sim/bfin/ChangeLog

   1 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure.ac (SIM_AC_COMMON): Delete.
   4         * aclocal.m4, configure: Regenerate.
   5
   6 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * Makefile.in: Change @MAINTAINER_MODE_TRUE@ to $(MAINT).
   9         * aclocal.m4, configure: Regenerate.
  10
  11 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
  12
  13         * aclocal.m4: Regenerate.
  14         * configure: Regenerate.
  15
  16 2021-06-19  Mike Frysinger  <vapier@gentoo.org>
  17
  18         * aclocal.m4: Regenerate.
  19         * configure: Regenerate.
  20
  21 2021-06-19  Mike Frysinger  <vapier@gentoo.org>
  22
  23         * configure: Regenerate.
  24
  25 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * aclocal.m4, configure: Regenerate.
  28
  29 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  30
  31         * configure: Regenerate.
  32
  33 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  34
  35         * dv-bfin_cec.c: Include sim-signal.h.
  36         * sim-main.h: Delete sim-signal.h include.
  37
  38 2021-06-17  Mike Frysinger  <vapier@gentoo.org>
  39
  40         * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
  41         * interp.c (sim_open): Set current_target_byte_order.
  42         * aclocal.m4, configure: Regenerate.
  43
  44 2021-06-16  Mike Frysinger  <vapier@gentoo.org>
  45
  46         * configure: Regenerate.
  47
  48 2021-06-16  Mike Frysinger  <vapier@gentoo.org>
  49
  50         * configure: Regenerate.
  51         * config.in: Removed.
  52
  53 2021-06-15  Mike Frysinger  <vapier@gentoo.org>
  54
  55         * config.in, configure: Regenerate.
  56
  57 2021-06-14  Mike Frysinger  <vapier@gentoo.org>
  58
  59         * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
  60         * configure: Regenerate.
  61
  62 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
  63
  64         * interp.c: Include portability.h.
  65         (getuid, getgid, geteuid, getegid setuid, setgid): Delete.
  66
  67 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
  68
  69         * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
  70         * interp.c (sim_open): Set current_alignment.
  71
  72 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
  73
  74         * aclocal.m4, config.in, configure: Regenerate.
  75
  76 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
  77
  78         * configure.ac: Delete calls to AC_CHECK_FUNCS_ONCE and
  79         AC_CHECK_HEADERS_ONCE.
  80         * config.in, configure: Regenerate.
  81
  82 2021-05-28  Mike Frysinger  <vapier@gentoo.org>
  83
  84         * dv-bfin_otp.c (bfin_otp_write_page): Shift data1 & data3 by 32-bits.
  85
  86 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
  87
  88         * dv-bfin_otp.c (bfin_otp_write_page): Fix args to
  89         bfin_otp_write_page_val2.
  90
  91 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
  92
  93         * dv-bfin_otp.c (bfin_otp_write_page): Call bfin_otp_write_page_val2.
  94
  95 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
  96
  97         * dv-bfin_cec.c: Include strings.h.
  98
  99 2021-05-17  Mike Frysinger  <vapier@gentoo.org>
 100
 101         * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete.
 102
 103 2021-05-17  Mike Frysinger  <vapier@gentoo.org>
 104
 105         * interp.c (sim_open): Call sim_state_alloc_extra.
 106         * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define.
 107         (struct sim_state): Delete.
 108         (STATE_BOARD_DATA): Define.
 109
 110 2021-05-16  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * bfin-sim.c, devices.c, dv-bfin_cec.c, dv-bfin_ctimer.c,
 113         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 114         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 115         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gpio.c, dv-bfin_gpio2.c,
 116         dv-bfin_gptimer.c, dv-bfin_jtag.c, dv-bfin_mmu.c, dv-bfin_nfc.c,
 117         dv-bfin_otp.c, dv-bfin_pfmon.c, dv-bfin_pint.c, dv-bfin_pll.c,
 118         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 119         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 120         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, interp.c,
 121         machs.c: Replace config.h include with defs.h.
 122
 123 2021-05-16  Mike Frysinger  <vapier@gentoo.org>
 124
 125         * config.in, configure: Regenerate.
 126
 127 2021-05-14  Mike Frysinger  <vapier@gentoo.org>
 128
 129         * interp.c: Update include path.
 130
 131 2021-05-04  Mike Frysinger  <vapier@gentoo.org>
 132
 133         * configure: Regenerate.
 134
 135 2021-05-03  Simon Marchi  <simon.marchi@polymtl.ca>
 136
 137         * interp.c (sim_open): Adjust format string specifier.
 138
 139 2021-05-02  Mike Frysinger  <vapier@gentoo.org>
 140
 141         * bfin-sim.c: Include ansidecl.h.
 142         (illegal_instruction): Change __attribute__((noreturn)) to
 143         ATTRIBUTE_NORETURN.
 144         (illegal_instruction_combination, illegal_instruction_or_combination,
 145         unhandled_instruction): Likewise.
 146
 147 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * dv-bfin_mmu.c (bfin_mmu_options): Mark static.
