include/configs/kilauea.h

   1 /*
   2  * Copyright (c) 2008 Nuovation System Designs, LLC
   3  *   Grant Erickson <gerickson@nuovations.com>
   4  *
   5  * (C) Copyright 2007
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /************************************************************************
  28  * kilauea.h - configuration for AMCC Kilauea (405EX)
  29  ***********************************************************************/
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*-----------------------------------------------------------------------
  35  * High Level Configuration Options
  36  *----------------------------------------------------------------------*/
  37 #define CONFIG_KILAUEA          1               /* Board is Kilauea     */
  38 #define CONFIG_4xx              1               /* ... PPC4xx family    */
  39 #define CONFIG_405EX            1               /* Specifc 405EX support*/
  40 #define CONFIG_SYS_CLK_FREQ     33333333        /* ext frequency to pll */
  41
  42 /*
  43  * Include common defines/options for all AMCC eval boards
  44  */
  45 #define CONFIG_HOSTNAME         kilauea
  46 #include "amcc-common.h"
  47
  48 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
  49 #define CONFIG_MISC_INIT_R      1               /* Call misc_init_r     */
  50 #define CONFIG_BOARD_EMAC_COUNT
  51
  52 /*-----------------------------------------------------------------------
  53  * Base addresses -- Note these are effective addresses where the
  54  * actual resources get mapped (not physical addresses)
  55  *----------------------------------------------------------------------*/
  56 #define CONFIG_SYS_FLASH_BASE           0xFC000000
  57 #define CONFIG_SYS_NAND_ADDR            0xF8000000
  58 #define CONFIG_SYS_FPGA_BASE            0xF0000000
  59 #define CONFIG_SYS_PERIPHERAL_BASE      0xEF600000      /* internal peripherals*/
  60
  61 /*-----------------------------------------------------------------------
  62  * Initial RAM & Stack Pointer Configuration Options
  63  *
  64  *   There are traditionally three options for the primordial
  65  *   (i.e. initial) stack usage on the 405-series:
  66  *
  67  *      1) On-chip Memory (OCM) (i.e. SRAM)
  68  *      2) Data cache
  69  *      3) SDRAM
  70  *
  71  *   For the 405EX(r), there is no OCM, so we are left with (2) or (3)
  72  *   the latter of which is less than desireable since it requires
  73  *   setting up the SDRAM and ECC in assembly code.
  74  *
  75  *   To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
  76  *   select on the External Bus Controller (EBC) and then select a
  77  *   value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
  78  *   physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
  79  *   select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
  80  *   physical SDRAM to use (3).
  81  *-----------------------------------------------------------------------*/
  82
  83 #define CONFIG_SYS_INIT_DCACHE_CS       4
  84
  85 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
  86 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + ( 1 << 30))    /*  1 GiB */
  87 #else
  88 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + (32 << 20))    /* 32 MiB */
  89 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
  90
  91 #define CONFIG_SYS_INIT_RAM_END        (4 << 10)                        /*  4 KiB */
  92 #define CONFIG_SYS_GBL_DATA_SIZE        256             /* num bytes initial data */
  93 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
  94
  95 /*
  96  * If the data cache is being used for the primordial stack and global
  97  * data area, the POST word must be placed somewhere else. The General
  98  * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
  99  * its compare and mask register contents across reset, so it is used
 100  * for the POST word.
