]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - opcodes/ChangeLog
Remove ByteOkIntel.
[thirdparty/binutils-gdb.git] / opcodes / ChangeLog
1 2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
2
3 * i386-gen.c (opcode_modifiers): Remove ByteOkIntel.
4
5 * i386-opc.h (ByteOkIntel): Removed.
6 (i386_opcode_modifier): Remove byteokintel.
7
8 * i386-opc.tbl: Remove ByteOkIntel.
9 * i386-tbl.h: Regenerated.
10
11 2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
12
13 * i386-gen.c (opcode_modifiers): Remove Vex0F, Vex0F38,
14 Vex0F3A, XOP08, XOP09 and XOP0A. Add VexOpcode.
15
16 * i386-opc.h (Vex0F): Removed.
17 (Vex0F38): Likewise.
18 (Vex0F3A): Likewise.
19 (VexOpcode): New.
20 (VEX0F): Likewise.
21 (VEX0F38): Likewise.
22 (VEX0F3A): Likewise.
23 (XOP08): Defined as a macro.
24 (XOP09): Likewise.
25 (XOP0A): Likewise.
26 (i386_opcode_modifier): Remove vex0f, vex0f38, vex0f3a, xop08,
27 xop09 and xop0a. Add vexopcode.
28
29 * i386-opc.tbl: Replace Vex0F with VexOpcode=0, Vex0F38 with
30 VexOpcode=1, Vex0F3A with VexOpcode=2, XOP08 with VexOpcode=3,
31 XOP09 with VexOpcode=4 and XOP0A with VexOpcode=5.
32 * i386-tbl.h: Regenerated.
33
34 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
35
36 * i386-opc.h (VEX2SOURCES): Renamed to ...
37 (XOP2SOURCES): This.
38
39 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
40
41 * i386-gen.c (opcode_modifiers): Remove Vex3Sources and
42 Vex2Sources. Add VexSources.
43
44 * i386-opc.h (Vex2Sources): Removed.
45 (Vex3Sources): Likewise.
46 (VEX2SOURCES): New.
47 (VEX3SOURCES): Likewise.
48 (VexSources): Likewise.
49 (i386_opcode_modifier): Remove vex2sources and vex3sources.
50 Add vexsources.
51
52 * i386-opc.tbl: Replace Vex2Sources with VexSources=1 and
53 Vex3Sourceswith VexSources=2.
54 * i386-tbl.h: Regenerated.
55
56 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
57
58 * i386-gen.c (opcode_modifiers): Remove VexW0 and VexW1. Add
59 VexW.
60
61 * i386-opc.h (VexW0): Removed.
62 (VexW1): Likewise.
63 (VEXW0): New.
64 (VEXW1): Likewise.
65 (VexW): Likewise.
66 (i386_opcode_modifier): Remove vexw0 and vexw1. Add vexw.
67
68 * i386-opc.tbl: Replace VexW0 with VexW=1 and VexW1 with
69 Vex=2.
70 * i386-tbl.h: Regenerated.
71
72 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
73
74 * i386-dis.c (VEX_W_3818_P_2_M_0): New.
75 (vex_w_table): Add VEX_W_3818_P_2_M_0.
76 (mod_table): Use VEX_W_3818_P_2_M_0.
77
78 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
79
80 * i386-dis.c (vex_w_table): Reformat.
81
82 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
83
84 * i386-dis.c (VEX_W_382X_P_2_M_0): New.
85 (vex_w_table): Add VEX_W_382X_P_2_M_0.
86 (mod_table): Use VEX_W_382X_P_2_M_0.
87
88 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
89
90 * i386-dis.c (vex_w_table): Reformat.
91
92 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
93
94 * i386-dis.c (USE_VEX_W_TABLE): New.
95 (VEX_W_TABLE): Likewise.
96 (VEX_W_XXX): Likewise.
97 (vex_w_table): Likewise.
98 (prefix_table): Use VEX_W_XXX.
99 (vex_table): Likewise.
100 (vex_len_table): Likewise.
101 (mod_table): Likewise.
102 (get_valid_dis386): Handle USE_VEX_W_TABLE.
103
104 * i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
105 isn't used.
106 * i386-tbl.h: Regenerated.
107
108 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
109
110 * i386-opc.h (VEX128): New.
111 (VEX256): Likewise.
112
113 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
114
115 * i386-dis.c (vex_len_table): Reformat.
116
117 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
118
119 * i386-dis.c (MOD_VEX_51): Renamed to ...
120 (MOD_VEX_50): This.
121 (vex_table): Updated.
122 (mod_table): Likewise.
123
124 2009-12-14 Nick Clifton <nickc@redhat.com>
125
126 PR binutils/10924
127 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
128 results in unpredictable behaviour.
129 (print_insn_arm): Handle %R.
130
131 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
132
133 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
134 prefix.
135 (print_insn): Don't set vex.w here.
136
137 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
138
139 * i386-dis.c (print_insn): Set vex.w to 0.
140
141 2009-12-11 Quentin Neill <quentin.neill@amd.com>
142
143 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
144 to avoid fetching ahead for the immediate bytes when OP_E_memory
145 has already been called. Fix indentation.
146
147 2009-12-11 Nick Clifton <nickc@redhat.com>
148
149 * Makefile.in: Regenerate.
150 * configure: Regenerate.
151 * arm-dis.c: Fix shadowed variable warnings.
152 * cgen-opc.c: Likewise.
153 * cr16-dis.c: Likewise.
154 * crx-dis.c: Likewise.
155 * d30v-dis.c: Likewise.
156 * fr30-dis.c: Likewise.
157 * frv-opc.c: Likewise.
158 * h8500-dis.c: Likewise.
159 * i386-dis.c: Likewise.
160 * i960-dis.c: Likewise.
161 * ia64-gen.c: Likewise.
162 * ia64-opc.c: Likewise.
163 * m32c-asm.c: Likewise.
164 * m32c-dis.c: Likewise.
165 * m68k-dis.c: Likewise.
166 * maxq-dis.c: Likewise.
167 * mcore-dis.c: Likewise.
168 * mep-asm.c: Likewise.
169 * microblaze-dis.c: Likewise.
170 * mmix-dis.c: Likewise.
171 * ns32k-dis.c: Likewise.
172 * or32-opc.c: Likewise.
173 * s390-dis.c: Likewise.
174 * sh64-dis.c: Likewise.
175 * spu-dis.c: Likewise.
176 * tic30-dis.c: Likewise.
177
178 2009-12-09 Nick Clifton <nickc@redhat.com>
179
180 PR 10924
181 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
182 post-indexed addressing as unpredictable.
183
184 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
185
186 * i386-dis.c (FXSAVE_Fixup): New.
187 (FXSAVE): Likewise.
188 (mod_table): Use FXSAVE on fxsave and fxrstor.
