include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI_1_0
  15
  16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  17
  18 /*-----------------------------------------------------------------------
  19  * MMU and Cache Setting
  20  *----------------------------------------------------------------------*/
  21
  22 /* Comment out the following to enable L1 cache */
  23 /* #define CONFIG_SYS_ICACHE_OFF */
  24 /* #define CONFIG_SYS_DCACHE_OFF */
  25
  26 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  27
  28 #define CONFIG_TIMESTAMP
  29
  30 /* FLASH related */
  31 #define CONFIG_MTD_DEVICE
  32
  33 #define CONFIG_SMC911X_32_BIT
  34 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  35 #define CONFIG_SMC911X_BASE     0
  36
  37 #ifdef CONFIG_MICRO_SUPPORT_CARD
  38 #define CONFIG_SMC911X
  39 #else
  40 #define CONFIG_SYS_NO_FLASH
  41 #endif
  42
  43 #define CONFIG_FLASH_CFI_DRIVER
  44 #define CONFIG_SYS_FLASH_CFI
  45
  46 #define CONFIG_SYS_MAX_FLASH_SECT       256
  47 #define CONFIG_SYS_MONITOR_BASE         0
  48 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  49 #define CONFIG_SYS_FLASH_BASE           0
  50
  51 /*
  52  * flash_toggle does not work for our support card.
  53  * We need to use flash_status_poll.
  54  */
  55 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  56
  57 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  58
  59 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  60
  61 /* serial console configuration */
  62 #define CONFIG_BAUDRATE                 115200
  63
  64 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  65
  66 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  67 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  68 /* Print Buffer Size */
  69 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  70 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  71 /* Boot Argument Buffer Size */
  72 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  73
  74 #define CONFIG_CONS_INDEX               1
  75
  76 /* #define CONFIG_ENV_IS_NOWHERE */
  77 /* #define CONFIG_ENV_IS_IN_NAND */
  78 #define CONFIG_ENV_IS_IN_MMC
  79 #define CONFIG_ENV_OFFSET                       0x80000
  80 #define CONFIG_ENV_SIZE                         0x2000
  81 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  82
  83 #define CONFIG_SYS_MMC_ENV_DEV          0
  84 #define CONFIG_SYS_MMC_ENV_PART         1
  85
  86 #ifdef CONFIG_ARMV8_MULTIENTRY
  87 #define CPU_RELEASE_ADDR                        0x80000000
  88 #define COUNTER_FREQUENCY                       50000000
  89 #define CONFIG_GICV3
  90 #define GICD_BASE                               0x5fe00000
  91 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
  92 #define GICR_BASE                               0x5fe40000
  93 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
  94 #define GICR_BASE                               0x5fe80000
  95 #endif
  96 #elif !defined(CONFIG_ARM64)
  97 /* Time clock 1MHz */
  98 #define CONFIG_SYS_TIMER_RATE                   1000000
  99 #endif
 100
 101
 102 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 103 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 104 #define CONFIG_SYS_NAND_ONFI_DETECTION
 105
 106 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 107
 108 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 109 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 110 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 111 #else
 112 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 113 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 114 #endif
 115
 116 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 117
 118 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 119 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 120
 121 /* USB */
 122 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 123 #define CONFIG_FAT_WRITE
 124
 125 /* SD/MMC */
 126 #define CONFIG_SUPPORT_EMMC_BOOT
 127 #define CONFIG_GENERIC_MMC
 128
 129 /* memtest works on */
 130 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 131 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 132
 133 /*
 134  * Network Configuration
 135  */
 136 #define CONFIG_SERVERIP                 192.168.11.1
 137 #define CONFIG_IPADDR                   192.168.11.10
 138 #define CONFIG_GATEWAYIP                192.168.11.1
 139 #define CONFIG_NETMASK                  255.255.255.0
 140
 141 #define CONFIG_LOADADDR                 0x84000000
 142 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 143
 144 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 145
 146 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 147
 148 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 149 #define CONFIG_NFSBOOTCOMMAND                                           \
 150         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 151         "nfsroot=$serverip:$rootpath "                                  \
 152         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 153                 "run __nfsboot"
 154
 155 #ifdef CONFIG_FIT
 156 #define CONFIG_BOOTFILE                 "fitImage"
 157 #define LINUXBOOT_ENV_SETTINGS \
 158         "fit_addr=0x00100000\0" \
 159         "fit_addr_r=0x84100000\0" \
 160         "fit_size=0x00f00000\0" \
 161         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 162                 "bootm $fit_addr\0" \
 163         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 164                 "bootm $fit_addr_r\0" \
 165         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 166                 "bootm $fit_addr_r\0" \
 167         "__nfsboot=run tftpboot\0"