 101  */
 102
 103 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
 104 # define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 105 # define CONFIG_SYS_POST_ALT_WORD_ADDR  (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 106 #else
 107 # define CONFIG_SYS_INIT_EXTRA_SIZE     16
 108 # define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
 109 # define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 4)
 110 # define CONFIG_SYS_OCM_DATA_ADDR       CONFIG_SYS_INIT_RAM_ADDR
 111 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 112
 113 /*-----------------------------------------------------------------------
 114  * Serial Port
 115  *----------------------------------------------------------------------*/
 116 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk   */
 117 /* define this if you want console on UART1 */
 118 #undef CONFIG_UART1_CONSOLE
 119
 120 /*-----------------------------------------------------------------------
 121  * Environment
 122  *----------------------------------------------------------------------*/
 123 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 124 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
 125 #else
 126 #define CONFIG_ENV_IS_IN_NAND   1       /* use NAND for environment vars        */
 127 #define CONFIG_ENV_IS_EMBEDDED  1       /* use embedded environment */
 128 #endif
 129
 130 /*-----------------------------------------------------------------------
 131  * FLASH related
 132  *----------------------------------------------------------------------*/
 133 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
 134 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 135
 136 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 137 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 138 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
 139
 140 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 141 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 142
 143 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 144 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 145
 146 #ifdef CONFIG_ENV_IS_IN_FLASH
 147 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector  */
 148 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 149 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 150
 151 /* Address and size of Redundant Environment Sector     */
 152 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 153 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 154 #endif /* CONFIG_ENV_IS_IN_FLASH */
 155
 156 /*
 157  * IPL (Initial Program Loader, integrated inside CPU)
 158  * Will load first 4k from NAND (SPL) into cache and execute it from there.
 159  *
 160  * SPL (Secondary Program Loader)
 161  * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
 162  * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
 163  * controller and the NAND controller so that the special U-Boot image can be
 164  * loaded from NAND to SDRAM.
 165  *
 166  * NUB (NAND U-Boot)
 167  * This NAND U-Boot (NUB) is a special U-Boot version which can be started
 168  * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
 169  *
 170  * On 405EX the SPL is copied to SDRAM before the NAND controller is
 171  * set up. While still running from location 0xfffff000...0xffffffff the
 172  * NAND controller cannot be accessed since it is attached to CS0 too.
 173  */
 174 #define CONFIG_SYS_NAND_BOOT_SPL_SRC    0xfffff000      /* SPL location                 */
 175 #define CONFIG_SYS_NAND_BOOT_SPL_SIZE   (4 << 10)       /* SPL size                     */
 176 #define CONFIG_SYS_NAND_BOOT_SPL_DST    0x00800000      /* Copy SPL here                */
 177 #define CONFIG_SYS_NAND_U_BOOT_DST      0x01000000      /* Load NUB to this addr        */
 178 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr  */
 179 #define CONFIG_SYS_NAND_BOOT_SPL_DELTA  (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 180
 181 /*
 182  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
 183  */
 184 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (16 << 10)      /* Offset to RAM U-Boot image   */
 185 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (384 << 10)     /* Size of RAM U-Boot image     */
 186
 187 /*
 188  * Now the NAND chip has to be defined (no autodetection used!)
 189  */
 190 #define CONFIG_SYS_NAND_PAGE_SIZE       512             /* NAND chip page size          */
 191 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 << 10)      /* NAND chip block size         */
 192 #define CONFIG_SYS_NAND_PAGE_COUNT      32              /* NAND chip page count         */
 193 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   5               /* Location of bad block marker */
 194 #define CONFIG_SYS_NAND_4_ADDR_CYCLE    1               /* Fourth addr used (>32MB)     */
 195
 196 #define CONFIG_SYS_NAND_ECCSIZE 256
 197 #define CONFIG_SYS_NAND_ECCBYTES        3
 198 #define CONFIG_SYS_NAND_ECCSTEPS        (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
 199 #define CONFIG_SYS_NAND_OOBSIZE 16
 200 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
 201 #define CONFIG_SYS_NAND_ECCPOS          {0, 1, 2, 3, 6, 7}
 202
 203 #ifdef CONFIG_ENV_IS_IN_NAND
 204 /*
 205  * For NAND booting the environment is embedded in the U-Boot image. Please take
 206  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
 207  */
 208 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 209 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
 210 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 211 #endif
 212
 213 /*-----------------------------------------------------------------------
 214  * NAND FLASH
 215  *----------------------------------------------------------------------*/
 216 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 217 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 218 #define CONFIG_SYS_NAND_SELECT_DEVICE  1        /* nand driver supports mutipl. chips   */
 219
 220 /*-----------------------------------------------------------------------
 221  * DDR SDRAM
 222  *----------------------------------------------------------------------*/
 223 #define CONFIG_SYS_MBYTES_SDRAM        (256)            /* 256MB                        */
 224
 225 /*
 226  * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
 227  *
 228  * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
 229  *       SDRAM Controller DDR autocalibration values and takes a lot longer
 230  *       to run than Method_B.
