2 # Unusual variables checked by this code:
3 # NOP - four byte opcode for no-op (defaults to none)
4 # NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
6 # SMALL_DATA_CTOR - .ctors contains small data.
7 # SMALL_DATA_DTOR - .dtors contains small data.
8 # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
9 # INITIAL_READONLY_SECTIONS - at start of text segment
10 # OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
11 # (e.g., .PARISC.milli)
12 # OTHER_TEXT_SECTIONS - these get put in .text when relocating
13 # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
14 # (e.g., .PARISC.global)
15 # OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
16 # (e.g. PPC32 .fixup, .got[12])
17 # OTHER_BSS_SECTIONS - other than .bss .sbss ...
18 # ATTRS_SECTIONS - at the end
19 # OTHER_SECTIONS - at the end
20 # EXECUTABLE_SYMBOLS - symbols that must be defined for an
21 # executable (e.g., _DYNAMIC_LINK)
22 # TEXT_START_ADDR - the first byte of the text segment, after any
24 # TEXT_BASE_ADDRESS - the first byte of the text segment.
25 # TEXT_START_SYMBOLS - symbols that appear at the start of the
27 # DATA_START_SYMBOLS - symbols that appear at the start of the
29 # DATA_END_SYMBOLS - symbols that appear at the end of the
30 # writeable data sections.
31 # OTHER_GOT_SYMBOLS - symbols defined just before .got.
32 # OTHER_GOT_SECTIONS - sections just after .got.
33 # OTHER_SDATA_SECTIONS - sections just after .sdata.
34 # OTHER_BSS_SYMBOLS - symbols that appear at the start of the
35 # .bss section besides __bss_start.
36 # DATA_PLT - .plt should be in data segment, not text segment.
37 # PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
38 # BSS_PLT - .plt should be in bss segment
39 # NO_REL_RELOCS - Don't include .rel.* sections in script
40 # NO_RELA_RELOCS - Don't include .rela.* sections in script
41 # NON_ALLOC_DYN - Place dynamic sections after data segment.
42 # TEXT_DYNAMIC - .dynamic in text segment, not data segment.
43 # EMBEDDED - whether this is for an embedded system.
44 # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
45 # start address of shared library.
46 # INPUT_FILES - INPUT command of files to always include
47 # WRITABLE_RODATA - if set, the .rodata section should be writable
48 # INIT_START, INIT_END - statements just before and just after
49 # combination of .init sections.
50 # FINI_START, FINI_END - statements just before and just after
51 # combination of .fini sections.
52 # STACK_ADDR - start of a .stack section.
53 # OTHER_SYMBOLS - symbols to place right at the end of the script.
54 # ETEXT_NAME - name of a symbol for the end of the text section,
56 # SEPARATE_CODE - if set, .text and similar sections containing
57 # actual machine instructions must be in wholly disjoint
58 # pages from any other data, including headers
59 # SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
60 # so that .got can be in the RELRO area. It should be set to
61 # the number of bytes in the beginning of .got.plt which can be
62 # in the RELRO area as well.
63 # USER_LABEL_PREFIX - prefix to add to user-visible symbols.
64 # RODATA_NAME, SDATA_NAME, SBSS_NAME, BSS_NAME - base parts of names
65 # for standard sections, without initial "." or suffixes.
67 # When adding sections, do note that the names of some sections are used
68 # when specifying the start address of the next.
71 # Many sections come in three flavours. There is the 'real' section,
72 # like ".data". Then there are the per-procedure or per-variable
73 # sections, generated by -ffunction-sections and -fdata-sections in GCC,
74 # and useful for --gc-sections, which for a variable "foo" might be
75 # ".data.foo". Then there are the linkonce sections, for which the linker
76 # eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
77 # The exact correspondences are:
79 # Section Linkonce section
80 # .text .gnu.linkonce.t.foo
81 # .rodata .gnu.linkonce.r.foo
82 # .data .gnu.linkonce.d.foo
83 # .bss .gnu.linkonce.b.foo
84 # .sdata .gnu.linkonce.s.foo
85 # .sbss .gnu.linkonce.sb.foo
86 # .sdata2 .gnu.linkonce.s2.foo
87 # .sbss2 .gnu.linkonce.sb2.foo
88 # .debug_info .gnu.linkonce.wi.foo
89 # .tdata .gnu.linkonce.td.foo
90 # .tbss .gnu.linkonce.tb.foo
91 # .lrodata .gnu.linkonce.lr.foo
92 # .ldata .gnu.linkonce.l.foo
93 # .lbss .gnu.linkonce.lb.foo
95 # Each of these can also have corresponding .rel.* and .rela.* sections.
