]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/sniper.h
2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
25 #define CONFIG_MISC_INIT_R
31 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
32 #define CONFIG_SYS_PTV 2
34 #define V_NS16550_CLK 48000000
35 #define V_OSCK 26000000
36 #define V_SCLK (V_OSCK >> 1)
42 #define CONFIG_NR_DRAM_BANKS 2
43 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
44 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
50 #define CONFIG_SYS_SDRAM_BASE 0x80000000
51 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
52 GENERATED_GBL_DATA_SIZE)
54 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
60 #define CONFIG_SYS_I2C
61 #define CONFIG_I2C_MULTI_BUS
67 #define CONFIG_TWL4030_INPUT
73 #define CONFIG_SPL_FRAMEWORK
75 #define CONFIG_SPL_TEXT_BASE 0x40200000
76 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
78 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
79 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
80 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
81 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
82 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
84 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
85 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
87 #define CONFIG_AUTO_COMPLETE
89 #define CONFIG_SYS_LONGHELP
91 #define CONFIG_SYS_CBSIZE 512
97 #ifdef CONFIG_SPL_BUILD
98 #define CONFIG_SYS_NS16550_SERIAL
99 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
102 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
103 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
104 #define CONFIG_CONS_INDEX 3
106 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
113 #define CONFIG_ENV_SIZE (128 * 1024)
115 #define CONFIG_ENV_OVERWRITE
117 #define CONFIG_EXTRA_ENV_SETTINGS \
118 "kernel_addr_r=0x82000000\0" \
119 "loadaddr=0x82000000\0" \
120 "fdt_addr_r=0x88000000\0" \
121 "fdtaddr=0x88000000\0" \
122 "ramdisk_addr_r=0x88080000\0" \
123 "pxefile_addr_r=0x80100000\0" \
124 "scriptaddr=0x80000000\0" \
125 "bootm_size=0x10000000\0" \
127 "kernel_mmc_part=3\0" \
128 "recovery_mmc_part=4\0" \
129 "fdtfile=omap3-sniper.dtb\0" \
130 "bootfile=/boot/extlinux/extlinux.conf\0" \
131 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
137 #define CONFIG_SETUP_MEMORY_TAGS
138 #define CONFIG_CMDLINE_TAG
139 #define CONFIG_INITRD_TAG
140 #define CONFIG_REVISION_TAG
141 #define CONFIG_SERIAL_TAG
147 #define CONFIG_SYS_LOAD_ADDR 0x82000000
149 #define CONFIG_BOOTCOMMAND \
150 "setenv boot_mmc_part ${kernel_mmc_part}; " \
151 "if test reboot-${reboot-mode} = reboot-r; then " \
152 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
153 "if test reboot-${reboot-mode} = reboot-b; then " \
154 "echo fastboot; fastboot 0; fi; " \
155 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
156 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
157 "mmc dev ${boot_mmc_dev}; " \
158 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
159 "bootm ${kernel_addr_r};"
165 #include <config_defaults.h>
166 #include <config_distro_defaults.h>