include/configs/mucmc52.h

   1 /*
   2  * (C) Copyright 2008
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * (C) Copyright 2003-2005
   6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  * (easy to change)
  33  */
  34
  35 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU               */
  36 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU)      */
  37 #define CONFIG_MUCMC52          1       /* MUCMC52 board                        */
  38
  39 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz         */
  40
  41 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH     */
  42 #define BOOTFLAG_WARM           0x02    /* Software reboot                      */
  43
  44 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs                     */
  45 #if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
  46 #  define       CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value        */
  47 #endif
  48
  49 #define CONFIG_BOARD_EARLY_INIT_R
  50
  51 #define CONFIG_LAST_STAGE_INIT
  52
  53 #define CONFIG_HIGH_BATS        1       /* High BATs supported                  */
  54 /*
  55  * Serial console configuration
  56  */
  57 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1   */
  58 #define CONFIG_BAUDRATE         38400   /* ... at 38400 bps     */
  59 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  60
  61 /* Partitions */
  62 #define CONFIG_DOS_PARTITION
  63
  64 /*
  65  * Command line configuration.
  66  */
  67 #include <config_cmd_default.h>
  68
  69 #define CONFIG_CMD_DATE
  70 #define CONFIG_CMD_DISPLAY
  71 #define CONFIG_CMD_DHCP
  72 #define CONFIG_CMD_EEPROM
  73 #define CONFIG_CMD_FAT
  74 #define CONFIG_CMD_I2C
  75 #define CONFIG_CMD_DTT
  76 #define CONFIG_CMD_IDE
  77 #define CONFIG_CMD_MII
  78 #define CONFIG_CMD_NFS
  79 #define CONFIG_CMD_PCI
  80 #define CONFIG_CMD_PING
  81 #define CONFIG_CMD_SNTP
  82
  83 #define CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
  84
  85 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
  86 #   define      CONFIG_SYS_LOWBOOT              1
  87 #endif
  88
  89 /*
  90  * Autobooting
  91  */
  92 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
  93
  94 #define CONFIG_PREBOOT  "echo;" \
  95         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
  96         "echo"
  97
  98 #undef  CONFIG_BOOTARGS
  99
 100 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 101         "netdev=eth0\0"                                                 \
 102         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 103                 "nfsroot=${serverip}:${rootpath}\0"                     \
 104         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 105         "addip=setenv bootargs ${bootargs} "                            \
 106                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 107                 ":${hostname}:${netdev}:off panic=1\0"                  \
 108         "flash_nfs=run nfsargs addip;"                                  \
 109                 "bootm ${kernel_addr}\0"                                \
 110         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
 111         "rootpath=/opt/eldk/ppc_82xx\0"                                 \
 112         ""
 113
 114 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 115
 116 #define CONFIG_MISC_INIT_R      1
 117
 118 /*
 119  * IPB Bus clocking configuration.