97 if test -n "$NOP"; then
103 test -z "$RODATA_NAME" && RODATA_NAME=rodata
104 test -z "$SDATA_NAME" && SDATA_NAME=sdata
105 test -z "$SBSS_NAME" && SBSS_NAME=sbss
106 test -z "$BSS_NAME" && BSS_NAME=bss
107 test -z "$ENTRY" && ENTRY=${USER_LABEL_PREFIX}_start
108 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
109 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
110 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
111 test -z "${ELFSIZE}" && ELFSIZE=32
112 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
113 test "$LD_FLAG" = "N" && DATA_ADDR=.
114 test -z "${ETEXT_NAME}" && ETEXT_NAME=${USER_LABEL_PREFIX}etext
115 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
116 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
117 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
118 test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
119 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
120 DATA_SEGMENT_RELRO_END=""
122 if test -n "${COMMONPAGESIZE}"; then
123 DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
124 DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
125 DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
127 if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
128 INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
130 if test -z "$PLT"; then
131 IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }"
132 PLT=".plt ${RELOCATING-0} : { *(.plt)${IREL_IN_PLT+ *(.iplt)} }
133 ${IREL_IN_PLT-$IPLT}"
135 test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
136 if test -z "$GOT"; then
137 if test -z "$SEPARATE_GOTPLT"; then
138 GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }"
140 GOT=".got ${RELOCATING-0} : { *(.got) *(.igot) }"
141 GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) }"
144 REL_IFUNC=".rel.ifunc ${RELOCATING-0} : { *(.rel.ifunc) }"
145 RELA_IFUNC=".rela.ifunc ${RELOCATING-0} : { *(.rela.ifunc) }"
146 REL_IPLT=".rel.iplt ${RELOCATING-0} :
148 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}
150 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}
152 RELA_IPLT=".rela.iplt ${RELOCATING-0} :
154 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}
156 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}
158 DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
159 RODATA=".${RODATA_NAME} ${RELOCATING-0} : { *(.${RODATA_NAME}${RELOCATING+ .${RODATA_NAME}.* .gnu.linkonce.r.*}) }"
160 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }"
161 DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
162 if test -z "${NO_SMALL_DATA}"; then
163 SBSS=".${SBSS_NAME} ${RELOCATING-0} :
165 ${RELOCATING+${SBSS_START_SYMBOLS}}
166 ${CREATE_SHLIB+*(.${SBSS_NAME}2 .${SBSS_NAME}2.* .gnu.linkonce.sb2.*)}
168 *(.${SBSS_NAME}${RELOCATING+ .${SBSS_NAME}.* .gnu.linkonce.sb.*})
170 ${RELOCATING+${SBSS_END_SYMBOLS}}
172 SBSS2=".${SBSS_NAME}2 ${RELOCATING-0} : { *(.${SBSS_NAME}2${RELOCATING+ .${SBSS_NAME}2.* .gnu.linkonce.sb2.*}) }"
173 SDATA="/* We want the small data sections together, so single-instruction offsets
174 can access them all, and initialized data all before uninitialized, so
175 we can shorten the on-disk segment size. */
176 .${SDATA_NAME} ${RELOCATING-0} :
178 ${RELOCATING+${SDATA_START_SYMBOLS}}
179 ${CREATE_SHLIB+*(.${SDATA_NAME}2 .${SDATA_NAME}2.* .gnu.linkonce.s2.*)}
180 *(.${SDATA_NAME}${RELOCATING+ .${SDATA_NAME}.* .gnu.linkonce.s.*})
182 SDATA2=".${SDATA_NAME}2 ${RELOCATING-0} :
184 ${RELOCATING+${SDATA2_START_SYMBOLS}}
185 *(.${SDATA_NAME}2${RELOCATING+ .${SDATA_NAME}2.* .gnu.linkonce.s2.*})
187 REL_SDATA=".rel.${SDATA_NAME} ${RELOCATING-0} : { *(.rel.${SDATA_NAME}${RELOCATING+ .rel.${SDATA_NAME}.* .rel.gnu.linkonce.s.*}) }
188 .rela.${SDATA_NAME} ${RELOCATING-0} : { *(.rela.${SDATA_NAME}${RELOCATING+ .rela.${SDATA_NAME}.* .rela.gnu.linkonce.s.*}) }"
189 REL_SBSS=".rel.${SBSS_NAME} ${RELOCATING-0} : { *(.rel.${SBSS_NAME}${RELOCATING+ .rel.${SBSS_NAME}.* .rel.gnu.linkonce.sb.*}) }
190 .rela.${SBSS_NAME} ${RELOCATING-0} : { *(.rela.${SBSS_NAME}${RELOCATING+ .rela.${SBSS_NAME}.* .rela.gnu.linkonce.sb.*}) }"
