include/configs/openrd.h

   1 /*
   2  * (C) Copyright 2009
   3  * Net Insight <www.netinsight.net>
   4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
   5  *
   6  * Based on sheevaplug.h:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef _CONFIG_OPENRD_H
  15 #define _CONFIG_OPENRD_H
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21 #define CONFIG_KW88F6281        1       /* SOC Name */
  22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
  23 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  24
  25 /*
  26  * Commands configuration
  27  */
  28 #define CONFIG_SYS_MVFS
  29 #define CONFIG_CMD_ENV
  30 #define CONFIG_CMD_NAND
  31 #define CONFIG_CMD_IDE
  32
  33 /*
  34  * mv-common.h should be defined after CMD configs since it used them
  35  * to enable certain macros
  36  */
  37 #include "mv-common.h"
  38
  39 /*
  40  *  Environment variables configurations
  41  */
  42 #ifdef CONFIG_CMD_NAND
  43 #define CONFIG_ENV_IS_IN_NAND           1
  44 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  45 #else
  46 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  47 #endif
  48 /*
  49  * max 4k env size is enough, but in case of nand
  50  * it has to be rounded to sector size
  51  */
  52 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  53 #define CONFIG_ENV_ADDR                 0x60000
  54 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  55 /*
  56  * Environment is right behind U-Boot in flash. Make sure U-Boot
  57  * doesn't grow into the environment area.
  58  */
  59 #define CONFIG_BOARD_SIZE_LIMIT         CONFIG_ENV_OFFSET
  60
  61 /*
  62  * Default environment variables
  63  */
  64 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  65         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  66         "${x_bootcmd_usb}; bootm 0x6400000;"
  67
  68 #define MTDIDS_DEFAULT          "nand0=nand_mtd"
  69 #define MTDPARTS_DEFAULT        "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
  70         "0x400000@0x100000(uImage),"\
  71         "0x1fb00000@0x500000(rootfs)"
  72
  73 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"            \
  74         "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
  75         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
  76         "x_bootcmd_usb=usb start\0"                                     \
  77         "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
  78         "mtdids="MTDIDS_DEFAULT"\0"                                     \
  79         "mtdparts="MTDPARTS_DEFAULT"\0"
  80
  81 /*
  82  * Ethernet Driver configuration
  83  */
  84 #ifdef CONFIG_CMD_NET
  85 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
  86 #  define CONFIG_MVGBE_PORTS    {1, 0}  /* enable port 0 only */
  87 # else
  88 #  define CONFIG_MVGBE_PORTS    {1, 1}  /* enable both ports */
  89 # endif
  90 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
  91 #  define CONFIG_PHY_BASE_ADR   0x0
  92 #  define PHY_NO                "88E1121"
  93 # else
  94 #  define CONFIG_PHY_BASE_ADR   0x8
  95 #  define PHY_NO                "88E1116"
  96 # endif
  97 #endif /* CONFIG_CMD_NET */
  98
  99 /*
 100  * SATA Driver configuration
 101  */
 102 #ifdef CONFIG_MVSATA_IDE
 103 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 104 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 105 #endif /*CONFIG_MVSATA_IDE*/
 106
 107 #ifdef CONFIG_CMD_MMC
 108 #define CONFIG_MVEBU_MMC
 109 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
 110 #endif /* CONFIG_CMD_MMC */
 111
 112 #endif /* _CONFIG_OPENRD_BASE_H */