include/configs/ot1200.h

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2014 Bachmann electronic GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* Size of malloc() pool */
  14 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  15
  16 #define CONFIG_BOARD_EARLY_INIT_F
  17 #define CONFIG_MISC_INIT_R
  18
  19 /* FUSE Configs */
  20 #define CONFIG_CMD_FUSE
  21 #define CONFIG_MXC_OCOTP
  22
  23 /* UART Configs */
  24 #define CONFIG_MXC_UART
  25 #define CONFIG_MXC_UART_BASE           UART1_BASE
  26
  27 /* SF Configs */
  28 #define CONFIG_CMD_SF
  29 #define CONFIG_SPI
  30 #define CONFIG_SPI_FLASH_STMICRO
  31 #define CONFIG_SPI_FLASH_WINBOND
  32 #define CONFIG_SPI_FLASH_MACRONIX
  33 #define CONFIG_SPI_FLASH_SST
  34 #define CONFIG_MXC_SPI
  35 #define CONFIG_SF_DEFAULT_BUS  2
  36 #define CONFIG_SF_DEFAULT_CS   0
  37 #define CONFIG_SF_DEFAULT_SPEED 25000000
  38 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  39
  40 /* IO expander */
  41 #define CONFIG_PCA953X
  42 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
  43 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
  44 #define CONFIG_CMD_PCA953X
  45 #define CONFIG_CMD_PCA953X_INFO
  46
  47 /* I2C Configs */
  48 #define CONFIG_CMD_I2C
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  52 #define CONFIG_SYS_I2C_SPEED            100000
  53
  54 /* OCOTP Configs */
  55 #define CONFIG_CMD_IMXOTP
  56 #define CONFIG_IMX_OTP
  57 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  58 #define IMX_OTP_ADDR_MAX                0x7F
  59 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  60 #define IMX_OTPWRITE_ENABLED
  61
  62 /* MMC Configs */
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  64 #define CONFIG_SYS_FSL_USDHC_NUM       2
  65
  66 /* USB Configs */
  67 #define CONFIG_CMD_USB
  68 #define CONFIG_USB_STORAGE
  69 #define CONFIG_USB_EHCI
  70 #define CONFIG_USB_EHCI_MX6
  71 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  72 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  73
  74 #ifdef CONFIG_MX6Q
  75 #define CONFIG_CMD_SATA
  76 #endif
  77
  78 /*
  79  * SATA Configs
  80  */
  81 #ifdef CONFIG_CMD_SATA
  82 #define CONFIG_DWC_AHSATA
  83 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  84 #define CONFIG_DWC_AHSATA_PORT_ID       0
  85 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  86 #define CONFIG_LBA48
  87 #define CONFIG_LIBATA
  88 #endif
  89
  90
  91 /* SPL */
  92 #ifdef CONFIG_SPL
  93 #include "imx6_spl.h"
  94 #define CONFIG_SPL_SPI_SUPPORT
  95 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  96 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  97 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
  98 #define CONFIG_SPL_SPI_LOAD
  99 #endif
 100
 101 #define CONFIG_CMD_PING
 102 #define CONFIG_CMD_DHCP
 103 #define CONFIG_CMD_MII
 104 #define CONFIG_FEC_MXC
 105 #define CONFIG_MII
 106 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 107 #define CONFIG_FEC_XCV_TYPE             MII100
 108 #define CONFIG_ETHPRIME                 "FEC"
 109 #define CONFIG_FEC_MXC_PHYADDR          0x5
 110 #define CONFIG_PHYLIB
 111 #define CONFIG_PHY_SMSC
 112
 113 #ifndef CONFIG_SPL
 114 #define CONFIG_CMD_EEPROM
 115 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 116 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 117 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 118 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 119 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 120 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 121 #endif
 122
 123 /* Miscellaneous commands */
 124 #define CONFIG_CMD_BMODE
 125
 126 #define CONFIG_PREBOOT                 ""
 127
 128 /* Print Buffer Size */
 129 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 130
 131 /* Physical Memory Map */
 132 #define CONFIG_NR_DRAM_BANKS           1
 133 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 134
 135 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 136 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 137 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 138
 139 #define CONFIG_SYS_INIT_SP_OFFSET \
 140         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 141 #define CONFIG_SYS_INIT_SP_ADDR \
 142         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 143
 144 /* Environment organization */
 145 #define CONFIG_ENV_IS_IN_SPI_FLASH
 146 #define CONFIG_ENV_SIZE                 (64 * 1024)     /* 64 kb */
 147 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 148 /* M25P16 has an erase size of 64 KiB */
 149 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 150 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 151 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 152 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 153 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 154
 155 #define CONFIG_BOOTP_SERVERIP
 156 #define CONFIG_BOOTP_BOOTFILE
 157
 158 #endif         /* __CONFIG_H */