191 REL_SDATA2=".rel.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rel.${SDATA_NAME}2${RELOCATING+ .rel.${SDATA_NAME}2.* .rel.gnu.linkonce.s2.*}) }
192 .rela.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rela.${SDATA_NAME}2${RELOCATING+ .rela.${SDATA_NAME}2.* .rela.gnu.linkonce.s2.*}) }"
193 REL_SBSS2=".rel.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rel.${SBSS_NAME}2${RELOCATING+ .rel.${SBSS_NAME}2.* .rel.gnu.linkonce.sb2.*}) }
194 .rela.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rela.${SBSS_NAME}2${RELOCATING+ .rela.${SBSS_NAME}2.* .rela.gnu.linkonce.sb2.*}) }"
198 if test -z "${DATA_GOT}"; then
199 if test -n "${NO_SMALL_DATA}"; then
203 if test -z "${SDATA_GOT}"; then
204 if test -z "${NO_SMALL_DATA}"; then
208 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
209 test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
210 .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
211 .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
212 .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
213 .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
214 .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
215 .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
216 test "${LARGE_SECTIONS}" = "yes" && LARGE_BSS="
217 .lbss ${RELOCATING-0} :
220 *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
223 test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
224 .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
226 *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
228 .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
230 *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
231 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
233 if test "${ENABLE_INITFINI_ARRAY}" = "yes"; then
234 SORT_INIT_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))"
235 SORT_FINI_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))"
236 CTORS_IN_INIT_ARRAY="KEEP (*(EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))"
237 DTORS_IN_FINI_ARRAY="KEEP (*(EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))"
239 SORT_INIT_ARRAY="KEEP (*(SORT(.init_array.*)))"
240 SORT_FINI_ARRAY="KEEP (*(SORT(.fini_array.*)))"
244 INIT_ARRAY=".init_array ${RELOCATING-0} :
246 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
248 KEEP (*(.init_array))
249 ${CTORS_IN_INIT_ARRAY}
250 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
252 FINI_ARRAY=".fini_array ${RELOCATING-0} :
254 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
256 KEEP (*(.fini_array))
257 ${DTORS_IN_FINI_ARRAY}
258 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
260 CTOR=".ctors ${CONSTRUCTING-0} :
262 ${CONSTRUCTING+${CTOR_START}}
263 /* gcc uses crtbegin.o to find the start of
264 the constructors, so we make sure it is
265 first. Because this is a wildcard, it
266 doesn't matter if the user does not
267 actually link against crtbegin.o; the
268 linker won't look for a file to match a
269 wildcard. The wildcard also means that it
270 doesn't matter which directory crtbegin.o
273 KEEP (*crtbegin.o(.ctors))
274 KEEP (*crtbegin?.o(.ctors))
276 /* We don't want to include the .ctor section from
277 the crtend.o file until after the sorted ctors.
278 The .ctor section from the crtend file contains the
279 end of ctors marker and it must be last */
281 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
282 KEEP (*(SORT(.ctors.*)))
284 ${CONSTRUCTING+${CTOR_END}}
286 DTOR=".dtors ${CONSTRUCTING-0} :
288 ${CONSTRUCTING+${DTOR_START}}
289 KEEP (*crtbegin.o(.dtors))
290 KEEP (*crtbegin?.o(.dtors))
291 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
292 KEEP (*(SORT(.dtors.*)))
294 ${CONSTRUCTING+${DTOR_END}}
296 STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
298 ${RELOCATING+${USER_LABEL_PREFIX}_stack = .;}
302 TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})"
303 SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})"
305 if [ -z "$SEPARATE_CODE" ]; then
306 SIZEOF_HEADERS_CODE=" + SIZEOF_HEADERS"
311 # if this is for an embedded system, don't add SIZEOF_HEADERS.
