include/configs/svm_sc8xx.h

   1 /*
   2  * (C) Copyright 2000, 2001, 2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific,
  26  *                  for SinoVee Microsystems SC8xx series SBC
  27  *                  http://www.fel.com.cn (Chinese)
  28  *                  http://www.sinovee.com (English)
  29  */
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /* Custom configuration */
  35 /* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
  36 /* SC85T,SC860T, FEL8xx-AT(855T/860T) */
  37 /*#define CONFIG_FEL8xx_AT */
  38 /*#define CONFIG_LCD */
  39 /* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
  40 /* #define CONFIG_50MHz */
  41 /* #define CONFIG_66MHz */
  42 /* #define CONFIG_75MHz */
  43 #define CONFIG_80MHz
  44 /*#define CONFIG_100MHz */
  45 /* #define CONFIG_BUS_DIV2      1 */
  46 /* for BOOT device port size */
  47 /* #define CONFIG_BOOT_8B */
  48 #define CONFIG_BOOT_16B
  49 /* #define CONFIG_BOOT_32B */
  50 /* #define CONFIG_CAN_DRIVER */
  51 /* #define DEBUG */
  52 #define CONFIG_FEC_ENET
  53
  54 /* #define CONFIG_SDRAM_16M */
  55 #define CONFIG_SDRAM_32M
  56 /* #define CONFIG_SDRAM_64M */
  57 #define CONFIG_SYS_RESET_ADDRESS 0xffffffff
  58 /*
  59  * High Level Configuration Options
  60  * (easy to change)
  61  */
  62
  63 /* #define CONFIG_MPC823                1 */
  64 /* #define CONFIG_MPC850                1 */
  65 #define CONFIG_MPC855           1
  66 /* #define CONFIG_MPC860                1 */
  67 /* #define CONFIG_MPC860T               1 */
  68
  69 #undef  CONFIG_WATCHDOG                 /* watchdog */
  70
  71 #define CONFIG_SVM_SC8xx                1       /* ...on SVM SC8xx series       */
  72
  73 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  74 /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display       */
  75 #endif
  76
  77 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  78 #undef  CONFIG_8xx_CONS_SMC2
  79 #undef  CONFIG_8xx_CONS_NONE
  80 #define CONFIG_BAUDRATE         19200   /* console baudrate = 115kbps   */
  81 #if 0
  82 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  83 #else
  84 #define CONFIG_BOOTDELAY        1       /* autoboot after 5 seconds     */
  85 #endif
  86
  87 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  88
  89 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  90
  91 #define CONFIG_PREBOOT  "echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo"
  92
  93 #undef  CONFIG_BOOTARGS
  94 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  95         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  96          "nfsroot=${serverip}:${rootpath}\0"                     \
  97         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  98         "addip=setenv bootargs ${bootargs} "                            \
  99                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 100                 ":${hostname}:${netdev}:off panic=1\0"                  \
 101                 "flash_nfs=run nfsargs addip;"                                  \
 102              "bootm ${kernel_addr}\0"                                \
 103         "flash_self=run ramargs addip;"                                 \
 104                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 105         "net_nfs=tftp 0x210000 ${bootfile};run nfsargs addip;bootm\0"     \
 106         "rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0"                                  \
 107         "bootfile=pImage-sc855t\0"                           \
 108         "kernel_addr=48000000\0"                                        \
 109         "ramdisk_addr=48100000\0"                                       \
 110         ""
 111 #define CONFIG_BOOTCOMMAND                                                      \
 112         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
 113         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
 114         "tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
 115
 116 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 117 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
 118
 119
 120 #ifdef CONFIG_LCD
 121 # undef  CONFIG_STATUS_LED              /* disturbs display             */
 122 #else
 123 # define CONFIG_STATUS_LED      1       /* Status LED enabled           */
 124 #endif  /* CONFIG_LCD */
 125
 126 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
 127
 128 /*
 129  * BOOTP options
 130  */
 131 #define CONFIG_BOOTP_SUBNETMASK
 132 #define CONFIG_BOOTP_GATEWAY
 133 #define CONFIG_BOOTP_HOSTNAME
 134 #define CONFIG_BOOTP_BOOTPATH
 135 #define CONFIG_BOOTP_BOOTFILESIZE
 136
 137 #define CONFIG_MAC_PARTITION
 138 #define CONFIG_DOS_PARTITION
 139
 140 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 141
 142
 143 /*
 144  * Command line configuration.