189
190 * i386-opc.tbl: Add fxsave64 and fxrstor64.
191 * i386-tbl.h: Regenerated.
192
193 2009-12-02 Nick Clifton <nickc@redhat.com>
194 Richard Earnshaw <rearnsha@arm.com>
195
196 PR gas/11013
197 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
198 and QDSUB.
199
200 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
201
202 PR gas/11030
203 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
204 Coldfire ISA A+.
205
206 2009-11-17 Quentin Neill <quentin.neill@amd.com>
207 Sebastian Pop <sebastian.pop@amd.com>
208
209 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
210 decoding the second source operand from the immediate byte.
211 (OP_EX_VexW): Pass an extra integer to identify the second
212 and third source arguments.
213
214 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
215
216 * i386-opc.tbl: Add IsLockable to cmpxch16b.
217 * i386-tbl.h: Regenerated.
218
219 2009-11-19 Nick Clifton <nickc@redhat.com>
220
221 PR binutils/10924
222 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
223 decoding Immediaate Offset addressing.
224
225 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
226
227 PR binutils/10973
228 * i386-dis.c (get_vex_imm8): Do not increment codep.
229 Avoid incrementing bytes_before_imm when OP_E_memory
230 has already forwarded the codep pointer.
231 (OP_EX_VexW): Increment codep to skip mod/rm byte.
232
233 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
234
235 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
236 (VEX_LEN_XOP_08_A1): Removed.
237 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
238 VEX_LEN_XOP_08_A1.
239 (vex_len_table): Same.
240 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
241 (cpu_flags): Remove field for CpuCVT16.
242 * i386-opc.h (CpuCVT16): Removed.
243 (i386_cpu_flags): Remove bitfield cpucvt16.
244 (i386-opc.tbl): Remove CVT16 instructions.
245 * i386-init.h: Regenerated.
246 * i386-tbl.h: Regenerated.
247
248 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
249 Quentin Neill <quentin.neill@amd.com>
250
251 * i386-dis.c (OP_Vex_2src_1): New.
252 (OP_Vex_2src_2): New.
253 (Vex_2src_1): New.
254 (Vex_2src_2): New.
255 (XOP_08): Added.
256 (VEX_LEN_XOP_08_A0): Added.
257 (VEX_LEN_XOP_08_A1): Added.
258 (VEX_LEN_XOP_09_80): Added.
259 (VEX_LEN_XOP_09_81): Added.
260 (xop_table): Added an entry for XOP_08. Handle xop instructions.
261 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
262 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
263 (get_valid_dis386): Handle XOP_08.
264 (OP_Vex_2src): New.
265 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
266 (cpu_flags): Add CpuXOP and CpuCVT16.
267 (opcode_modifiers): Add XOP08, Vex2Sources.
268 * i386-opc.h (CpuXOP): Added.
269 (CpuCVT16): Added.
270 (i386_cpu_flags): Add cpuxop and cpucvt16.
271 (XOP08): Added.
272 (Vex2Sources): Added.
273 (i386_opcode_modifier): Add xop08, vex2sources.
274 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
275 * i386-init.h: Regenerated.
276 * i386-tbl.h: Regenerated.
277
278 2009-11-17 Nick Clifton <nickc@redhat.com>
279
280 PR binutils/10924
281 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
282 instruction variants. Add pattern for MRS variant that was being
283 confused with CMP.
284 (arm_decode_shift): Place error message in a comment.
285 (print_insn_arm): Note that writing back to the PC is
286 unpredictable.
287 Only print 'p' variants of cmp/cmn/teq/tst instructions if
288 decoding for pre-V6 architectures.
289
290 2009-11-17 Edward Nevill <edward.nevill@arm.com>
291
292 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
293
294 2009-11-14 Doug Evans <dje@sebabeach.org>
295
296 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
297 ../cgen/cpu.
298 * Makefile.in: Regenerate.
299
300 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
301
302 * i386-dis.c (OP_E_extended): Removed.
303
304 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
305
306 * i386-dis.c (print_insn): Check rex_ignored.
307
308 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
309
310 * i386-dis.c (ckprefix): Updated to return 0 if number of
311 prefixes > 14 and record the last position for each prefix.
312 (lock_prefix): Removed.
313 (data_prefix): Likewise.
314 (addr_prefix): Likewise.
315 (repz_prefix): Likewise.
316 (repnz_prefix): Likewise.
317 (last_lock_prefix): New.
318 (last_repz_prefix): Likewise.
319 (last_repnz_prefix): Likewise.
320 (last_data_prefix): Likewise.
321 (last_addr_prefix): Likewise.
322 (last_rex_prefix): Likewise.
323 (last_seg_prefix): Likewise.
324 (MAX_CODE_LENGTH): Likewise.
325 (ADDR16_PREFIX): Likewise.
326 (ADDR32_PREFIX): Likewise.
327 (DATA16_PREFIX): Likewise.
328 (DATA32_PREFIX): Likewise.
329 (REP_PREFIX): Likewise.
330 (seg_prefix): Likewise.
331 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
332 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
333 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
334 (get_valid_dis386): Updated.
335 (OP_C): Likewise.
336 (OP_Monitor): Likewise.
337 (REP_Fixup): Likewise.
338 (print_insn): Display all prefixes.
339 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
340 (intel_operand_size): Likewise.
341 (OP_E_register): Likewise.
342 (OP_G): Likewise.
343 (OP_REG): Likewise.
344 (OP_IMREG): Likewise.
345 (OP_I): Likewise.
346 (OP_I64): Likewise.
347 (OP_sI): Likewise.
348 (CRC32_Fixup): Likewise.
349 (MOVBE_Fixup): Likewise.
350 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
351 in 16bit mode.
352 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
353 used_prefixes only if it is used.
354
355 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
356
357 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
358 or, sbb, sub, xor and xchg with register only operands.
359 * i386-tbl.h: Regenerated.
360
361 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
362
363 * i386-gen.c (opcode_modifiers): Add IsLockable.
364
365 * i386-opc.h (IsLockable): New.
366 (i386_opcode_modifier): Add islockable.
367
368 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
369 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
370 xor, xadd and xchg.
371 * i386-tbl.h: Regenerated.
372
373 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
374
375 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
376 generic coprocessor instructions for FPA loads and stores.
377 (print_insn_coprocessor): Remove %C support. Display address for
378 PC-relative offsets in %A.
379
380 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
381
382 * i386-dis.c (all_prefixes): New.
383 (ckprefix): Set all_prefixes.
384 (print_insn): Print all_prefixes instead of lock_prefix,
385 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
386
387 2009-11-11 Nick Clifton <nickc@redhat.com>
388
389 PR binutils/10924
390 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
391 (print_insn_arm): Extend %s format control code to check for
392 unpredictable addressing modes. Add support for %S format control
393 code which suppresses this check.