 150         (sim_install_bfin_mmu): New function & prototype.
 151         * interp.c (e_sim_add_option_table): Delete.
 152         * machs.c (bfin_mach_options): Mark static.
 153         (sim_install_bfin_mach): New function & prototype.
 154
 155 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * config.in, configure: Regenerate.
 158
 159 2021-04-26  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * Makefile.in (NL_TARGET): Delete.
 162
 163 2021-04-23  Mike Frysinger  <vapier@gentoo.org>
 164
 165         * configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args.
 166         * configure: Regenerate.
 167
 168 2021-04-22  Tom Tromey  <tom@tromey.com>
 169
 170         * configure, config.in: Rebuild.
 171
 172 2021-04-22  Tom Tromey  <tom@tromey.com>
 173
 174         * Makefile.in (INCLUDE): Remove.
 175
 176 2021-04-22  Tom Tromey  <tom@tromey.com>
 177
 178         * configure: Rebuild.
 179
 180 2021-04-21  Mike Frysinger  <vapier@gentoo.org>
 181
 182         * aclocal.m4: Regenerate.
 183
 184 2021-04-21  Simon Marchi  <simon.marchi@polymtl.ca>
 185
 186         * configure: Regenerate.
 187
 188 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 189
 190         * configure.ac: Change AC_CHECK_HEADERS to AC_CHECK_HEADERS_ONCE.
 191         * configure: Regenerate.
 192
 193 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 194
 195         * configure.ac: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE and
 196         delete mmap & munmap.
 197         * configure: Regenerate.
 198
 199 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 200
 201         * interp.c (bfin_syscall): Delete CB_SYS_getpid handling.
 202
 203 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
 206
 207 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * aclocal.m4, configure: Regenerate.
 210
 211 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 212
 213         * configure: Regenerate.
 214
 215 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
 216
 217         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
 218         * aclocal.m4, configure: Regenerate.
 219
 220 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
 221
 222         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
 223         * aclocal.m4, configure: Regenerate.
 224
 225 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * interp.c (sim_open): Delete call to STATE_WATCHPOINTS.
 228
 229 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * configure: Regenerate.
 232
 233 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
 234
 235         * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
 236
 237 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * config.in, configure: Regenerate.
 240
 241 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
 242
 243         * configure: Regenerate.
 244
 245 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
 246
 247         * configure: Regenerate.
 248
 249 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
 250
 251         * machs.c: Include stdlib.h.
 252
 253 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
 254
 255         * dv-bfin_dma.c: Include stdlib.h.
 256
 257 2021-01-02  Mike Frysinger  <vapier@gentoo.org>
 258
 259         * interp.c: Change ALIGN to align_up.
 260         * sim-main.h (ALIGN): Delete
 261
 262 2020-08-21  Simon Marchi  <simon.marchi@polymtl.ca>
 263
 264         * configure.ac: Include config/pkg.m4.
 265
 266 2020-07-29  Simon Marchi  <simon.marchi@efficios.com>
 267
 268         * aclocal.m4, configure: Re-generate.
 269
 270 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 271
 272         * configure: Regenerate.
 273
 274 2016-08-13  Mike Frysinger  <vapier@gentoo.org>
 275
 276         PR sim/20438
 277         * machs.h (MODEL_TYPE, MACH_ATTR, BFIN_INSN_*): Move ...
 278         * arch.h: ... to this new header file.
 279         * sim-main.h (SIM_CPU): Delete.
 280         Include arch.h before sim-base.h, and move sim-base.h before
 281         bfin-sim.h.
 282
 283 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 284
 285         * config.in, configure: Regenerate.
 286
 287 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 288
 289         * configure: Regenerate.
 290
 291 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 292
 293         * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
 294         * configure: Regenerate.
 295
 296 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 297
 298         * configure: Regenerate.
 299
 300 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 301
 302         * configure: Regenerate.
 303
 304 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 305
 306         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 307         * configure: Regenerate.
 308
 309 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 310
 311         * configure: Regenerate.
 312
 313 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 314
 315         * configure: Regenerate.
 316
 317 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 318
 319         * config.in, configure: Regenerate.
 320
 321 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 322
 323         * interp.c (bfin_syscall): Remove first const from argv.
 324         (sim_open): Mark argv const.
 325         (simple_env): Remove first const.
 326         (bfin_user_init): Remove first const from argv and and env
 327         (bfin_os_init): Remove first const from argv.
 328         (sim_create_inferior): Mark argv and env const.
 329         Drop casts from bfin_user_init and bfin_os_init calls.
 330
 331 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 332
 333         * interp.c (step_once): Call TRACE_DISASM.
 334
 335 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 336
 337         * bfin-sim.c (decode_dsp32shift_0): Change MIN to min.
 338         * dv-bfin_dma.c (bfin_dma_hw_event_callback): Likewise.
 339         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_write_amgctl): Likewise.
 340         * dv-bfin_emac.c (bfin_emac_dma_read_buffer): Change MAX to max.
 341         * dv-bfin_mmu.c (_mmu_check_addr): Change MIN to min.
