include/configs/vexpress_aemv8a.h

   1 /*
   2  * Configuration for Versatile Express. Parts were derived from other ARM
   3  *   configurations.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __VEXPRESS_AEMV8A_H
   9 #define __VEXPRESS_AEMV8A_H
  10
  11 #ifdef CONFIG_BASE_FVP
  12 #ifndef CONFIG_SEMIHOSTING
  13 #error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
  14 #endif
  15 #define CONFIG_BOARD_LATE_INIT
  16 #define CONFIG_ARMV8_SWITCH_TO_EL1
  17 #endif
  18
  19 #define CONFIG_REMAKE_ELF
  20
  21 #ifndef CONFIG_BASE_FVP
  22 /* Base FVP not using GICv3 yet */
  23 #define CONFIG_GICV3
  24 #endif
  25
  26 /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
  27
  28 /*#define CONFIG_SYS_GENERIC_BOARD*/
  29
  30 #define CONFIG_SYS_NO_FLASH
  31
  32 #define CONFIG_SUPPORT_RAW_INITRD
  33
  34 /* Cache Definitions */
  35 #define CONFIG_SYS_DCACHE_OFF
  36 #define CONFIG_SYS_ICACHE_OFF
  37
  38 #define CONFIG_IDENT_STRING             " vexpress_aemv8a"
  39 #define CONFIG_BOOTP_VCI_STRING         "U-boot.armv8.vexpress_aemv8a"
  40
  41 /* Link Definitions */
  42 #ifdef CONFIG_BASE_FVP
  43 /* ATF loads u-boot here for BASE_FVP model */
  44 #define CONFIG_SYS_TEXT_BASE            0x88000000
  45 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
  46 #else
  47 #define CONFIG_SYS_TEXT_BASE            0x80000000
  48 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  49 #endif
  50
  51 /* Flat Device Tree Definitions */
  52 #define CONFIG_OF_LIBFDT
  53
  54 #define CONFIG_DEFAULT_DEVICE_TREE      vexpress64
  55
  56 /* SMP Spin Table Definitions */
  57 #ifdef CONFIG_BASE_FVP
  58 #define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
  59 #else
  60 #define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  61 #endif
  62
  63 /* CS register bases for the original memory map. */
  64 #define V2M_PA_CS0                      0x00000000
  65 #define V2M_PA_CS1                      0x14000000
  66 #define V2M_PA_CS2                      0x18000000
  67 #define V2M_PA_CS3                      0x1c000000
  68 #define V2M_PA_CS4                      0x0c000000
  69 #define V2M_PA_CS5                      0x10000000
  70
  71 #define V2M_PERIPH_OFFSET(x)            (x << 16)
  72 #define V2M_SYSREGS                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
  73 #define V2M_SYSCTL                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
  74 #define V2M_SERIAL_BUS_PCI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
  75
  76 #define V2M_BASE                        0x80000000
  77
  78 /*
  79  * Physical addresses, offset from V2M_PA_CS0-3
  80  */
  81 #define V2M_NOR0                        (V2M_PA_CS0)
  82 #define V2M_NOR1                        (V2M_PA_CS4)
  83 #define V2M_SRAM                        (V2M_PA_CS1)
  84
  85 /* Common peripherals relative to CS7. */
  86 #define V2M_AACI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
  87 #define V2M_MMCI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
  88 #define V2M_KMI0                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
  89 #define V2M_KMI1                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
  90
  91 #define V2M_UART0                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
  92 #define V2M_UART1                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
  93 #define V2M_UART2                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
  94 #define V2M_UART3                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
  95
  96 #define V2M_WDT                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
  97
  98 #define V2M_TIMER01                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
  99 #define V2M_TIMER23                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
 100
 101 #define V2M_SERIAL_BUS_DVI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
 102 #define V2M_RTC                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
 103
 104 #define V2M_CF                          (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
 105
 106 #define V2M_CLCD                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
 107
 108 /* System register offsets. */
 109 #define V2M_SYS_CFGDATA                 (V2M_SYSREGS + 0x0a0)
 110 #define V2M_SYS_CFGCTRL                 (V2M_SYSREGS + 0x0a4)
 111 #define V2M_SYS_CFGSTAT                 (V2M_SYSREGS + 0x0a8)
 112
 113 /* Generic Timer Definitions */
 114 #define COUNTER_FREQUENCY               (0x1800000)     /* 24MHz */
 115
 116 /* Generic Interrupt Controller Definitions */
 117 #ifdef CONFIG_GICV3
 118 #define GICD_BASE                       (0x2f000000)
 119 #define GICR_BASE                       (0x2f100000)
 120 #else
 121
 122 #ifdef CONFIG_BASE_FVP
 123 #define GICD_BASE                       (0x2f000000)
 124 #define GICC_BASE                       (0x2c000000)
 125 #else
 126 #define GICD_BASE                       (0x2C001000)
 127 #define GICC_BASE                       (0x2C002000)
 128 #endif
 129 #endif
 130
 131 #define CONFIG_SYS_MEMTEST_START        V2M_BASE
 132 #define CONFIG_SYS_MEMTEST_END          (V2M_BASE + 0x80000000)
 133
 134 /* Size of malloc() pool */
 135 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (8 << 20))
 136
 137 /* SMSC91C111 Ethernet Configuration */
 138 #define CONFIG_SMC91111                 1
 139 #define CONFIG_SMC91111_BASE            (0x01A000000)
 140
 141 /* PL011 Serial Configuration */
 142 #define CONFIG_PL011_SERIAL
 143 #define CONFIG_PL011_CLOCK              24000000
 144 #define CONFIG_PL01x_PORTS              {(void *)CONFIG_SYS_SERIAL0, \
 145                                          (void *)CONFIG_SYS_SERIAL1}
 146 #define CONFIG_CONS_INDEX               0
 147
 148 #define CONFIG_BAUDRATE                 115200
 149 #define CONFIG_SYS_SERIAL0              V2M_UART0
 150 #define CONFIG_SYS_SERIAL1              V2M_UART1
 151
 152 /* Command line configuration */
 153 #define CONFIG_MENU
 154 /*#define CONFIG_MENU_SHOW*/
 155 #define CONFIG_CMD_CACHE
 156 #define CONFIG_CMD_BDI
 157 #define CONFIG_CMD_DHCP
 158 #define CONFIG_CMD_PXE
 159 #define CONFIG_CMD_ENV
 160 #define CONFIG_CMD_FLASH
 161 #define CONFIG_CMD_IMI
 162 #define CONFIG_CMD_MEMORY
 163 #define CONFIG_CMD_MII
 164 #define CONFIG_CMD_NET
 165 #define CONFIG_CMD_PING
 166 #define CONFIG_CMD_SAVEENV
 167 #define CONFIG_CMD_RUN
 168 #define CONFIG_CMD_BOOTD
 169 #define CONFIG_CMD_ECHO
 170 #define CONFIG_CMD_SOURCE
 171 #define CONFIG_CMD_FAT
 172 #define CONFIG_DOS_PARTITION
 173
 174 /* BOOTP options */
 175 #define CONFIG_BOOTP_BOOTFILESIZE
 176 #define CONFIG_BOOTP_BOOTPATH
 177 #define CONFIG_BOOTP_GATEWAY
 178 #define CONFIG_BOOTP_HOSTNAME
 179 #define CONFIG_BOOTP_PXE
 180 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
 181
 182 /* Miscellaneous configurable options */
 183 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x10000000)
 184
 185 /* Physical Memory Map */
 186 #define CONFIG_NR_DRAM_BANKS            1
 187 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 188 #define PHYS_SDRAM_1_SIZE               0x80000000      /* 2048 MB */
 189 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 190
 191 /* Initial environment variables */
 192 #ifdef CONFIG_BASE_FVP
 193 #define CONFIG_EXTRA_ENV_SETTINGS       \
 194                                 "kernel_name=uImage\0"  \
 195                                 "kernel_addr_r=0x80000000\0"    \
 196                                 "initrd_name=ramdisk.img\0"     \
 197                                 "initrd_addr_r=0x88000000\0"    \
 198                                 "fdt_name=devtree.dtb\0"                \
 199                                 "fdt_addr_r=0x83000000\0"               \
 200                                 "fdt_high=0xffffffffffffffff\0" \
 201                                 "initrd_high=0xffffffffffffffff\0"
 202
 203 #define CONFIG_BOOTARGS         "console=ttyAMA0 earlyprintk=pl011,"\
 204                                 "0x1c090000 debug user_debug=31 "\
 205                                 "loglevel=9"
 206
 207 #define CONFIG_BOOTCOMMAND      "fdt addr $fdt_addr_r; fdt resize; " \
 208                                 "fdt chosen $initrd_addr_r $initrd_end; " \
 209                                 "bootm $kernel_addr_r - $fdt_addr_r"
 210
 211 #define CONFIG_BOOTDELAY                1
 212
 213 #else
 214
 215 #define CONFIG_EXTRA_ENV_SETTINGS       \
 216                                         "kernel_addr_r=0x80000000\0"    \
 217                                         "initrd_addr_r=0x88000000\0"    \
 218                                         "fdt_addr_r=0x83000000\0"               \
 219                                         "fdt_high=0xa0000000\0"
 220
 221 #define CONFIG_BOOTARGS                 "console=ttyAMA0 root=/dev/ram0"
 222 #define CONFIG_BOOTCOMMAND              "bootm $kernel_addr_r " \
 223                                         "$initrd_addr_r:$initrd_size $fdt_addr_r"
 224 #define CONFIG_BOOTDELAY                -1
 225 #endif
 226
 227 /* Do not preserve environment */
 228 #define CONFIG_ENV_IS_NOWHERE           1
 229 #define CONFIG_ENV_SIZE                 0x1000
 230
 231 /* Monitor Command Prompt */
 232 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 233 #define CONFIG_SYS_PROMPT               "VExpress64# "
 234 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 235                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 236 #define CONFIG_SYS_HUSH_PARSER
 237 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 238 #define CONFIG_SYS_LONGHELP
 239 #define CONFIG_CMDLINE_EDITING
 240 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 241
 242 #endif /* __VEXPRESS_AEMV8A_H */