /* Memory configuration */
 214 #define CONFIG_SYS_MEMTEST_START       0x10000000
 215 #define CONFIG_SYS_MEMTEST_END         0x10010000
 216 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 217
 218 /* Physical Memory Map */
 219 #define CONFIG_NR_DRAM_BANKS           1
 220 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 221 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 222 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 223 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 224
 225 #define CONFIG_SYS_INIT_SP_OFFSET \
 226         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 227 #define CONFIG_SYS_INIT_SP_ADDR \
 228         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 229
 230 /*
 231  * MTD Command for mtdparts
 232  */
 233 #define CONFIG_LZO
 234 #define CONFIG_CMD_MTDPARTS
 235 #define CONFIG_MTD_DEVICE
 236 #define CONFIG_MTD_PARTITIONS
 237 #ifdef CONFIG_SPI_FLASH
 238 #define MTDIDS_DEFAULT    "nor0=nor"
 239 #define MTDPARTS_DEFAULT  \
 240         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 241 #else
 242 #define MTDIDS_DEFAULT    "nand0=nand"
 243 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 244 #endif
 245
 246 /* Persistent Environment Config */
 247 #ifdef CONFIG_SPI_FLASH
 248 #define CONFIG_ENV_IS_IN_SPI_FLASH
 249 #else
 250 #define CONFIG_ENV_IS_IN_NAND
 251 #endif
 252 #if defined(CONFIG_ENV_IS_IN_MMC)
 253   #define CONFIG_SYS_MMC_ENV_DEV         0
 254   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 255   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 256   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 257 #elif defined(CONFIG_ENV_IS_IN_NAND)
 258   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 259   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 260   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 261   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 262   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 263 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 264   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 265   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 266   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 267   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 268   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 269   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 270   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 271 #endif
 272
 273 /* Environment */
 274 #define CONFIG_IPADDR             192.168.1.1
 275 #define CONFIG_SERVERIP           192.168.1.146
 276 #define HWCONFIG_DEFAULT \
 277         "hwconfig=rs232;" \
 278         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 279
 280 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 281         "usb_pgood_delay=2000\0" \
 282         "console=ttymxc1\0" \
 283         "bootdevs=usb mmc sata flash\0" \
 284         HWCONFIG_DEFAULT \
 285         "video=\0" \
 286         \
 287         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 288         "mtdids=" MTDIDS_DEFAULT "\0" \
 289         \
 290         "fdt_high=0xffffffff\0" \
 291         "fdt_addr=0x18000000\0" \
 292         "initrd_high=0xffffffff\0" \
 293         "bootdir=boot\0" \
 294         "loadfdt=" \
 295                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 296                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 297                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 298                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 299                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 300                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 301                 "fi\0" \
 302         \
 303         "script=6x_bootscript-ventana\0" \
 304         "loadscript=" \
 305                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 306                         "source; " \
 307                 "fi\0" \
 308         \
 309         "uimage=uImage\0" \
 310         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 311         "mmc_boot=" \
 312                 "setenv fsload 'ext2load mmc 0:1'; " \
 313                 "mmc dev 0 && mmc rescan && " \
 314                 "setenv dtype mmc; run loadscript; " \
 315                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 316                         "setenv bootargs console=${console},${baudrate} " \
 317                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 318                                 "rootwait rw ${video} ${extra}; " \
 319                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 320                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 321                         "else " \
 322                                 "bootm; " \
 323                         "fi; " \
 324                 "fi\0" \
 325         \
 326         "sata_boot=" \
 327                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 328                 "setenv dtype sata; run loadscript; " \
 329                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 330                         "setenv bootargs console=${console},${baudrate} " \
 331                                 "root=/dev/sda1 rootfstype=ext4 " \
 332                                 "rootwait rw ${video} ${extra}; " \
 333                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 334                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 335                         "else " \
 336                                 "bootm; " \
 337                         "fi; " \
 338                 "fi\0" \
 339         "usb_boot=" \
 340                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 341                 "setenv dtype usb; run loadscript; " \
 342                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 343                         "setenv bootargs console=${console},${baudrate} " \
 344                                 "root=/dev/sda1 rootfstype=ext4 " \
 345                                 "rootwait rw ${video} ${extra}; " \
 346                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 347                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 348                         "else " \
 349                                 "bootm; " \
 350                         "fi; " \
 351                 "fi\0"
 352
 353 #ifdef CONFIG_SPI_FLASH
 354         #define CONFIG_EXTRA_ENV_SETTINGS \
 355         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 356         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 357         "image_uboot=ventana/u-boot_spi.imx\0" \
 358         \
 359         "spi_koffset=0x90000\0" \
 360         "spi_klen=0x200000\0" \
 361         \
 362         "spi_updateuboot=echo Updating uboot from " \
 363                 "${serverip}:${image_uboot}...; " \
 364                 "tftpboot ${loadaddr} ${image_uboot} && " \
 365                 "sf probe && sf erase 0 80000 && " \
 366                         "sf write ${loadaddr} 400 ${filesize}\0" \
 367         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 368                 "to ${spi_koffset} ...; " \
 369                 "tftp ${loadaddr} ${image_os} && " \
 370                 "sf probe && " \
 371                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 372         \
 373         "flash_boot=" \
 374                 "if sf probe && " \
 375                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 376                         "setenv bootargs console=${console},${baudrate} " \
 377                                 "root=/dev/mtdblock3 " \
 378                                 "rootfstype=squashfs,jffs2 " \
 379                                 "${video} ${extra}; " \
 380                         "bootm; " \
 381                 "fi\0"
 382 #else
 383         #define CONFIG_EXTRA_ENV_SETTINGS \
 384         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 385         \
 386         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 387         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 388                 "tftp ${loadaddr} ${image_rootfs} && " \
 389                 "nand erase.part rootfs && " \
 390                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 391         \
 392         "flash_boot=" \
 393                 "setenv fsload 'ubifsload'; " \
 394                 "ubi part rootfs; " \
 395                 "if ubi check boot; then " \
 396                         "ubifsmount ubi0:boot; " \
 397                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 398                                 "rootfstype=squashfs,ubifs; " \
 399                         "setenv bootdir; " \
 400                 "elif ubi check rootfs; then " \
 401                         "ubifsmount ubi0:rootfs; " \
 402                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 403                                 "rootfstype=ubifs; " \
 404                 "fi; " \
 405                 "setenv dtype nand; run loadscript; " \
 406                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 407                         "setenv bootargs console=${console},${baudrate} " \
 408                                 "root=${root} ${video} ${extra}; " \
 409                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 410                                 "ubifsumount; " \
 411                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 412                         "else " \
 413                                 "ubifsumount; bootm; " \
 414                         "fi; " \
 415                 "fi\0"
 416 #endif
 417
 418 #define CONFIG_BOOTCOMMAND \
 419         "for btype in ${bootdevs}; do " \
 420                 "echo; echo Attempting ${btype} boot...; " \
 421                 "if run ${btype}_boot; then; fi; " \
 422         "done"
 423
 424 /* Device Tree Support */
 425 #define CONFIG_FDT_FIXUP_PARTITIONS
 426
 427 #endif                         /* __CONFIG_H */