 342         * dv-bfin_trace.c (bfin_trace_io_read_buffer): Likewise.
 343         * interp.c (bfin_fdpic_load): Change MAX to max.
 344         (bfin_fdpic_load): Likewise.
 345         * sim-main.h (MIN, MAX): Delete.
 346         (CLAMP): Change MIN to min and MAX to max.
 347
 348 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 349
 350         * configure: Regenerate.
 351
 352 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 353
 354         * interp.c (sim_open): Update sim_parse_args comment.
 355
 356 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 357
 358         * TODO: Delete file.
 359
 360 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 361
 362         * interp.c (count_argc): Delete.
 363         (bfin_syscall): Change count_argc to countargv.
 364         (bfin_user_init): Likewise.
 365
 366 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 367
 368         * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
 369         * configure: Regenerate.
 370
 371 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
 374         LITTLE.
 375         * configure: Regenerate.
 376
 377 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 378
 379         * Makefile.in (SIM_OBJS): Delete sim-hload.o.
 380
 381 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 382
 383         * config.in, configure: Regenerate.
 384
 385 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 386
 387         * devices.c (bfin_mmr_invalid): Delete cpu arg and add missing arg.
 388         Add cpu, rw, and reason local vars.  Rewrite error messages.  Add
 389         more todo comments.
 390         (dv_bfin_mmr_invalid): Update bfin_mmr_invalid call.
 391         (dv_bfin_mmr_require): Likewise.  Change return to bool.  Check
 392         alignment of the addr variable.
 393         (bfin_mmr_check, dv_bfin_mmr_check, device_io_read_buffer,
 394         device_io_write_buffer): Delete.
 395         (dv_bfin_mmr_require_16_32): Define.
 396         * devices.h (dv_bfin_mmr_require): Change return to bool.
 397         (dv_bfin_mmr_check): Delete.
 398         (dv_bfin_mmr_require_16_32): Define.
 399         Add a few comments.
 400         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Call
 401         dv_bfin_mmr_require_32.
 402         (bfin_cec_io_read_buffer): Likewise.
 403         * dv-bfin_ctimer.c (bfin_ctimer_io_write_buffer): Likewise.
 404         (bfin_ctimer_io_read_buffer): Likewise.
 405         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Call
 406         dv_bfin_mmr_require_16_32.  Return 0 in the default case.
 407         (bfin_dma_io_read_buffer): Call dv_bfin_mmr_require_16_32.
 408         * dv-bfin_ebiu_amc.c (bf50x_ebiu_amc_io_write_buffer): Return 0
 409         when dv_bfin_mmr_require_16 fails and in the default case.
 410         (bf53x_ebiu_amc_io_write_buffer): Likewise.
 411         (bf54x_ebiu_amc_io_write_buffer): Likewise.
 412         (bfin_ebiu_amc_io_write_buffer): Call dv_bfin_mmr_require_16_32.
 413         (bf50x_ebiu_amc_io_read_buffer): Return 0 when
 414         dv_bfin_mmr_require_16 fails and in the default case.
 415         (bf53x_ebiu_amc_io_read_buffer): Likewise.
 416         (bf54x_ebiu_amc_io_read_buffer): Likewise.
 417         (bfin_ebiu_amc_io_read_buffer): Call dv_bfin_mmr_require_16_32.
 418         * dv-bfin_ebiu_ddrc.c (bfin_ebiu_ddrc_io_write_buffer): Call
 419         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16 or
 420         dv_bfin_mmr_require_32 fails.
 421         (bfin_ebiu_ddrc_io_read_buffer): Likewise.
 422         * dv-bfin_ebiu_sdc.c (bfin_ebiu_sdc_io_write_buffer): Likewise.
 423         (bfin_ebiu_sdc_io_read_buffer): Likewise.
 424         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Return 0 when
 425         dv_bfin_mmr_require_32 fails and in the default case.
 426         (bfin_emac_io_read_buffer): Likewise.
 427         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Call
 428         dv_bfin_mmr_require_16_32 and return 0 when dv_bfin_mmr_require_16
 429         or dv_bfin_mmr_require_32 fails and in the default case.
 430         (bfin_eppi_io_read_buffer): Likewise.
 431         * dv-bfin_evt.c (bfin_evt_io_write_buffer): Call
 432         dv_bfin_mmr_require_32.
 433         (bfin_evt_io_read_buffer): Likewise.
 434         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Move call to
 435         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 436         fails and in the default case.
 437         (bfin_gpio_io_read_buffer): Likewise.
 438         * dv-bfin_gpio2.c (bfin_gpio_io_write_buffer): Move call to
 439         dv_bfin_mmr_require_16 and dv_bfin_mmr_require_32 to earlier in the
 440         func.  Return 0 when it fails and in the default case.
 441         (bfin_gpio_io_read_buffer): Likewise.
 442         * dv-bfin_gptimer.c (bfin_gptimer_io_write_buffer): Call
 443         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16 or
 444         dv_bfin_mmr_require_32 fails and in the default case.
