include/configs/yosemite.h

   1 /*
   2  * (C) Copyright 2005-2006
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /************************************************************************
  25  * yosemite.h - configuration for YOSEMITE board
  26  ***********************************************************************/
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*-----------------------------------------------------------------------
  31  * High Level Configuration Options
  32  *----------------------------------------------------------------------*/
  33 #define CONFIG_YOSEMITE         1       /* Board is Yosemite            */
  34 #define CONFIG_440EP            1       /* Specific PPC440EP support    */
  35 #define CONFIG_4xx              1       /* ... PPC4xx family            */
  36 #define CONFIG_SYS_CLK_FREQ     66666666    /* external freq to pll     */
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  39 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
  40
  41 /*-----------------------------------------------------------------------
  42  * Base addresses -- Note these are effective addresses where the
  43  * actual resources get mapped (not physical addresses)
  44  *----------------------------------------------------------------------*/
  45 #define CFG_MONITOR_LEN         (512 * 1024)    /* Reserve 512 kB for Monitor   */
  46 #define CFG_MALLOC_LEN          (256 * 1024)    /* Reserve 256 kB for malloc()  */
  47 #define CFG_MONITOR_BASE        (-CFG_MONITOR_LEN)
  48 #define CFG_SDRAM_BASE          0x00000000          /* _must_ be 0      */
  49 #define CFG_FLASH_BASE          0xfc000000          /* start of FLASH   */
  50 #define CFG_PCI_MEMBASE         0xa0000000          /* mapped pci memory*/
  51 #define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
  52 #define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
  53 #define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
  54
  55 /*Don't change either of these*/
  56 #define CFG_PERIPHERAL_BASE     0xef600000          /* internal peripherals*/
  57 #define CFG_PCI_BASE            0xe0000000          /* internal PCI regs*/
  58 /*Don't change either of these*/
  59
  60 #define CFG_USB_DEVICE          0x50000000
  61 #define CFG_NVRAM_BASE_ADDR     0x80000000
  62 #define CFG_BCSR_BASE           (CFG_NVRAM_BASE_ADDR | 0x2000)
  63 #define CFG_BOOT_BASE_ADDR      0xf0000000
  64
  65 /*-----------------------------------------------------------------------
  66  * Initial RAM & stack pointer (placed in SDRAM)
  67  *----------------------------------------------------------------------*/
  68 #define CFG_INIT_RAM_ADDR       0x70000000              /* DCache       */
  69 #define CFG_INIT_RAM_END        (8 << 10)
  70 #define CFG_GBL_DATA_SIZE       256                     /* num bytes initial data*/
  71 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
  72 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
  73
  74 /*-----------------------------------------------------------------------
  75  * Serial Port
  76  *----------------------------------------------------------------------*/
  77 #define CFG_EXT_SERIAL_CLOCK    11059200 /* use external 11.059MHz clk  */
  78 #define CONFIG_BAUDRATE         115200
  79 #define CONFIG_SERIAL_MULTI     1
  80 /*define this if you want console on UART1*/
  81 #undef CONFIG_UART1_CONSOLE
  82
  83 #define CFG_BAUDRATE_TABLE  \
  84     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  85
  86 /*-----------------------------------------------------------------------
  87  * Environment
  88  *----------------------------------------------------------------------*/
  89 /*
  90  * Define here the location of the environment variables (FLASH or EEPROM).
  91  * Note: DENX encourages to use redundant environment in FLASH.