 231  * (See the Method_A and Method_B algorithm discription in the file:
 232  *      cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
 233  * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
 234  *
 235  * DDR Autocalibration Method_B is the default.
 236  */
 237 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration */
 238 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION        /* dynamic DDR autocal debug */
 239 #undef  CONFIG_PPC4xx_DDR_METHOD_A
 240
 241 #define CONFIG_SYS_SDRAM0_MB0CF_BASE    ((  0 << 20) + CONFIG_SYS_SDRAM_BASE)
 242
 243 /* DDR1/2 SDRAM Device Control Register Data Values */
 244 #define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3)    | \
 245                                  SDRAM_RXBAS_SDSZ_256MB         | \
 246                                  SDRAM_RXBAS_SDAM_MODE7         | \
 247                                  SDRAM_RXBAS_SDBE_ENABLE)
 248 #define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
 249 #define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
 250 #define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
 251 #define CONFIG_SYS_SDRAM0_MCOPT1        (SDRAM_MCOPT1_PMU_OPEN          | \
 252                                  SDRAM_MCOPT1_8_BANKS           | \
 253                                  SDRAM_MCOPT1_DDR2_TYPE         | \
 254                                  SDRAM_MCOPT1_QDEP              | \
 255                                  SDRAM_MCOPT1_DCOO_DISABLED)
 256 #define CONFIG_SYS_SDRAM0_MCOPT2        0x00000000
 257 #define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \
 258                                  SDRAM_MODT_EB0R_ENABLE)
 259 #define CONFIG_SYS_SDRAM0_MODT1 0x00000000
 260 #define CONFIG_SYS_SDRAM0_CODT          (SDRAM_CODT_RK0R_ON             | \
 261                                  SDRAM_CODT_CKLZ_36OHM          | \
 262                                  SDRAM_CODT_DQS_1_8_V_DDR2      | \
 263                                  SDRAM_CODT_IO_NMODE)
 264 #define CONFIG_SYS_SDRAM0_RTR           SDRAM_RTR_RINT_ENCODE(1560)
 265 #define CONFIG_SYS_SDRAM0_INITPLR0      (SDRAM_INITPLR_ENABLE                   | \
 266                 SDRAM_INITPLR_IMWT_ENCODE(80)                           | \
 267                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
 268 #define CONFIG_SYS_SDRAM0_INITPLR1      (SDRAM_INITPLR_ENABLE                   | \
 269                 SDRAM_INITPLR_IMWT_ENCODE(3)                            | \
 270                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)          | \
 271                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
 272                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
 273 #define CONFIG_SYS_SDRAM0_INITPLR2      (SDRAM_INITPLR_ENABLE                   | \
 274                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 275                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 276                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)                 | \
 277                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
 278 #define CONFIG_SYS_SDRAM0_INITPLR3      (SDRAM_INITPLR_ENABLE                   | \
 279                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 280                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 281                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)                 | \
 282                 SDRAM_INITPLR_IMA_ENCODE(0))
 283 #define CONFIG_SYS_SDRAM0_INITPLR4      (SDRAM_INITPLR_ENABLE                   | \
 284                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 285                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 286                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
 287                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
 288                                          JEDEC_MA_EMR_RTT_75OHM))
 289 #define CONFIG_SYS_SDRAM0_INITPLR5      (SDRAM_INITPLR_ENABLE                   | \
 290                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 291                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 292                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
 293                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
