]>
git.ipfire.org Git - people/ms/u-boot.git/blob - lib_mips/board.c
12df61fdde3734c88fb1933d49f95fc661d5d88a
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 #include <environment.h>
32 #if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
33 (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
34 defined(CFG_ENV_IS_IN_NVRAM)
35 #define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
37 #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
42 extern int timer_init(void);
44 extern int incaip_set_cpuclk(void);
46 extern ulong uboot_end_data
;
47 extern ulong uboot_end
;
49 ulong monitor_flash_len
;
51 const char version_string
[] =
52 U_BOOT_VERSION
" (" __DATE__
" - " __TIME__
")";
54 static char *failed
= "*** failed ***\n";
57 * Begin and End of memory area for malloc(), and current "brk"
59 static ulong mem_malloc_start
;
60 static ulong mem_malloc_end
;
61 static ulong mem_malloc_brk
;
65 * The Malloc area is immediately below the monitor copy in DRAM
67 static void mem_malloc_init (void)
69 DECLARE_GLOBAL_DATA_PTR
;
71 ulong dest_addr
= CFG_MONITOR_BASE
+ gd
->reloc_off
;
73 mem_malloc_end
= dest_addr
;
74 mem_malloc_start
= dest_addr
- TOTAL_MALLOC_LEN
;
75 mem_malloc_brk
= mem_malloc_start
;
77 memset ((void *) mem_malloc_start
,
79 mem_malloc_end
- mem_malloc_start
);
82 void *sbrk (ptrdiff_t increment
)
84 ulong old
= mem_malloc_brk
;
85 ulong
new = old
+ increment
;
87 if ((new < mem_malloc_start
) || (new > mem_malloc_end
)) {
91 return ((void *) old
);
95 static int init_func_ram (void)
97 DECLARE_GLOBAL_DATA_PTR
;
99 #ifdef CONFIG_BOARD_TYPES
100 int board_type
= gd
->board_type
;
102 int board_type
= 0; /* use dummy arg */
106 if ((gd
->ram_size
= initdram (board_type
)) > 0) {
107 print_size (gd
->ram_size
, "\n");
114 static int display_banner(void)
117 printf ("\n\n%s\n\n", version_string
);
121 static void display_flash_config(ulong size
)
124 print_size (size
, "\n");
128 static int init_baudrate (void)
130 DECLARE_GLOBAL_DATA_PTR
;
132 uchar tmp
[64]; /* long enough for environment variables */
133 int i
= getenv_r ("baudrate", tmp
, sizeof (tmp
));
135 gd
->baudrate
= (i
> 0)
136 ? (int) simple_strtoul (tmp
, NULL
, 10)
144 * Breath some life into the board...
146 * The first part of initialization is running from Flash memory;
147 * its main purpose is to initialize the RAM so that we
148 * can relocate the monitor code to RAM.
152 * All attempts to come up with a "common" initialization sequence
153 * that works for all boards and architectures failed: some of the
154 * requirements are just _too_ different. To get rid of the resulting
155 * mess of board dependend #ifdef'ed code we now make the whole
156 * initialization sequence configurable to the user.
158 * The requirements for any new initalization function is simple: it
159 * receives a pointer to the "global data" structure as it's only
160 * argument, and returns an integer return code, where 0 means
161 * "continue" and != 0 means "fatal error, hang the system".
163 typedef int (init_fnc_t
) (void);
165 init_fnc_t
*init_sequence
[] = {
167 env_init
, /* initialize environment */
168 #ifdef CONFIG_INCA_IP
169 incaip_set_cpuclk
, /* set cpu clock according to environment variable */
171 init_baudrate
, /* initialze baudrate settings */
172 serial_init
, /* serial communications setup */
174 display_banner
, /* say that we are here */
181 void board_init_f(ulong bootflag
)
183 DECLARE_GLOBAL_DATA_PTR
;
187 init_fnc_t
**init_fnc_ptr
;
188 ulong addr
, addr_sp
, len
= (ulong
)&uboot_end
- CFG_MONITOR_BASE
;
190 void copy_code (ulong
);
193 /* Pointer is writable since we allocated a register for it.
196 /* compiler optimization barrier needed for GCC >= 3.4 */
197 __asm__
__volatile__("": : :"memory");
199 memset ((void *)gd
, 0, sizeof (gd_t
));
201 for (init_fnc_ptr
= init_sequence
; *init_fnc_ptr
; ++init_fnc_ptr
) {
202 if ((*init_fnc_ptr
)() != 0) {
208 * Now that we have DRAM mapped and working, we can
209 * relocate the code and continue running from DRAM.
211 addr
= CFG_SDRAM_BASE
+ gd
->ram_size
;
213 /* We can reserve some RAM "on top" here.
216 /* round down to next 4 kB limit.
219 debug ("Top of RAM usable for U-Boot at: %08lx\n", addr
);
221 /* Reserve memory for U-Boot code, data & bss
222 * round down to next 16 kB limit
225 addr
&= ~(16 * 1024 - 1);
227 debug ("Reserving %ldk for U-Boot at: %08lx\n", len
>> 10, addr
);
229 /* Reserve memory for malloc() arena.
