include/configs/ot1200.h

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2014 Bachmann electronic GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* Size of malloc() pool */
  14 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  15
  16 #define CONFIG_BOARD_EARLY_INIT_F
  17 #define CONFIG_MISC_INIT_R
  18
  19 /* UART Configs */
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE           UART1_BASE
  22
  23 /* SF Configs */
  24 #define CONFIG_CMD_SF
  25 #define CONFIG_SPI
  26 #define CONFIG_SPI_FLASH_STMICRO
  27 #define CONFIG_SPI_FLASH_WINBOND
  28 #define CONFIG_SPI_FLASH_MACRONIX
  29 #define CONFIG_SPI_FLASH_SST
  30 #define CONFIG_MXC_SPI
  31 #define CONFIG_SF_DEFAULT_BUS  2
  32 #define CONFIG_SF_DEFAULT_CS   0
  33 #define CONFIG_SF_DEFAULT_SPEED 25000000
  34 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  35
  36 /* IO expander */
  37 #define CONFIG_PCA953X
  38 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
  39 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
  40 #define CONFIG_CMD_PCA953X
  41 #define CONFIG_CMD_PCA953X_INFO
  42
  43 /* I2C Configs */
  44 #define CONFIG_CMD_I2C
  45 #define CONFIG_SYS_I2C
  46 #define CONFIG_SYS_I2C_MXC
  47 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  48 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  49 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  50 #define CONFIG_SYS_I2C_SPEED            100000
  51
  52 /* OCOTP Configs */
  53 #define CONFIG_CMD_IMXOTP
  54 #define CONFIG_IMX_OTP
  55 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  56 #define IMX_OTP_ADDR_MAX                0x7F
  57 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  58 #define IMX_OTPWRITE_ENABLED
  59
  60 /* MMC Configs */
  61 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  62 #define CONFIG_SYS_FSL_USDHC_NUM       2
  63
  64 /* USB Configs */
  65 #define CONFIG_CMD_USB
  66 #define CONFIG_USB_STORAGE
  67 #define CONFIG_USB_EHCI
  68 #define CONFIG_USB_EHCI_MX6
  69 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  70 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  71
  72 #ifdef CONFIG_MX6Q
  73 #define CONFIG_CMD_SATA
  74 #endif
  75
  76 /*
  77  * SATA Configs
  78  */
  79 #ifdef CONFIG_CMD_SATA
  80 #define CONFIG_DWC_AHSATA
  81 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  82 #define CONFIG_DWC_AHSATA_PORT_ID       0
  83 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  84 #define CONFIG_LBA48
  85 #define CONFIG_LIBATA
  86 #endif
  87
  88
  89 /* SPL */
  90 #ifdef CONFIG_SPL
  91 #include "imx6_spl.h"
  92 #define CONFIG_SPL_SPI_SUPPORT
  93 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  94 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  95 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
  96 #define CONFIG_SPL_SPI_LOAD
  97 #endif
  98
  99 #define CONFIG_CMD_PING
 100 #define CONFIG_CMD_DHCP
 101 #define CONFIG_CMD_MII
 102 #define CONFIG_FEC_MXC
 103 #define CONFIG_MII
 104 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 105 #define CONFIG_FEC_XCV_TYPE             MII100
 106 #define CONFIG_ETHPRIME                 "FEC"
 107 #define CONFIG_FEC_MXC_PHYADDR          0x5
 108 #define CONFIG_PHYLIB
 109 #define CONFIG_PHY_SMSC
 110
 111 #ifndef CONFIG_SPL
 112 #define CONFIG_CMD_EEPROM
 113 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 114 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 116 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 117 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 118 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 119 #endif
 120
 121 /* Miscellaneous commands */
 122 #define CONFIG_CMD_BMODE
 123
 124 #define CONFIG_PREBOOT                 ""
 125
 126 /* Print Buffer Size */
 127 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 128
 129 /* Physical Memory Map */
 130 #define CONFIG_NR_DRAM_BANKS           1
 131 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 132
 133 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 134 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 135 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 136
 137 #define CONFIG_SYS_INIT_SP_OFFSET \
 138         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 139 #define CONFIG_SYS_INIT_SP_ADDR \
 140         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 141
 142 /* Environment organization */
 143 #define CONFIG_ENV_IS_IN_SPI_FLASH
 144 #define CONFIG_ENV_SIZE                 (64 * 1024)     /* 64 kb */
 145 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 146 /* M25P16 has an erase size of 64 KiB */
 147 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 148 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 149 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 150 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 151 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 152
 153 #define CONFIG_BOOTP_SERVERIP
 154 #define CONFIG_BOOTP_BOOTFILE
 155
 156 #endif         /* __CONFIG_H */