 294                                          JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
 295                                          JEDEC_MA_MR_BLEN_4 | \
 296                                          JEDEC_MA_MR_DLL_RESET))
 297 #define CONFIG_SYS_SDRAM0_INITPLR6      (SDRAM_INITPLR_ENABLE                   | \
 298                 SDRAM_INITPLR_IMWT_ENCODE(3)                            | \
 299                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)          | \
 300                 SDRAM_INITPLR_IBA_ENCODE(0x0)                           | \
 301                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
 302 #define CONFIG_SYS_SDRAM0_INITPLR7      (SDRAM_INITPLR_ENABLE                   | \
 303                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
 304                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
 305 #define CONFIG_SYS_SDRAM0_INITPLR8      (SDRAM_INITPLR_ENABLE                   | \
 306                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
 307                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
 308 #define CONFIG_SYS_SDRAM0_INITPLR9      (SDRAM_INITPLR_ENABLE                   | \
 309                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
 310                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
 311 #define CONFIG_SYS_SDRAM0_INITPLR10     (SDRAM_INITPLR_ENABLE                   | \
 312                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
 313                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
 314 #define CONFIG_SYS_SDRAM0_INITPLR11     (SDRAM_INITPLR_ENABLE                   | \
 315                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 316                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 317                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
 318                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
 319                                          JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
 320                                          JEDEC_MA_MR_BLEN_4))
 321 #define CONFIG_SYS_SDRAM0_INITPLR12     (SDRAM_INITPLR_ENABLE                   | \
 322                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 323                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 324                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
 325                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
 326                                          JEDEC_MA_EMR_RDQS_DISABLE | \
 327                                          JEDEC_MA_EMR_DQS_DISABLE | \
 328                                          JEDEC_MA_EMR_RTT_DISABLED | \
 329                                          JEDEC_MA_EMR_ODS_NORMAL))
 330 #define CONFIG_SYS_SDRAM0_INITPLR13     (SDRAM_INITPLR_ENABLE                   | \
 331                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
 332                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
 333                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
 334                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
 335                                          JEDEC_MA_EMR_RDQS_DISABLE | \
 336                                          JEDEC_MA_EMR_DQS_DISABLE | \
 337                                          JEDEC_MA_EMR_RTT_DISABLED | \
 338                                          JEDEC_MA_EMR_ODS_NORMAL))
 339 #define CONFIG_SYS_SDRAM0_INITPLR14     (SDRAM_INITPLR_DISABLE)
 340 #define CONFIG_SYS_SDRAM0_INITPLR15     (SDRAM_INITPLR_DISABLE)
 341 #define CONFIG_SYS_SDRAM0_RQDC          (SDRAM_RQDC_RQDE_ENABLE | \
 342                                  SDRAM_RQDC_RQFD_ENCODE(56))
 343 #define CONFIG_SYS_SDRAM0_RFDC          SDRAM_RFDC_RFFD_ENCODE(521)
 344 #define CONFIG_SYS_SDRAM0_RDCC          (SDRAM_RDCC_RDSS_T2)
 345 #define CONFIG_SYS_SDRAM0_DLCR          (SDRAM_DLCR_DCLM_AUTO           | \
 346                                  SDRAM_DLCR_DLCS_CONT_DONE      | \
 347                                  SDRAM_DLCR_DLCV_ENCODE(165))
 348 #define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV)
 349 #define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
 350 #define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
