include/configs/omap3_logic.h

   1 /*
   2  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
   3  *      Peter Barada <peter.barada@logicpd.com>
   4  *
   5  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
   6  * reference boards.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /* High Level Configuration Options */
  15
  16 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  17
  18 #include <configs/ti_omap3_common.h>
  19
  20 #ifdef CONFIG_SPL_BUILD
  21 /*
  22  * Disable MMC DM for SPL build and can be re-enabled after adding
  23  * DM support in SPL
  24  */
  25 #undef CONFIG_DM_MMC
  26 #undef OMAP_HSMMC_USE_GPIO
  27
  28 /* select serial console configuration for SPL */
  29 #undef CONFIG_CONS_INDEX
  30 #define CONFIG_CONS_INDEX              1
  31 #define CONFIG_SYS_NS16550_COM1                OMAP34XX_UART1
  32 #endif
  33
  34
  35 /*
  36  * We are only ever GP parts and will utilize all of the "downloaded image"
  37  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
  38  * order to allow for BCH8 to fit in.
  39  */
  40 #undef CONFIG_SPL_TEXT_BASE
  41 #define CONFIG_SPL_FRAMEWORK
  42 #define CONFIG_SPL_TEXT_BASE            0x40200000
  43
  44 #define CONFIG_MISC_INIT_R              /* misc_init_r dumps the die id */
  45 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  46 #define CONFIG_SETUP_MEMORY_TAGS
  47 #define CONFIG_INITRD_TAG
  48 #define CONFIG_REVISION_TAG
  49
  50 /* Hardware drivers */
  51
  52 #define CONFIG_USB_OMAP3
  53
  54 /* commands to include */
  55 #define CONFIG_CMD_NAND
  56 #define CONFIG_CMD_MTDPARTS
  57 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands       */
  58
  59 /* I2C */
  60 #define CONFIG_SYS_I2C_OMAP34XX
  61 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* EEPROM AT24C64      */
  62
  63 /* USB */
  64 #define CONFIG_USB_MUSB_OMAP2PLUS
  65 #define CONFIG_USB_MUSB_PIO_ONLY
  66 #define CONFIG_USB_ETHER
  67 #define CONFIG_USB_ETHER_RNDIS
  68 #define CONFIG_USB_FUNCTION_FASTBOOT
  69 #define CONFIG_CMD_FASTBOOT
  70 #define CONFIG_ANDROID_BOOT_IMAGE
  71 #define CONFIG_FASTBOOT_BUF_ADDR        CONFIG_SYS_LOAD_ADDR
  72 #define CONFIG_FASTBOOT_BUF_SIZE        0x07000000
  73
  74 /* TWL4030 */
  75 #define CONFIG_TWL4030_PWM
  76 #define CONFIG_TWL4030_USB
  77
  78 /* Board NAND Info. */
  79 #ifdef CONFIG_NAND
  80 #define CONFIG_NAND_OMAP_GPMC
  81
  82 #define CONFIG_CMD_UBIFS                /* Read-only UBI volume operations */
  83 #define CONFIG_RBTREE                   /* required by CONFIG_CMD_UBI */
  84 #define CONFIG_LZO                      /* required by CONFIG_CMD_UBIFS */
  85
  86 #define CONFIG_SYS_NAND_ADDR            NAND_BASE /* physical address */
  87                                                   /* to access nand */
  88 #define CONFIG_SYS_MAX_NAND_DEVICE      1         /* Max number of */
  89                                                   /* NAND devices */
  90 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  91 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  92 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  93 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  94 #define CONFIG_SYS_NAND_OOBSIZE         64
  95 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
  96 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  97 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
  98                                          13, 14, 16, 17, 18, 19, 20, 21, 22, \
  99                                          23, 24, 25, 26, 27, 28, 30, 31, 32, \
 100                                          33, 34, 35, 36, 37, 38, 39, 40, 41, \
 101                                          42, 44, 45, 46, 47, 48, 49, 50, 51, \
 102                                          52, 53, 54, 55, 56}
 103
 104 #define CONFIG_SYS_NAND_ECCSIZE         512
 105 #define CONFIG_SYS_NAND_ECCBYTES        13
 106 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 107 #define CONFIG_BCH
 108 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 109 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 110 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 111 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 112 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 113 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 114 #define MTDPARTS_DEFAULT        "mtdparts=omap2-nand.0:"\
 115                                                         "512k(MLO),"\
 116                                                         "1792k(u-boot),"\
 117                                                         "128k(spl-os)," \
 118                                                         "128k(u-boot-env),"\
 119                                                         "6m(kernel),-(fs)"
 120 #endif
 121
 122 /* Environment information */
 123
 124 #define CONFIG_PREBOOT \
 125         "setenv preboot;"                                               \
 126         "nand unlock;"                                                  \
 127         "saveenv;"
 128
 129 #define CONFIG_EXTRA_ENV_SETTINGS \
 130         DEFAULT_LINUX_BOOT_ENV \
 131         "mtdids=" MTDIDS_DEFAULT "\0"   \
 132         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 133         "mmcdev=0\0" \
 134         "mmcroot=/dev/mmcblk0p2 rw\0" \
 135         "mmcrootfstype=ext4 rootwait\0" \
 136         "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
 137         "nandrootfstype=ubifs rootwait\0" \
 138         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 139                         "if run loadbootscript; then " \
 140                                 "run bootscript; " \
 141                         "else " \
 142                                 "run defaultboot;" \
 143                         "fi; " \
 144                 "else run defaultboot; fi\0" \
 145         "defaultboot=run mmcramboot\0" \
 146         "consoledevice=ttyO0\0" \
 147         "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