394 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
395 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
396 PRE_BIT_SET): New macros.
397 (print_insn_coprocessor): Use the new macros instead of magic
398 constants.
399 (print_arm_address): Likewise.
400 (pirnt_insn_arm): Likewise.
401 (print_insn_thumb32): Likewise.
402
403 2009-11-11 Nick Clifton <nickc@redhat.com>
404
405 * po/id.po: Updated Indonesian translation.
406
407 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
408
409 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
410
411 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
412
413 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
414 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
415 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
416 the xop_table.
417 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
418 XOP instructions.
419
420 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
421 Quentin Neill <quentin.neill@amd.com>
422
423 * opcodes/i386-dis.c (OP_LWPCB_E): New.
424 (OP_LWP_E): New.
425 (OP_LWP_I): New.
426 (USE_XOP_8F_TABLE): New.
427 (XOP_8F_TABLE): New.
428 (REG_XOP_LWPCB): New.
429 (REG_XOP_LWP): New.
430 (XOP_09): New.
431 (XOP_0A): New.
432 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
433 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
434 (xop_table): New.
435 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
436 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
437 to access to the vex_table.
438 (OP_LWPCB_E): New.
439 (OP_LWP_E): New.
440 (OP_LWP_I): New.
441 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
442 (cpu_flags): Add CpuLWP.
443 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
444 * opcodes/i386-opc.h (CpuLWP): New.
445 (i386_cpu_flags): Add bit cpulwp.
446 (VexLWP): New.
447 (XOP09): New.
448 (XOP0A): New.
449 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
450 * opcodes/i386-opc.tbl (llwpcb): Added.
451 (lwpval): Added.
452 (lwpins): Added.
453
454 2009-11-04 DJ Delorie <dj@redhat.com>
455
456 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
457 (mvtcp, mvfcp, opecp): Remove.
458 * rx-decode.c: Regenerate.
459 * rx-dis.c (cpen): Remove.
460
461 2009-11-03 Doug Evans <dje@sebabeach.org>
462
463 * m32c-desc.c: Regenerate.
464 * mep-desc.c: Regenerate.
465
466 2009-11-02 Paul Brook <paul@codesourcery.com>
467
468 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
469 Add VFPv4 instructions.
470
471 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
472
473 * i386-dis.c (OP_VEX_FMA): Removed.
474 (VexFMA): Removed.
475 (Vex128FMA): Removed.
476 (prefix_table): First source operand of FMA4 insns is decoded
477 with Vex not with VexFMA.
478 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
479 when vex.w is set. Third source operand is decoded with
480
481 2009-10-27 Alan Modra <amodra@bigpond.net.au>
482
483 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
484 * Makefile.in: Regenerate.
485 * po/POTFILES.in: Regenerate.
486
487 2009-10-23 Doug Evans <dje@sebabeach.org>
488
489 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
490 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
491 * cgen-bitset.c: Update.
492 * fr30-desc.h: Regenerate.
493 * frv-desc.h: Regenerate.
494 * ip2k-desc.h: Regenerate.
495 * iq2000-desc.h: Regenerate.
496 * lm32-desc.h: Regenerate.
497 * m32c-desc.h: Regenerate.
498 * m32c-opc.h: Regenerate.
499 * m32r-desc.h: Regenerate.
500 * mep-desc.h: Regenerate.
501 * mt-desc.h: Regenerate.
502 * openrisc-desc.h: Regenerate.
503 * xc16x-desc.h: Regenerate.
504 * xstormy16-desc.h: Regenerate.
505
506 2009-10-22 DJ Delorie <dj@redhat.com>
507
508 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
509 * rx-decode.c: Regenerated.
510
511 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
512
513 PR gas/10775
514 * i386-dis.c: Document LB, LS and LV macros.
515 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
516 with the 64-bit displacement or immediate operand.
517 (putop): Handle LB, LS and LV macros.
518
519 2009-10-18 Doug Evans <dje@sebabeach.org>
520
521 * lm32-opinst.c: Regenerate.
522 * m32c-desc.c: Regenerate.
523 * m32r-opinst.c: Regenerate.
524 * openrisc-ibld.c: Regenerate.
525 * xc16x-desc.c: Regenerate.
526 * xc16x-desc.h: Regenerate.
527
528 2009-10-17 Doug Evans <dje@sebabeach.org>
529
530 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
531 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
532 sorted alphabetically.
533 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
534 stamp-* rules are sorted alphabetically.
535 * Makefile.in: Regenerate.
536
537 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
538
539 * i386-opc.h: Use enum instead of nested macros.
540
541 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
542
543 * i386-dis.c: Simplify enums.
544
545 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
546 Ineiev <ineiev@gmail.com>
547
548 PR binutils/10767
549 * i386-dis.c: Use enum instead of nested macros.
550
551 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
552
553 * i386-dis.c (MAX_BYTEMODE): Removed.
554
555 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
556
557 PR 969
558 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
559
560 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
561
562 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
563 and vex_w_done.
564
565 2009-10-07 Michael Eager <eager@eagercon.com>
566
567 * microblaze-dis.c: Add include for microblaze-dis.h,
568 eliminate local extern decls.
569 * microblaze-dis.h: New.
570
571 2009-10-06 Nick Clifton <nickc@redhat.com>
572
573 * po/fi.po: Updated Finnish translation.
574
575 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
576
577 * opc2c.c: Include "libiberty.h" and <errno.h>.
578 (orig_filename): Constify.
579 (dump_lines): Fix line number directive.
580 (main): Set orig_filename to basename of input file. Use
581 xstrerror.
582
583 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
584 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
585 instead of $(EXEEXT).
586 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
587 $(LINK_FOR_BUILD). Link with libiberty.
588 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
589 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
590 * Makefile.in: Regenerated.
591 * rx-decode.c: Regenerated.
592
593 2009-10-03 Paul Reed <paulreed@paddedcell.com>
594
595 * arm-dis.c (print_insn): Check symtab_size not *symtab.
596
597 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
598
599 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
600 * i386-tbl.h: Regenerated.
601
602 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
603
604 * ppc-dis.c (ppc_opts): Add "476" entry.
605 * ppc-opc.c (PPC476): Define.
606 (powerpc_opcodes): Update mnemonics where required for 476.
607
608 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
609
610 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
611 * ppc-dis.c (ppc_opts): Likewise.
612 Rename "ppca2" to "a2".
613
614 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
615
616 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
617
618 2009-09-29 DJ Delorie <dj@redhat.com>
619
620 * Makefile.am: Add RX files.
621 * configure.in: Add support for RX target.
622 * disassemble.c: Likewise.
623 * Makefile.in: Regenerate.
624 * configure: Regenerate.
625 * opc2c.c: New file.
626 * rx-decode.c: New file.
627 * rx-decode.opc: New file.
628 * rx-dis.c: New file.
