include/configs/p1_p2_rdb_pc.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ RDB boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #if defined(CONFIG_TARGET_P1020MBG)
  14 #define CONFIG_BOARDNAME "P1020MBG-PC"
  15 #define CONFIG_VSC7385_ENET
  16 #define CONFIG_SLIC
  17 #define __SW_BOOT_MASK          0x03
  18 #define __SW_BOOT_NOR           0xe4
  19 #define __SW_BOOT_SD            0x54
  20 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  21 #endif
  22
  23 #if defined(CONFIG_TARGET_P1020UTM)
  24 #define CONFIG_BOARDNAME "P1020UTM-PC"
  25 #define __SW_BOOT_MASK          0x03
  26 #define __SW_BOOT_NOR           0xe0
  27 #define __SW_BOOT_SD            0x50
  28 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  29 #endif
  30
  31 #if defined(CONFIG_TARGET_P1020RDB_PC)
  32 #define CONFIG_BOARDNAME "P1020RDB-PC"
  33 #define CONFIG_NAND_FSL_ELBC
  34 #define CONFIG_VSC7385_ENET
  35 #define CONFIG_SLIC
  36 #define __SW_BOOT_MASK          0x03
  37 #define __SW_BOOT_NOR           0x5c
  38 #define __SW_BOOT_SPI           0x1c
  39 #define __SW_BOOT_SD            0x9c
  40 #define __SW_BOOT_NAND          0xec
  41 #define __SW_BOOT_PCIE          0x6c
  42 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  43 #endif
  44
  45 /*
  46  * P1020RDB-PD board has user selectable switches for evaluating different
  47  * frequency and boot options for the P1020 device. The table that
  48  * follow describe the available options. The front six binary number was in
  49  * accordance with SW3[1:6].
  50  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
  51  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
  52  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
  53  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
  54  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
  55  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  56  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  57  */
  58 #if defined(CONFIG_TARGET_P1020RDB_PD)
  59 #define CONFIG_BOARDNAME "P1020RDB-PD"
  60 #define CONFIG_NAND_FSL_ELBC
  61 #define CONFIG_VSC7385_ENET
  62 #define CONFIG_SLIC
  63 #define __SW_BOOT_MASK          0x03
  64 #define __SW_BOOT_NOR           0x64
  65 #define __SW_BOOT_SPI           0x34
  66 #define __SW_BOOT_SD            0x24
  67 #define __SW_BOOT_NAND          0x44
  68 #define __SW_BOOT_PCIE          0x74
  69 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  70 /*
  71  * Dynamic MTD Partition support with mtdparts
  72  */
  73 #define CONFIG_MTD_DEVICE
  74 #define CONFIG_MTD_PARTITIONS
  75 #define CONFIG_CMD_MTDPARTS
  76 #define CONFIG_FLASH_CFI_MTD
  77 #define MTDIDS_DEFAULT "nor0=ec000000.nor"
  78 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
  79                         "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
  80 #endif
  81
  82 #if defined(CONFIG_TARGET_P1021RDB)
  83 #define CONFIG_BOARDNAME "P1021RDB-PC"
  84 #define CONFIG_NAND_FSL_ELBC
  85 #define CONFIG_QE
  86 #define CONFIG_VSC7385_ENET
  87 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
  88                                                 addresses in the LBC */
  89 #define __SW_BOOT_MASK          0x03
  90 #define __SW_BOOT_NOR           0x5c
  91 #define __SW_BOOT_SPI           0x1c
  92 #define __SW_BOOT_SD            0x9c
  93 #define __SW_BOOT_NAND          0xec
  94 #define __SW_BOOT_PCIE          0x6c
  95 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  96 /*
  97  * Dynamic MTD Partition support with mtdparts
  98  */
  99 #define CONFIG_MTD_DEVICE
 100 #define CONFIG_MTD_PARTITIONS
 101 #define CONFIG_CMD_MTDPARTS
 102 #define CONFIG_FLASH_CFI_MTD
 103 #ifdef CONFIG_PHYS_64BIT
 104 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
 105 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
 106                         "256k(dtb),4608k(kernel),9728k(fs)," \
 107                         "256k(qe-ucode-firmware),1280k(u-boot)"
 108 #else
 109 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
 110 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
 111                         "256k(dtb),4608k(kernel),9728k(fs)," \
 112                         "256k(qe-ucode-firmware),1280k(u-boot)"
 113 #endif
 114 #endif
 115
 116 #if defined(CONFIG_TARGET_P1024RDB)
 117 #define CONFIG_BOARDNAME "P1024RDB"
 118 #define CONFIG_NAND_FSL_ELBC
 119 #define CONFIG_SLIC
 120 #define __SW_BOOT_MASK          0xf3
 121 #define __SW_BOOT_NOR           0x00
 122 #define __SW_BOOT_SPI           0x08
 123 #define __SW_BOOT_SD            0x04
 124 #define __SW_BOOT_NAND          0x0c
 125 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 126 #endif
 127
 128 #if defined(CONFIG_TARGET_P1025RDB)
 129 #define CONFIG_BOARDNAME "P1025RDB"
 130 #define CONFIG_NAND_FSL_ELBC
 131 #define CONFIG_QE
 132 #define CONFIG_SLIC
 133
 134 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 135                                                 addresses in the LBC */
 136 #define __SW_BOOT_MASK          0xf3
 137 #define __SW_BOOT_NOR           0x00
 138 #define __SW_BOOT_SPI           0x08
 139 #define __SW_BOOT_SD            0x04
 140 #define __SW_BOOT_NAND          0x0c