 445         (bfin_gptimer_io_read_buffer): Likewise.
 446         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Call
 447         dv_bfin_mmr_require_32.  Return 0 in the default case.
 448         (bfin_jtag_io_read_buffer): Likewise.  Delete while(1) loop.
 449         * dv-bfin_mmu.c (bfin_mmu_io_write_buffer): Call
 450         dv_bfin_mmr_require_32.  Return 0 in the default case.
 451         (bfin_mmu_io_read_buffer): Likewise.  Delete while(1) loop.
 452         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Move call to
 453         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 454         fails and in the default case.
 455         (bfin_nfc_io_read_buffer): Likewise.
 456         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Call
 457         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16
 458         or dv_bfin_mmr_require_32 fails and in the default case.
 459         (bfin_otp_io_read_buffer): Likewise.
 460         * dv-bfin_pfmon.c (bfin_pfmon_io_write_buffer): Call
 461         dv_bfin_mmr_require_32.  Return 0 in the default case.
 462         (bfin_pfmon_io_read_buffer): Likewise.  Delete while(1) loop.
 463         * dv-bfin_pint.c (bfin_pint_io_write_buffer): Move call to
 464         dv_bfin_mmr_require_32 to earlier in the func.  Return 0 when it
 465         fails and in the default case.
 466         (bfin_pint_io_read_buffer): Likewise.
 467         * dv-bfin_pll.c (bfin_pll_io_write_buffer): Call
 468         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16
 469         fails.
 470         (bfin_pll_io_read_buffer): Likewise.
 471         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Move call to
 472         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 473         fails and in the default case.
 474         9bfin_ppi_io_read_buffer): Likewise.
 475         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Call
 476         dv_bfin_mmr_require_16_32.
 477         (bfin_rtc_io_read_buffer): Likewise.
 478         * dv-bfin_sic.c (bfin_sic_52x_io_write_buffer): Likewise.
 479         (bfin_sic_52x_io_read_buffer, bfin_sic_537_io_write_buffer,
 480         bfin_sic_537_io_read_buffer, bfin_sic_54x_io_write_buffer,
 481         bfin_sic_54x_io_read_buffer, bfin_sic_561_io_write_buffer,
 482         bfin_sic_561_io_read_buffer): Likewise.
 483         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Move call to
 484         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 485         fails and in the default case.
 486         (bfin_spi_io_read_buffer): Likewise.
 487         * dv-bfin_trace.c (bfin_trace_io_write_buffer): Call
 488         dv_bfin_mmr_require_32.  Return 0 in the default case.
 489         (bfin_trace_io_read_buffer): Likewise.  Delete while(1) loop.
 490         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Move call to
 491         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 492         fails and in the default case.
 493         (bfin_twi_io_read_buffer): Likewise.
 494         * dv-bfin_uart.c (bfin_uart_io_write_buffer): Likewise.
 495         (bfin_uart_io_read_buffer): Likewise.
 496         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Likewise.
 497         (bfin_uart_io_read_buffer): Likewise.
 498         * dv-bfin_wdog.c (bfin_wdog_io_write_buffer): Call
 499         dv_bfin_mmr_require_16_32.
 500         (bfin_wdog_io_read_buffer): Likewise.  Return 0 when
 501         dv_bfin_mmr_require_16 fails.
 502         * dv-bfin_wp.c (bfin_wp_io_write_buffer): Call
 503         dv_bfin_mmr_require_32.  Return 0 in the default case.
 504         (bfin_wp_io_read_buffer): Likewise.  Delete while(1) loop.
 505         * tconfig.h: Delete file.
 506
 507 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 508
 509         * bfin-sim.c (decode_LDST_0): Add 4th element to posts array.
 510
 511 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 512
 513         * interp.c (sim_create_inferior): Update comment and argv check.
 514
 515 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 516
 517         * Makefile.in (SIM_OBJS): Delete sim-model.o.
 518         * tconfig.h (SIM_HAVE_MODEL): Delete.
 519
 520 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 521
 522         * machs.c: Rename MACH to SIM_MACH, MACH_IMP_PROPERTIES to
 523         SIM_MACH_IMP_PROPERTIES, and MODEL to SIM_MODEL.
 524
 525 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 526
 527         * devices.c (device_error): Delete.
 528
 529 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 530
 531         * tconfig.h (SIM_HANDLES_LMA): Delete.
 532
 533 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
 534
 535         * tconfig.h (WITH_MODULO_MEMORY): Delete.
 536
 537 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 538
 539         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
 540         sim-stop.o.
 541
 542 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 543
 544         * interp.c (sim_close): Delete.
 545
 546 2015-10-11  Mike Frysinger  <vapier@gentoo.org>
 547
 548         PR sim/18407
 549         * bfin-sim.c (decode_dsp32shiftimm_0): Call ashiftrt when count
 550         is less than 0.
 551
 552 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
 553
 554         * interp.c (trace_register): Delete.
 555         * sim-main.h (trace_register, TRACE_REGISTER, TRACE_REG): Delete.
 556
 557 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 558
 559         * configure: Regenerate.
