include/configs/platinum.h

   1 /*
   2  * Copyright (C) 2014, Barco (www.barco.com)
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __PLATINUM_CONFIG_H__
   8 #define __PLATINUM_CONFIG_H__
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13
  14 /* Location in NAND to read U-Boot from */
  15 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  16
  17 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  18 #include "mx6_common.h"
  19
  20 /*
  21  * Console configuration
  22  */
  23
  24 #define CONFIG_CMD_BMODE
  25 #define CONFIG_CMD_DHCP
  26 #define CONFIG_CMD_EXT2
  27 #define CONFIG_CMD_FAT
  28 #define CONFIG_CMD_FUSE
  29 #define CONFIG_CMD_I2C
  30 #define CONFIG_CMD_MII
  31 #define CONFIG_CMD_MMC
  32 #define CONFIG_CMD_MTDPARTS
  33 #define CONFIG_CMD_NAND
  34 #define CONFIG_CMD_NAND_TRIMFFS
  35 #define CONFIG_CMD_NET
  36 #define CONFIG_CMD_PING
  37 #define CONFIG_CMD_TIME
  38 #define CONFIG_CMD_UBI
  39 #define CONFIG_CMD_UBIFS
  40 #define CONFIG_CMD_USB
  41
  42 /*
  43  * Hardware configuration
  44  */
  45
  46 /* UART config */
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE                    UART1_BASE
  49 #define CONFIG_BAUDRATE                         115200
  50 #define CONFIG_CONS_INDEX                       1
  51
  52 /* I2C config */
  53 #define CONFIG_SYS_I2C
  54 #define CONFIG_SYS_I2C_MXC
  55 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  56 #define CONFIG_SYS_I2C_SPEED                    100000
  57
  58 /* MMC config */
  59 #define CONFIG_FSL_ESDHC
  60 #define CONFIG_FSL_USDHC
  61 #define CONFIG_SYS_FSL_ESDHC_ADDR               0
  62 #define CONFIG_SYS_FSL_USDHC_NUM                1
  63 #define CONFIG_MMC
  64 #define CONFIG_GENERIC_MMC
  65 #define CONFIG_BOUNCE_BUFFER
  66 #define CONFIG_DOS_PARTITION
  67
  68 /* Ethernet config */
  69 #define CONFIG_FEC_MXC
  70 #define CONFIG_MII
  71 #define IMX_FEC_BASE                            ENET_BASE_ADDR
  72
  73 #define CONFIG_PHYLIB
  74
  75 /* USB config */
  76 #define CONFIG_USB_EHCI
  77 #define CONFIG_USB_EHCI_MX6
  78 #define CONFIG_USB_STORAGE
  79 #define CONFIG_MXC_USB_PORT                     1
  80 #define CONFIG_MXC_USB_PORTSC                   (PORT_PTS_UTMI | PORT_PTS_PTW)
  81 #define CONFIG_MXC_USB_FLAGS                    0
  82
  83 /* Memory config */
  84 #define CONFIG_NR_DRAM_BANKS                    1
  85 #define PHYS_SDRAM                              MMDC0_ARB_BASE_ADDR
  86 #ifndef PHYS_SDRAM_SIZE
  87 #define PHYS_SDRAM_SIZE                         (1024 << 20)
  88 #endif
  89
  90 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM
  91 #define CONFIG_SYS_INIT_RAM_ADDR                IRAM_BASE_ADDR
  92 #define CONFIG_SYS_INIT_RAM_SIZE                IRAM_SIZE
  93
  94 #define CONFIG_SYS_INIT_SP_OFFSET               (CONFIG_SYS_INIT_RAM_SIZE - \
  95                                                  GENERATED_GBL_DATA_SIZE)
  96 #define CONFIG_SYS_INIT_SP_ADDR                 (CONFIG_SYS_INIT_RAM_ADDR + \
  97                                                  CONFIG_SYS_INIT_SP_OFFSET)
  98
  99 #define CONFIG_SYS_MALLOC_LEN                   (16 * 1024 * 1024)
 100
 101 #ifdef CONFIG_CMD_NAND
 102
 103 /* NAND config */
 104 #define CONFIG_NAND_MXS
 105 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
 106 #define CONFIG_SYS_NAND_MAX_CHIPS               2
 107 #endif
 108 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 109 #define CONFIG_SYS_NAND_BASE                    0x40000000
 110 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 111 #define CONFIG_SYS_NAND_ONFI_DETECTION
 112
 113 /* DMA config, needed for GPMI/MXS NAND support */
 114 #define CONFIG_APBH_DMA
 115 #define CONFIG_APBH_DMA_BURST
 116 #define CONFIG_APBH_DMA_BURST8
 117
 118 /* Fuse support */
 119 #define CONFIG_MXC_OCOTP
 120
 121 /* Environment in NAND */
 122 #define CONFIG_ENV_IS_IN_NAND
 123 #define CONFIG_ENV_OFFSET               (16 << 20)
 124 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
 125 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 126 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + (512 << 10))
 127 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 128
 129 #else /* CONFIG_CMD_NAND */
 130
 131 /* Environment in MMC */
 132 #define CONFIG_ENV_SIZE                 (8 << 10)
 133 #define CONFIG_ENV_IS_IN_MMC