629
630 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
631
632 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
633 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
634
635 2009-09-25 Michael Eager <eager@eagercon.com>
636
637 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
638 microblaze_decode_insn): Add declarations.
639 (get_delay_slots_microblaze): Remove.
640
641 2009-09-25 Martin Thuresson <martint@google.com>
642
643 Update sources to make arc and arm targets compile cleanly with
644 -Wc++-compat:
645 * arc-dis.c Fix casts.
646 * arc-ext.c: Add casts.
647 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
648 enum.
649
650 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
651
652 * i386-gen.c (opcode_modifiers): Remove Vex256.
653 (set_bitfield): Handle XXX=V.
654
655 * i386-opc.h (Vex): Update comments.
656 (Vex256): Removed.
657 (VexNDS): Updated.
658 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
659
660 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
661 * i386-tbl.h: Regenerated.
662
663 2009-09-23 Nick Clifton <nickc@redhat.com>
664
665 * po/fr.po: Updated French translation.
666
667 2009-09-21 Ben Elliston <bje@au.ibm.com>
668 Peter Bergner <bergner@vnet.ibm.com>
669
670 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
671 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
672 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
673 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
674 ici mnemonics.
675 (ERAT_T): New operand.
676 (XWC_MASK): New mask.
677 (XOPL2): New macro.
678 (PPCA2): Define.
679
680 2009-09-18 Nick Clifton <nickc@redhat.com>
681
682 * po/es.po: Updated Spanish translation.
683 * po/vi.po: Updated Vietnamese translation.
684
685 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
686
687 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
688 disp == -disp.
689
690 2009-09-14 Nick Clifton <nickc@redhat.com>
691
692 * po/nl.po: Updated Dutch translation.
693
694 2009-09-11 Nick Clifton <nickc@redhat.com>
695
696 * po/opcodes.pot: Updated by the Translation project.
697
698 2009-09-11 Martin Thuresson <martint@google.com>
699
700 Updated sources to compile cleanly with -Wc++-compat:
701 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
702 * ldcref.c: Add casts.
703 * ldctor.c: Add casts.
704 * ldexp.c
705 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
706 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
707 * ldlang.h (enum statement_enum): Move to top level.
708 * ldmain.c: Add casts.
709 * ldwrite.c: Add casts.
710 * lexsup.c: Add casts. (enum control_enum): Move to top level.
711 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
712
713 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
714
715 * s390-dis.c (print_insn_s390): Avoid 'long long'.
716
717 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
718
719 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
720 (print_insn_s390): Signextend and shift pcrel operands before printing.
721
722 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
723
724 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
725 VEX_LEN_AE_R_X_M_0 in comments.
726
727 2009-09-08 DJ Delorie <dj@redhat.com>
728
729 * mep-opc.c: Regenerate.
730
731 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
732
733 * z8kgen.c (struct op): Replace unused flavor with id.
734 (opt): Remove extra xorb entry.
735 (func): Use id field as fallback.
736 (sub): Return new string, caller changed.
737 (internal): Allocate end marker. Assign unique id before sorting.
738 (gas): Likewise. Fix loop end condition.
739 * z8k-opc.h: Regenerate.
740
741 2009-09-08 Alan Modra <amodra@bigpond.net.au>
742
743 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
744
745 2009-09-07 Alan Modra <amodra@bigpond.net.au>
746
747 * z8kgen.c (func): Fix thinko last patch.
748
749 2009-09-07 Alan Modra <amodra@bigpond.net.au>
750
751 * z8kgen.c (func): Stabilize qsort of identically named entries.
752 * z8k-opc.h: Regenerate.
753
754 2009-09-07 Tristan Gingold <gingold@adacore.com>
755
756 * po/opcodes.pot: Regenerate.
757
758 2009-09-07 Alan Modra <amodra@bigpond.net.au>
759
760 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
761 * configure: Regenerate.
762 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
763 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
764 (i386-gen, ia64-gen, z8kgen): ..here.
765 * Makefile.in: Regenerate.
766
767 2009-09-07 Tristan Gingold <gingold@adacore.com>
768
769 * z8k-opc.h: Regenerate.
770
771 2009-09-05 Martin Thuresson <martin@mtme.org>
772
773 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
774 * m88k-dis.c (m88kdis): Rename variable class to in_class.
775 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
776 Rename argument class to symbol_class.
777
778 2009-09-04 Jie Zhang <jie.zhang@analog.com>
779
780 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
781 to the new encoding of DBGA, DBGAH, and DBGAL.
782 (_print_insn_bfin): Likewise.
783
784 2009-09-03 Jie Zhang <jie.zhang@analog.com>
785
786 * bfin-dis.c (_print_insn_bfin): Don't declare.
787 (print_insn_bfin): Don't declare.
788 (dregs_pair): Remove.
789 (ignore_bits): Remove.
790 (ccstat): Remove.
791
792 2009-09-03 Jie Zhang <jie.zhang@analog.com>
793
794 * bfin-dis.c (IS_DREG): Define.
795 (IS_PREG): Define.
796 (IS_AREG): Define.
797 (IS_GENREG): Define.
798 (IS_DAGREG): Define.
799 (IS_SYSREG): Define.
800 (decode_REGMV_0): Check illegal register move instructions.
801
802 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
803
804 * Makefile.am (BUILD_LIBINTL): New variable.
805 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
806 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
807 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
808 * Makefile.in: Regenerate.
809
810 2009-09-01 DJ Delorie <dj@redhat.com>
811
812 * mep-asm.c: Regenerate.
813 * mep-desc.c: Regenerate.
814 * mep-opc.c: Regenerate.
815
816 2009-09-01 Tristan Gingold <gingold@adacore.com>
817
818 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
819 dependencies. Remove unused FORMAT variable.
820 * configure.com: New file to create build.com DCL script for
821 Itanium VMS or Alpha VMS.
822
823 2009-08-29 Martin Thuresson <martin@mtme.org>
824
825 * cris-dis.c (bytes_to_skip): Update code to use new name.
826 * i386-dis.c (putop): Update code to use new name.
827 * i386-gen.c (process_i386_opcodes): Update code to use
828 new name.
829 * i386-opc.h (struct template): Rename struct template to
830 insn_template. Update code accordingly.
831 * i386-tbl.h (i386_optab): Update type to use new name.
832 * ia64-dis.c (print_insn_ia64): Rename variable template
833 to template_val.
834 * tic30-dis.c (struct instruction, get_tic30_instruction):
835 Update code to use new name.
836 * tic54x-dis.c (has_lkaddr, get_insn_size)
837 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
838 Update code to use new name.
839 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
840 Update type to new name.
841 * z8kgen.c (internal, gas): Rename variable new to new_op.
842
843 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
844
845 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
846 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
847 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
848 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
849 * Makefile.in: Regenerated.
850
851 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
852
853 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
854 [INSTALL_LIBBFD]: ... here, ...
