]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/rk3288_common.h
Merge git://git.denx.de/u-boot-fdt
[people/ms/u-boot.git] / include / configs / rk3288_common.h
1 /*
2 * (C) Copyright 2015 Google, Inc
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __CONFIG_RK3288_COMMON_H
8 #define __CONFIG_RK3288_COMMON_H
9
10 #include <asm/arch/hardware.h>
11
12 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
13 #define CONFIG_SYS_NO_FLASH
14 #define CONFIG_NR_DRAM_BANKS 1
15 #define CONFIG_ENV_SIZE 0x2000
16 #define CONFIG_SYS_MAXARGS 16
17 #define CONFIG_BAUDRATE 115200
18 #define CONFIG_SYS_MALLOC_LEN (32 << 20)
19 #define CONFIG_SYS_CBSIZE 1024
20 #define CONFIG_SYS_THUMB_BUILD
21
22 #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
23 #define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
24 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
25
26 #define CONFIG_SPL_FRAMEWORK
27 #define CONFIG_SYS_NS16550_MEM32
28 #define CONFIG_SPL_BOARD_INIT
29
30 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
31 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
32 #define CONFIG_SYS_TEXT_BASE 0x00000000
33 #else
34 #define CONFIG_SYS_TEXT_BASE 0x00100000
35 #endif
36 #define CONFIG_SYS_INIT_SP_ADDR 0x00100000
37 #define CONFIG_SYS_LOAD_ADDR 0x00800800
38 #define CONFIG_SPL_STACK 0xff718000
39 #define CONFIG_SPL_TEXT_BASE 0xff704004
40
41 /* MMC/SD IP block */
42 #define CONFIG_MMC
43 #define CONFIG_GENERIC_MMC
44 #define CONFIG_DWMMC
45 #define CONFIG_BOUNCE_BUFFER
46
47 #define CONFIG_FAT_WRITE
48 #define CONFIG_PARTITION_UUIDS
49 #define CONFIG_CMD_PART
50
51 /* RAW SD card / eMMC locations. */
52 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
53 #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
54
55 /* FAT sd card locations. */
56 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
57 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
58
59 #define CONFIG_SYS_SDRAM_BASE 0
60 #define CONFIG_NR_DRAM_BANKS 1
61 #define SDRAM_BANK_SIZE (2UL << 30)
62
63 #define CONFIG_SPI_FLASH
64 #define CONFIG_SPI
65 #define CONFIG_SF_DEFAULT_SPEED 20000000
66
67 #ifndef CONFIG_SPL_BUILD
68 /* usb otg */
69 #define CONFIG_USB_GADGET
70 #define CONFIG_USB_GADGET_DUALSPEED
71 #define CONFIG_USB_GADGET_DWC2_OTG
72 #define CONFIG_ROCKCHIP_USB2_PHY
73 #define CONFIG_USB_GADGET_VBUS_DRAW 0
74
75 /* fastboot */
76 #define CONFIG_CMD_FASTBOOT
77 #define CONFIG_USB_FUNCTION_FASTBOOT
78 #define CONFIG_FASTBOOT_FLASH
79 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */
80 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
81 #define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
82
83 /* usb mass storage */
84 #define CONFIG_USB_FUNCTION_MASS_STORAGE
85 #define CONFIG_CMD_USB_MASS_STORAGE
86
87 #define CONFIG_USB_GADGET_DOWNLOAD
88 #define CONFIG_G_DNL_MANUFACTURER "Rockchip"
89 #define CONFIG_G_DNL_VENDOR_NUM 0x2207
90 #define CONFIG_G_DNL_PRODUCT_NUM 0x320a
91
92 /* Enable gpt partition table */
93 #define CONFIG_CMD_GPT
94
95 #include <config_distro_defaults.h>
96
97 #define ENV_MEM_LAYOUT_SETTINGS \
98 "scriptaddr=0x00000000\0" \
99 "pxefile_addr_r=0x00100000\0" \
100 "fdt_addr_r=0x01f00000\0" \
101 "kernel_addr_r=0x02000000\0" \
102 "ramdisk_addr_r=0x04000000\0"
103
104 #define CONFIG_RANDOM_UUID
105 #define PARTS_DEFAULT \
106 "uuid_disk=${uuid_gpt_disk};" \
107 "name=boot,start=8M,size=64M,bootable,uuid=${uuid_gpt_boot};" \
108 "name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
109
110 /* First try to boot from SD (index 0), then eMMC (index 1 */
111 #define BOOT_TARGET_DEVICES(func) \
112 func(MMC, mmc, 0) \
113 func(MMC, mmc, 1)
114
115 #include <config_distro_bootcmd.h>
116
117 /* Linux fails to load the fdt if it's loaded above 512M on a Rock 2 board, so
118 * limit the fdt reallocation to that */
119 #define CONFIG_EXTRA_ENV_SETTINGS \
120 "fdt_high=0x1fffffff\0" \
121 "initrd_high=0x1fffffff\0" \
122 "partitions=" PARTS_DEFAULT \
123 ENV_MEM_LAYOUT_SETTINGS \
124 ROCKCHIP_DEVICE_SETTINGS \
125 BOOTENV
126 #endif
127
128 #define CONFIG_BOARD_LATE_INIT
129 #define CONFIG_PREBOOT
130
131 #endif