312 if [ -z "$EMBEDDED" ]; then
313 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}${SIZEOF_HEADERS_CODE}"
315 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
319 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
320 "${LITTLE_OUTPUT_FORMAT}")
321 OUTPUT_ARCH(${OUTPUT_ARCH})
322 ${RELOCATING+ENTRY(${ENTRY})}
324 ${RELOCATING+${LIB_SEARCH_DIRS}}
325 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
326 ${RELOCATING+${INPUT_FILES}}
327 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
328 if gld -r is used and the intermediate file has sections starting
329 at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
330 bug. But for now assigning the zero vmas works. */}
334 /* Read-only sections, merged into text segment: */
335 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
336 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}
337 ${CREATE_PIE+${RELOCATING+PROVIDE (__executable_start = ${SHLIB_TEXT_START_ADDR}); . = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}
343 ${INITIAL_READONLY_SECTIONS}
344 .note.gnu.build-id : { *(.note.gnu.build-id) }
348 test -n "${SEPARATE_CODE}" || emit_early_ro
350 test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN
351 test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
352 cat > ldscripts/dyntmp.$$ <<EOF
353 ${TEXT_DYNAMIC+${DYNAMIC}}
354 .hash ${RELOCATING-0} : { *(.hash) }
355 .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
356 .dynsym ${RELOCATING-0} : { *(.dynsym) }
357 .dynstr ${RELOCATING-0} : { *(.dynstr) }
358 .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
359 .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
360 .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
363 if [ "x$COMBRELOC" = x ]; then
364 COMBRELOCCAT="cat >> ldscripts/dyntmp.$$"
366 COMBRELOCCAT="cat > $COMBRELOC"
368 eval $COMBRELOCCAT <<EOF
369 ${INITIAL_RELOC_SECTIONS}
370 .rel.init ${RELOCATING-0} : { *(.rel.init) }
371 .rela.init ${RELOCATING-0} : { *(.rela.init) }
372 .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
373 .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
374 .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
375 .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
376 .rel.${RODATA_NAME} ${RELOCATING-0} : { *(.rel.${RODATA_NAME}${RELOCATING+ .rel.${RODATA_NAME}.* .rel.gnu.linkonce.r.*}) }
377 .rela.${RODATA_NAME} ${RELOCATING-0} : { *(.rela.${RODATA_NAME}${RELOCATING+ .rela.${RODATA_NAME}.* .rela.gnu.linkonce.r.*}) }
378 ${OTHER_READONLY_RELOC_SECTIONS}
379 .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) }
380 .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) }
381 .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
382 .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
383 ${OTHER_READWRITE_RELOC_SECTIONS}
384 .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
385 .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
386 .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
387 .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
388 .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
389 .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
390 .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
391 .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
392 .rel.got ${RELOCATING-0} : { *(.rel.got) }
393 .rela.got ${RELOCATING-0} : { *(.rela.got) }
394 ${OTHER_GOT_RELOC_SECTIONS}
399 .rel.${BSS_NAME} ${RELOCATING-0} : { *(.rel.${BSS_NAME}${RELOCATING+ .rel.${BSS_NAME}.* .rel.gnu.linkonce.b.*}) }
400 .rela.${BSS_NAME} ${RELOCATING-0} : { *(.rela.${BSS_NAME}${RELOCATING+ .rela.${BSS_NAME}.* .rela.gnu.linkonce.b.*}) }
402 ${IREL_IN_PLT+$REL_IFUNC}
403 ${IREL_IN_PLT+$RELA_IFUNC}
404 ${IREL_IN_PLT-$REL_IPLT}
405 ${IREL_IN_PLT-$RELA_IPLT}
408 if [ -n "$COMBRELOC" ]; then
409 cat >> ldscripts/dyntmp.$$ <<EOF
410 .rel.dyn ${RELOCATING-0} :
413 sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
414 cat >> ldscripts/dyntmp.$$ <<EOF
416 .rela.dyn ${RELOCATING-0} :
419 sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
420 cat >> ldscripts/dyntmp.$$ <<EOF
425 cat >> ldscripts/dyntmp.$$ <<EOF
426 .rel.plt ${RELOCATING-0} :
429 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}}
430 ${IREL_IN_PLT+${RELOCATING+*(.rel.iplt)}}
431 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}}
433 .rela.plt ${RELOCATING-0} :
436 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}}
437 ${IREL_IN_PLT+${RELOCATING+*(.rela.iplt)}}
438 ${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}}
440 ${OTHER_PLT_RELOC_SECTIONS}
445 if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
446 cat ldscripts/dyntmp.$$
448 if test -z "${NO_REL_RELOCS}"; then
449 sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$
451 if test -z "${NO_RELA_RELOCS}"; then
452 sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$
455 rm -f ldscripts/dyntmp.$$
458 test -n "${NON_ALLOC_DYN}${SEPARATE_CODE}" || emit_dyn