  92  */
  93 #if 1
  94 #define CFG_ENV_IS_IN_FLASH     1       /* use FLASH for environment vars       */
  95 #else
  96 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars      */
  97 #endif
  98
  99 /*-----------------------------------------------------------------------
 100  * FLASH related
 101  *----------------------------------------------------------------------*/
 102 #define CFG_FLASH_CFI                           /* The flash is CFI compatible  */
 103 #define CFG_FLASH_CFI_DRIVER                    /* Use common CFI driver        */
 104 #define CFG_FLASH_CFI_AMD_RESET 1               /* AMD RESET for STM 29W320DB!  */
 105
 106 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 107 #define CFG_MAX_FLASH_SECT      512     /* max number of sectors on one chip    */
 108
 109 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 110 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 111
 112 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
 113
 114 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 115
 116 #ifdef CFG_ENV_IS_IN_FLASH
 117 #define CFG_ENV_SECT_SIZE       0x20000         /* size of one complete sector  */
 118 #define CFG_ENV_ADDR            (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 119 #define CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
 120
 121 /* Address and size of Redundant Environment Sector     */
 122 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 123 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 124 #endif /* CFG_ENV_IS_IN_FLASH */
 125
 126 /*-----------------------------------------------------------------------
 127  * DDR SDRAM
 128  *----------------------------------------------------------------------*/
 129 #undef CONFIG_SPD_EEPROM               /* Don't use SPD EEPROM for setup    */
 130 #define CFG_KBYTES_SDRAM        (128 * 1024)    /* 128MB                    */
 131 #define CFG_SDRAM_BANKS         (2)
 132
 133
 134 /*-----------------------------------------------------------------------
 135  * I2C
 136  *----------------------------------------------------------------------*/
 137 #define CONFIG_HARD_I2C         1           /* I2C with hardware support        */
 138 #undef  CONFIG_SOFT_I2C                     /* I2C bit-banged           */
 139 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 140 #define CFG_I2C_SLAVE           0x7F
 141
 142 #define CFG_I2C_MULTI_EEPROMS
 143 #define CFG_I2C_EEPROM_ADDR     (0xa8>>1)
 144 #define CFG_I2C_EEPROM_ADDR_LEN 1
 145 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 146 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 147 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 148
 149 #ifdef CFG_ENV_IS_IN_EEPROM
 150 #define CFG_ENV_SIZE            0x200       /* Size of Environment vars */
 151 #define CFG_ENV_OFFSET          0x0
 152 #endif /* CFG_ENV_IS_IN_EEPROM */
 153
 154 #define CONFIG_PREBOOT  "echo;" \
 155         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 156         "echo"
 157
 158 #undef  CONFIG_BOOTARGS
 159
 160 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 161         "netdev=eth0\0"                                                 \
 162         "hostname=yosemite\0"                                           \
 163         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 164                 "nfsroot=${serverip}:${rootpath}\0"                     \
 165         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 166         "addip=setenv bootargs ${bootargs} "                            \
 167                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 168                 ":${hostname}:${netdev}:off panic=1\0"                  \
 169         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 170         "flash_nfs=run nfsargs addip addtty;"                           \
 171                 "bootm ${kernel_addr}\0"                                \
 172         "flash_self=run ramargs addip addtty;"                          \
 173                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 174         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 175                 "bootm\0"                                               \
 176         "rootpath=/opt/eldk/ppc_4xx\0"                                  \
 177         "bootfile=/tftpboot/yosemite/uImage\0"                          \
 178         "kernel_addr=fc000000\0"                                        \
 179         "ramdisk_addr=fc180000\0"                                       \
 180         "load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0"              \
 181         "update=protect off fff80000 ffffffff;era fff80000 ffffffff;"   \
 182                 "cp.b 100000 fff80000 80000;"                           \
 183                 "setenv filesize;saveenv\0"                             \
 184         "upd=run load;run update\0"                                     \
 185         ""
 186 #define CONFIG_BOOTCOMMAND      "run flash_self"
 187
 188 #if 0
 189 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
 190 #else
 191 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 192 #endif
 193