 134 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 135 #define CONFIG_SYS_MMC_ENV_DEV          0
 136
 137 #endif /* CONFIG_CMD_NAND */
 138
 139 /*
 140  * U-Boot configuration
 141  */
 142
 143 /* Board startup config */
 144 #define CONFIG_BOARD_EARLY_INIT_F
 145 #define CONFIG_MISC_INIT_R
 146
 147 /* allow to overwrite serial and ethaddr */
 148 #define CONFIG_ENV_OVERWRITE
 149
 150 /* Device tree support */
 151 #define CONFIG_OF_LIBFDT
 152
 153 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
 154 #define CONFIG_SYS_MEMTEST_END                  (CONFIG_SYS_MEMTEST_START + \
 155                                                  PHYS_SDRAM_SIZE - (12 << 20))
 156
 157 #define CONFIG_BOOTCOMMAND                      "run bootubi_scr"
 158
 159 /* Miscellaneous configurable options */
 160 #define CONFIG_SYS_LONGHELP
 161 #define CONFIG_SYS_HUSH_PARSER
 162
 163 #define CONFIG_AUTO_COMPLETE
 164 #define CONFIG_CMDLINE_EDITING
 165 #define CONFIG_PREBOOT
 166
 167 #define CONFIG_SYS_CBSIZE                       256
 168
 169 /* Print Buffer Size */
 170 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
 171                                                  sizeof(CONFIG_SYS_PROMPT) + 16)
 172 #define CONFIG_SYS_MAXARGS                      16
 173 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 174
 175 /* MTD/UBI/UBIFS config */
 176 #define CONFIG_LZO
 177 #define CONFIG_MTD_DEVICE
 178 #define CONFIG_MTD_PARTITIONS
 179 #define CONFIG_RBTREE
 180
 181 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
 182 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
 183 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
 184                                 "512k(env1),512k(env2),-(ubi)"
 185 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
 186 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
 187 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
 188                                 "512k(env1),512k(env2),495M(ubi0)," \
 189                                 "14M(res0),2M(res1)," \
 190                                 "512k(res2),512k(res3),-(ubi1)"
 191 #endif
 192
 193 #ifndef CONFIG_SYS_DCACHE_OFF
 194 #define CONFIG_CMD_CACHE
 195 #endif
 196
 197 /*
 198  * Environment configuration
 199  */
 200
 201 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
 202 #define CONFIG_COMMON_ENV_UBI                                           \
 203         "setubipartition=env set ubipartition ubi\0"                    \
 204         "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
 205 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
 206 #define CONFIG_COMMON_ENV_UBI                                           \
 207         "setubipartition=env set ubipartition ubi$boot_vol\0"           \
 208         "setubirfs=env set ubirfs ubi0:rootfs\0"
 209 #endif
 210
 211 #define CONFIG_COMMON_ENV_MISC                                          \
 212         "user=user\0"                                                   \
 213         "project="CONFIG_PLATINUM_PROJECT"\0"                           \
 214         "uimage=uImage\0"                                               \
 215         "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
 216         "serverip=serverip\0"                                           \
 217         "memaddrlinux=0x10800000\0"                                     \
 218         "memaddrsrc=0x11000000\0"                                       \
 219         "memaddrdtb=0x12000000\0"                                       \
 220         "console=ttymxc0\0"                                             \
 221         "baudrate=115200\0"                                             \
 222         "boot_scr=boot.uboot\0"                                         \
 223         "boot_vol=0\0"                                                  \
 224         "mtdids="MTDIDS_DEFAULT"\0"                                     \
 225         "mtdparts="MTDPARTS_DEFAULT"\0"                                 \
 226         "mmcfs=ext2\0"                                                  \
 227         "mmcrootpart=1\0"                                               \
 228         \
 229         "setnfspath=env set nfspath /home/nfs/$user/$project/root\0"    \
 230         "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