461 .init ${RELOCATING-0} :
463 ${RELOCATING+${INIT_START}}
464 KEEP (*(SORT_NONE(.init)))
465 ${RELOCATING+${INIT_END}}
469 ${TINY_READONLY_SECTION}
470 .text ${RELOCATING-0} :
472 ${RELOCATING+${TEXT_START_SYMBOLS}}
473 ${RELOCATING+*(.text.unlikely .text.*_unlikely)}
474 ${RELOCATING+*(.text.exit .text.exit.*)}
475 ${RELOCATING+*(.text.startup .text.startup.*)}
476 ${RELOCATING+*(.text.hot .text.hot.*)}
477 *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
478 /* .gnu.warning sections are handled specially by elf32.em. */
480 ${RELOCATING+${OTHER_TEXT_SECTIONS}}
482 .fini ${RELOCATING-0} :
484 ${RELOCATING+${FINI_START}}
485 KEEP (*(SORT_NONE(.fini)))
486 ${RELOCATING+${FINI_END}}
488 ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
489 ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
490 ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
493 if test -n "${SEPARATE_CODE}"; then
494 if test -n "${RODATA_ADDR}"; then
496 SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
498 RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
499 RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
501 if test -n "${SHLIB_RODATA_ADDR}"; then
503 SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
505 SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
506 SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
509 /* Adjust the address for the rodata segment. We want to adjust up to
510 the same address within the page on the next page up. */
511 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${RODATA_ADDR};}}}
512 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_RODATA_ADDR};}}
513 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_RODATA_ADDR};}}
520 ${WRITABLE_RODATA-${RODATA}}
521 .${RODATA_NAME}1 ${RELOCATING-0} : { *(.${RODATA_NAME}1) }
522 ${CREATE_SHLIB-${SDATA2}}
523 ${CREATE_SHLIB-${SBSS2}}
524 ${OTHER_READONLY_SECTIONS}
525 .eh_frame_hdr : { *(.eh_frame_hdr) }
526 .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
527 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table
528 .gcc_except_table.*) }
529 /* These sections are generated by the Sun/Oracle C++ compiler. */
530 .exception_ranges ${RELOCATING-0} : ONLY_IF_RO { *(.exception_ranges
531 .exception_ranges*) }
533 /* Adjust the address for the data segment. We want to adjust up to
534 the same address within the page on the next page up. */
535 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
536 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
537 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
539 /* Exception handling */
540 .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
541 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
542 .exception_ranges ${RELOCATING-0} : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
544 /* Thread Local Storage sections */
545 .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
546 .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
548 .preinit_array ${RELOCATING-0} :
550 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
551 KEEP (*(.preinit_array))
552 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
554 ${RELOCATING+${INIT_ARRAY}}
555 ${RELOCATING+${FINI_ARRAY}}
556 ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
557 ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
558 .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
560 ${RELOCATING+${DATARELRO}}
561 ${OTHER_RELRO_SECTIONS}
562 ${TEXT_DYNAMIC-${DYNAMIC}}
563 ${DATA_GOT+${RELRO_NOW+${GOT}}}
564 ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
565 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
566 ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
567 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
568 ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
570 ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
572 .data ${RELOCATING-0} :
574 ${RELOCATING+${DATA_START_SYMBOLS}}
575 *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
576 ${CONSTRUCTING+SORT(CONSTRUCTORS)}
578 .data1 ${RELOCATING-0} : { *(.data1) }
579 ${WRITABLE_RODATA+${RODATA}}
580 ${OTHER_READWRITE_SECTIONS}
581 ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
582 ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
583 ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
584 ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS+. = .; ${OTHER_GOT_SYMBOLS}}}}
586 ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
588 ${OTHER_SDATA_SECTIONS}
589 ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
591 ${RELOCATING+${USER_LABEL_PREFIX}__bss_start = .;}
592 ${RELOCATING+${OTHER_BSS_SYMBOLS}}
595 .${BSS_NAME} ${RELOCATING-0} :
598 *(.${BSS_NAME}${RELOCATING+ .${BSS_NAME}.* .gnu.linkonce.b.*})
600 /* Align here to ensure that the .bss section occupies space up to
601 _end. Align after .bss to ensure correct alignment even if the
602 .bss section disappears because there are no input sections.
