include/hw/sd/sd.h

   1 /*
   2  * SD Memory Card emulation.  Mostly correct for MMC too.
   3  *
   4  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  *
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in
  14  *    the documentation and/or other materials provided with the
  15  *    distribution.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
  18  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  19  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
  20  * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR
  21  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  22  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  23  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  24  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  25  * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  27  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28  */
  29
  30 #ifndef HW_SD_H
  31 #define HW_SD_H
  32
  33 #include "hw/qdev-core.h"
  34 #include "qom/object.h"
  35
  36 #define OUT_OF_RANGE            (1 << 31)
  37 #define ADDRESS_ERROR           (1 << 30)
  38 #define BLOCK_LEN_ERROR         (1 << 29)
  39 #define ERASE_SEQ_ERROR         (1 << 28)
  40 #define ERASE_PARAM             (1 << 27)
  41 #define WP_VIOLATION            (1 << 26)
  42 #define CARD_IS_LOCKED          (1 << 25)
  43 #define LOCK_UNLOCK_FAILED      (1 << 24)
  44 #define COM_CRC_ERROR           (1 << 23)
  45 #define ILLEGAL_COMMAND         (1 << 22)
  46 #define CARD_ECC_FAILED         (1 << 21)
  47 #define CC_ERROR                (1 << 20)
  48 #define SD_ERROR                (1 << 19)
  49 #define CID_CSD_OVERWRITE       (1 << 16)
  50 #define WP_ERASE_SKIP           (1 << 15)
  51 #define CARD_ECC_DISABLED       (1 << 14)
  52 #define ERASE_RESET             (1 << 13)
  53 #define CURRENT_STATE           (7 << 9)
  54 #define READY_FOR_DATA          (1 << 8)
  55 #define APP_CMD                 (1 << 5)
  56 #define AKE_SEQ_ERROR           (1 << 3)
  57
  58 enum SDPhySpecificationVersion {
  59     SD_PHY_SPECv1_10_VERS     = 1,
  60     SD_PHY_SPECv2_00_VERS     = 2,
  61     SD_PHY_SPECv3_01_VERS     = 3,
  62 };
  63
  64 typedef enum {
  65     SD_VOLTAGE_0_4V     = 400,  /* currently not supported */
  66     SD_VOLTAGE_1_8V     = 1800,
  67     SD_VOLTAGE_3_0V     = 3000,
  68     SD_VOLTAGE_3_3V     = 3300,
  69 } sd_voltage_mv_t;
  70
  71 typedef enum  {
  72     UHS_NOT_SUPPORTED   = 0,
  73     UHS_I               = 1,
  74     UHS_II              = 2,    /* currently not supported */
  75     UHS_III             = 3,    /* currently not supported */
  76 } sd_uhs_mode_t;
  77
  78 typedef enum {
  79     sd_none = -1,
  80     sd_bc = 0,  /* broadcast -- no response */
  81     sd_bcr,     /* broadcast with response */
  82     sd_ac,      /* addressed -- no data transfer */
  83     sd_adtc,    /* addressed with data transfer */
  84 } sd_cmd_type_t;
  85
  86 typedef struct {
  87     uint8_t cmd;
  88     uint32_t arg;
  89     uint8_t crc;
  90 } SDRequest;
  91
  92 typedef struct SDState SDState;
  93 typedef struct SDBus SDBus;
  94
  95 #define TYPE_SD_CARD "sd-card"
  96 typedef struct SDCardClass SDCardClass;
  97 #define SD_CARD(obj) OBJECT_CHECK(SDState, (obj), TYPE_SD_CARD)
  98 #define SD_CARD_CLASS(klass) \
  99     OBJECT_CLASS_CHECK(SDCardClass, (klass), TYPE_SD_CARD)
 100 #define SD_CARD_GET_CLASS(obj) \
 101     OBJECT_GET_CLASS(SDCardClass, (obj), TYPE_SD_CARD)
 102
 103 struct SDCardClass {
 104     /*< private >*/
 105     DeviceClass parent_class;
 106     /*< public >*/
 107
 108     int (*do_command)(SDState *sd, SDRequest *req, uint8_t *response);
 109     /**
 110      * Write a byte to a SD card.
 111      * @sd: card
 112      * @value: byte to write
 113      *
 114      * Write a byte on the data lines of a SD card.
 115      */
 116     void (*write_byte)(SDState *sd, uint8_t value);
 117     /**
 118      * Read a byte from a SD card.
 119      * @sd: card
 120      *
 121      * Read a byte from the data lines of a SD card.
 122      *
 123      * Return: byte value read
 124      */
 125     uint8_t (*read_byte)(SDState *sd);
 126     bool (*data_ready)(SDState *sd);
 127     void (*set_voltage)(SDState *sd, uint16_t millivolts);
 128     uint8_t (*get_dat_lines)(SDState *sd);
 129     bool (*get_cmd_line)(SDState *sd);
 130     void (*enable)(SDState *sd, bool enable);
 131     bool (*get_inserted)(SDState *sd);
 132     bool (*get_readonly)(SDState *sd);
 133 };
 134
 135 #define TYPE_SD_BUS "sd-bus"
 136 typedef struct SDBusClass SDBusClass;
 137 #define SD_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SD_BUS)
 138 #define SD_BUS_CLASS(klass) OBJECT_CLASS_CHECK(SDBusClass, (klass), TYPE_SD_BUS)
 139 #define SD_BUS_GET_CLASS(obj) OBJECT_GET_CLASS(SDBusClass, (obj), TYPE_SD_BUS)
 140
 141 struct SDBus {
 142     BusState qbus;
 143 };
 144
 145 struct SDBusClass {
 146     /*< private >*/
 147     BusClass parent_class;
 148     /*< public >*/
 149
 150     /* These methods are called by the SD device to notify the controller
 151      * when the card insertion or readonly status changes
 152      */
 153     void (*set_inserted)(DeviceState *dev, bool inserted);
 154     void (*set_readonly)(DeviceState *dev, bool readonly);
 155 };
 156
 157 /* Functions to be used by qdevified callers (working via
 158  * an SDBus rather than directly with SDState)
 159  */
 160 void sdbus_set_voltage(SDBus *sdbus, uint16_t millivolts);
 161 uint8_t sdbus_get_dat_lines(SDBus *sdbus);
 162 bool sdbus_get_cmd_line(SDBus *sdbus);
 163 int sdbus_do_command(SDBus *sd, SDRequest *req, uint8_t *response);
 164 /**
 165  * Write a byte to a SD bus.
 166  * @sd: bus
 167  * @value: byte to write
 168  *
 169  * Write a byte on the data lines of a SD bus.
 170  */
 171 void sdbus_write_byte(SDBus *sd, uint8_t value);
 172 /**
 173  * Read a byte from a SD bus.
 174  * @sd: bus
 175  *
 176  * Read a byte from the data lines of a SD bus.
 177  *
 178  * Return: byte value read
 179  */
 180 uint8_t sdbus_read_byte(SDBus *sd);
 181 /**
 182  * Write data to a SD bus.
 183  * @sdbus: bus
 184  * @buf: data to write
 185  * @length: number of bytes to write
 186  *
 187  * Write multiple bytes of data on the data lines of a SD bus.
 188  */
 189 void sdbus_write_data(SDBus *sdbus, const void *buf, size_t length);
 190 /**
 191  * Read data from a SD bus.
 192  * @sdbus: bus
 193  * @buf: buffer to read data into
 194  * @length: number of bytes to read
 195  *
 196  * Read multiple bytes of data on the data lines of a SD bus.
 197  */
 198 void sdbus_read_data(SDBus *sdbus, void *buf, size_t length);
 199 bool sdbus_data_ready(SDBus *sd);
 200 bool sdbus_get_inserted(SDBus *sd);
 201 bool sdbus_get_readonly(SDBus *sd);
 202 /**
 203  * sdbus_reparent_card: Reparent an SD card from one controller to another
 204  * @from: controller bus to remove card from
 205  * @to: controller bus to move card to
 206  *
 207  * Reparent an SD card, effectively unplugging it from one controller
 208  * and inserting it into another. This is useful for SoCs like the
 209  * bcm2835 which have two SD controllers and connect a single SD card
 210  * to them, selected by the guest reprogramming GPIO line routing.
 211  */
 212 void sdbus_reparent_card(SDBus *from, SDBus *to);
 213
 214 /* Functions to be used by SD devices to report back to qdevified controllers */
 215 void sdbus_set_inserted(SDBus *sd, bool inserted);
 216 void sdbus_set_readonly(SDBus *sd, bool inserted);
 217
 218 #endif /* HW_SD_H */