 560
 561 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 562
 563         * interp.c: Include sim-syscall.h.
 564         (syscall_read_mem, syscall_write_mem): Delete.
 565         (bfin_syscall): Change syscall_read_mem/syscall_write_mem to
 566         sim_syscall_read_mem/sim_syscall_write_mem.
 567
 568 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 569
 570         * linux-targ-map.h: Update example comments.
 571         (cb_linux_syscall_map): Fill out name field.
 572         (cb_linux_errno_map, cb_linux_open_map, cb_linux_signal_map):
 573         Likewise.
 574
 575 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 576
 577         * interp.c: Expand comment on CB_SYS_xxx defines.
 578
 579 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 580
 581         * configure: Regenerate.
 582
 583 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 584
 585         * configure: Regenerate.
 586
 587 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 588
 589         * bfin-sim.c (hwloop_get_next_pc): Change TRACE_BRANCH to
 590         BFIN_TRACE_BRANCH.
 591         (decode_ProgCtrl_0, decode_BRCC_0, decode_UJUMP_0, decode_CALLa_0):
 592         Likewise.
 593         * bfin-sim.h (__PUT_MEM, __GET_MEM): Change TRACE_CORE to
 594         BFIN_TRACE_CORE.
 595         * dv-bfin_cec.c (_cec_raise, cec_latch, cec_return): Change
 596         TRACE_BRANCH to BFIN_TRACE_BRANCH.
 597         * interp.c (syscall_read_mem, syscall_write_mem): Change MAYBE_TRACE
 598         to TRACE_CORE.
 599         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
 600         TRACE_SYSCALL, TRACE_EVENTS): Delete.
 601         (TRACE_CORE): Rename to ...
 602         (BFIN_TRACE_CORE): ... this.  Change MAYBE_TRACE to TRACE_CORE.
 603         (TRACE_BRANCH): Rename to ...
 604         (BFIN_TRACE_BRANCH): ... this.  Change MAYBE_TRACE to TRACE_BRANCH.
 605
 606 2015-04-24  David Binderman  <dcb314@hotmail.com>
 607             Nick Clifton  <nickc@redhat.com>
 608
 609         PR 18273
 610         * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for
 611         s == 1.
 612
 613 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 614
 615         * sim-main.h (SIM_CPU): Add note to clean this up.
 616
 617 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 618
 619         * sim-main.h (sim_cia): Delete.
 620
 621 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 622
 623         * sim-main.h (CIA_GET, CIA_SET): Delete.
 624
 625 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 626
 627         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 628         * sim-main.h (STATE_CPU): Delete.
 629
 630 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 631
 632         * configure: Regenerate.
 633
 634 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 635
 636         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 637
 638 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 639
 640         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 641
 642 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 643
 644         * config.in, configure: Regenerate.
 645
 646 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 647
 648         * configure: Regenerate.
 649
 650 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 651
 652         * configure: Regenerate.
 653
 654 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 655
 656         * configure: Regenerate.
 657         * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete.
 658         * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@.
 659
 660 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 661
 662         * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status,
 663         dv_sockser_write, dv_sockser_read): Delete.
 664
 665 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 666
 667         * sim-main.h: Delete run-sim.h include.
 668
 669 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 670
 671         * aclocal.m4, config.in, configure: Regenerate.
 672         * tconfig.in: Rename file ...
 673         * tconfig.h: ... here.
 674
 675 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 676
 677         * tconfig.in: Delete includes.
 678         [HAVE_DV_SOCKSER]: Delete.
 679
 680 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 681
 682         * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
 683
 684 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 685
 686         * Makefile.in (SIM_RUN_OBJS): Delete.
 687
 688 2015-03-10  Mike Frysinger  <vapier@gentoo.org>
 689
 690         PR sim/13160
 691         * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
 692         print sed command for BSD compatibility.
 693
 694 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 695
 696         PR sim/13160
 697         * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
 698         directly rather than use $<.  Move the file name to the end of the
 699         sed command to be POSIX compliant.
 700
 701 2014-08-19  Alan Modra  <amodra@gmail.com>
 702
 703         * configure: Regenerate.
 704
 705 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 706
 707         * configure: Regenerate.
 708         * config.in: Regenerate.
 709
 710 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 711
 712         * configure: Regenerate.
 713
 714 2013-09-23  Alan Modra  <amodra@gmail.com>
 715
 716         * configure: Regenerate.
 717
 718 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 719
 720         * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
 721         SEARCH with parallel insns.
 722
 723 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 724
 725         * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
 726         insn that uses it.
 727         (decode_dsp32shiftimm_0): Likewise.
 728         Require HLs be less than 2 for accumulator shift insns.
 729
 730 2013-06-18  Mike Frysinger  <vapier@gentoo.org>
 731
 732         * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
 733         decoding various insns.
 734
 735 2013-06-17  Mike Frysinger  <vapier@gentoo.org>
 736
 737         * TODO: Add more notes.
 738
 739 2013-06-09  Mike Frysinger  <vapier@gentoo.org>
 740
 741         * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
 742         @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
 743
 744 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 745
 746         * aclocal.m4, configure: Regenerate.