603 FIXME: Why do we need it? When there is no .bss section, we don't
604 pad the .data section. */
605 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
607 ${OTHER_BSS_SECTIONS}
608 ${LARGE_BSS_AFTER_BSS+${LARGE_BSS}}
609 ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
610 ${RELOCATING+. = ALIGN(${ALIGNMENT});}
613 LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${LARGE_DATA_ADDR-.});"
614 SHLIB_LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${SHLIB_LARGE_DATA_ADDR-.});"
617 ${RELOCATING+${CREATE_SHLIB-${CREATE_PIE-${LARGE_DATA_ADDR}}}}
618 ${RELOCATING+${CREATE_SHLIB+${SHLIB_LARGE_DATA_ADDR}}}
619 ${RELOCATING+${CREATE_PIE+${SHLIB_LARGE_DATA_ADDR}}}
621 ${LARGE_BSS_AFTER_BSS-${LARGE_BSS}}
622 ${RELOCATING+. = ALIGN(${ALIGNMENT});}
623 ${RELOCATING+${OTHER_END_SYMBOLS}}
624 ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
625 ${RELOCATING+${DATA_SEGMENT_END}}
628 test -z "${NON_ALLOC_DYN}" || emit_dyn
631 /* Stabs debugging sections. */
632 .stab 0 : { *(.stab) }
633 .stabstr 0 : { *(.stabstr) }
634 .stab.excl 0 : { *(.stab.excl) }
635 .stab.exclstr 0 : { *(.stab.exclstr) }
636 .stab.index 0 : { *(.stab.index) }
637 .stab.indexstr 0 : { *(.stab.indexstr) }
639 .comment 0 : { *(.comment) }
641 /* DWARF debug sections.
642 Symbols in the DWARF debugging sections are relative to the beginning
643 of the section so we begin them at 0. */
646 .debug 0 : { *(.debug) }
647 .line 0 : { *(.line) }
649 /* GNU DWARF 1 extensions */
650 .debug_srcinfo 0 : { *(.debug_srcinfo) }
651 .debug_sfnames 0 : { *(.debug_sfnames) }
653 /* DWARF 1.1 and DWARF 2 */
654 .debug_aranges 0 : { *(.debug_aranges) }
655 .debug_pubnames 0 : { *(.debug_pubnames) }
658 .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
659 .debug_abbrev 0 : { *(.debug_abbrev) }
660 .debug_line 0 : { *(.debug_line) }
661 .debug_frame 0 : { *(.debug_frame) }
662 .debug_str 0 : { *(.debug_str) }
663 .debug_loc 0 : { *(.debug_loc) }
664 .debug_macinfo 0 : { *(.debug_macinfo) }
666 /* SGI/MIPS DWARF 2 extensions */
667 .debug_weaknames 0 : { *(.debug_weaknames) }
668 .debug_funcnames 0 : { *(.debug_funcnames) }
669 .debug_typenames 0 : { *(.debug_typenames) }
670 .debug_varnames 0 : { *(.debug_varnames) }
673 .debug_pubtypes 0 : { *(.debug_pubtypes) }
674 .debug_ranges 0 : { *(.debug_ranges) }
676 /* DWARF Extension. */
677 .debug_macro 0 : { *(.debug_macro) }
682 ${STACK_ADDR+${STACK}}
685 ${RELOCATING+${OTHER_SYMBOLS}}
686 ${RELOCATING+${DISCARDED}}