 148         "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
 149         "rotation=0\0" \
 150         "vrfb_arg=if itest ${rotation} -ne 0; then " \
 151                 "setenv bootargs ${bootargs} omapfb.vrfb=y " \
 152                 "omapfb.rotate=${rotation}; " \
 153                 "fi\0" \
 154         "optargs=ignore_loglevel early_printk no_console_suspend\0" \
 155         "common_bootargs=run setconsole; setenv bootargs " \
 156                 "${bootargs} "\
 157                 "console=${console} " \
 158                 "${mtdparts} "\
 159                 "${optargs}; " \
 160                 "run vrfb_arg\0" \
 161         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 162         "bootscript=echo 'Running bootscript from mmc ...'; " \
 163                 "source ${loadaddr}\0" \
 164         "loadimage=mmc rescan; " \
 165                 "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
 166         "ramdisksize=64000\0" \
 167         "ramdiskimage=rootfs.ext2.gz.uboot\0" \
 168         "loadramdisk=mmc rescan; " \
 169                 "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
 170         "ramargs=setenv bootargs "\
 171                 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
 172         "mmcargs=setenv bootargs "\
 173                 "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
 174         "nandargs=setenv bootargs "\
 175                 "root=${nandroot} " \
 176                 "rootfstype=${nandrootfstype}\0" \
 177         "nfsargs=setenv serverip ${tftpserver}; " \
 178                 "setenv bootargs root=/dev/nfs " \
 179                 "nfsroot=${nfsrootpath} " \
 180                 "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
 181         "nfsrootpath=/opt/nfs-exports/omap\0" \
 182         "autoload=no\0" \
 183         "loadfdt=mmc rescan; " \
 184                 "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
 185         "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
 186                 "run mmcargs; " \
 187                 "run common_bootargs; " \
 188                 "run dump_bootargs; " \
 189                 "run loadimage; " \
 190                 "run loadfdt;\0 " \
 191         "mmcbootz=setenv bootfile zImage; " \
 192                 "run mmcbootcommon; "\
 193                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 194         "mmcboot=setenv bootfile uImage; "\
 195                 "run mmcbootcommon; "\
 196                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 197         "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
 198                 "run ramargs; " \
 199                 "run common_bootargs; " \
 200                 "run dump_bootargs; " \
 201                 "run loadimage; " \
 202                 "run loadfdt; " \
 203                 "run loadramdisk\0" \
 204         "mmcramboot=setenv bootfile uImage; " \
 205                 "run mmcrambootcommon; " \
 206                 "bootm ${loadaddr} ${rdaddr} ${fdtimage}\0" \
 207         "mmcrambootz=setenv bootfile zImage; " \
 208                 "run mmcrambootcommon; " \
 209                 "bootz ${loadaddr} ${rdaddr} ${fdtimage}\0" \
 210         "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
 211                 "run ramargs; " \
 212                 "run common_bootargs; " \
 213                 "run dump_bootargs; " \
 214                 "tftpboot ${loadaddr} ${zimage}; " \
 215                 "tftpboot ${rdaddr} ${ramdiskimage}; " \
 216                 "bootm ${loadaddr} ${rdaddr}\0" \
 217         "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
 218                 "dhcp;" \
 219                 "run nfsargs;" \
 220                 "run common_bootargs;" \
 221                 "run dump_bootargs;" \
 222                 "tftpboot $loadaddr zImage;" \
 223                 "bootz $loadaddr\0" \
 224         "nandbootcommon=echo 'Booting kernel from NAND...';" \
 225                 "nand unlock;" \
 226                 "run nandargs;" \
 227                 "run common_bootargs;" \
 228                 "run dump_bootargs;" \
 229                 "nand read ${loadaddr} kernel;" \
 230                 "nand read ${fdtaddr} spl-os;\0" \
 231         "nandbootz=run nandbootcommon; "\
 232                 "bootz ${loadaddr} - ${fdtaddr}\0"\
 233         "nandboot=run nandbootcommon; "\
 234                 "bootm ${loadaddr} - ${fdtaddr}\0"\
 235
 236 #define CONFIG_BOOTCOMMAND \
 237         "run autoboot"
 238
 239 /* Miscellaneous configurable options */
 240
 241 /* memtest works on */
 242 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 243 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 244                                         0x01F00000) /* 31MB */
 245
 246 /* FLASH and environment organization */
 247
 248 /* **** PISMO SUPPORT *** */
 249 #if defined(CONFIG_CMD_NAND)
 250 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 251 #endif
 252
 253 /* Monitor at start of flash */
 254 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 255
 256 #define CONFIG_ENV_IS_IN_NAND           1
 257 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
 258 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 259
 260 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 261 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 262 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 263
 264 /* SMSC922x Ethernet */
 265 #if defined(CONFIG_CMD_NET)
 266 #define CONFIG_SMC911X
 267 #define CONFIG_SMC911X_32_BIT
 268 #define CONFIG_SMC911X_BASE     0x08000000
 269 #endif /* (CONFIG_CMD_NET) */
 270
 271 /* Defines for SPL */
 272
 273 #define CONFIG_SPL_OMAP3_ID_NAND
 274
 275 /* NAND: SPL falcon mode configs */
 276 #ifdef CONFIG_SPL_OS_BOOT
 277 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 278 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 279 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 280 #endif
 281
 282 #endif /* __CONFIG_H */