 120  */
 121 #undef  CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 122
 123 /*
 124  * I2C configuration
 125  */
 126 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 127 #define CONFIG_SYS_I2C_MODULE           2       /* Select I2C module #1 or #2 */
 128
 129 #define CONFIG_SYS_I2C_SPEED            100000 /* 100 kHz */
 130 #define CONFIG_SYS_I2C_SLAVE            0x7F
 131
 132 /*
 133  * EEPROM configuration
 134  */
 135 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x58
 136 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 137 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 138 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 139
 140 /*
 141  * RTC configuration
 142  */
 143 #define CONFIG_RTC_PCF8563
 144 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 145
 146 /* I2C SYSMON (LM75) */
 147 #define CONFIG_DTT_LM81                 1       /* ON Semi's LM75               */
 148 #define CONFIG_DTT_SENSORS              {0}     /* Sensor addresses             */
 149 #define CONFIG_SYS_DTT_MAX_TEMP         70
 150 #define CONFIG_SYS_DTT_LOW_TEMP         -30
 151 #define CONFIG_SYS_DTT_HYSTERESIS               3
 152
 153 /*
 154  * Flash configuration
 155  */
 156 #define CONFIG_SYS_FLASH_BASE           0xFF800000
 157
 158 #define CONFIG_SYS_FLASH_SIZE           0x00800000 /* 8 MByte */
 159 #define CONFIG_SYS_MAX_FLASH_SECT       67      /* max num of sects on one chip */
 160
 161 #define CONFIG_ENV_ADDR         (TEXT_BASE+0x40000) /* second sector */
 162 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks
 163                                            (= chip selects) */
 164 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
 165 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
 166
 167 #define CONFIG_FLASH_CFI_DRIVER
 168 #define CONFIG_SYS_FLASH_CFI
 169 #define CONFIG_SYS_FLASH_EMPTY_INFO
 170 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
 171
 172 /*
 173  * Environment settings
 174  */
 175 #define CONFIG_ENV_IS_IN_FLASH  1
 176 #define CONFIG_ENV_SIZE         0x4000
 177 #define CONFIG_ENV_SECT_SIZE    0x20000
 178 #define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 179 #define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 180
 181 /*
 182  * Memory map
 183  */
 184 #define CONFIG_SYS_MBAR         0xF0000000
 185 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 186 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 187 #define CONFIG_SYS_DISPLAY_BASE 0x80600000
 188 #define CONFIG_SYS_STATUS1_BASE 0x80600200
 189 #define CONFIG_SYS_STATUS2_BASE 0x80600300
 190 #define CONFIG_SYS_PMI_UNI_BASE 0x80800000
 191 #define CONFIG_SYS_PMI_BROAD_BASE       0x80810000
 192
 193 /* Settings for XLB = 132 MHz */
 194 #define SDRAM_DDR        1
 195 #define SDRAM_MODE      0x018D0000
 196 #define SDRAM_EMODE     0x40090000
 197 #define SDRAM_CONTROL   0x714f0f00
 198 #define SDRAM_CONFIG1   0x73722930
 199 #define SDRAM_CONFIG2   0x47770000
 200 #define SDRAM_TAPDELAY  0x10000000
 201
 202 /* Use ON-Chip SRAM until RAM will be available */
 203 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 204 #ifdef CONFIG_POST
 205 /* preserve space for the post_word at end of on-chip SRAM */
 206 #define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
 207 #else
 208 #define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
 209 #endif
 210
 211 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
 212 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 213 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 214
 215 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
 216 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 217 #   define      CONFIG_SYS_RAMBOOT      1
 218 #endif
 219
 220 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 221 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)     /* Reserve 128 kB for malloc()  */
 222 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 223
 224 /*
 225  * Ethernet configuration
 226  */
 227 #define CONFIG_MPC5xxx_FEC      1
 228 #define CONFIG_PHY_ADDR         0x00
 229 #define CONFIG_MII              1               /* MII PHY management           */
 230
 231 /*
 232  * GPIO configuration
 233  */
 234 #define CONFIG_SYS_GPS_PORT_CONFIG      0x8D550644
 235
 236 /*use  Hardware WDT */
 237 #define CONFIG_HW_WATCHDOG
 238
 239 /*
 240  * Miscellaneous configurable options
 241  */
 242 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 243 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt   */
 244 #if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
 245 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 246 #else
 247 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 248 #endif
 249 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 250 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 251 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 252
 253 /* Enable an alternate, more extensive memory test */
 254 #define CONFIG_SYS_ALT_MEMTEST
 255
 256 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 257 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 258
 259 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 260
 261 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 262
 263 /*
 264  * Enable loopw commando. This has only affect, if CONFIG_SYS_CMD_MEM is defined,
 265  * which is normally part of the default commands (CFV_CMD_DFL)
 266  */
 267 #define CONFIG_LOOPW
 268
 269 /*
 270  * Various low-level settings
 271  */
 272 #if defined(CONFIG_MPC5200)
 273 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 274 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 275 #else
 276 #define CONFIG_SYS_HID0_INIT            0
 277 #define CONFIG_SYS_HID0_FINAL           0
 278 #endif
 279
 280 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 281 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 282 #define CONFIG_SYS_BOOTCS_CFG           0x0004FB00
 283 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 284 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 285
 286 /* 8Mbit SRAM @0x80100000 */
 287 #define CONFIG_SYS_CS1_START            0x80100000
 288 #define CONFIG_SYS_CS1_SIZE             0x00100000
 289 #define CONFIG_SYS_CS1_CFG              0x00019B00
 290
 291 /* FRAM 32Kbyte @0x80700000 */
 292 #define CONFIG_SYS_CS2_START            0x80700000
 293 #define CONFIG_SYS_CS2_SIZE             0x00008000
 294 #define CONFIG_SYS_CS2_CFG              0x00019800
 295
 296 /* Display H1, Status Inputs, EPLD @0x80600000 */
 297 #define CONFIG_SYS_CS3_START            0x80600000
 298 #define CONFIG_SYS_CS3_SIZE             0x00100000
 299 #define CONFIG_SYS_CS3_CFG              0x00019800
 300
 301 /* PMI Unicast 32Kbyte @0x80800000 */
 302 #define CONFIG_SYS_CS6_START            CONFIG_SYS_PMI_UNI_BASE
 303 #define CONFIG_SYS_CS6_SIZE             0x00008000
 304 #define CONFIG_SYS_CS6_CFG              0xFFFFF930
 305
 306 /* PMI Broadcast 32Kbyte @0x80810000 */
 307 #define CONFIG_SYS_CS7_START            CONFIG_SYS_PMI_BROAD_BASE
 308 #define CONFIG_SYS_CS7_SIZE             0x00008000
 309 #define CONFIG_SYS_CS7_CFG              0xFF00F930
 310
 311 #define CONFIG_SYS_CS_BURST             0x00000000
 312 #define CONFIG_SYS_CS_DEADCYCLE 0x33333333
 313
 314 /*-----------------------------------------------------------------------
 315  * IDE/ATA stuff Supports IDE harddisk
 316  *-----------------------------------------------------------------------
 317  */
 318
 319 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 320
 321 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 322 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 323
 324 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 325 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 2 drives per IDE bus    */
 326
 327 #define CONFIG_IDE_PREINIT      1
 328
 329 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 330
 331 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 332
 333 /* Offset for data I/O                  */
 334 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 335
 336 /* Offset for normal register accesses  */
 337 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 338
 339 /* Offset for alternate registers       */
 340 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 341
 342 /* Interval between registers           */
 343 #define CONFIG_SYS_ATA_STRIDE          4
 344
 345 #define CONFIG_ATAPI            1
 346
 347 /*
 348  * PCI Mapping:
 349  * 0x40000000 - 0x4fffffff - PCI Memory
 350  * 0x50000000 - 0x50ffffff - PCI IO Space
 351  */
 352 #define CONFIG_PCI              1
 353 #define CONFIG_PCI_PNP          1
 354 #define CONFIG_PCI_SCAN_SHOW    1
 355 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 356
 357 #define CONFIG_PCI_MEM_BUS      0x40000000
 358 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
 359 #define CONFIG_PCI_MEM_SIZE     0x10000000
 360
 361 #define CONFIG_PCI_IO_BUS       0x50000000
 362 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
 363 #define CONFIG_PCI_IO_SIZE      0x01000000
 364
 365 #define CONFIG_SYS_ISA_IO               CONFIG_PCI_IO_BUS
 366
 367 /*---------------------------------------------------------------------*/
 368 /* Display addresses                                                   */
 369 /*---------------------------------------------------------------------*/
 370
 371 #define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
 372 #define CONFIG_SYS_DISP_CWORD           (CONFIG_SYS_DISPLAY_BASE + 0x30)
 373
 374 #endif /* __CONFIG_H */