 194 #define CONFIG_BAUDRATE         115200
 195
 196 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 197 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 198
 199 #define CONFIG_MII              1       /* MII PHY management           */
 200 #define CONFIG_NET_MULTI        1       /* required for netconsole      */
 201 #define CONFIG_PHY1_ADDR        3
 202 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
 203 #define CONFIG_PHY_ADDR         1       /* PHY address, See schematics  */
 204
 205 #define CFG_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 206
 207 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
 208
 209 /* Partitions */
 210 #define CONFIG_MAC_PARTITION
 211 #define CONFIG_DOS_PARTITION
 212 #define CONFIG_ISO_PARTITION
 213
 214 #ifdef CONFIG_440EP
 215 /* USB */
 216 #define CONFIG_USB_OHCI
 217 #define CONFIG_USB_STORAGE
 218
 219 /*Comment this out to enable USB 1.1 device*/
 220 #define USB_2_0_DEVICE
 221 #endif /*CONFIG_440EP*/
 222
 223 #ifdef DEBUG
 224 #define CONFIG_PANIC_HANG
 225 #else
 226 #define CONFIG_HW_WATCHDOG                      /* watchdog */
 227 #endif
 228
 229 #define CONFIG_COMMANDS        (CONFIG_CMD_DFL  | \
 230                                 CFG_CMD_ASKENV  | \
 231                                 CFG_CMD_DHCP    | \
 232                                 CFG_CMD_DIAG    | \
 233                                 CFG_CMD_ELF     | \
 234                                 CFG_CMD_I2C     | \
 235                                 CFG_CMD_IRQ     | \
 236                                 CFG_CMD_MII     | \
 237                                 CFG_CMD_NET     | \
 238                                 CFG_CMD_NFS     | \
 239                                 CFG_CMD_PCI     | \
 240                                 CFG_CMD_PING    | \
 241                                 CFG_CMD_REGINFO | \
 242                                 CFG_CMD_SDRAM   | \
 243                                 CFG_CMD_FAT     | \
 244                                 CFG_CMD_EXT2    | \
 245                                 CFG_CMD_USB     )
 246
 247 #define CONFIG_SUPPORT_VFAT
 248
 249 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 250 #include <cmd_confdefs.h>
 251
 252 /*
 253  * Miscellaneous configurable options
 254  */
 255 #define CFG_LONGHELP                    /* undef to save memory         */
 256 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 257 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 258 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 259 #else
 260 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 261 #endif
 262 #define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 263 #define CFG_MAXARGS             16      /* max number of command args   */
 264 #define CFG_BARGSIZE            CFG_CBSIZE /* Boot Argument Buffer Size */
 265
 266 #define CFG_MEMTEST_START       0x0400000 /* memtest works on           */
 267 #define CFG_MEMTEST_END         0x0C00000 /* 4 ... 12 MB in DRAM        */
 268
 269 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 270 #define CFG_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 271 #define CONFIG_LYNXKDI          1       /* support kdi files            */
 272
 273 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 274
 275 /*-----------------------------------------------------------------------
 276  * PCI stuff
 277  *-----------------------------------------------------------------------
 278  */
 279 /* General PCI */
 280 #define CONFIG_PCI                      /* include pci support          */
 281 #undef  CONFIG_PCI_PNP                  /* do (not) pci plug-and-play   */
 282 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 283 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 284
 285 /* Board-specific PCI */
 286 #define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
 287 #define CFG_PCI_TARGET_INIT
 288 #define CFG_PCI_MASTER_INIT
 289
 290 #define CFG_PCI_SUBSYS_VENDORID 0x10e8  /* AMCC */
 291 #define CFG_PCI_SUBSYS_ID       0xcafe  /* Whatever */
 292
 293 /*
 294  * For booting Linux, the board info and command line data
 295  * have to be in the first 8 MB of memory, since this is
 296  * the maximum mapped by the Linux kernel during initialization.
 297  */
 298 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 299
 300 /*-----------------------------------------------------------------------
 301  * Cache Configuration
 302  */
 303 #define CFG_DCACHE_SIZE         (32<<10) /* For AMCC 440 CPUs                   */
 304 #define CFG_CACHELINE_SIZE      32      /* ...                  */
 305 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 306 #define CFG_CACHELINE_SHIFT     5       /* log base 2 of the above value        */
 307 #endif
 308
 309 /*
 310  * Internal Definitions
 311  *
 312  * Boot Flags
 313  */
 314 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 315 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 316
 317 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 318 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 319 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 320 #endif
 321
 322 #endif  /* __CONFIG_H */