include/configs/sheevaplug.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef _CONFIG_SHEEVAPLUG_H
  10 #define _CONFIG_SHEEVAPLUG_H
  11
  12 /*
  13  * Version number information
  14  */
  15 #define CONFIG_IDENT_STRING     "\nMarvell-Sheevaplug"
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  21 #define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  22 #define CONFIG_KW88F6281        1       /* SOC Name */
  23 #define CONFIG_MACH_SHEEVAPLUG  /* Machine type */
  24 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  25
  26 /*
  27  * Commands configuration
  28  */
  29 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  30 #include <config_cmd_default.h>
  31 #define CONFIG_CMD_DHCP
  32 #define CONFIG_CMD_ENV
  33 #define CONFIG_CMD_MII
  34 #define CONFIG_CMD_NAND
  35 #define CONFIG_CMD_PING
  36 #define CONFIG_CMD_USB
  37 /*
  38  * mv-common.h should be defined after CMD configs since it used them
  39  * to enable certain macros
  40  */
  41 #include "mv-common.h"
  42
  43 /*
  44  *  Environment variables configurations
  45  */
  46 #ifdef CONFIG_CMD_NAND
  47 #define CONFIG_ENV_IS_IN_NAND           1
  48 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  49 #else
  50 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  51 #endif
  52 /*
  53  * max 4k env size is enough, but in case of nand
  54  * it has to be rounded to sector size
  55  */
  56 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  57 #define CONFIG_ENV_ADDR                 0x60000
  58 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  59
  60 /*
  61  * Default environment variables
  62  */
  63 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  64         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  65         "${x_bootcmd_usb}; bootm 0x6400000;"
  66
  67 #define CONFIG_MTDPARTS         "orion_nand:512k(uboot),"       \
  68         "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"    \
  71         "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS        \
  72         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
  73         "x_bootcmd_usb=usb start\0" \
  74         "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
  75
  76 /*
  77  * Ethernet Driver configuration
  78  */
  79 #ifdef CONFIG_CMD_NET
  80 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  81 #define CONFIG_PHY_BASE_ADR     0
  82 #endif /* CONFIG_CMD_NET */
  83
  84 /*
  85  * File system
  86  */
  87 #define CONFIG_CMD_EXT2
  88 #define CONFIG_CMD_FAT
  89 #define CONFIG_CMD_JFFS2
  90 #define CONFIG_CMD_UBI
  91 #define CONFIG_CMD_UBIFS
  92 #define CONFIG_RBTREE
  93 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
  94 #define CONFIG_MTD_PARTITIONS
  95 #define CONFIG_CMD_MTDPARTS
  96 #define CONFIG_LZO
  97
  98 #endif /* _CONFIG_SHEEVAPLUG_H */