include/configs/openrd.h

   1 /*
   2  * (C) Copyright 2009
   3  * Net Insight <www.netinsight.net>
   4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
   5  *
   6  * Based on sheevaplug.h:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef _CONFIG_OPENRD_H
  15 #define _CONFIG_OPENRD_H
  16
  17 /*
  18  * Version number information
  19  */
  20 #ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
  21 # define CONFIG_IDENT_STRING    "\nOpenRD-Ultimate"
  22 #else
  23 # ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
  24 #  define CONFIG_IDENT_STRING   "\nOpenRD-Client"
  25 # else
  26 #  ifdef CONFIG_BOARD_IS_OPENRD_BASE
  27 #   define CONFIG_IDENT_STRING  "\nOpenRD-Base"
  28 #  else
  29 #   error Unknown OpenRD board specified
  30 #  endif
  31 # endif
  32 #endif
  33
  34 /*
  35  * High Level Configuration Options (easy to change)
  36  */
  37 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  38 #define CONFIG_KW88F6281        1       /* SOC Name */
  39 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Commands configuration
  44  */
  45 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  46 #define CONFIG_SYS_MVFS
  47 #define CONFIG_CMD_DHCP
  48 #define CONFIG_CMD_ENV
  49 #define CONFIG_CMD_MII
  50 #define CONFIG_CMD_MMC
  51 #define CONFIG_CMD_NAND
  52 #define CONFIG_CMD_PING
  53 #define CONFIG_CMD_USB
  54 #define CONFIG_CMD_IDE
  55
  56 /*
  57  * mv-common.h should be defined after CMD configs since it used them
  58  * to enable certain macros
  59  */
  60 #include "mv-common.h"
  61
  62 /*
  63  *  Environment variables configurations
  64  */
  65 #ifdef CONFIG_CMD_NAND
  66 #define CONFIG_ENV_IS_IN_NAND           1
  67 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  68 #else
  69 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  70 #endif
  71 /*
  72  * max 4k env size is enough, but in case of nand
  73  * it has to be rounded to sector size
  74  */
  75 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  76 #define CONFIG_ENV_ADDR                 0x60000
  77 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  78 /*
  79  * Environment is right behind U-Boot in flash. Make sure U-Boot
  80  * doesn't grow into the environment area.
  81  */
  82 #define CONFIG_BOARD_SIZE_LIMIT         CONFIG_ENV_OFFSET
  83
  84 /*
  85  * Default environment variables
  86  */
  87 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  88         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  89         "${x_bootcmd_usb}; bootm 0x6400000;"
  90
  91 #define MTDIDS_DEFAULT          "nand0=nand_mtd"
  92 #define MTDPARTS_DEFAULT        "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
  93         "0x400000@0x100000(uImage),"\
  94         "0x1fb00000@0x500000(rootfs)"
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"            \
  97         "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
  98         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
  99         "x_bootcmd_usb=usb start\0"                                     \
 100         "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
 101         "mtdids="MTDIDS_DEFAULT"\0"                                     \
 102         "mtdparts="MTDPARTS_DEFAULT"\0"
 103
 104 /*
 105  * Ethernet Driver configuration
 106  */
 107 #ifdef CONFIG_CMD_NET
 108 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
 109 #  define CONFIG_MVGBE_PORTS    {1, 0}  /* enable port 0 only */
 110 # else
 111 #  define CONFIG_MVGBE_PORTS    {1, 1}  /* enable both ports */
 112 # endif
 113 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
 114 #  define CONFIG_PHY_BASE_ADR   0x0
 115 #  define PHY_NO                "88E1121"
 116 # else
 117 #  define CONFIG_PHY_BASE_ADR   0x8
 118 #  define PHY_NO                "88E1116"
 119 # endif
 120 #endif /* CONFIG_CMD_NET */
 121
 122 /*
 123  * SATA Driver configuration
 124  */
 125 #ifdef CONFIG_MVSATA_IDE
 126 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 127 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 128 #endif /*CONFIG_MVSATA_IDE*/
 129
 130 #ifdef CONFIG_CMD_MMC
 131 #define CONFIG_MMC
 132 #define CONFIG_GENERIC_MMC
 133 #define CONFIG_MVEBU_MMC
 134 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
 135 #endif /* CONFIG_CMD_MMC */
 136
 137 #endif /* _CONFIG_OPENRD_BASE_H */