 747
 748 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 749
 750         * configure: Rebuild.
 751
 752 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 753
 754         * aclocal.m4, configure: Regenerate.
 755
 756 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 757
 758         * configure.ac: Use $SIM_DV_SOCKSER_O.
 759         * configure: Regenerated.
 760
 761 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 762
 763         * aclocal.m4: Revert the previous change changing
 764         the license from GPL v2 or later to GPL v3 or later
 765         (this file was generated).
 766
 767 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 768
 769         * linux-fixed-code.s: Revert the previous change changing
 770         the license from GPL v2 or later to GPL v3 or later.
 771
 772 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 773
 774         * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
 775         0x10000 to the alias field of BFROMA.
 776         (bf561_roms): Pass 0x1000 to alias field of BFROM.
 777         (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
 778
 779 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 780
 781         * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
 782         return -1 to return 4.
 783         (bfin_reg_store): Likewise.
 784
 785 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 786
 787         * config.in, configure: Regenerate.
 788
 789 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 790
 791         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
 792         * configure: Regenerate.
 793         * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
 794         * machs.c (bf542_dev): Add PINT register blocks.
 795         (bf544_dev, bf547_dev): Likewise.
 796         (PINT_PIQS): Define.
 797         (bf54x_port): Add pint/gpio routing.
 798         * machs.h (BFIN_MMR_PINT_SIZE): Define.
 799
 800 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 801
 802         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
 803         * configure: Regenerate.
 804         * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
 805         * machs.c (bf54x_mem): Delete GPIO mem stub.
 806         (bf542_dev): Add GPIO register blocks.
 807         (bf544_dev, bf547_dev): Likewise.
 808         * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
 809
 810 2012-04-09  Robin Getz  <robin.getz@analog.com>
 811
 812         * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
 813         and LSHIFT, and set ASTAT based on the before/after values.
 814         Rename "val" to "acc" to be consistent with other code branches.
 815
 816 2012-04-09  Robin Getz  <robin.getz@analog.com>
 817
 818         * bfin-sim.c (sgn_extend): New helper.
 819         (decode_dsp32shiftimm_0): Call lshift when newimmag is more
 820         than 16, otherwise call ashiftrt.  Set ASTAT fields as needed.
 821         For accumulator shifts, call new sgn_extend helper.
 822
 823 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 824
 825         * bfin-sim.c (illegal_instruction_or_combination): New helper.
 826         (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
 827         of illegal_instruction.
 828         (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
 829         decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
 830         decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
 831         (decode_PushPopMultiple_0): Call illegal_instruction_combination when
 832         PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
 833         (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
 834         decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
 835         (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
 836         (decode_LDSTpmod_0): Call illegal_instruction_combination when
 837         PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
 838         (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
 839         decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
 840
 841 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 842
 843         * bfin-sim.h (bfin_parallel_group): New enum.
 844         (bfin_cpu_state): Add new "group" member.
 845         (PARALLEL_GROUP): Define.
 846         * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
 847         PARALLEL_GROUP.
 848         (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
 849         decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
 850         decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
 851         decode_CALLa_0, decode_linkage_0): Likewise.
 852         (_interp_insn_bfin): Set PARALLEL_GROUP.
 853         (interp_insn_bfin): Likewise.
 854
 855 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 856
 857         * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
 858
 859 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 860
 861         * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
 862         when INSN_LEN is non-zero before 32bit decode.
 863
 864 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 865
 866         * bfin-dis.c (fmtconst): Replace decimal handling with a single
 867         sprintf call and the '*' field width.
 868
 869 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 870
 871         * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
 872
 873 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 874
 875         * interp.c (bfin_user_init): Move auxvt_size decl from top to
 876         inside of auxvt check.
 877
 878 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 879
 880         * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
 881
 882 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 883
 884         * devices.c: Include devices.h.
 885
 886 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 887
 888         * aclocal.m4, config.in, configure: Regenerate.
 889
 890 2012-03-19  Robin Getz  <robin.getz@analog.com>
 891             Mike Frysinger  <vapier@gentoo.org>
 892
 893         * bfin-sim.c (lshift): Add an overflow flag.  Delete now unused
 894         i, j, and tmp vars.  Add a new v_i var.  Split the overflow logic
 895         out from the saturate logic.  Do not set V ASTAT bits when working
 896         with accumulators.
 897         (decode_ALU2op_0): Add new argument to lshift call.
 898         (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
 899         Likewise.
 900
 901 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 902
 903         * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
 904         (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
 905         amc->bank_base.
 906         (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
 907
 908 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 909
 910         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
 911         ARRAY_SIZE rather than hardcoded constant.
 912
 913 2012-02-04  Mike Frysinger  <vapier@gentoo.org>
 914
 915         * config.in: Regenerate.
 916         * configure: Likewise.
 917         * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
 918         * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
 919         _LINUX_TYPES_H defines.