 141 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 142 #endif
 143
 144 #if defined(CONFIG_TARGET_P2020RDB)
 145 #define CONFIG_BOARDNAME "P2020RDB-PC"
 146 #define CONFIG_NAND_FSL_ELBC
 147 #define CONFIG_P2020
 148 #define CONFIG_VSC7385_ENET
 149 #define __SW_BOOT_MASK          0x03
 150 #define __SW_BOOT_NOR           0xc8
 151 #define __SW_BOOT_SPI           0x28
 152 #define __SW_BOOT_SD            0x68 /* or 0x18 */
 153 #define __SW_BOOT_NAND          0xe8
 154 #define __SW_BOOT_PCIE          0xa8
 155 #define CONFIG_SYS_L2_SIZE      (512 << 10)
 156 /*
 157  * Dynamic MTD Partition support with mtdparts
 158  */
 159 #define CONFIG_MTD_DEVICE
 160 #define CONFIG_MTD_PARTITIONS
 161 #define CONFIG_CMD_MTDPARTS
 162 #define CONFIG_FLASH_CFI_MTD
 163 #ifdef CONFIG_PHYS_64BIT
 164 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
 165 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
 166                         "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 167 #else
 168 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
 169 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
 170                         "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 171 #endif
 172 #endif
 173
 174 #ifdef CONFIG_SDCARD
 175 #define CONFIG_SPL_MMC_MINIMAL
 176 #define CONFIG_SPL_FLUSH_IMAGE
 177 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 178 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 179 #define CONFIG_SYS_TEXT_BASE            0x11001000
 180 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 181 #define CONFIG_SPL_PAD_TO               0x20000
 182 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 183 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 184 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
 185 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
 186 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
 187 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 188 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 189 #define CONFIG_SPL_MMC_BOOT
 190 #ifdef CONFIG_SPL_BUILD
 191 #define CONFIG_SPL_COMMON_INIT_DDR
 192 #endif
 193 #endif
 194
 195 #ifdef CONFIG_SPIFLASH
 196 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 197 #define CONFIG_SPL_FLUSH_IMAGE
 198 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 199 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 200 #define CONFIG_SYS_TEXT_BASE            0x11001000
 201 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 202 #define CONFIG_SPL_PAD_TO               0x20000
 203 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 204 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
 205 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
 206 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
 207 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
 208 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 209 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 210 #define CONFIG_SPL_SPI_BOOT
 211 #ifdef CONFIG_SPL_BUILD
 212 #define CONFIG_SPL_COMMON_INIT_DDR
 213 #endif
 214 #endif
 215
 216 #ifdef CONFIG_NAND
 217 #ifdef CONFIG_TPL_BUILD
 218 #define CONFIG_SPL_NAND_BOOT
 219 #define CONFIG_SPL_FLUSH_IMAGE
 220 #define CONFIG_SPL_NAND_INIT
 221 #define CONFIG_SPL_COMMON_INIT_DDR
 222 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 223 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 224 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 225 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
 226 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 227 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 228 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 229 #elif defined(CONFIG_SPL_BUILD)
 230 #define CONFIG_SPL_INIT_MINIMAL
 231 #define CONFIG_SPL_FLUSH_IMAGE
 232 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 233 #define CONFIG_SPL_TEXT_BASE            0xff800000
 234 #define CONFIG_SPL_MAX_SIZE             4096
 235 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 236 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 237 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 238 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 239 #endif /* not CONFIG_TPL_BUILD */
 240
 241 #define CONFIG_SPL_PAD_TO               0x20000
 242 #define CONFIG_TPL_PAD_TO               0x20000
 243 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 244 #define CONFIG_SYS_TEXT_BASE            0x11001000
 245 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 246 #endif
 247
 248 #ifndef CONFIG_SYS_TEXT_BASE
 249 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 250 #endif
 251
 252 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 253 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 254 #endif
 255
 256 #ifndef CONFIG_SYS_MONITOR_BASE
 257 #ifdef CONFIG_SPL_BUILD
 258 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 259 #else
 260 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 261 #endif
 262 #endif
 263
 264 /* High Level Configuration Options */
 265 #define CONFIG_BOOKE
 266 #define CONFIG_E500
 267
 268 #define CONFIG_MP
 269
 270 #define CONFIG_FSL_ELBC