 168 #else
 169 #ifdef CONFIG_ARM64
 170 #define CONFIG_BOOTFILE                 "Image"
 171 #define LINUXBOOT_CMD                   "booti"
 172 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 173 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 174 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 175 #else
 176 #define CONFIG_BOOTFILE                 "zImage"
 177 #define LINUXBOOT_CMD                   "bootz"
 178 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 179 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 180 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 181 #endif
 182 #define LINUXBOOT_ENV_SETTINGS \
 183         "fdt_addr=0x00100000\0" \
 184         "fdt_addr_r=0x84100000\0" \
 185         "fdt_size=0x00008000\0" \
 186         "kernel_addr=0x00200000\0" \
 187         KERNEL_ADDR_R \
 188         KERNEL_SIZE \
 189         RAMDISK_ADDR \
 190         "ramdisk_addr_r=0x84a00000\0" \
 191         "ramdisk_size=0x00600000\0" \
 192         "ramdisk_file=rootfs.cpio.uboot\0" \
 193         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 194                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 195         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 196                 "setexpr kernel_size $kernel_size / 4 &&" \
 197                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 198                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 199                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 200                 "run boot_common\0" \
 201         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 202                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 203                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 204                 "run boot_common\0" \
 205         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 206                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 207                 "tftpboot $fdt_addr_r $fdt_file &&" \
 208                 "run boot_common\0" \
 209         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 210                 "tftpboot $fdt_addr_r $fdt_file &&" \
 211                 "setenv ramdisk_addr_r - &&" \
 212                 "run boot_common\0"
 213 #endif
 214
 215 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 216         "netdev=eth0\0"                                         \
 217         "verify=n\0"                                            \
 218         "nor_base=0x42000000\0"                                 \
 219         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 220                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 221                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 222                 "tftpboot $tmp_addr u-boot.bin\0"               \
 223         "emmcupdate=mmcsetn &&"                                 \
 224                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 225                 "tftpboot u-boot-spl.bin &&"                    \
 226                 "mmc write $loadaddr 0 80 &&"                   \
 227                 "tftpboot u-boot.bin &&"                        \
 228                 "mmc write $loadaddr 80 780\0"                  \
 229         "nandupdate=nand erase 0 0x00100000 &&"                 \
 230                 "tftpboot u-boot-spl.bin &&"                    \
 231                 "nand write $loadaddr 0 0x00010000 &&"          \
 232                 "tftpboot u-boot.bin &&"                        \
 233                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 234         LINUXBOOT_ENV_SETTINGS
 235
 236 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 237
 238 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 239 #define CONFIG_NR_DRAM_BANKS            2
 240 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 241 #define CONFIG_SYS_MEM_TOP_HIDE         64
 242
 243 #if defined(CONFIG_ARM64)
 244 #define CONFIG_SPL_TEXT_BASE            0x30000000
 245 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 246         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 247         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 248 #define CONFIG_SPL_TEXT_BASE            0x00040000
 249 #else
 250 #define CONFIG_SPL_TEXT_BASE            0x00100000
 251 #endif
 252
 253 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 254 #define CONFIG_SPL_STACK                (0x30014c00)
 255 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 256 #define CONFIG_SPL_STACK                (0x3001c000)
 257 #else
 258 #define CONFIG_SPL_STACK                (0x00100000)
 259 #endif
 260 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 261
 262 #define CONFIG_PANIC_HANG
 263
 264 #define CONFIG_SPL_FRAMEWORK
 265 #ifdef CONFIG_ARM64
 266 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 267 #endif
 268
 269 #define CONFIG_SPL_BOARD_INIT
 270
 271 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 272
 273 /* subtract sizeof(struct image_header) */
 274 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 275
 276 #ifdef CONFIG_SPL
 277 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 278 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 279 #define CONFIG_SPL_MAX_SIZE                     0x10000
 280 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 281 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 282 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 283 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 284 #endif
 285 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 286 #endif
 287
 288 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */