include/configs/socrates.h

   1 /*
   2  * (C) Copyright 2008
   3  * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
   4  *
   5  * Wolfgang Denk <wd@denx.de>
   6  * Copyright 2004 Freescale Semiconductor.
   7  * (C) Copyright 2002,2003 Motorola,Inc.
   8  * Xianghua Xiao <X.Xiao@motorola.com>
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 /*
  30  * Socrates
  31  */
  32
  33 #ifndef __CONFIG_H
  34 #define __CONFIG_H
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE            1       /* BOOKE                        */
  38 #define CONFIG_E500             1       /* BOOKE e500 family            */
  39 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41             */
  40 #define CONFIG_MPC8544          1
  41 #define CONFIG_SOCRATES         1
  42
  43 #define CONFIG_PCI
  44
  45 #define CONFIG_TSEC_ENET                /* tsec ethernet support        */
  46
  47 #define CONFIG_MISC_INIT_R      1       /* Call misc_init_r             */
  48 #define CONFIG_BOARD_EARLY_INIT_R 1     /* Call board_early_init_r      */
  49
  50 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  51
  52 /*
  53  * Only possible on E500 Version 2 or newer cores.
  54  */
  55 #define CONFIG_ENABLE_36BIT_PHYS        1
  56
  57 /*
  58  * sysclk for MPC85xx
  59  *
  60  * Two valid values are:
  61  *    33000000
  62  *    66000000
  63  *
  64  * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
  65  * is likely the desired value here, so that is now the default.
  66  * The board, however, can run at 66MHz.  In any event, this value
  67  * must match the settings of some switches.  Details can be found
  68  * in the README.mpc85xxads.
  69  */
  70
  71 #ifndef CONFIG_SYS_CLK_FREQ
  72 #define CONFIG_SYS_CLK_FREQ     66666666
  73 #endif
  74
  75 /*
  76  * These can be toggled for performance analysis, otherwise use default.
  77  */
  78 #define CONFIG_L2_CACHE                 /* toggle L2 cache              */
  79 #define CONFIG_BTB                      /* toggle branch predition      */
  80 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming        */
  81
  82 #define CFG_INIT_DBCR DBCR_IDM          /* Enable Debug Exceptions      */
  83
  84 #undef  CFG_DRAM_TEST                   /* memory test, takes time      */
  85 #define CFG_MEMTEST_START       0x00000000
  86 #define CFG_MEMTEST_END         0x10000000
  87
  88 /*
  89  * Base addresses -- Note these are effective addresses where the
  90  * actual resources get mapped (not physical addresses)
  91  */
  92 #define CFG_CCSRBAR_DEFAULT     0xFF700000      /* CCSRBAR Default      */
  93 #define CFG_CCSRBAR             0xE0000000      /* relocated CCSRBAR    */
  94 #define CFG_CCSRBAR_PHYS        CFG_CCSRBAR     /* physical addr of CCSRBAR */
  95 #define CFG_IMMR                CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
  96
  97 /* DDR Setup */
  98 #define CONFIG_FSL_DDR2
  99 #undef CONFIG_FSL_DDR_INTERACTIVE
 100 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 101 #define CONFIG_DDR_SPD
 102
 103 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER        /* DDR controller or DMA? */
 104 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 105
 106 #define CFG_DDR_SDRAM_BASE      0x00000000
 107 #define CFG_SDRAM_BASE          CFG_DDR_SDRAM_BASE
 108 #define CONFIG_VERY_BIG_RAM
 109
 110 #define CONFIG_NUM_DDR_CONTROLLERS      1
 111 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 112 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 113
 114 /* I2C addresses of SPD EEPROMs */
 115 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 116
 117 #define CONFIG_DDR_DEFAULT_CL   30              /* CAS latency 3        */
 118
 119 /* Hardcoded values, to use instead of SPD */
 120 #define CFG_DDR_CS0_BNDS                0x0000000f
 121 #define CFG_DDR_CS0_CONFIG              0x80010102
 122 #define CFG_DDR_TIMING_0                0x00260802
 123 #define CFG_DDR_TIMING_1                0x3935D322
 124 #define CFG_DDR_TIMING_2                0x14904CC8
 125 #define CFG_DDR_MODE                    0x00480432
 126 #define CFG_DDR_INTERVAL                0x030C0100
 127 #define CFG_DDR_CONFIG_2                0x04400000
 128 #define CFG_DDR_CONFIG                  0xC3008000
 129 #define CFG_DDR_CLK_CONTROL             0x03800000
 130 #define CFG_SDRAM_SIZE                  256 /* in Megs */
 131
 132 /*
 133  * Flash on the LocalBus
 134  */
 135 #define CFG_LBC_CACHE_BASE      0xf0000000      /* Localbus cacheable    */
 136
 137 #define CFG_FLASH0              0xFE000000
 138 #define CFG_FLASH1              0xFC000000
 139 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH1, CFG_FLASH0 }
 140
 141 #define CFG_LBC_FLASH_BASE      CFG_FLASH1      /* Localbus flash start */
 142 #define CFG_FLASH_BASE          CFG_LBC_FLASH_BASE /* start of FLASH    */
 143
 144 #define CFG_BR0_PRELIM          0xfe001001      /* port size 16bit      */
 145 #define CFG_OR0_PRELIM          0xfe000030      /* 32MB Flash           */
 146 #define CFG_BR1_PRELIM          0xfc001001      /* port size 16bit      */
 147 #define CFG_OR1_PRELIM          0xfe000030      /* 32MB Flash           */
 148
 149 #define CFG_FLASH_CFI                           /* flash is CFI compat. */
 150 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver*/
 151
 152 #define CFG_MAX_FLASH_BANKS     2               /* number of banks      */
 153 #define CFG_MAX_FLASH_SECT      256             /* sectors per device   */
 154 #undef  CFG_FLASH_CHECKSUM
 155 #define CFG_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms)     */
 156 #define CFG_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms)     */
 157
 158 #define CFG_MONITOR_BASE        TEXT_BASE       /* start of monitor     */
 159
 160 #define CFG_LBC_LCRR            0x00030004    /* LB clock ratio reg     */
 161 #define CFG_LBC_LBCR            0x00000000    /* LB config reg          */
 162 #define CFG_LBC_LSRT            0x20000000    /* LB sdram refresh timer */
 163 #define CFG_LBC_MRTPR           0x20000000    /* LB refresh timer presc.*/
 164
 165 #define CONFIG_L1_INIT_RAM
 166 #define CFG_INIT_RAM_LOCK       1
 167 #define CFG_INIT_RAM_ADDR       0xe4010000      /* Initial RAM address  */
 168 #define CFG_INIT_RAM_END        0x4000          /* End used area in RAM */
 169
 170 #define CFG_GBL_DATA_SIZE       128             /* num bytes initial data*/
 171 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 172 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 173
 174 #define CFG_MONITOR_LEN         (256 * 1024)    /* Reserve 256kB for Mon */
 175 #define CFG_MALLOC_LEN          (4 << 20)       /* Reserve 4 MB for malloc */
 176
 177 /* FPGA and NAND */
 178 #define CFG_FPGA_BASE           0xc0000000
 179 #define CFG_FPGA_SIZE           0x00100000      /* 1 MB         */
 180 #define CFG_HMI_BASE            0xc0010000
 181 #define CFG_BR3_PRELIM          0xc0001881      /* UPMA, 32-bit */
 182 #define CFG_OR3_PRELIM          0xfff00000      /* 1 MB         */
 183
 184 #define CFG_NAND_BASE           (CFG_FPGA_BASE + 0x70)
 185 #define CFG_MAX_NAND_DEVICE     1
 186 #define NAND_MAX_CHIPS          1
 187 #define CONFIG_CMD_NAND
 188
 189 /* LIME GDC */
 190 #define CFG_LIME_BASE           0xc8000000
 191 #define CFG_LIME_SIZE           0x04000000      /* 64 MB        */
 192 #define CFG_BR2_PRELIM          0xc80018a1      /* UPMB, 32-bit */
 193 #define CFG_OR2_PRELIM          0xfc000000      /* 64 MB        */
 194
 195 #define CONFIG_VIDEO
 196 #define CONFIG_VIDEO_MB862xx
 197 #define CONFIG_CFB_CONSOLE
 198 #define CONFIG_VIDEO_LOGO
 199 #define CONFIG_VIDEO_BMP_LOGO
 200 #define CONFIG_CONSOLE_EXTRA_INFO
 201 #define VIDEO_FB_16BPP_PIXEL_SWAP
 202 #define CONFIG_VGA_AS_SINGLE_DEVICE
 203 #define CFG_CONSOLE_IS_IN_ENV
 204 #define CONFIG_VIDEO_SW_CURSOR
 205 #define CONFIG_SPLASH_SCREEN
 206 #define CONFIG_VIDEO_BMP_GZIP
 207 #define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20)       /* decompressed img */
 208
 209 /* Serial Port */
 210
 211 #define CONFIG_CONS_INDEX     1
 212 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 213 #define CFG_NS16550
 214 #define CFG_NS16550_SERIAL
 215 #define CFG_NS16550_REG_SIZE    1
 216 #define CFG_NS16550_CLK         get_bus_freq(0)
 217
 218 #define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
 219 #define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
 220
 221 #define CONFIG_BAUDRATE         115200
 222
 223 #define CFG_BAUDRATE_TABLE  \
 224         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 225
 226 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 227 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 228 #ifdef  CFG_HUSH_PARSER
 229 #define CFG_PROMPT_HUSH_PS2     "> "
 230 #endif
 231
 232
 233 /*
 234  * I2C
 235  */
 236 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 237 #define CONFIG_HARD_I2C                 /* I2C with hardware support    */
 238 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 239 #define CFG_I2C_SPEED           102124  /* I2C speed and slave address  */
 240 #define CFG_I2C_SLAVE           0x7F
 241 #define CFG_I2C_OFFSET          0x3000
 242
 243 #define CONFIG_I2C_MULTI_BUS
 244 #define CONFIG_I2C_CMD_TREE
 245 #define CFG_I2C2_OFFSET         0x3100
 246
 247 /* I2C RTC */
 248 #define CONFIG_RTC_RX8025               /* Use Epson rx8025 rtc via i2c */
 249 #define CFG_I2C_RTC_ADDR        0x32    /* at address 0x32              */
 250
 251 /* I2C W83782G HW-Monitoring IC */
 252 #define CFG_I2C_W83782G_ADDR    0x28    /* W83782G address              */
 253
 254 /* I2C temp sensor */
 255 /* Socrates uses Maxim's        DS75, which is compatible with LM75 */
 256 #define CONFIG_DTT_LM75         1
 257 #define CONFIG_DTT_SENSORS      {4}             /* Sensor addresses     */
 258 #define CFG_DTT_MAX_TEMP        125
 259 #define CFG_DTT_LOW_TEMP        -55
 260 #define CFG_DTT_HYSTERESIS      3
 261 #define CFG_EEPROM_PAGE_WRITE_ENABLE    /* necessary for the LM75 chip */
 262 #define CFG_EEPROM_PAGE_WRITE_BITS      4
 263
 264 /*
 265  * General PCI
 266  * Memory space is mapped 1-1.
