include/configs/qemu-mips.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_MISC_INIT_R
  19
  20 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
  21
  22 #define CONFIG_BAUDRATE         115200
  23
  24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  25 #undef CONFIG_BOOTARGS
  26
  27 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  28         "addmisc=setenv bootargs ${bootargs} "                          \
  29                 "console=ttyS0,${baudrate} "                            \
  30                 "panic=1\0"                                             \
  31         "bootfile=/tftpboot/vmlinux\0"                          \
  32         "load=tftp 80500000 ${u-boot}\0"                                \
  33         ""
  34
  35 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  36
  37 /*
  38  * BOOTP options
  39  */
  40 #define CONFIG_BOOTP_BOOTFILESIZE
  41 #define CONFIG_BOOTP_BOOTPATH
  42 #define CONFIG_BOOTP_GATEWAY
  43 #define CONFIG_BOOTP_HOSTNAME
  44
  45 /*
  46  * Command line configuration.
  47  */
  48
  49 #define CONFIG_DRIVER_NE2000
  50 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
  51
  52 #define CONFIG_SYS_NS16550_SERIAL
  53 #define CONFIG_SYS_NS16550_REG_SIZE     1
  54 #define CONFIG_SYS_NS16550_CLK          115200
  55 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
  56 #define CONFIG_CONS_INDEX               1
  57
  58 #define CONFIG_CMD_IDE
  59 #define CONFIG_DOS_PARTITION
  60
  61 #ifdef CONFIG_SYS_BIG_ENDIAN
  62 #define CONFIG_IDE_SWAP_IO
  63 #endif
  64
  65 #define CONFIG_SYS_IDE_MAXBUS           2
  66 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  67 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  68 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  69 #define CONFIG_SYS_ATA_REG_OFFSET       0
  70 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  71
  72 #define CONFIG_SYS_IDE_MAXDEVICE        4
  73
  74 /*
  75  * Miscellaneous configurable options
  76  */
  77 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  78
  79 #define CONFIG_AUTO_COMPLETE
  80 #define CONFIG_CMDLINE_EDITING
  81
  82 /* Console I/O Buffer Size */
  83 #define CONFIG_SYS_CBSIZE               256
  84 /* Print Buffer Size */
  85 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  86 /* max number of command args */
  87 #define CONFIG_SYS_MAXARGS              16
  88
  89 #define CONFIG_SYS_MALLOC_LEN           128*1024
  90
  91 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  92
  93 #define CONFIG_SYS_MHZ                  132
  94
  95 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
  96
  97 /* Cached addr */
  98 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  99
 100 /* default load address */
 101 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 102
 103 #define CONFIG_SYS_MEMTEST_START        0x80100000
 104 #define CONFIG_SYS_MEMTEST_END          0x80800000
 105
 106 /*-----------------------------------------------------------------------
 107  * FLASH and environment organization
 108  */
 109 /* The following #defines are needed to get flash environment right */
 110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 111 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 112
 113 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 114
 115 /* We boot from this flash, selected with dip switch */
 116 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
 117 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 118 #define CONFIG_SYS_MAX_FLASH_SECT       128
 119 #define CONFIG_SYS_FLASH_CFI
 120 #define CONFIG_FLASH_CFI_DRIVER
 121 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 122
 123 #define CONFIG_ENV_IS_IN_FLASH
 124 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 125
 126 /* Address and size of Primary Environment Sector */
 127 #define CONFIG_ENV_SIZE         0x8000
 128
 129 #define CONFIG_ENV_OVERWRITE    1
 130
 131 #define MEM_SIZE                128
 132
 133 #define CONFIG_LZMA
 134
 135 #endif /* __CONFIG_H */