 145  */
 146 #include <config_cmd_default.h>
 147
 148 #define CONFIG_CMD_ASKENV
 149 #define CONFIG_CMD_DHCP
 150 #define CONFIG_CMD_DOC
 151 #define CONFIG_CMD_DATE
 152
 153
 154 #define CONFIG_NAND_LEGACY
 155
 156 /*
 157  * Miscellaneous configurable options
 158  */
 159 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 160 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 161
 162 #ifdef  CONFIG_SYS_HUSH_PARSER
 163 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 164 #endif
 165
 166 #if defined(CONFIG_CMD_KGDB)
 167 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 168 #else
 169 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 170 #endif
 171 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 172 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 173 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 174
 175 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 176 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 177
 178 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 179
 180 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 181
 182 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 183
 184 /*
 185  * Low Level Configuration Settings
 186  * (address mappings, register initial values, etc.)
 187  * You should know what you are doing if you make changes here.
 188  */
 189 /*-----------------------------------------------------------------------
 190  * Internal Memory Mapped Register
 191  */
 192 #define CONFIG_SYS_IMMR         0xFF000000
 193
 194 /*-----------------------------------------------------------------------
 195  * Definitions for initial stack pointer and data area (in DPRAM)
 196  */
 197 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 198 #define CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
 199 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 200 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 201 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 202
 203 /*-----------------------------------------------------------------------
 204  * Start addresses for the final memory configuration
 205  * (Set up by the startup code)
 206  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 207  */
 208 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 209 #define CONFIG_SYS_FLASH_BASE           0x40000000
 210 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* Reserve 192 kB for Monitor   */
 211 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 212 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 213
 214 /*
 215  * For booting Linux, the board info and command line data
 216  * have to be in the first 8 MB of memory, since this is
 217  * the maximum mapped by the Linux kernel during initialization.
 218  */
 219 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 220
 221 /*-----------------------------------------------------------------------
 222  * FLASH organization
 223  */
 224 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 225 #define CONFIG_SYS_MAX_FLASH_SECT       67      /* max number of sectors on one chip    */
 226
 227 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 228 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 229
 230 #define CONFIG_ENV_IS_IN_FLASH  1
 231
 232 #ifdef CONFIG_BOOT_8B
 233 #define CONFIG_ENV_OFFSET               0x10000 /*   Offset   of Environment Sector     */
 234 #define CONFIG_ENV_SIZE         0x10000 /* Total Size of Environment Sector     */
 235 #elif defined (CONFIG_BOOT_16B)
 236 #define CONFIG_ENV_OFFSET               0x10000 /*   Offset   of Environment Sector     */
 237 #define CONFIG_ENV_SIZE         0x10000 /* Total Size of Environment Sector     */
 238 #elif defined (CONFIG_BOOT_32B)
 239 #define CONFIG_ENV_OFFSET               0x8000  /*   Offset   of Environment Sector     */
 240 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 241 #endif
 242
 243 /* Address and size of Redundant Environment Sector     */
 244 #define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
 245 #define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 246
 247
 248 /*-----------------------------------------------------------------------
 249  * Hardware Information Block
 250  */
 251 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 252 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 253 #define CONFIG_SYS_HWINFO_MAGIC 0x46454C38      /* 'SVM8' */
 254
 255 /*-----------------------------------------------------------------------
 256  * Cache Configuration
 257  */
 258 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 259 #if defined(CONFIG_CMD_KGDB)
 260 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 261 #endif
 262
 263 /*-----------------------------------------------------------------------
 264  * SYPCR - System Protection Control                            11-9
 265  * SYPCR can only be written once after reset!
 266  *-----------------------------------------------------------------------
 267  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 268  */
 269 #if defined(CONFIG_WATCHDOG)
 270 /*#define CONFIG_SYS_SYPCR      (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 271                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 272 */
 273 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
 274                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 275 #else
 276 #define CONFIG_SYS_SYPCR 0xffffff88
 277 #endif
 278
 279 /*-----------------------------------------------------------------------
 280  * SIUMCR - SIU Module Configuration                            11-6
 281  *-----------------------------------------------------------------------
 282  * PCMCIA config., multi-function pin tri-state
 283  */
 284 #ifndef CONFIG_CAN_DRIVER
 285 /*#define CONFIG_SYS_SIUMCR 0x00610c00  */
 286 #define CONFIG_SYS_SIUMCR 0x00000000
 287 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 288 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 289 #endif  /* CONFIG_CAN_DRIVER */
 290
 291 /*-----------------------------------------------------------------------
 292  * TBSCR - Time Base Status and Control                         11-26
 293  *-----------------------------------------------------------------------
 294  * Clear Reference Interrupt Status, Timebase freezing enabled
 295  */
 296 #define CONFIG_SYS_TBSCR        0x0001
 297
 298 /*-----------------------------------------------------------------------
 299  * RTCSC - Real-Time Clock Status and Control Register          11-27
 300  *-----------------------------------------------------------------------
 301  */
 302 #define CONFIG_SYS_RTCSC        0x00c3
 303
 304 /*-----------------------------------------------------------------------
 305  * PISCR - Periodic Interrupt Status and Control                11-31
 306  *-----------------------------------------------------------------------
 307  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 308  */
 309 #define CONFIG_SYS_PISCR        0x0000
 310
 311 /*-----------------------------------------------------------------------
 312  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 313  *-----------------------------------------------------------------------
 314  * Reset PLL lock status sticky bit, timer expired status bit and timer
 315  * interrupt status bit
 316  */
 317 #if defined (CONFIG_100MHz)
 318 #define CONFIG_SYS_PLPRCR 0x06301000
 319 #define CONFIG_8xx_GCLK_FREQ 100000000
 320 #elif defined (CONFIG_80MHz)
 321 #define CONFIG_SYS_PLPRCR 0x04f01000
 322 #define CONFIG_8xx_GCLK_FREQ 80000000
 323 #elif defined(CONFIG_75MHz)
 324 #define CONFIG_SYS_PLPRCR 0x04a00100
 325 #define CONFIG_8xx_GCLK_FREQ 75000000
 326 #elif defined(CONFIG_66MHz)
 327 #define CONFIG_SYS_PLPRCR 0x04101000
 328 #define CONFIG_8xx_GCLK_FREQ 66000000
 329 #elif defined(CONFIG_50MHz)
 330 #define CONFIG_SYS_PLPRCR 0x03101000
 331 #define CONFIG_8xx_GCLK_FREQ 50000000
 332 #endif
 333
 334 /*-----------------------------------------------------------------------
 335  * SCCR - System Clock and reset Control Register               15-27
 336  *-----------------------------------------------------------------------
 337  * Set clock output, timebase and RTC source and divider,
 338  * power management and some other internal clocks
 339  */
 340 #define SCCR_MASK       SCCR_EBDF11
 341 #ifdef  CONFIG_BUS_DIV2
 342 #define CONFIG_SYS_SCCR 0x02020000 | SCCR_RTSEL
 343 #else                   /* up to 50 MHz we use a 1:1 clock */
 344 #define CONFIG_SYS_SCCR    0x02000000 | SCCR_RTSEL
 345 #endif
 346
 347 /*-----------------------------------------------------------------------
 348  * PCMCIA stuff
 349  *-----------------------------------------------------------------------
 350  *
 351  */
 352 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 353 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 354 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 355 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 356 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 357 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 358 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 359 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 360
 361 /*-----------------------------------------------------------------------
 362  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 363  *-----------------------------------------------------------------------
 364  */
 365
 366 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 367
 368 #define CONFIG_IDE_8xx_DIRECT   1       /* Direct IDE    not supported  */
 369 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 370 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 371
 372 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 373 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 374
 375 #define CONFIG_SYS_ATA_BASE_ADDR       0xFE100010
 376 #define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
 377 /*#define CONFIG_SYS_ATA_IDE1_OFFSET     0x0C00 */
 378 #define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O
 379                                            */
 380 #define CONFIG_SYS_ATA_REG_OFFSET      0x0200  /* Offset for normal register accesses
 381                                            */
 382 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0210  /* Offset for alternate registers
 383                                            */
 384 #define CONFIG_ATAPI
 385 #define CONFIG_SYS_PIO_MODE 0
 386
 387 /*-----------------------------------------------------------------------
 388  *
 389  *-----------------------------------------------------------------------
 390  *
 391  */
 392 /*#define       CONFIG_SYS_DER  0x2002000F*/
 393 #define CONFIG_SYS_DER  0x0
 394
 395 /*
 396  * Init Memory Controller:
 397  *
 398  * BR0/1 and OR0/1 (FLASH)
 399  */
 400
 401 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 402 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 403
 404 /* used to re-map FLASH both when starting from SRAM or FLASH:
 405  * restrict access enough to keep SRAM working (if any)
 406  * but not too much to meddle with FLASH accesses
 407  */
 408 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 409 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 410
 411 /*
 412  * FLASH timing:
 413  */
 414 #if defined(CONFIG_100MHz)
 415 #define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4
 416 #define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
 417 #define CONFIG_SYS_MxMR_PTx 0x61000000
 418 #define CONFIG_SYS_MPTPR 0x400
 419
 420 #elif  defined(CONFIG_80MHz)
 421 #define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
 422 #define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
 423 #define CONFIG_SYS_MxMR_PTx 0x4e000000
 424 #define CONFIG_SYS_MPTPR 0x400
 425
 426 #elif defined(CONFIG_75MHz)
 427 #define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4
 428 #define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
 429 #define CONFIG_SYS_MxMR_PTx 0x49000000
 430 #define CONFIG_SYS_MPTPR 0x400
 431
 432 #elif defined(CONFIG_66MHz)
 433 #define CONFIG_SYS_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 434         OR_SCY_3_CLK | OR_EHTR | OR_BI)
 435 /*#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 */
 436 #define CONFIG_SYS_OR_TIMING_DOC   0x000003f4
 437 #define CONFIG_SYS_MxMR_PTx  0x40000000
 438 #define CONFIG_SYS_MPTPR 0x400
 439
 440 #else           /*   50 MHz */
 441 #define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
 442 #define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
 443 #define CONFIG_SYS_MxMR_PTx  0x30000000
 444 #define CONFIG_SYS_MPTPR 0x400
 445 #endif  /*CONFIG_??MHz */
 446
 447
 448 #if  defined (CONFIG_BOOT_8B)   /* 512K X 8 ,29F040 , 2MB space */
 449 #define CONFIG_SYS_OR0_PRELIM   (0xffe00000 | CONFIG_SYS_OR_TIMING_FLASH)
 450 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
 451 #elif  defined (CONFIG_BOOT_16B)   /* 29lv160 X 16 , 4MB space */
 452 #define CONFIG_SYS_OR0_PRELIM   (0xffc00000 | CONFIG_SYS_OR_TIMING_FLASH)
 453 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
 454 #elif defined( CONFIG_BOOT_32B )  /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
 455 #define CONFIG_SYS_OR0_PRELIM   (0xfc000000 | CONFIG_SYS_OR_TIMING_FLASH)
 456 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 457 #else
 458 #error Boot device port size missing.
 459 #endif
 460
 461 /*
 462  * Disk-On-Chip configuration
 463  */
 464
 465 #define CONFIG_SYS_DOC_SHORT_TIMEOUT
 466 #define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
 467
 468 #define CONFIG_SYS_DOC_SUPPORT_2000
 469 #define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 470 #define CONFIG_SYS_DOC_BASE 0x80000000
 471
 472
 473 /*
 474  * Internal Definitions
 475  *
 476  * Boot Flags
 477  */
 478 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 479 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 480
 481 #endif  /* __CONFIG_H */