 267  */
 268 #define CFG_PCI_PHYS            0x80000000      /* 1G PCI TLB */
 269
 270 /* PCI is clocked by the external source at 33 MHz */
 271 #define CONFIG_PCI_CLK_FREQ     33000000
 272 #define CFG_PCI1_MEM_BASE       0x80000000
 273 #define CFG_PCI1_MEM_PHYS       CFG_PCI1_MEM_BASE
 274 #define CFG_PCI1_MEM_SIZE       0x20000000      /* 512M                 */
 275 #define CFG_PCI1_IO_BASE        0xE2000000
 276 #define CFG_PCI1_IO_PHYS        CFG_PCI1_IO_BASE
 277 #define CFG_PCI1_IO_SIZE        0x01000000      /* 16M                  */
 278
 279 #if defined(CONFIG_PCI)
 280 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 281 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup  */
 282 #endif  /* CONFIG_PCI */
 283
 284
 285 #define CONFIG_NET_MULTI        1
 286 #define CONFIG_MII              1       /* MII PHY management */
 287 #define CONFIG_TSEC1    1
 288 #define CONFIG_TSEC1_NAME       "TSEC0"
 289 #define CONFIG_TSEC3    1
 290 #define CONFIG_TSEC3_NAME       "TSEC1"
 291 #undef CONFIG_MPC85XX_FEC
 292
 293 #define TSEC1_PHY_ADDR          0
 294 #define TSEC3_PHY_ADDR          1
 295
 296 #define TSEC1_PHYIDX            0
 297 #define TSEC3_PHYIDX            0
 298 #define TSEC1_FLAGS             TSEC_GIGABIT
 299 #define TSEC3_FLAGS             TSEC_GIGABIT
 300
 301 /* Options are: TSEC[0,1] */
 302 #define CONFIG_ETHPRIME         "TSEC0"
 303 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 304
 305 #define CONFIG_HAS_ETH0
 306 #define CONFIG_HAS_ETH1
 307
 308 /*
 309  * Environment
 310  */
 311 #define CONFIG_ENV_IS_IN_FLASH  1
 312 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env     */
 313 #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 314 #define CONFIG_ENV_SIZE         0x4000
 315 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 316 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 317
 318 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 319 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 320
 321 #define CONFIG_TIMESTAMP                /* Print image info with ts     */
 322
 323
 324 /*
 325  * BOOTP options
 326  */
 327 #define CONFIG_BOOTP_BOOTFILESIZE
 328 #define CONFIG_BOOTP_BOOTPATH
 329 #define CONFIG_BOOTP_GATEWAY
 330 #define CONFIG_BOOTP_HOSTNAME
 331
 332
 333 /*
 334  * Command line configuration.
 335  */
 336 #include <config_cmd_default.h>
 337
 338 #define CONFIG_CMD_DATE
 339 #define CONFIG_CMD_DHCP
 340 #define CONFIG_CMD_DTT
 341 #undef CONFIG_CMD_EEPROM
 342 #define CONFIG_CMD_I2C
 343 #define CONFIG_CMD_SDRAM
 344 #define CONFIG_CMD_MII
 345 #define CONFIG_CMD_NFS
 346 #define CONFIG_CMD_PING
 347 #define CONFIG_CMD_SNTP
 348 #define CONFIG_CMD_USB
 349 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 350 #define CONFIG_CMD_BMP
 351
 352 #if defined(CONFIG_PCI)
 353     #define CONFIG_CMD_PCI
 354 #endif
 355
 356 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 357
 358 /*
 359  * Miscellaneous configurable options
 360  */
 361 #define CFG_LONGHELP                    /* undef to save memory         */
 362 #define CFG_LOAD_ADDR   0x2000000       /* default load address         */
 363 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
 364
 365 #if defined(CONFIG_CMD_KGDB)
 366     #define CFG_CBSIZE  1024            /* Console I/O Buffer Size      */
 367 #else
 368     #define CFG_CBSIZE  256             /* Console I/O Buffer Size      */
 369 #endif
 370
 371 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size */
 372 #define CFG_MAXARGS     16              /* max number of command args   */
 373 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 374 #define CFG_HZ          1000            /* decrementer freq: 1ms ticks  */
 375
 376 /*
 377  * For booting Linux, the board info and command line data
 378  * have to be in the first 8 MB of memory, since this is
 379  * the maximum mapped by the Linux kernel during initialization.
 380  */
 381 #define CFG_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux */
 382
 383 /*
 384  * Internal Definitions
 385  *
 386  * Boot Flags
 387  */
 388 #define BOOTFLAG_COLD   0x01            /* Power-On: Boot from FLASH    */
 389 #define BOOTFLAG_WARM   0x02            /* Software reboot              */
 390
 391 #if defined(CONFIG_CMD_KGDB)
 392 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port*/
 393 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use     */
 394 #endif
 395
 396
 397 #define CONFIG_LOADADDR  200000         /* default addr for tftp & bootm*/
 398
 399 #define CONFIG_BOOTDELAY 1              /* -1 disables auto-boot        */
 400
 401 #define CONFIG_PREBOOT  "echo;" \
 402         "echo Welcome on the ABB Socrates Board;" \
 403         "echo"
 404
 405 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs   */
 406
 407 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 408         "netdev=eth0\0"                                                 \
 409         "consdev=ttyS0\0"                                               \
 410         "uboot_file=/home/tftp/syscon3/u-boot.bin\0"                    \
 411         "bootfile=/home/tftp/syscon3/uImage\0"                          \
 412         "fdt_file=/home/tftp/syscon3/socrates.dtb\0"                    \
 413         "initrd_file=/home/tftp/syscon3/uinitrd.gz\0"                   \
 414         "uboot_addr=FFFA0000\0"                                         \
 415         "kernel_addr=FE000000\0"                                        \
 416         "fdt_addr=FE1E0000\0"                                           \
 417         "ramdisk_addr=FE200000\0"                                       \
 418         "fdt_addr_r=B00000\0"                                           \
 419         "kernel_addr_r=200000\0"                                        \
 420         "ramdisk_addr_r=400000\0"                                       \
 421         "rootpath=/opt/eldk/ppc_85xxDP\0"                               \
 422         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 423         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 424                 "nfsroot=$serverip:$rootpath\0"                         \
 425         "addcons=setenv bootargs $bootargs "                            \
 426                 "console=$consdev,$baudrate\0"                          \
 427         "addip=setenv bootargs $bootargs "                              \
 428                 "ip=$ipaddr:$serverip:$gatewayip:$netmask"              \
 429                 ":$hostname:$netdev:off panic=1\0"                      \
 430         "boot_nor=run ramargs addcons;"                                 \
 431                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 432         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 433                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 434                 "run nfsargs addip addcons;"                            \
 435                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 436         "update_uboot=tftp 100000 ${uboot_file};"                       \
 437                 "protect off fffa0000 ffffffff;"                        \
 438                 "era fffa0000 ffffffff;"                                \
 439                 "cp.b 100000 fffa0000 ${filesize};"                     \
 440                 "setenv filesize;saveenv\0"                             \
 441         "update_kernel=tftp 100000 ${bootfile};"                        \
 442                 "era fe000000 fe1dffff;"                                \
 443                 "cp.b 100000 fe000000 ${filesize};"                     \
 444                 "setenv filesize;saveenv\0"                             \
 445         "update_fdt=tftp 100000 ${fdt_file};"                           \
 446                 "era fe1e0000 fe1fffff;"                                \
 447                 "cp.b 100000 fe1e0000 ${filesize};"                     \
 448                 "setenv filesize;saveenv\0"                             \
 449         "update_initrd=tftp 100000 ${initrd_file};"                     \
 450                 "era fe200000 fe9fffff;"                                \
 451                 "cp.b 100000 fe200000 ${filesize};"                     \
 452                 "setenv filesize;saveenv\0"                             \
 453         "clean_data=era fea00000 fff5ffff\0"                            \
 454         "usbargs=setenv bootargs root=/dev/sda1 rw\0"                   \
 455         "load_usb=usb start;"                                           \
 456                 "ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0"      \
 457         "boot_usb=run load_usb usbargs addcons;"                        \
 458                 "bootm ${kernel_addr_r} - ${fdt_addr};"                 \
 459                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 460         ""
 461 #define CONFIG_BOOTCOMMAND      "run boot_nor"
 462
 463 /* pass open firmware flat tree */
 464 #define CONFIG_OF_LIBFDT        1
 465 #define CONFIG_OF_BOARD_SETUP   1
 466
 467 /* USB support */
 468 #define CONFIG_USB_OHCI_NEW             1
 469 #define CONFIG_PCI_OHCI                 1
 470 #define CONFIG_PCI_OHCI_DEVNO           3 /* Number in PCI list */
 471 #define CONFIG_PCI_EHCI_DEVNO           (CONFIG_PCI_OHCI_DEVNO / 2)
 472 #define CFG_USB_OHCI_MAX_ROOT_PORTS     15
 473 #define CFG_USB_OHCI_SLOT_NAME          "ohci_pci"
 474 #define CFG_OHCI_SWAP_REG_ACCESS        1
 475 #define CONFIG_DOS_PARTITION            1
 476 #define CONFIG_USB_STORAGE              1
 477
 478 #endif  /* __CONFIG_H */