855 [INSTALL_LIBBFD]: ... and empty overrides here.
856 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
857 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
858 * Makefile.in: Regenerate.
859 * configure: Regenerate.
860
861 2009-08-26 Philippe De Muyter <phdm@macqel.be>
862
863 * m68k-dis.c (print_insn_arg): Add movecr register names for
864 coldfire v4e families.
865
866 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
867
868 * Makefile.am (SUBDIRS): Build '.' before 'po'.
869 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
870 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
871 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
872 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
873 (i386-gen.o): New rule.
874 ($(srcdir)/i386-init.h): Adjust.
875 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
876 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
877 (ia64-gen.o): New rule.
878 (ia64_asmtab_deps): New variable.
879 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
880 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
881 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
882 likewise.
883 (s390-opc.tab): Adjust.
884 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
885 rules.
886 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
887 * Makefile.in: Regenerate.
888 * z8kgen.c (gas): Avoid '/*' in comment.
889 * z8k-opc.h (func): Regenerate.
890
891 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
892
893 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
894 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
895 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
896 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
897 msp430-dis.c added.
898 (LIBOPCODES_CFILES): New variable, adding to
899 TARGET_LIBOPCODES_CFILES also non-target library sources.
900 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
901 files.
902 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
903 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
904 * Makefile.in: Regenerate.
905 * po/POTFILES.in: Regenerate.
906
907 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
908
909 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
910 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
911 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
912 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
913 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
914 is built shared even if it is not to be installed.
915 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
916 (install_libopcodes, uninstall_libopcodes): Remove.
917 (AM_CPPFLAGS): Renamed from ...
918 (INCLUDES): ... this.
919 * Makefile.in: Regenerate.
920
921 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
922 1.11, foreign, no-dist.
923 (MKDEP, m32c_opc_h): Remove variables.
924 (disassemble.lo): Rewrite using automake-style dependency
925 tracking rules; only list the dependency upon the primary source
926 file, but no included headers.
927 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
928 (i386-gen.o, ia64-gen.o): Remove dependency statements.
929 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
930 ensure all dependency fragments are included in the Makefile.
931 (s390-opc.lo): Depend on s390-opc.tab.
932 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
933 (mkdep section): Remove.
934 * Makefile.in: Regenerate.
935 * po/POTFILES.in: Regenerate.
936
937 * Makefile.am (install-pdf, install-html): Remove.
938 * Makefile.in: Regenerate.
939
940 * Makefile.in: Regenerate.
941 * aclocal.m4: Likewise.
942 * config.in: Likewise.
943 * configure: Likewise.
944
945 2009-08-06 Michael Eager <eager@eagercon.com>
946
947 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
948 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
949 * Makefile.in: Regenerate.
950 * configure.in: Add bfd_microblaze_arch target.
951 * configure: Regenerate.
952 * disassemble.c: Define ARCH_microblaze, return
953 print_insn_microblaze().
954 * microblaze-dis.c: New MicroBlaze disassembler.
955 * microblaze-opc.h: New MicroBlaze opcode definitions.
956 * microblaze-opcm.h: New MicroBlaze opcode types.
957
958 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
959
960 * configure.in: Handle bfd_l1om_arch.
961 * disassemble.c (disassembler): Likewise.
962
963 * configure: Regenerated.
964
965 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
966 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
967
968 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
969 Add CPU_L1OM_FLAGS.
970 (cpu_flags): Add CpuL1OM.
971 (set_bitfield): Take an argument to set the value field.
972 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
973 (process_i386_opcode_modifier): Updated.
974 (process_i386_operand_type): Likewise.
975 * i386-init.h: Regenerated.
976 * i386-tbl.h: Likewise.
977
978 * i386-opc.h (CpuL1OM): New.
979 (CpuXsave): Updated.
980 (i386_cpu_flags): Add cpul1om.
981
982 2009-07-24 Jan Beulich <jbeulich@novell.com>
983
984 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
985 frstpm.
986 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
987 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
988 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
989 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
990 Define.
991 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
992 and cpufisttp.
993 * i386-opc.tbl: Qualify floating point instructions by their
994 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
995 and fsincos to be avilable only on 387. Fix fstsw ax to be
996 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
997 and frstpm.
998 * i386-init.h, i386-tbl.h: Regenerate.
999
1000 2009-07-20 Nick Clifton <nickc@redhat.com>
1001
1002 PR 10288
1003 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
1004 offset or indexed based addressing mode 3.
1005
1006 2009-07-14 Nick Clifton <nickc@redhat.com>
1007
1008 PR 10288
1009 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
1010 patterns.
1011 (arm_decode_shift): Catch illegal register based shifts.
1012 (print_insn_arm): Properly handle negative register r0
1013 post-indexed addressing.
1014
1015 2009-07-10 Doug Kwan <dougkwan@google.com>
1016
1017 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
1018 lower 32 bits of long types to make hexadecimal output consistent
1019 on both 32-bit and 64-bit hosts.
1020
1021 2009-07-10 Alan Modra <amodra@bigpond.net.au>
1022
1023 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
1024 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
1025 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
1026 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
1027 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
1028 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
1029 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
1030 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
1031 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
1032 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
1033 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
1034 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
1035
1036 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
1037
1038 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
1039
1040 2009-07-07 Nick Clifton <nickc@redhat.com>
1041
1042 PR 10288
1043 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
1044 addressing modes.
1045
1046 2009-07-06 DJ Delorie <dj@redhat.com>
1047
1048 * mep-desc.c: Regenerate.
1049 * mep-desc.h: Regenerate.
1050 * mep-opc.c: Regenerate.
1051 * mep-opc.h: Regenerate.
1052
1053 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1054
1055 * i386-opc.h (CpuFMA4): Add CpuFMA4.
1056 (i386_cpu_flags): New.
1057 * i386-gen.c: Add CPU_FMA4_FLAGS.
1058 * i386-opc.tbl: Add FMA4 instructions.
1059 * i386-tbl.h: Regenerate.
1060 * i386-init.h: Regenerate.
1061 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
1062 (OP_XMM_VexW): Ditto.
1063 (OP_EX_VexW): Ditto.
1064 (VEXI4_Fixup): Ditto.
1065 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
1066 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
1067 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
1068 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
1069 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
1070 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
1071 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
1072 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
1073 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
1074 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
1075 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
1076 (get_vex_imm8): New. handle FMA4.
1077 (OP_EX_VexReg): Ditto.
1078
1079 2009-06-30 Nick Clifton <nickc@redhat.com>
1080
1081 PR 10288
1082 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
1083 LFM and SFM instructions as comments,.
1084 Improve consistency of formatting for instructions displayed as
1085 comments and decimal values displayed with their hexadecimal
1086 equivalents.
1087 Formatting tidy ups.
1088
1089 2009-06-29 Nick Clifton <nickc@redhat.com>
1090
1091 PR 10288
1092 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
1093 boundary between variaant and generic coprocessor instuctions.