 271 #define CONFIG_PCIE1    /* PCIE controller 1 (slot 1) */
 272 #define CONFIG_PCIE2    /* PCIE controller 2 (slot 2) */
 273 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 274 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 275 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
 276 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 277
 278 #define CONFIG_FSL_LAW
 279 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
 280 #define CONFIG_ENV_OVERWRITE
 281
 282 #define CONFIG_CMD_SATA
 283 #define CONFIG_SATA_SIL
 284 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 285 #define CONFIG_LIBATA
 286 #define CONFIG_LBA48
 287
 288 #if defined(CONFIG_TARGET_P2020RDB)
 289 #define CONFIG_SYS_CLK_FREQ     100000000
 290 #else
 291 #define CONFIG_SYS_CLK_FREQ     66666666
 292 #endif
 293 #define CONFIG_DDR_CLK_FREQ     66666666
 294
 295 #define CONFIG_HWCONFIG
 296 /*
 297  * These can be toggled for performance analysis, otherwise use default.
 298  */
 299 #define CONFIG_L2_CACHE
 300 #define CONFIG_BTB
 301
 302 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 303
 304 #define CONFIG_ENABLE_36BIT_PHYS
 305
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_ADDR_MAP                 1
 308 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 309 #endif
 310
 311 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 312 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 313 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 314
 315 #define CONFIG_SYS_CCSRBAR              0xffe00000
 316 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 317
 318 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 319        SPL code*/
 320 #ifdef CONFIG_SPL_BUILD
 321 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 322 #endif
 323
 324 /* DDR Setup */
 325 #define CONFIG_SYS_FSL_DDR3
 326 #define CONFIG_SYS_DDR_RAW_TIMING
 327 #define CONFIG_DDR_SPD
 328 #define CONFIG_SYS_SPD_BUS_NUM 1
 329 #define SPD_EEPROM_ADDRESS 0x52
 330 #undef CONFIG_FSL_DDR_INTERACTIVE
 331
 332 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 333 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 334 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 335 #else
 336 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_1G
 337 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 338 #endif
 339 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 340 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 341 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 342
 343 #define CONFIG_NUM_DDR_CONTROLLERS      1
 344 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 345
 346 /* Default settings for DDR3 */
 347 #ifndef CONFIG_TARGET_P2020RDB
 348 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 349 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 350 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 351 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 352 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 353 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 354
 355 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 356 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 357 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 358 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 359
 360 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 361 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 362 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 363 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 364 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 365 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 366 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 367 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 368 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 369
 370 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 371 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 372 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 373 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 374 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 375 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 376 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 377 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 378 #endif
 379
 380 #undef CONFIG_CLOCKS_IN_MHZ
 381
 382 /*
 383  * Memory map
 384  *
 385  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 386  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 387  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 388  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 512K cacheable
 389  *   (early boot only)
 390  * 0xff80_0000 0xff80_7fff      NAND flash      32K non-cacheable       CS1/0
 391  * 0xff98_0000 0xff98_ffff      PMC             64K non-cacheable       CS2
 392  * 0xffa0_0000 0xffaf_ffff      CPLD            1M non-cacheable        CS3
 393  * 0xffb0_0000 0xffbf_ffff      VSC7385 switch  1M non-cacheable        CS2
 394  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 395  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 396  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 397  */
 398
 399 /*
 400  * Local Bus Definitions
 401  */