 351                                  SDRAM_SDTR1_RTW_2_CLK  | \
 352                                  SDRAM_SDTR1_RTRO_1_CLK)
 353 #define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK          | \
 354                                  SDRAM_SDTR2_WTR_2_CLK          | \
 355                                  SDRAM_SDTR2_XSNR_32_CLK        | \
 356                                  SDRAM_SDTR2_WPC_4_CLK          | \
 357                                  SDRAM_SDTR2_RPC_2_CLK          | \
 358                                  SDRAM_SDTR2_RP_3_CLK           | \
 359                                  SDRAM_SDTR2_RRD_2_CLK)
 360 #define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8)      | \
 361                                  SDRAM_SDTR3_RC_ENCODE(11)      | \
 362                                  SDRAM_SDTR3_XCS                | \
 363                                  SDRAM_SDTR3_RFC_ENCODE(26))
 364 #define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
 365                                  SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
 366                                  SDRAM_MMODE_BLEN_4)
 367 #define CONFIG_SYS_SDRAM0_MEMODE        (SDRAM_MEMODE_DQS_DISABLE | \
 368                                  SDRAM_MEMODE_RTT_75OHM)
 369
 370 /*-----------------------------------------------------------------------
 371  * I2C
 372  *----------------------------------------------------------------------*/
 373 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 374
 375 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   6       /* 24C02 requires 5ms delay */
 376 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52    /* I2C boot EEPROM (24C02BN)    */
 377 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1       /* Bytes of address             */
 378
 379 /* Standard DTT sensor configuration */
 380 #define CONFIG_DTT_DS1775       1
 381 #define CONFIG_DTT_SENSORS      { 0 }
 382 #define CONFIG_SYS_I2C_DTT_ADDR 0x48
 383
 384 /* RTC configuration */
 385 #define CONFIG_RTC_DS1338       1
 386 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 387
 388 /*-----------------------------------------------------------------------
 389  * Ethernet
 390  *----------------------------------------------------------------------*/
 391 #define CONFIG_M88E1111_PHY     1
 392 #define CONFIG_IBM_EMAC4_V4     1
 393 #define CONFIG_EMAC_PHY_MODE    EMAC_PHY_MODE_RGMII_RGMII
 394 #define CONFIG_PHY_ADDR         1       /* PHY address, See schematics  */
 395
 396 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
 397 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 398
 399 #define CONFIG_HAS_ETH0         1
 400
 401 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
 402 #define CONFIG_PHY1_ADDR        2
 403
 404 /* Debug messages for the DDR autocalibration */
 405 #define CONFIG_AUTOCALIB                "silent\0"  /* default is non-verbose */
 406
 407 /*
 408  * Default environment variables
 409  */
 410 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 411         CONFIG_AMCC_DEF_ENV                                             \
 412         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 413         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
 414         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 415         CONFIG_AMCC_DEF_ENV_NAND_UPD                                    \
 416         "logversion=2\0"                                                \
 417         "kernel_addr=fc000000\0"                                        \
 418         "fdt_addr=fc1e0000\0"                                           \
 419         "ramdisk_addr=fc200000\0"                                       \
 420         "pciconfighost=1\0"                                             \
 421         "pcie_mode=RP:RP\0"                                             \
 422         ""
 423
 424 /*
 425  * Commands additional to the ones defined in amcc-common.h
 426  */
 427 #define CONFIG_CMD_DATE
 428 #define CONFIG_CMD_LOG
 429 #define CONFIG_CMD_NAND
 430 #define CONFIG_CMD_PCI
 431 #define CONFIG_CMD_SNTP
 432
 433 /*
 434  * Don't run the memory POST on the NAND-booting version. It will
 435  * overwrite part of the U-Boot image which is already loaded from NAND
 436  * to SDRAM.
 437  */
 438 #if defined(CONFIG_NAND_U_BOOT)
 439 #define CONFIG_SYS_POST_MEMORY_ON       0
 440 #else
 441 #define CONFIG_SYS_POST_MEMORY_ON       CONFIG_SYS_POST_MEMORY
 442 #endif
 443
 444 /* POST support */
 445 #define CONFIG_POST             (CONFIG_SYS_POST_CACHE          | \
 446                                  CONFIG_SYS_POST_CPU            | \
 447                                  CONFIG_SYS_POST_ETHER          | \
 448                                  CONFIG_SYS_POST_I2C            | \
 449                                  CONFIG_SYS_POST_MEMORY_ON      | \
 450                                  CONFIG_SYS_POST_UART)
 451
 452 /* Define here the base-addresses of the UARTs to test in POST */
 453 #define CONFIG_SYS_POST_UART_TABLE      {UART0_BASE, UART1_BASE}
 454
 455 #define CONFIG_LOGBUFFER
 456 #define CONFIG_SYS_POST_CACHE_ADDR      0x00800000 /* free virtual address      */
 457
 458 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 459
 460 /*-----------------------------------------------------------------------
 461  * PCI stuff
 462  *----------------------------------------------------------------------*/
 463 #define CONFIG_PCI                      /* include pci support          */
 464 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play         */
 465 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
 466 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 467
 468 /*-----------------------------------------------------------------------
 469  * PCIe stuff
 470  *----------------------------------------------------------------------*/
 471 #define CONFIG_SYS_PCIE_MEMBASE 0x90000000      /* mapped PCIe memory   */
 472 #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000      /* 128 Meg, smallest incr per port */
 473
 474 #define CONFIG_SYS_PCIE0_CFGBASE        0xa0000000      /* remote access */
 475 #define CONFIG_SYS_PCIE0_XCFGBASE       0xb0000000      /* local access */
 476 #define CONFIG_SYS_PCIE0_CFGMASK        0xe0000001      /* 512 Meg */
 477
 478 #define CONFIG_SYS_PCIE1_CFGBASE        0xc0000000      /* remote access */
 479 #define CONFIG_SYS_PCIE1_XCFGBASE       0xd0000000      /* local access */
 480 #define CONFIG_SYS_PCIE1_CFGMASK        0xe0000001      /* 512 Meg */
 481
 482 #define CONFIG_SYS_PCIE0_UTLBASE        0xef502000
 483 #define CONFIG_SYS_PCIE1_UTLBASE        0xef503000
 484
 485 /* base address of inbound PCIe window */
 486 #define CONFIG_SYS_PCIE_INBOUND_BASE    0x0000000000000000ULL
 487
 488 /*-----------------------------------------------------------------------
 489  * External Bus Controller (EBC) Setup
 490  *----------------------------------------------------------------------*/
 491 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 492 /* booting from NAND, so NAND chips select has to be on CS 0 */
 493 #define CONFIG_SYS_NAND_CS              0               /* NAND chip connected to CSx   */
 494
 495 /* Memory Bank 1 (NOR-FLASH) initialization                                     */
 496 #define CONFIG_SYS_EBC_PB1AP            0x05806500
 497 #define CONFIG_SYS_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
 498
 499 /* Memory Bank 0 (NAND-FLASH) initialization                                    */
 500 #define CONFIG_SYS_EBC_PB0AP            0x018003c0
 501 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_NAND_ADDR | 0x1e000)
 502 #else
 503 #define CONFIG_SYS_NAND_CS              1               /* NAND chip connected to CSx   */
 504
 505 /* Memory Bank 0 (NOR-FLASH) initialization                                     */
 506 #define CONFIG_SYS_EBC_PB0AP            0x05806500
 507 #define CONFIG_SYS_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
 508
 509 /* Memory Bank 1 (NAND-FLASH) initialization                                    */
 510 #define CONFIG_SYS_EBC_PB1AP            0x018003c0
 511 #define CONFIG_SYS_EBC_PB1CR            (CONFIG_SYS_NAND_ADDR | 0x1e000)
 512 #endif
 513
 514 /* Memory Bank 2 (FPGA) initialization                                          */
 515 #define CONFIG_SYS_EBC_PB2AP           0x9400C800
 516 #define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_FPGA_BASE | 0x18000)
 517
 518 #define CONFIG_SYS_EBC_CFG              0x7FC00000 /*  EBC0_CFG */
 519
 520 /*-----------------------------------------------------------------------
 521  * GPIO Setup
 522  *----------------------------------------------------------------------*/
 523 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 524 {                                                                                       \
 525 /* GPIO Core 0 */                                                                       \
 526 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0)                 */      \
 527 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1)                 */      \
