include/configs/sheevaplug.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef _CONFIG_SHEEVAPLUG_H
  10 #define _CONFIG_SHEEVAPLUG_H
  11
  12 /*
  13  * Version number information
  14  */
  15 #define CONFIG_IDENT_STRING     "\nMarvell-Sheevaplug"
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  21 #define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  22 #define CONFIG_KW88F6281        1       /* SOC Name */
  23 #define CONFIG_MACH_SHEEVAPLUG  /* Machine type */
  24 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  25
  26 /*
  27  * Commands configuration
  28  */
  29 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  30 #include <config_cmd_default.h>
  31 #define CONFIG_CMD_DHCP
  32 #define CONFIG_CMD_ENV
  33 #define CONFIG_CMD_MII
  34 #define CONFIG_CMD_MMC
  35 #define CONFIG_CMD_NAND
  36 #define CONFIG_CMD_PING
  37 #define CONFIG_CMD_USB
  38 /*
  39  * mv-common.h should be defined after CMD configs since it used them
  40  * to enable certain macros
  41  */
  42 #include "mv-common.h"
  43
  44 /*
  45  *  Environment variables configurations
  46  */
  47 #ifdef CONFIG_CMD_NAND
  48 #define CONFIG_ENV_IS_IN_NAND           1
  49 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  50 #else
  51 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  52 #endif
  53 /*
  54  * max 4k env size is enough, but in case of nand
  55  * it has to be rounded to sector size
  56  */
  57 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  58 #define CONFIG_ENV_ADDR                 0x60000
  59 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  60
  61 /*
  62  * Default environment variables
  63  */
  64 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  65         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  66         "${x_bootcmd_usb}; bootm 0x6400000;"
  67
  68 #define CONFIG_MTDPARTS         "orion_nand:512k(uboot),"       \
  69         "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
  70
  71 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"    \
  72         "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS        \
  73         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
  74         "x_bootcmd_usb=usb start\0" \
  75         "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
  76
  77 /*
  78  * Ethernet Driver configuration
  79  */
  80 #ifdef CONFIG_CMD_NET
  81 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  82 #define CONFIG_PHY_BASE_ADR     0
  83 #endif /* CONFIG_CMD_NET */
  84
  85 /*
  86  * SDIO/MMC Card Configuration
  87  */
  88 #ifdef CONFIG_CMD_MMC
  89 #define CONFIG_MMC
  90 #define CONFIG_GENERIC_MMC
  91 #define CONFIG_MVEBU_MMC
  92 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
  93 #endif /* CONFIG_CMD_MMC */
  94
  95 /*
  96  * File system
  97  */
  98 #define CONFIG_CMD_EXT2
  99 #define CONFIG_CMD_FAT
 100 #define CONFIG_CMD_JFFS2
 101 #define CONFIG_CMD_UBI
 102 #define CONFIG_CMD_UBIFS
 103 #define CONFIG_RBTREE
 104 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 105 #define CONFIG_MTD_PARTITIONS
 106 #define CONFIG_CMD_MTDPARTS
 107 #define CONFIG_LZO
 108
 109 #endif /* _CONFIG_SHEEVAPLUG_H */