 402 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 403 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 404 #define CONFIG_SYS_FLASH_BASE           0xec000000
 405 #elif defined(CONFIG_TARGET_P1020UTM)
 406 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 407 #define CONFIG_SYS_FLASH_BASE           0xee000000
 408 #else
 409 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* 16M */
 410 #define CONFIG_SYS_FLASH_BASE           0xef000000
 411 #endif
 412
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 415 #else
 416 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 417 #endif
 418
 419 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 420         | BR_PS_16 | BR_V)
 421
 422 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 423
 424 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 425 #define CONFIG_SYS_FLASH_QUIET_TEST
 426 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 427
 428 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 429
 430 #undef CONFIG_SYS_FLASH_CHECKSUM
 431 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 432 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 433
 434 #define CONFIG_FLASH_CFI_DRIVER
 435 #define CONFIG_SYS_FLASH_CFI
 436 #define CONFIG_SYS_FLASH_EMPTY_INFO
 437 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 438
 439 /* Nand Flash */
 440 #ifdef CONFIG_NAND_FSL_ELBC
 441 #define CONFIG_SYS_NAND_BASE            0xff800000
 442 #ifdef CONFIG_PHYS_64BIT
 443 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 444 #else
 445 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 446 #endif
 447
 448 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 449 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 450 #define CONFIG_CMD_NAND
 451 #if defined(CONFIG_TARGET_P1020RDB_PD)
 452 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 453 #else
 454 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 455 #endif
 456
 457 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 458         | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 459         | BR_PS_8       /* Port Size = 8 bit */ \
 460         | BR_MS_FCM     /* MSEL = FCM */ \
 461         | BR_V) /* valid */
 462 #if defined(CONFIG_TARGET_P1020RDB_PD)
 463 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 464         | OR_FCM_PGS    /* Large Page*/ \
 465         | OR_FCM_CSCT \
 466         | OR_FCM_CST \
 467         | OR_FCM_CHT \
 468         | OR_FCM_SCY_1 \
 469         | OR_FCM_TRLX \
 470         | OR_FCM_EHTR)
 471 #else
 472 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB     /* small page */ \
 473         | OR_FCM_CSCT \
 474         | OR_FCM_CST \
 475         | OR_FCM_CHT \
 476         | OR_FCM_SCY_1 \
 477         | OR_FCM_TRLX \
 478         | OR_FCM_EHTR)
 479 #endif
 480 #endif /* CONFIG_NAND_FSL_ELBC */
 481
 482 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 483
 484 #define CONFIG_SYS_INIT_RAM_LOCK
 485 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 486 #ifdef CONFIG_PHYS_64BIT
 487 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 488 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 489 /* The assembler doesn't like typecast */
 490 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 491         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 492           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 493 #else
 494 /* Initial L1 address */
 495 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 496 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 497 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 498 #endif
 499 /* Size of used area in RAM */
 500 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 501
 502 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 503                                         GENERATED_GBL_DATA_SIZE)
 504 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 505
 506 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 507 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 508
 509 #define CONFIG_SYS_CPLD_BASE    0xffa00000
 510 #ifdef CONFIG_PHYS_64BIT
 511 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffa00000ull
 512 #else
 513 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 514 #endif
 515 /* CPLD config size: 1Mb */
 516 #define CONFIG_CPLD_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
 517                                         BR_PS_8 | BR_V)
 518 #define CONFIG_CPLD_OR_PRELIM   (0xfff009f7)
 519
 520 #define CONFIG_SYS_PMC_BASE     0xff980000
 521 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 522 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 523                                         BR_PS_8 | BR_V)
 524 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 525                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 526                                  OR_GPCM_EAD)
 527
 528 #ifdef CONFIG_NAND
 529 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 530 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 531 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 532 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 533 #else
 534 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 535 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 536 #ifdef CONFIG_NAND_FSL_ELBC
 537 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 538 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 539 #endif
 540 #endif
 541 #define CONFIG_SYS_BR3_PRELIM   CONFIG_CPLD_BR_PRELIM   /* CPLD Base Address */
 542 #define CONFIG_SYS_OR3_PRELIM   CONFIG_CPLD_OR_PRELIM   /* CPLD Options */
 543
 544 /* Vsc7385 switch */
 545 #ifdef CONFIG_VSC7385_ENET
 546 #define CONFIG_SYS_VSC7385_BASE         0xffb00000
 547
 548 #ifdef CONFIG_PHYS_64BIT
 549 #define CONFIG_SYS_VSC7385_BASE_PHYS    0xfffb00000ull
 550 #else
 551 #define CONFIG_SYS_VSC7385_BASE_PHYS    CONFIG_SYS_VSC7385_BASE
 552 #endif
 553
 554 #define CONFIG_SYS_VSC7385_BR_PRELIM    \
 555         (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
 556 #define CONFIG_SYS_VSC7385_OR_PRELIM    (OR_AM_128KB | OR_GPCM_CSNT | \
 557                         OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
 558                         OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
 559
 560 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_VSC7385_BR_PRELIM
 561 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_VSC7385_OR_PRELIM
 562
 563 /* The size of the VSC7385 firmware image */
 564 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 565 #endif
 566
 567 /*
 568  * Config the L2 Cache as L2 SRAM
 569 */
 570 #if defined(CONFIG_SPL_BUILD)
 571 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 572 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 573 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 574 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 575 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 576 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 577 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 578 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 579 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 580 #if defined(CONFIG_TARGET_P2020RDB)
 581 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (364 << 10)
 582 #else
 583 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 584 #endif
 585 #elif defined(CONFIG_NAND)
 586 #ifdef CONFIG_TPL_BUILD
 587 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 588 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 589 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 590 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 591 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 592 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 593 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 594 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 595 #else
 596 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 597 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 598 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 599 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 600 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 601 #endif /* CONFIG_TPL_BUILD */
 602 #endif
 603 #endif
 604
 605 /* Serial Port - controlled on board with jumper J8
 606  * open - index 2
 607  * shorted - index 1
 608  */
 609 #define CONFIG_CONS_INDEX               1
 610 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 611 #define CONFIG_SYS_NS16550_SERIAL
 612 #define CONFIG_SYS_NS16550_REG_SIZE     1
 613 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 614 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 615 #define CONFIG_NS16550_MIN_FUNCTIONS
 616 #endif
 617
 618 #define CONFIG_SYS_BAUDRATE_TABLE       \
 619         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 620
 621 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 622 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 623
 624 /* I2C */
 625 #define CONFIG_SYS_I2C
 626 #define CONFIG_SYS_I2C_FSL
 627 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 628 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 629 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 630 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 631 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 632 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 633 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 634 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 635 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 636
 637 /*
 638  * I2C2 EEPROM
 639  */
 640 #undef CONFIG_ID_EEPROM
 641
 642 #define CONFIG_RTC_PT7C4338
 643 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 644 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 645
 646 /* enable read and write access to EEPROM */
 647 #define CONFIG_CMD_EEPROM
 648 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 649 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 650 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 651
 652 /*
 653  * eSPI - Enhanced SPI
 654  */
 655 #define CONFIG_HARD_SPI
 656
 657 #if defined(CONFIG_SPI_FLASH)
 658 #define CONFIG_SF_DEFAULT_SPEED 10000000
 659 #define CONFIG_SF_DEFAULT_MODE  0
 660 #endif
 661
 662 #if defined(CONFIG_PCI)
 663 /*
 664  * General PCI
 665  * Memory space is mapped 1-1, but I/O space must start from 0.
 666  */
 667
 668 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 669 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT"
 670 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 671 #ifdef CONFIG_PHYS_64BIT
 672 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 673 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 674 #else
 675 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 676 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 677 #endif
 678 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 679 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 680 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 681 #ifdef CONFIG_PHYS_64BIT
 682 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 683 #else
 684 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 685 #endif
 686 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 687
 688 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 689 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 690 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 691 #ifdef CONFIG_PHYS_64BIT
 692 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 693 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 694 #else
 695 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 696 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 697 #endif
 698 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 699 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 700 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 701 #ifdef CONFIG_PHYS_64BIT
 702 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 703 #else
 704 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 705 #endif
 706 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 707
 708 #define CONFIG_CMD_PCI
 709
 710 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 711 #define CONFIG_DOS_PARTITION
 712 #endif /* CONFIG_PCI */
 713
 714 #if defined(CONFIG_TSEC_ENET)
 715 #define CONFIG_MII              /* MII PHY management */
 716 #define CONFIG_TSEC1
 717 #define CONFIG_TSEC1_NAME       "eTSEC1"
 718 #define CONFIG_TSEC2
 719 #define CONFIG_TSEC2_NAME       "eTSEC2"
 720 #define CONFIG_TSEC3
 721 #define CONFIG_TSEC3_NAME       "eTSEC3"
 722
 723 #define TSEC1_PHY_ADDR  2
 724 #define TSEC2_PHY_ADDR  0
 725 #define TSEC3_PHY_ADDR  1
 726
 727 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 728 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 729 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 730
 731 #define TSEC1_PHYIDX    0
 732 #define TSEC2_PHYIDX    0
 733 #define TSEC3_PHYIDX    0
 734
 735 #define CONFIG_ETHPRIME "eTSEC1"
 736
 737 #define CONFIG_PHY_GIGE 1       /* Include GbE speed/duplex detection */
 738
 739 #define CONFIG_HAS_ETH0
 740 #define CONFIG_HAS_ETH1
 741 #define CONFIG_HAS_ETH2
 742 #endif /* CONFIG_TSEC_ENET */
 743
 744 #ifdef CONFIG_QE
 745 /* QE microcode/firmware address */
 746 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 747 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 748 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 749 #endif /* CONFIG_QE */
 750
 751 #ifdef CONFIG_TARGET_P1025RDB
 752 /*
 753  * QE UEC ethernet configuration
 754  */
 755 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 756
 757 #undef CONFIG_UEC_ETH
 758 #define CONFIG_PHY_MODE_NEED_CHANGE
 759
 760 #define CONFIG_UEC_ETH1 /* ETH1 */
 761 #define CONFIG_HAS_ETH0
 762
 763 #ifdef CONFIG_UEC_ETH1
 764 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 765 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 766 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 767 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 768 #define CONFIG_SYS_UEC1_PHY_ADDR        0x0     /* 0x0 for MII */
 769 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 770 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 771 #endif /* CONFIG_UEC_ETH1 */
 772
 773 #define CONFIG_UEC_ETH5 /* ETH5 */