1094 (coprocessor): Use it.
1095 Fix architecture version of MCRR and MRRC instructions.
1096 (arm_opcdes): Fix patterns for STRB and STRH instructions.
1097 (print_insn_coprocessor): Check architecture and extension masks.
1098 Print a hexadecimal version of any decimal constant that is
1099 outside of the range of -16 to +32.
1100 (print_arm_address): Add a return value of the offset used in the
1101 adress, if it is worth printing a hexadecimal version of it.
1102 (print_insn_neon): Print a hexadecimal version of any decimal
1103 constant that is outside of the range of -16 to +32.
1104 (print_insn_arm): Likewise.
1105 (print_insn_thumb16): Likewise.
1106 (print_insn_thumb32): Likewise.
1107
1108 PR 10297
1109 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
1110 of an undefined instruction.
1111 (arm_opcodes): Use it.
1112 (thumb_opcod): Use it.
1113 (thumb32_opc): Use it.
1114
1115 2009-06-23 DJ Delorie <dj@redhat.com>
1116
1117 * mep-desc.c: Regenerate.
1118 * mep-desc.h: Regenerate.
1119 * mep-dis.c: Regenerate.
1120 * mep-ibld.c: Regenerate.
1121 * mep-opc.c: Regenerate.
1122
1123 * mep-asm.c: Regenerate.
1124 * mep-opc.c: Regenerate.
1125 * mep-opc.h: Regenerate.
1126
1127 2009-06-22 Nick Clifton <nickc@redhat.com>
1128
1129 * po/fi.po: Updated Finish translation.
1130
1131 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1132
1133 * m32c-asm.c: Regenerate.
1134
1135 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1136
1137 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1138 case label to proper lexical block.
1139 * score7-dis.c (print_insn_score32): Likewise.
1140
1141 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1142
1143 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1144 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1145 * s390-opc.txt (nopr, nop): Use new instruction format.
1146
1147 2009-06-18 Nick Clifton <nickc@redhat.com>
1148
1149 PR 10288
1150 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1151 ARM architecture supports the matched instruction.
1152 (print_insn_arm): Likewise.
1153 (select_arm_features): New function. Fills in the fields of an
1154 arm_feature_set structure based on a given arm machine number.
1155 (print_insn): Initialise an arm_feature_set structure.
1156
1157 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1158
1159 * vax-dis.c (is_function_entry): Return success for synthetic
1160 symbols too.
1161 (is_plt_tail): New function.
1162 (print_insn_vax): Decode PLT entry offset longword.
1163
1164 2009-06-15 Nick Clifton <nickc@redhat.com>
1165
1166 PR 10186
1167 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1168 instruction.
1169
1170 PR 10173
1171 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1172
1173 2009-06-15 Nick Clifton <nickc@redhat.com>
1174
1175 PR 10263
1176 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1177 the disassembly of data as well as instructions.
1178
1179 2009-06-11 Doug Evans <dje@sebabeach.org>
1180
1181 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1182
1183 2009-06-11 Anthony Green <green@moxielogic.com>
1184
1185 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1186 (moxie_form3_opc_info): Add branch instructions.
1187 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1188 encoded instructions.
1189
1190 2009-06-06 Anthony Green <green@moxielogic.com>
1191
1192 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1193 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1194
1195 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1196
1197 * dep-in.sed: Don't use \n in replacement part of s command.
1198 * Makefile.am (DEP1): LC_ALL for uniq.
1199 * Makefile.in: Regenerate.
1200
1201 2009-06-02 Nick Clifton <nickc@redhat.com>
1202
1203 * po/nl.po: Updated Dutch translation.
1204
1205 2009-06-02 Tristan Gingold <gingold@adacore.com>
1206
1207 * ia64-gen.c (parse_resource_users, print_dependency_table,
1208 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1209 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1210 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1211 insert_completer_entry, print_completer_entry, print_completer_table,
1212 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1213
1214 2009-05-28 DJ Delorie <dj@redhat.com>
1215
1216 * mep-asm.c: Regenerate.
1217 * mep-desc.c: Regenerate.
1218
1219 2009-05-26 DJ Delorie <dj@redhat.com>
1220
1221 * mep-asm.c: Regenerate.
1222 * mep-desc.c: Regenerate.
1223 * mep-desc.h: Regenerate.
1224 * mep-dis.c: Regenerate.
1225 * mep-ibld.c: Regenerate.
1226 * mep-opc.c: Regenerate.
1227 * mep-opc.h: Regenerate.
1228
1229 2009-05-26 Nick Clifton <nickc@redhat.com>
1230
1231 * po/id.po: Updated Indonesian translation.
1232 * po/opcodes.pot: Updated template file.
1233
1234 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1235
1236 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1237 per line with all lines having continuation backslash. Prefix
1238 first line with "A", following lines with "B".
1239 * Makefile.am (DEP): Don't use dep.sed here.
1240 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1241 dep.sed here on dependencies, sort and uniq.
1242 * Makefile.in: Regenerate.
1243
1244 2009-05-25 Tristan Gingold <gingold@adacore.com>
1245
1246 * makefile.vms (OPT): New variable.
1247 (CFLAGS): Update compilation flags.
1248
1249 2009-05-22 DJ Delorie <dj@redhat.com>
1250
1251 * mep-asm.c: Regenerate.
1252 * mep-desc.c: Regenerate.
1253 * mep-desc.h: Regenerate.
1254 * mep-dis.c: Regenerate.
1255 * mep-ibld.c: Regenerate.
1256 * mep-opc.c: Regenerate.
1257 * mep-opc.h: Regenerate.
1258
1259 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1260
1261 * i386-opc.h (Cpusse5): Delete.
1262 (i386_cpu_flags): Delete.
1263 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1264 * i386-opc.tbl: Remove SSE5 instructions.
1265 * i386-tbl.h: Regenerate.
1266 * i386-init.h: Regenerate.
1267 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1268 (print_drex_arg): Delete.
1269 (OP_DREX4): Delete.
1270 (OP_DREX3): Delete.
1271 (OP_DREX_ICMP): Delete.
1272 (OP_DREX_FCMP): Delete.
1273 (DREX_*): Delete.
1274 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1275
1276 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1277
1278 * Makefile.am: Run "make dep-am".
1279 * Makefile.in: Regenerate.
1280 * po/POTFILES.in: Regenerate.
1281
1282 2009-05-19 DJ Delorie <dj@redhat.com>
1283
1284 * mep-asm.c: Regenerate.
1285 * mep-opc.c: Regenerate.
1286
1287 2009-04-30 DJ Delorie <dj@redhat.com>
1288
1289 * mep-asm.c: Regenerate.
1290 * mep-desc.c: Regenerate.
1291 * mep-desc.h: Regenerate.
1292 * mep-dis.c: Regenerate.