 231         "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"      \
 232         "setubifilelinux=env set ubifilelinux boot/$uimage\0"           \
 233         "setubipfiledtb=env set ubifiledtb boot/$dtb\0"                 \
 234         "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"  \
 235         "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"          \
 236         "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"                 \
 237         \
 238         "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"            \
 239         "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"                   \
 240         "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"         \
 241         "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"                \
 242         "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "  \
 243                 "$mmcfilelinux\0"                                       \
 244         "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "       \
 245                 "$mmcfiledtb\0"                                         \
 246         \
 247         "ubipart=ubi part $ubipartition\0"                              \
 248         "ubimount=ubifsmount $ubirfs\0"                                 \
 249         \
 250         "setbootargscommon=env set bootargs $bootargs "                 \
 251                 "console=$console,$baudrate enable_wait_mode=off\0"     \
 252         "setbootargsmtd=env set bootargs $bootargs $mtdparts\0"         \
 253         "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"          \
 254         "setbootargsubirfs=env set bootargs $bootargs "                 \
 255                 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
 256         "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "   \
 257                 "nfsroot=$serverip:$nfspath,v3,tcp\0"                   \
 258         "setbootargsmmcrfs=env set bootargs $bootargs "                 \
 259                 "root=$mmcrootdev rootwait rw\0"                        \
 260         \
 261         "bootnet=run settftpfilelinux settftpfiledtb setnfspath "       \
 262                 "setbootargscommon setbootargsmtd setbootargsdhcp "     \
 263                         "setbootargsnfsrfs;"                            \
 264                         "run loadtftpkernel loadtftpdtb;"               \
 265                         "bootm $memaddrlinux - $memaddrdtb\0"           \
 266         "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"           \
 267                         "run setubipartition setubirfs;"                \
 268                         "run setbootargscommon setbootargsmtd "         \
 269                                 "setbootargsubirfs;"                    \
 270                         "run loadtftpkernel loadtftpdtb;"               \
 271                         "bootm $memaddrlinux - $memaddrdtb\0"           \
 272         "bootubi=run setubipartition setubirfs setubifilelinux "        \
 273                                 "setubipfiledtb;"                       \
 274                         "run setbootargscommon setbootargsmtd "         \
 275                                 "setbootargsubirfs;"                    \
 276                         "run ubipart ubimount loadubikernel loadubidtb;" \
 277                         "bootm $memaddrlinux - $memaddrdtb\0"           \
 278         "bootubi_scr=run setubipartition setubirfs;"                    \
 279                         "run ubipart ubimount;"                         \
 280                         "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
 281                         "then source ${memaddrsrc}; else run bootubi; fi\0" \
 282         "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "      \
 283                         "setbootargscommon setbootargsmmcrfs;"          \
 284                         "run loadmmckernel loadmmcdtb;"                 \
 285                         "bootm $memaddrlinux - $memaddrdtb\0"           \
 286         \
 287         "bootcmd="CONFIG_BOOTCOMMAND"\0"
 288
 289 #define CONFIG_COMMON_ENV_SETTINGS                      CONFIG_COMMON_ENV_MISC \
 290                                                         CONFIG_COMMON_ENV_UBI
 291 #endif /* __PLATINUM_CONFIG_H__ */