 774 #define CONFIG_HAS_ETH1
 775
 776 #ifdef CONFIG_UEC_ETH5
 777 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 778 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 779 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 780 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 781 #define CONFIG_SYS_UEC5_PHY_ADDR        0x3     /* 0x3 for RMII */
 782 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 783 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 784 #endif /* CONFIG_UEC_ETH5 */
 785 #endif /* CONFIG_TARGET_P1025RDB */
 786
 787 /*
 788  * Environment
 789  */
 790 #ifdef CONFIG_SPIFLASH
 791 #define CONFIG_ENV_IS_IN_SPI_FLASH
 792 #define CONFIG_ENV_SPI_BUS      0
 793 #define CONFIG_ENV_SPI_CS       0
 794 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 795 #define CONFIG_ENV_SPI_MODE     0
 796 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 797 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 798 #define CONFIG_ENV_SECT_SIZE    0x10000
 799 #elif defined(CONFIG_SDCARD)
 800 #define CONFIG_ENV_IS_IN_MMC
 801 #define CONFIG_FSL_FIXED_MMC_LOCATION
 802 #define CONFIG_ENV_SIZE         0x2000
 803 #define CONFIG_SYS_MMC_ENV_DEV  0
 804 #elif defined(CONFIG_NAND)
 805 #ifdef CONFIG_TPL_BUILD
 806 #define CONFIG_ENV_SIZE         0x2000
 807 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 808 #else
 809 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 810 #endif
 811 #define CONFIG_ENV_IS_IN_NAND
 812 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 813 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 814 #elif defined(CONFIG_SYS_RAMBOOT)
 815 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 816 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 817 #define CONFIG_ENV_SIZE         0x2000
 818 #else
 819 #define CONFIG_ENV_IS_IN_FLASH
 820 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 821 #define CONFIG_ENV_SIZE         0x2000
 822 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 823 #endif
 824
 825 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 826 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 827
 828 /*
 829  * Command line configuration.
 830  */
 831 #define CONFIG_CMD_IRQ
 832 #define CONFIG_CMD_DATE
 833 #define CONFIG_CMD_REGINFO
 834
 835 /*
 836  * USB
 837  */
 838 #define CONFIG_HAS_FSL_DR_USB
 839
 840 #if defined(CONFIG_HAS_FSL_DR_USB)
 841 #define CONFIG_USB_EHCI
 842
 843 #ifdef CONFIG_USB_EHCI
 844 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 845 #define CONFIG_USB_EHCI_FSL
 846 #endif
 847 #endif
 848
 849 #if defined(CONFIG_TARGET_P1020RDB_PD)
 850 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 851 #endif
 852
 853 #define CONFIG_MMC
 854
 855 #ifdef CONFIG_MMC
 856 #define CONFIG_FSL_ESDHC
 857 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 858 #define CONFIG_GENERIC_MMC
 859 #endif
 860
 861 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 862                  || defined(CONFIG_FSL_SATA)
 863 #define CONFIG_DOS_PARTITION
 864 #endif
 865
 866 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 867
 868 /*
 869  * Miscellaneous configurable options
 870  */
 871 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 872 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 873 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 874 #if defined(CONFIG_CMD_KGDB)
 875 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 876 #else
 877 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 878 #endif
 879 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 880         /* Print Buffer Size */
 881 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 882 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 883
 884 /*
 885  * For booting Linux, the board info and command line data
 886  * have to be in the first 64 MB of memory, since this is
 887  * the maximum mapped by the Linux kernel during initialization.
 888  */
 889 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 890 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 891
 892 #if defined(CONFIG_CMD_KGDB)
 893 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 894 #endif
 895
 896 /*
 897  * Environment Configuration
 898  */
 899 #define CONFIG_HOSTNAME         unknown
 900 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 901 #define CONFIG_BOOTFILE         "uImage"
 902 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 903
 904 /* default location for tftp and bootm */
 905 #define CONFIG_LOADADDR 1000000
 906
 907 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
 908
 909 #define CONFIG_BAUDRATE 115200
 910
 911 #ifdef __SW_BOOT_NOR
 912 #define __NOR_RST_CMD   \
 913 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
 914 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 915 #endif
 916 #ifdef __SW_BOOT_SPI
 917 #define __SPI_RST_CMD   \
 918 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
 919 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 920 #endif
 921 #ifdef __SW_BOOT_SD
 922 #define __SD_RST_CMD    \
 923 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
 924 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 925 #endif
 926 #ifdef __SW_BOOT_NAND
 927 #define __NAND_RST_CMD  \
 928 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
 929 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 930 #endif
 931 #ifdef __SW_BOOT_PCIE
 932 #define __PCIE_RST_CMD  \
 933 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
 934 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 935 #endif
 936
 937 #define CONFIG_EXTRA_ENV_SETTINGS       \
 938 "netdev=eth0\0" \
 939 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 940 "loadaddr=1000000\0"    \
 941 "bootfile=uImage\0"     \
 942 "tftpflash=tftpboot $loadaddr $uboot; " \
 943         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 944         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
 945         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 946         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 947         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
 948 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
 949 "consoledev=ttyS0\0"    \
 950 "ramdiskaddr=2000000\0" \
 951 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 952 "fdtaddr=1e00000\0"     \
 953 "bdev=sda1\0" \
 954 "jffs2nor=mtdblock3\0"  \
 955 "norbootaddr=ef080000\0"        \
 956 "norfdtaddr=ef040000\0" \
 957 "jffs2nand=mtdblock9\0" \
 958 "nandbootaddr=100000\0" \
 959 "nandfdtaddr=80000\0"           \
 960 "ramdisk_size=120000\0" \
 961 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
 962 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
 963 __stringify(__NOR_RST_CMD)"\0" \
 964 __stringify(__SPI_RST_CMD)"\0" \
 965 __stringify(__SD_RST_CMD)"\0" \
 966 __stringify(__NAND_RST_CMD)"\0" \
 967 __stringify(__PCIE_RST_CMD)"\0"
 968
 969 #define CONFIG_NFSBOOTCOMMAND   \
 970 "setenv bootargs root=/dev/nfs rw "     \
 971 "nfsroot=$serverip:$rootpath "  \
 972 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 973 "console=$consoledev,$baudrate $othbootargs;" \
 974 "tftp $loadaddr $bootfile;"     \
 975 "tftp $fdtaddr $fdtfile;"       \
 976 "bootm $loadaddr - $fdtaddr"
 977
 978 #define CONFIG_HDBOOT   \
 979 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 980 "console=$consoledev,$baudrate $othbootargs;" \
 981 "usb start;"    \
 982 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 983 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 984 "bootm $loadaddr - $fdtaddr"
 985
 986 #define CONFIG_USB_FAT_BOOT     \
 987 "setenv bootargs root=/dev/ram rw "     \
 988 "console=$consoledev,$baudrate $othbootargs " \
 989 "ramdisk_size=$ramdisk_size;"   \
 990 "usb start;"    \
 991 "fatload usb 0:2 $loadaddr $bootfile;"  \
 992 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 993 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 994 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 995
 996 #define CONFIG_USB_EXT2_BOOT    \
 997 "setenv bootargs root=/dev/ram rw "     \
 998 "console=$consoledev,$baudrate $othbootargs " \
 999 "ramdisk_size=$ramdisk_size;"   \
1000 "usb start;"    \
1001 "ext2load usb 0:4 $loadaddr $bootfile;" \
1002 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
1003 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
1004 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1005
1006 #define CONFIG_NORBOOT  \
1007 "setenv bootargs root=/dev/$jffs2nor rw "       \
1008 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
1009 "bootm $norbootaddr - $norfdtaddr"
1010
1011 #define CONFIG_RAMBOOTCOMMAND   \
1012 "setenv bootargs root=/dev/ram rw "     \
1013 "console=$consoledev,$baudrate $othbootargs " \
1014 "ramdisk_size=$ramdisk_size;"   \
1015 "tftp $ramdiskaddr $ramdiskfile;"       \
1016 "tftp $loadaddr $bootfile;"     \
1017 "tftp $fdtaddr $fdtfile;"       \
1018 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1019
1020 #define CONFIG_BOOTCOMMAND      CONFIG_HDBOOT
1021
1022 #endif /* __CONFIG_H */