1293 * mep-ibld.c: Regenerate.
1294 * mep-opc.c: Regenerate.
1295 * mep-opc.h: Regenerate.
1296
1297 2009-04-17 DJ Delorie <dj@redhat.com
1298
1299 * mep-desc.c: Regenerate.
1300 * mep-ibld.c: Regenerate.
1301 * mep-opc.c: Regenerate.
1302 * mep-opc.h: Regenerate.
1303
1304 2009-04-15 Anthony Green <green@moxielogic.com>
1305
1306 * moxie-opc.c, moxie-dis.c: Created.
1307 * Makefile.am: Build the moxie source files.
1308 * configure.in: Add moxie support.
1309 * Makefile.in, configure: Rebuilt.
1310 * disassemble.c (disassembler): Add moxie support.
1311 (ARCH_moxie): Define.
1312
1313 2009-04-15 Jan Beulich <jbeulich@novell.com>
1314
1315 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1316 extension to None.
1317 (pshab, pshaw, pshad, pshaq): Likewise.
1318 * i386-tbl.h: Re-generate.
1319
1320 2009-04-08 DJ Delorie <dj@redhat.com
1321
1322 * mep-asm.c: Regenerate.
1323 * mep-desc.c: Regenerate.
1324 * mep-desc.h: Regenerate.
1325 * mep-dis.c: Regenerate.
1326 * mep-ibld.c: Regenerate.
1327 * mep-opc.c: Regenerate.
1328 * mep-opc.h: Regenerate.
1329
1330 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1331
1332 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1333 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1334 Reorder entries so the extended mnemonics are listed before tlbilx.
1335
1336 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1337
1338 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1339 due to -many/-Many.
1340 (print_insn_powerpc): Make sure we only deprecate instructions using
1341 the original dialect and not a modified dialect due to -Many handling.
1342 Move the handling of the condition register and default operands to
1343 the end of the if/else if/else chain.
1344 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1345 instructions from newer processors are listed before older ones.
1346 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1347 that have instructions with conflicting opcodes.
1348
1349 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1350
1351 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1352 E500MC entries.
1353
1354 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1355
1356 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1357
1358 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1359
1360 * arm-dis.c (print_insn): Also check section matches in backwards
1361 search for mapping symbol.
1362
1363 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1364
1365 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1366
1367 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1368
1369 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1370 * Makefile.am: Run "make dep-am".
1371 * Makefile.in: Regenerate.
1372 * openrisc-opc.c: Regenerate.
1373
1374 2009-03-10 Nick Clifton <nickc@redhat.com>
1375
1376 * po/id.po: Updated Indonesian translation.
1377
1378 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1379
1380 * ppc-dis.c: Include "opintl.h".
1381 (struct ppc_mopt, ppc_opts): New.
1382 (ppc_parse_cpu): New function.
1383 (powerpc_init_dialect): Use it.
1384 (print_ppc_disassembler_options): Dump options from ppc_opts.
1385 Internationalize message.
1386
1387 2009-03-06 Nick Clifton <nickc@redhat.com>
1388
1389 * po/es.po: Updated Spanish translation.
1390
1391 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1392
1393 PR 6768
1394 * configure.in: Test for ld --as-needed support. Link shared
1395 libopcodes against libm.
1396 * configure: Regenerate.
1397
1398 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1399
1400 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1401 instructions from newer processors are listed before older ones.
1402
1403 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1404
1405 * Makefile.am: Run "make dep-am".
1406 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1407 (CFILES): ..here.
1408 * Makefile.in: Regenerate.
1409
1410 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1411
1412 * score7-dis.c: New file.
1413 * Makefile.am: Add dependencies for score7-dis.c.
1414 * Makefile.in: Regenerate.
1415 * configure.in: Add score7-dis to score files.
1416 * configure: Regenerate.
1417 * score-dis.c: Add support for score7 architecture.
1418 * score-opc.h: Likewise.
1419
1420 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1421
1422 * configure: Regenerate.
1423
1424 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1425
1426 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1427
1428 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1429
1430 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1431 the power7 and the isel instructions.
1432 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1433 (insert_dm, extract_dm): Likewise.
1434 (XB6): Update comment to include XX2 form.
1435 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1436 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1437 (RemoveXX3DM): Delete.
1438 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1439 "mftgpr">: Deprecate for POWER7.
1440 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1441 "frsqrte.">: Deprecate the three operand form and enable the two
1442 operand form for POWER7 and later.
1443 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1444 <"waitsrv", "waitimpl">: Add extended opcodes.
1445 <"ldbrx", "stdbrx">: Enable for POWER7.
1446 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1447 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1448 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1449 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1450 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1451 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1452 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1453 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1454 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1455 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1456 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1457 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1458 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1459 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1460 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1461 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1462 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1463 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1464 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1465 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1466 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1467 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1468 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1469 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1470 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1471 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1472 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1473 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1474 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1475 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1476 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1477 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1478 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1479 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1480 "xxspltw", "xxswapd">: Add VSX opcodes.
1481
1482 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1483
1484 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1485 (operand_types): Remove Vex_Imm4.
1486
1487 * i386-opc.h (Vex_Imm4): Removed.
1488 (OTMax): Updated.
1489 (i386_operand_type): Remove vex_imm4.
1490
1491 * i386-opc.tbl: Remove Vex_Imm4 comments.
1492 * i386-init.h: Regenerated.
1493 * i386-tbl.h: Likewise.
1494
1495 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1496
1497 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1498 vq{r}shr{u}n.s64 insnstructions.
1499
1500 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1501
1502 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1503 operand to be a float point register (FRT/FRS).
1504
1505 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1506
1507 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1508 dmfc2 and dmtc2 before the architecture-level variants.
1509
1510 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1511
1512 * fr30-opc.c: Regenerate.
1513 * frv-opc.c: Regenerate.
1514 * ip2k-opc.c: Regenerate.
1515 * iq2000-opc.c: Regenerate.
1516 * lm32-opc.c: Regenerate.
1517 * m32c-opc.c: Regenerate.
1518 * m32r-opc.c: Regenerate.
1519 * mep-opc.c: Regenerate.
1520 * mt-opc.c: Regenerate.
1521 * xc16x-opc.c: Regenerate.
1522 * xstormy16-opc.c: Regenerate.
1523 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1524 sprintf call.
1525
1526 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1527
1528 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1529
1530 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1531
1532 * ppc-opc.c: Update copyright year.
1533 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1534 ordering for POWER4 and later and use the correct Server ordering.
1535
1536 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1537
1538 AVX Programming Reference (January, 2009)
1539 * i386-dis.c (PREFIX_VEX_3A44): New.
1540 (VEX_LEN_3A44_P_2): Likewise.
1541 (PREFIX_VEX_3A48): Updated.
1542 (VEX_LEN_3A4C_P_2): Likewise.