231 addr_sp
= addr
- TOTAL_MALLOC_LEN
;
232 debug ("Reserving %dk for malloc() at: %08lx\n",
233 TOTAL_MALLOC_LEN
>> 10, addr_sp
);
236 * (permanently) allocate a Board Info struct
237 * and a permanent copy of the "global" data
239 addr_sp
-= sizeof(bd_t
);
240 bd
= (bd_t
*)addr_sp
;
242 debug ("Reserving %d Bytes for Board Info at: %08lx\n",
243 sizeof(bd_t
), addr_sp
);
245 addr_sp
-= sizeof(gd_t
);
246 id
= (gd_t
*)addr_sp
;
247 debug ("Reserving %d Bytes for Global Data at: %08lx\n",
248 sizeof (gd_t
), addr_sp
);
250 /* Reserve memory for boot params.
252 addr_sp
-= CFG_BOOTPARAMS_LEN
;
253 bd
->bi_boot_params
= addr_sp
;
254 debug ("Reserving %dk for boot params() at: %08lx\n",
255 CFG_BOOTPARAMS_LEN
>> 10, addr_sp
);
258 * Finally, we set up a new (bigger) stack.
260 * Leave some safety gap for SP, force alignment on 16 byte boundary
261 * Clear initial stack frame
265 *((ulong
*) addr_sp
)-- = 0;
266 *((ulong
*) addr_sp
)-- = 0;
267 debug ("Stack Pointer at: %08lx\n", addr_sp
);
270 * Save local variables to board info struct
272 bd
->bi_memstart
= CFG_SDRAM_BASE
; /* start of DRAM memory */
273 bd
->bi_memsize
= gd
->ram_size
; /* size of DRAM memory in bytes */
274 bd
->bi_baudrate
= gd
->baudrate
; /* Console Baudrate */
276 memcpy (id
, (void *)gd
, sizeof (gd_t
));
278 /* On the purple board we copy the code in a special way
279 * in order to solve flash problems
285 relocate_code (addr_sp
, id
, addr
);
287 /* NOTREACHED - relocate_code() does not return */
289 /************************************************************************
291 * This is the next part if the initialization sequence: we are now
292 * running from RAM and have a "normal" C environment, i. e. global
293 * data can be written, BSS has been cleared, the stack size in not
294 * that critical any more, etc.
296 ************************************************************************
299 void board_init_r (gd_t
*id
, ulong dest_addr
)
301 DECLARE_GLOBAL_DATA_PTR
;
304 extern void malloc_bin_reloc (void);
305 #ifndef CFG_ENV_IS_NOWHERE
306 extern char * env_name_spec
;
313 gd
->flags
|= GD_FLG_RELOC
; /* tell others: relocation done */
315 debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr
);
317 gd
->reloc_off
= dest_addr
- CFG_MONITOR_BASE
;
319 monitor_flash_len
= (ulong
)&uboot_end_data
- dest_addr
;
322 * We have to relocate the command table manually
324 for (cmdtp
= &__u_boot_cmd_start
; cmdtp
!= &__u_boot_cmd_end
; cmdtp
++) {
327 addr
= (ulong
) (cmdtp
->cmd
) + gd
->reloc_off
;
329 printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
330 cmdtp
->name
, (ulong
) (cmdtp
->cmd
), addr
);
333 (int (*)(struct cmd_tbl_s
*, int, int, char *[]))addr
;
335 addr
= (ulong
)(cmdtp
->name
) + gd
->reloc_off
;
336 cmdtp
->name
= (char *)addr
;
339 addr
= (ulong
)(cmdtp
->usage
) + gd
->reloc_off
;
340 cmdtp
->usage
= (char *)addr
;
344 addr
= (ulong
)(cmdtp
->help
) + gd
->reloc_off
;
345 cmdtp
->help
= (char *)addr
;
349 /* there are some other pointer constants we must deal with */
350 #ifndef CFG_ENV_IS_NOWHERE
351 env_name_spec
+= gd
->reloc_off
;
354 /* configure available FLASH banks */
356 display_flash_config (size
);
359 bd
->bi_flashstart
= CFG_FLASH_BASE
;
360 bd
->bi_flashsize
= size
;
361 #if CFG_MONITOR_BASE == CFG_FLASH_BASE
362 bd
->bi_flashoffset
= monitor_flash_len
; /* reserved area for U-Boot */
364 bd
->bi_flashoffset
= 0;
367 /* initialize malloc() area */
371 /* relocate environment function pointers etc. */
374 /* board MAC address */
375 s
= getenv ("ethaddr");
376 for (i
= 0; i
< 6; ++i
) {
377 bd
->bi_enetaddr
[i
] = s
? simple_strtoul (s
, &e
, 16) : 0;
379 s
= (*e
) ? e
+ 1 : e
;
383 bd
->bi_ip_addr
= getenv_IPaddr("ipaddr");
385 #if defined(CONFIG_PCI)
387 * Do pci configuration
392 /** leave this here (after malloc(), environment and PCI are working) **/
393 /* Initialize devices */
398 /* Initialize the console (after the relocation and devices init) */
400 /** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
402 /* Initialize from environment */
403 if ((s
= getenv ("loadaddr")) != NULL
) {
404 load_addr
= simple_strtoul (s
, NULL
, 16);
406 #if (CONFIG_COMMANDS & CFG_CMD_NET)
407 if ((s
= getenv ("bootfile")) != NULL
) {
408 copy_filename (BootFile
, s
, sizeof (BootFile
));
410 #endif /* CFG_CMD_NET */
412 #if defined(CONFIG_MISC_INIT_R)
413 /* miscellaneous platform dependent initialisations */
417 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
419 eth_initialize(gd
->bd
);
422 /* main_loop() can return to retry autoboot, if so just run it again. */
427 /* NOTREACHED - no way out of command loop except booting */
432 puts ("### ERROR ### Please RESET the board ###\n");