include/configs/work_92105.h

   1 /*
   2  * WORK Microwave work_92105 board configuration file
   3  *
   4  * (C) Copyright 2014  DENX Software Engineering GmbH
   5  * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_WORK_92105_H__
  11 #define __CONFIG_WORK_92105_H__
  12
  13 /* SoC and board defines */
  14 #include <linux/sizes.h>
  15 #include <asm/arch/cpu.h>
  16
  17 /*
  18  * Define work_92105 machine type by hand -- done only for compatibility
  19  * with original board code
  20  */
  21 #define CONFIG_MACH_TYPE                736
  22
  23 #define CONFIG_SYS_ICACHE_OFF
  24 #define CONFIG_SYS_DCACHE_OFF
  25 #if !defined(CONFIG_SPL_BUILD)
  26 #define CONFIG_SKIP_LOWLEVEL_INIT
  27 #endif
  28 #define CONFIG_BOARD_EARLY_INIT_R
  29
  30 /* generate LPC32XX-specific SPL image */
  31 #define CONFIG_LPC32XX_SPL
  32
  33 /*
  34  * Memory configurations
  35  */
  36 #define CONFIG_NR_DRAM_BANKS            1
  37 #define CONFIG_SYS_MALLOC_LEN           SZ_1M
  38 #define CONFIG_SYS_SDRAM_BASE           EMC_DYCS0_BASE
  39 #define CONFIG_SYS_SDRAM_SIZE           SZ_128M
  40 #define CONFIG_SYS_TEXT_BASE            0x80100000
  41 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + SZ_32K)
  42 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE - SZ_1M)
  43
  44 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + SZ_32K)
  45
  46 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + SZ_512K \
  47                                          - GENERATED_GBL_DATA_SIZE)
  48
  49 /*
  50  * Serial Driver
  51  */
  52 #define CONFIG_SYS_LPC32XX_UART         5   /* UART5 - NS16550 */
  53
  54 /*
  55  * Ethernet Driver
  56  */
  57
  58 #define CONFIG_PHY_SMSC
  59 #define CONFIG_LPC32XX_ETH
  60 #define CONFIG_PHYLIB
  61 #define CONFIG_PHY_ADDR 0
  62 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  63 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
  64
  65 /*
  66  * I2C driver
  67  */
  68
  69 #define CONFIG_SYS_I2C_LPC32XX
  70 #define CONFIG_SYS_I2C
  71 #define CONFIG_SYS_I2C_SPEED 350000
  72
  73 /*
  74  * I2C EEPROM
  75  */
  76
  77 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
  78 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
  79
  80 /*
  81  * I2C RTC
  82  */
  83
  84 #define CONFIG_RTC_DS1374
  85
  86 /*
  87  * U-Boot General Configurations
  88  */
  89 #define CONFIG_SYS_LONGHELP
  90 #define CONFIG_SYS_CBSIZE               1024
  91 #define CONFIG_SYS_PBSIZE               \
  92         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  93 #define CONFIG_SYS_MAXARGS              16
  94 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  95
  96 #define CONFIG_AUTO_COMPLETE
  97 #define CONFIG_CMDLINE_EDITING
  98
  99 /*
 100  * NAND chip timings for FIXME: which one?
 101  */
 102
 103 #define CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY  333333333
 104 #define CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY   10000000
 105 #define CONFIG_LPC32XX_NAND_MLC_NAND_TA      18181818
 106 #define CONFIG_LPC32XX_NAND_MLC_RD_HIGH      31250000
 107 #define CONFIG_LPC32XX_NAND_MLC_RD_LOW       45454545
 108 #define CONFIG_LPC32XX_NAND_MLC_WR_HIGH      40000000
 109 #define CONFIG_LPC32XX_NAND_MLC_WR_LOW       83333333
 110
 111 /*
 112  * NAND
 113  */
 114
 115 /* driver configuration */
 116 #define CONFIG_SYS_NAND_SELF_INIT
 117 #define CONFIG_SYS_MAX_NAND_DEVICE 1
 118 #define CONFIG_SYS_MAX_NAND_CHIPS 1
 119 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
 120 #define CONFIG_NAND_LPC32XX_MLC
 121
 122 #define CONFIG_CMD_NAND
 123
 124 /*
 125  * GPIO
 126  */
 127
 128 #define CONFIG_LPC32XX_GPIO
 129
 130 /*
 131  * SSP/SPI/DISPLAY
 132  */
 133
 134 #define CONFIG_LPC32XX_SSP
 135 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000
 136 #define CONFIG_CMD_MAX6957
 137 #define CONFIG_CMD_HD44760
 138 /*
 139  * Environment
 140  */
 141
 142 #define CONFIG_ENV_IS_IN_NAND           1
 143 #define CONFIG_ENV_SIZE                 0x00020000
 144 #define CONFIG_ENV_OFFSET               0x00100000
 145 #define CONFIG_ENV_OFFSET_REDUND        0x00120000
 146 #define CONFIG_ENV_ADDR                 0x80000100
 147
 148 /*
 149  * Boot Linux
 150  */
 151 #define CONFIG_CMDLINE_TAG
 152 #define CONFIG_SETUP_MEMORY_TAGS
 153 #define CONFIG_INITRD_TAG
 154
 155 #define CONFIG_BOOTFILE                 "uImage"
 156 #define CONFIG_BOOTARGS                 "console=ttyS2,115200n8"
 157 #define CONFIG_LOADADDR                 0x80008000
 158
 159 /*
 160  * SPL
 161  */
 162
 163 /* SPL will be executed at offset 0 */
 164 #define CONFIG_SPL_TEXT_BASE 0x00000000
 165 /* SPL will use SRAM as stack */
 166 #define CONFIG_SPL_STACK     0x0000FFF8
 167 /* Use the framework and generic lib */
 168 #define CONFIG_SPL_FRAMEWORK
 169 /* SPL will use serial */
 170 /* SPL will load U-Boot from NAND offset 0x40000 */
 171 #define CONFIG_SPL_NAND_DRIVERS
 172 #define CONFIG_SPL_NAND_BASE
 173 #define CONFIG_SPL_NAND_BOOT
 174 #define CONFIG_SYS_NAND_U_BOOT_OFFS  0x00040000
 175 #define CONFIG_SPL_PAD_TO 0x20000
 176 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
 177 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */
 178 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
 179 #define CONFIG_SYS_NAND_U_BOOT_DST   CONFIG_SYS_TEXT_BASE
 180
 181 /*
 182  * Include SoC specific configuration
 183  */
 184 #include <asm/arch/config.h>
 185
 186 #endif  /* __CONFIG_WORK_92105_H__*/