1543 (prefix_table): Add PREFIX_VEX_3A44.
1544 (vex_table): Likewise.
1545 (vex_len_table): Add VEX_LEN_3A44_P_2.
1546
1547 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1548 * i386-tbl.h: Regenerated.
1549
1550 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1551
1552 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1553 (mips_arch_choices): Add XLR entry.
1554 * mips-opc.c (XLR): Define.
1555 (mips_builtin_opcodes): Add XLR instructions.
1556
1557 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1558
1559 * Makefile.am: Add install-pdf target.
1560 * po/Make-in: Add install-pdf target.
1561 * Makefile.in: Regenerate.
1562
1563 2009-02-02 DJ Delorie <dj@redhat.com>
1564
1565 * mep-asm.c: Regenerate.
1566 * mep-desc.c: Regenerate.
1567 * mep-desc.h: Regenerate.
1568 * mep-dis.c: Regenerate.
1569 * mep-ibld.c: Regenerate.
1570 * mep-opc.c: Regenerate.
1571 * mep-opc.h: Regenerate.
1572
1573 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1574
1575 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1576 qsub, and qdsub.
1577
1578 2009-01-28 Chao-ying Fu <fu@mips.com>
1579
1580 * mips-opc.c (suxc1): Add the flag of FP_D.
1581
1582 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1583
1584 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1585 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1586 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1587 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1588 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1589 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1590 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1591 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1592
1593 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1594
1595 * configure.in (commonbfdlib): Delete.
1596 (SHARED_LIBADD): Add pic libiberty if such is available.
1597 * configure: Regenerate.
1598 * po/POTFILES.in: Regenerate.
1599
1600 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1601
1602 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1603 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1604 operand form and enable the four operand form for POWER6 and later.
1605 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1606 three operand form for POWER6 and later.
1607
1608 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1609
1610 * bfin-dis.c (OUTS): Use "%s" as format string.
1611
1612 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1613
1614 * i386-gen.c (cpu_flag_init): Remove a white space.
1615 (operand_type_init): Likewise.
1616
1617 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1618
1619 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1620 * i386-tbl.h: Regenerated.
1621
1622 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1623
1624 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1625 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1626 subS, xorS and cmpS.
1627
1628 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1629
1630 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1631 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1632 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1633 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1634 and CpuSYSCALL.
1635 (lineno): Removed.
1636 (set_bitfield): Take an argument, lineno. Don't report lineno
1637 on error if it is -1.
1638 (process_i386_cpu_flag): Take an argument, lineno.
1639 (process_i386_opcode_modifier): Likewise.
1640 (process_i386_operand_type): Likewise.
1641 (output_i386_opcode): Likewise.
1642 (opcode_hash_entry): Add lineno.
1643 (process_i386_opcodes): Updated.
1644 (process_i386_registers): Likewise.
1645 (process_i386_initializers): Likewise.
1646
1647 * i386-opc.h (CpuP4): Removed.
1648 (CpuK6): Likewise.
1649 (CpuK8): Likewise.
1650 (CpuClflush): New.
1651 (CpuSYSCALL): Likewise.
1652 (CpuMMX): Updated.
1653 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1654 cpuclflush and cpusyscall.
1655
1656 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1657 syscall and sysret.
1658 * i386-init.h: Regenerated.
1659 * i386-tbl.h: Likewise.
1660
1661 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1662
1663 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1664 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1665 (cpu_flags): Add CpuRdtscp.
1666 (set_bitfield): Remove CpuSledgehammer check.
1667
1668 * i386-opc.h (CpuRdtscp): New.
1669 (CpuLM): Updated.
1670 (i386_cpu_flags): Add cpurdtscp.
1671
1672 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1673 * i386-init.h: Regenerated.
1674 * i386-tbl.h: Likewise.
1675
1676 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1677
1678 * ppc-opc.c (PPCNONE): Define.
1679 (NOPOWER4): Delete.
1680 (powerpc_opcodes): Initialize the new "deprecated" field.
1681
1682 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1683
1684 AVX Programming Reference (December, 2008)
1685 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1686 (VEX_LEN_E7_P_2_M_0): Likewise.
1687 (VEX_LEN_2C_P_1): Updated.
1688 (VEX_LEN_E8_P_2): Likewise.
1689 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1690 (mod_table): Likewise.
1691
1692 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1693 * i386-tbl.h: Regenerated.
1694
1695 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1696
1697 * i386-gen.c (process_copyright): Update for 2009.
1698
1699 * i386-init.h: Regenerated.
1700 * i386-tbl.h: Likewise.
1701
1702 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1703
1704 AVX Programming Reference (December, 2008)
1705 * i386-dis.c (OP_VEX_FMA): Removed.
1706 (OP_EX_VexW): Likewise.
1707 (OP_EX_VexImmW): Likewise.
1708 (OP_XMM_VexW): Likewise.
1709 (VEXI4_Fixup): Likewise.
1710 (VPERMIL2_Fixup): Likewise.
1711 (VexI4): Likewise.
1712 (VexFMA): Likewise.
1713 (Vex128FMA): Likewise.
1714 (EXVexW): Likewise.
1715 (EXdVexW): Likewise.
1716 (EXqVexW): Likewise.
1717 (EXVexImmW): Likewise.
1718 (XMVexW): Likewise.
1719 (VPERMIL2): Likewise.
1720 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1721 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1722 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1723 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1724 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1725 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1726 (get_vex_imm8): Likewise.
1727 (OP_EX_VexReg): Likewise.
1728 vpermil2_op): Likewise.
1729 (EXVexWdq): New.
1730 (vex_w_dq_mode): Likewise.
1731 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1732 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1733 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1734 (es_reg): Updated.
1735 (PREFIX_VEX_38DB): Likewise.
1736 (PREFIX_VEX_3A4A): Likewise.
1737 (PREFIX_VEX_3A60): Likewise.
1738 (PREFIX_VEX_3ADF): Likewise.
1739 (VEX_LEN_3ADF_P_2): Likewise.
1740 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1741 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1742 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1743 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1744 PREFIX_VEX_3896...PREFIX_VEX_389F,
1745 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1746 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1747 (vex_table): Likewise.
1748 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1749 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1750 (putop): Support "%XW".
1751 (intel_operand_size): Handle vex_w_dq_mode.
1752
1753 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1754
1755 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1756 instructions. Add new FMA instructions.
1757 * i386-tbl.h: Regenerated.
1758
1759 2009-01-02 Matthias Klose <doko@ubuntu.com>
1760
1761 * or32-opc.c (or32_print_register, or32_print_immediate,
1762 disassemble_insn): Don't rely on undefined sprintf behaviour.
1763
1764 For older changes see ChangeLog-2008
1765 \f
1766 Local Variables:
1767 mode: change-log
1768 left-margin: 8
1769 fill-column: 74
1770 version-control: never
1771 End: