include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #define CONFIG_NR_DRAM_BANKS            2
  14 #define CONFIG_NAND
  15
  16 #include <configs/ti_omap3_common.h>
  17 #include <asm/mach-types.h>
  18
  19 /*
  20  * We are only ever GP parts and will utilize all of the "downloaded image"
  21  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  22  */
  23 #undef CONFIG_SPL_TEXT_BASE
  24 #define CONFIG_SPL_TEXT_BASE            0x40200000
  25
  26 #define CONFIG_MISC_INIT_R
  27
  28 #define CONFIG_REVISION_TAG             1
  29
  30 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
  31 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  32                        (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  33 #define CONFIG_STATUS_LED
  34 #define CONFIG_BOARD_SPECIFIC_LED
  35 #define CONFIG_GPIO_LED
  36 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  37 #define RED_LED_GPIO 27
  38 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  39 #define RED_LED_GPIO 16
  40 #endif
  41 #define RED_LED_DEV                     0
  42 #define STATUS_LED_BIT                  RED_LED_GPIO
  43 #define STATUS_LED_STATE                STATUS_LED_ON
  44 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  45 #define STATUS_LED_BOOT                 RED_LED_DEV
  46 #endif
  47
  48 /* GPIO banks */
  49 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  50 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  51 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  52
  53 /* USB */
  54 #define CONFIG_USB_MUSB_UDC             1
  55 #define CONFIG_USB_OMAP3                1
  56 #define CONFIG_TWL4030_USB              1
  57
  58 /* USB device configuration */
  59 #define CONFIG_USB_DEVICE               1
  60 #define CONFIG_USB_TTY                  1
  61
  62 /* Change these to suit your needs */
  63 #define CONFIG_USBD_VENDORID            0x0451
  64 #define CONFIG_USBD_PRODUCTID           0x5678
  65 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  66 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  67
  68 #define CONFIG_CMD_MTDPARTS
  69 #define CONFIG_CMD_ONENAND
  70
  71 #ifndef CONFIG_SPL_BUILD
  72
  73 /* Environment */
  74 #define ENV_DEVICE_SETTINGS \
  75         "stdin=serial\0" \
  76         "stdout=serial\0" \
  77         "stderr=serial\0"
  78
  79 #define MEM_LAYOUT_SETTINGS \
  80         DEFAULT_LINUX_BOOT_ENV \
  81         "scriptaddr=0x87E00000\0" \
  82         "pxefile_addr_r=0x87F00000\0"
  83
  84 #define BOOT_TARGET_DEVICES(func) \
  85         func(MMC, mmc, 0)
  86
  87 #include <config_distro_bootcmd.h>
  88
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         ENV_DEVICE_SETTINGS \
  91         MEM_LAYOUT_SETTINGS \
  92         BOOTENV
  93
  94 #endif
  95
  96 /*
  97  * SMSC911x Ethernet
  98  */
  99 #if defined(CONFIG_CMD_NET)
 100 #define CONFIG_SMC911X
 101 #define CONFIG_SMC911X_32_BIT
 102 #define CONFIG_SMC911X_BASE             0x2C000000
 103 #endif /* (CONFIG_CMD_NET) */
 104
 105 #define CONFIG_RBTREE
 106 #define CONFIG_MTD_PARTITIONS
 107 #define CONFIG_SYS_MTDPARTS_RUNTIME
 108
 109 /* OneNAND config */
 110 #define CONFIG_USE_ONENAND_BOARD_INIT
 111 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 112 #define CONFIG_SYS_ONENAND_BLOCK_SIZE   (128*1024)
 113
 114 /* NAND config */
 115 #define CONFIG_SPL_OMAP3_ID_NAND
 116 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 117 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 118 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 119 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 120 #define CONFIG_SYS_NAND_OOBSIZE         64
 121 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 122 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 123 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, \
 124                                          10, 11, 12, 13, 14, 15, 16, 17, \
 125                                          18, 19, 20, 21, 22, 23, 24, 25, \
 126                                          26, 27, 28, 29, 30, 31, 32, 33, \
 127                                          34, 35, 36, 37, 38, 39, 40, 41, \
 128                                          42, 43, 44, 45, 46, 47, 48, 49, \
 129                                          50, 51, 52, 53, 54, 55, 56, 57, }
 130 #define CONFIG_SYS_NAND_ECCSIZE         512
 131 #define CONFIG_SYS_NAND_ECCBYTES        14
 132 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 133 #define CONFIG_NAND_OMAP_GPMC
 134 #define CONFIG_BCH
 135
 136 /* UBI configuration */
 137 #define CONFIG_SPL_UBI                  1
 138 #define CONFIG_SPL_UBI_MAX_VOL_LEBS     256
 139 #define CONFIG_SPL_UBI_MAX_PEB_SIZE     (256*1024)
 140 #define CONFIG_SPL_UBI_MAX_PEBS         4096
 141 #define CONFIG_SPL_UBI_VOL_IDS          8
 142 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID  0
 143 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID   3
 144 #define CONFIG_SPL_UBI_LOAD_ARGS_ID     4
 145 #define CONFIG_SPL_UBI_PEB_OFFSET       4
 146 #define CONFIG_SPL_UBI_VID_OFFSET       512
 147 #define CONFIG_SPL_UBI_LEB_START        2048
 148 #define CONFIG_SPL_UBI_INFO_ADDR        0x88080000
 149
 150 /* environment organization */
 151 #define CONFIG_ENV_IS_IN_UBI            1
 152 #define CONFIG_ENV_UBI_PART             "UBI"
 153 #define CONFIG_ENV_UBI_VOLUME           "config"
 154 #define CONFIG_ENV_UBI_VOLUME_REDUND    "config_r"
 155 #define CONFIG_UBI_SILENCE_MSG          1
 156 #define CONFIG_UBIFS_SILENCE_MSG        1
 157 #define CONFIG_ENV_SIZE                 (32*1024)
 158
 159 #endif /* __IGEP00X0_H */