 528 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2)                 */      \
 529 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3)                 */      \
 530 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20)    USB2_DATA(4)    */      \
 531 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21)    USB2_DATA(5)    */      \
 532 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22)    USB2_DATA(6)    */      \
 533 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23)    USB2_DATA(7)    */      \
 534 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1)   IRQ(7)          */      \
 535 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2)   IRQ(8)          */      \
 536 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)  IRQ(9)          */      \
 537 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6)                         */      \
 538 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)   USB2_DATA(0)    */      \
 539 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)   USB2_DATA(1)    */      \
 540 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)   USB2_DATA(2)    */      \
 541 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)   USB2_DATA(3)    */      \
 542 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD      UART1_CTS       */      \
 543 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR      UART1_RTS       */      \
 544 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS                      */      \
 545 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS                      */      \
 546 {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR      UART1_TX        */      \
 547 {GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI       UART1_RX        */      \
 548 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ   DMA_ACK2        */      \
 549 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK   DMA_REQ2        */      \
 550 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ    DMA_EOT2        IRQ(4) */ \
 551 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK    DMA_ACK3        IRQ(3) */ \
 552 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)    DMA_EOT0        TS(3) */ \
 553 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ    DMA_EOT3        IRQ(5) */ \
 554 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO28                                */      \
 555 {GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1       IRQ(2)          */      \
 556 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1       IRQ(1)          */      \
 557 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO31 DMA_ACK1       IRQ(0)          */      \
 558 }                                                                                               \
 559 }
 560
 561 /*-----------------------------------------------------------------------
 562  * Some Kilauea stuff..., mainly fpga registers
 563  */
 564 #define CONFIG_SYS_FPGA_REG_BASE                CONFIG_SYS_FPGA_BASE
 565 #define CONFIG_SYS_FPGA_FIFO_BASE               (in32(CONFIG_SYS_FPGA_BASE) | (1 << 10))
 566
 567 /* interrupt */
 568 #define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT       0x80000000
 569 #define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT       0x40000000
 570 #define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT       0x20000000
 571 #define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT       0x10000000
 572 #define CONFIG_SYS_FPGA_PHY0_INT                0x08000000
 573 #define CONFIG_SYS_FPGA_PHY1_INT                0x04000000
 574 #define CONFIG_SYS_FPGA_SLIC0_INT               0x02000000
 575 #define CONFIG_SYS_FPGA_SLIC1_INT               0x01000000
 576
 577 /* DPRAM setting */
 578 /* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
 579 #define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE        0x00400000      /* 64 B */
 580 #define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE        0x00100000      /* 64 B */
 581 #define CONFIG_SYS_FPGA_DPRAM_RW_TYPE           0x00080000
 582 #define CONFIG_SYS_FPGA_DPRAM_RST               0x00040000
 583 #define CONFIG_SYS_FPGA_UART0_FO                0x00020000
 584 #define CONFIG_SYS_FPGA_UART1_FO                0x00010000
 585
 586 /* loopback */
 587 #define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK       0x00004000
 588 #define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK       0x00008000
 589 #define CONFIG_SYS_FPGA_SLIC0_ENABLE            0x00002000
 590 #define CONFIG_SYS_FPGA_SLIC1_ENABLE            0x00001000
 591 #define CONFIG_SYS_FPGA_SLIC0_CS                0x00000800
 592 #define CONFIG_SYS_FPGA_SLIC1_CS                0x00000400
 593 #define CONFIG_SYS_FPGA_USER_LED0               0x00000200
 594 #define CONFIG_SYS_FPGA_USER_LED1               0x00000100
 595
 596 #endif  /* __CONFIG_H */