 920
 921 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 922
 923         * interp.c (bfin_syscall): Increase _tbuf storage.  Declare new local
 924         tstr buffer.  Call cb_get_string on tstr when handling CB_SYS_stat64,
 925         CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
 926         CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat.  Include
 927         tstr in the tbuf output.
 928
 929 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 930
 931         * Makefile.in: Delete all dependency rules.
 932         * aclocal.m4, configure: Regenerate.
 933
 934 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 935
 936         * configure: Regenerate after common/acinclude.m4 update.
 937
 938 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 939
 940         * configure.ac: Change include to common/acinclude.m4.
 941         * aclocal.m4, configure: Regenerate.
 942
 943 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 944
 945         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 946         call.  Replace common.m4 include with SIM_AC_COMMON.
 947         * configure: Regenerate.
 948
 949 2011-09-28  Mike Frysinger  <vapier@gentoo.org>
 950
 951         * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
 952
 953 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
 954
 955         * interp.c (sim_do_command): Delete.
 956
 957 2011-07-01  Mike Frysinger  <vapier@gentoo.org>
 958
 959         * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
 960         stat_map_32 and stat_map_64.
 961         (cb_libgloss_stat_map_32): New stat map.
 962         (stat_map_32, stat_map_64): New stat map pointers.
 963         (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
 964         stat_map_64 to cb_linux_stat_map_64.
 965         (bfin_virtual_init): New function.
 966         (sim_create_inferior): Call bfin_virtual_init for all other envs.
 967
 968 2011-06-22  Mike Frysinger  <vapier@gentoo.org>
 969
 970         * interp.c (bfin_syscall): Delete old comment.  Set dreg 1 to
 971         sc.result2 and dreg 2 to sc.errcode.
 972
 973 2011-06-18  Robin Getz  <robin.getz@analog.com>
 974
 975         * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
 976         else set it.  Set ASTAT[AVS] if val is 0.  Do this for LSHIFT and
 977         ASHIFT accumulator insns.
 978
 979 2011-06-18  Robin Getz  <robin.getz@analog.com>
 980
 981         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
 982         (lshiftrt): Likewise.
 983
 984 2011-06-18  Robin Getz  <robin.getz@analog.com>
 985
 986         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
 987         rather than get_extended_acc in LSHIFT insns.
 988
 989 2011-06-18  Robin Getz  <robin.getz@analog.com>
 990
 991         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
 992         Check MM once when mmod is M_FU to match M_TFU better.
 993
 994 2011-06-18  Robin Getz  <robin.getz@analog.com>
 995
 996         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
 997         32, perform a left shift.  Update the corresponding AV bit.  Set
 998         AZ when the low 32bits are also zero.
 999
1000 2011-06-18  Robin Getz  <robin.getz@analog.com>
1001
1002         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
1003         call lshift only when count is positive.  Otherwise, call ashiftrt.
1004         With arithmetic right shift insns, call ashiftrt when the value is
1005         small enough, otherwise call lshift.
1006
1007 2011-06-18  Robin Getz  <robin.getz@analog.com>
1008
1009         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
1010         mmod is M_IH rather than computing the result by hand.
1011
1012 2011-06-18  Robin Getz  <robin.getz@analog.com>
1013
1014         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
1015         before saturation, set sat when more cases saturate, and set the
1016         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
1017         M_W32, change the max values compared against.
1018         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
1019         when processing MAC1 and pass v_0 when processing MAC0.  Combine
1020         the results into the V/VS ASTAT bits.
1021
1022 2011-06-18  Robin Getz  <robin.getz@analog.com>
1023
1024         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
1025         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
1026         is M_TFU.
1027
1028 2011-06-18  Robin Getz  <robin.getz@analog.com>
1029
1030         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
1031         allow MM to sign extend all the time.
1032         (decode_macfunc): Likewise.  Drop sign extension of unsigned
1033         values.
1034
1035 2011-06-18  Robin Getz  <robin.getz@analog.com>
1036
1037         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
1038         (decode_macfunc): Likewise when mmod is M_IH.
1039
1040 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
1041
1042         * interp.c (sim_create_inferior): Change free to freeargv.
1043
1044 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
1045
1046         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
1047         (bf537_port): Define applicable devices with PORT to the glue-or
1048         devices instead of SIC.
1049         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
1050         Only parse reg/type when the device has an address.  Move the call
1051         to dv_bfin_hw_port_parse up before slash check.
1052
1053 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
1054
1055         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
1056         BFIN_SIC_TO_CEC_PORTS definition.
1057         (SIC_PORTS): New define.
1058         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
1059         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
1060         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
1061         Delete old layouts.
1062         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
1063         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
1064         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
1065         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
1066         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
1067         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
1068         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
1069         * machs.c (bfin_port_layout): New structure.
1070         (bfin_model_data): Add new "port" and "port_count" members.
1071         (PORT, SIC): New defines.
1072         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
1073         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
1074         Move and redefine port layout from dv-bfin_sic.c to here.
1075         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
1076         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
1077         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
1078         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
1079         bf548_port, bf549_port): New defines.
1080         (bfin_model_data): Link in new bfin_port_layout.port member.
1081         (dv_bfin_hw_port_parse): New function.
1082         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
1083         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
1084         bfin_sic links with new dv_bfin_hw_port_parse function.
1085
1086 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
1087
1088         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
1089
1090 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1091
1092         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
1093
1094 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1095
1096         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
1097         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
1098         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
1099         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
1100         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
1101         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
1102         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
1103         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
1104         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
1105         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
1106         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
1107         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
1108         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
1109         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
1110         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
1111         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
1112         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
1113         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
1114         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
1115         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
1116         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
1117         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
1118         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
1119         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
1120         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
1121         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
1122         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
1123         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
1124         * machs.h: ... here.
1125         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
1126
1127 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1128
1129         * Makefile.in (dv-bfin_pfmon.o): New target.
1130         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
1131         * configure: Regenerated.
1132         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
1133         * machs.c: Add include new bfin_pfmon.h.
1134         (bfin_core_dev): Add pfmon.
1135
1136 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1137
1138         * machs.c (bf526_roms): Add a region with rev of 2.
1139         (bf54x_roms): Add regions with rev of 4.
1140         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
1141         bf54x_l1-0.4.h headers.
1142         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
1143         New header files.
1144
1145 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
1146
1147         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
1148         check for SP reg.
1149
1150 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
1151
1152         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
1153         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
1154         and count fields of the uart.
1155         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
1156         and bfin_uart_get_next_byte.
1157         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
1158         check first, and skip the remaining code when LOOP_ENA is set in mcr.
1159         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
1160         (bfin_uart_get_next_byte): Likewise.
1161         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
1162         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
1163         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
1164
1165 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
1166
1167         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
1168         from uart->lsr before setting them.
1169
1170 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
1171
1172         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
1173         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
1174         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
1175         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
1176         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
1177         Likewise.
1178
1179 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
1180
1181         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
1182         (bfin_gpio_io_write_buffer): Store the current port state into
1183         "data", and call bfin_gpio_forward_ouput when the data or dir
1184         MMRs are updated.
1185         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
1186
1187 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
1188
1189         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
1190         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
1191         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
1192         mask a or mask b MMRs are written.
1193         (bfin_gpio_port_event): When handling edge gpios, set the bit in
1194         int_state, call bfin_gpio_forward_ints, and then clear the bit.
1195         When handling level gpios, clear/set the bit in int_state rather
1196         than returning immediately.  Call bfin_gpio_forward_ints instead
1197         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
1198
1199 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
1200
1201         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
1202         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
1203         BYTEUNPACK.
1204         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
1205         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
1206
1207 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
1208
1209         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
1210         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
1211         and BYTEUNPACK insns.
1212
1213 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
1214
1215         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
1216         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1217         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
1218         in the trace output, and call the new bfin_sic_port_event func.
1219
1220 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
1221
1222         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
1223
1224 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
1225
1226         * dv-bfin_otp.c (bfin_otp_ports): Declare.
1227         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
1228
1229 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
1230
1231         * configure: Regenerate after common/aclocal.m4 changes.
1232
1233 2011-03-28  Robin Getz  <robin.getz@analog.com>
1234
1235         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
1236         and add to casted low 16bits of A0.L and store in val0.  Cast high
1237         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
1238         store in val1.  Delete bit checks of val0 and val1.
1239
1240 2011-03-26  Robin Getz  <robin.getz@analog.com>
1241
1242         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
1243         the result was 0x80000000 for RND12 subtraction.
1244
1245 2011-03-26  Robin Getz  <robin.getz@analog.com>
1246
1247         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
1248
1249 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1250
1251         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
1252         major code flow point.
1253         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
1254         before calling hw_port_event on ourselves.
1255         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1256         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
1257         at the start of the function.
1258
1259 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1260
1261         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
1262         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
1263         Invert port->both bit check.
1264
1265 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1266
1267         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
1268         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
1269
1270 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1271
1272         * TODO: Document some known SIC issues.
1273
1274 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1275
1276         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
1277         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
1278         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
1279         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
1280         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
1281         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
1282         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
1283         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
1284         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
1285         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
1286         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
1287         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
1288         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
1289         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
1290
1291 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1292
1293         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
1294
1295 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1296
1297         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
1298
1299 2011-03-23  Robin Getz  <robin.getz@analog.com>
1300
1301         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
1302         value for the VIT_MAX insn, and mask off the result when done.
1303
1304 2011-03-23  Robin Getz  <robin.getz@analog.com>
1305
1306         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
1307         and set A0 to a0_lo when up_lo is false.
1308
1309 2011-03-23  Robin Getz  <robin.getz@analog.com>
1310
1311         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
1312         saturate_s40, and use the v parameter to update the AV bit.  Set the
1313         AC bit only when the final result is 0.
1314
1315 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1316
1317         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
1318         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
1319         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
1320         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
1321         Encode ids with the ENC macro.
1322         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1323         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
1324         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
1325         (bfin_sic_533_port_event): Delete.
1326         (bfin_sic_finish): Call set_hw_port_event with
1327         bfin_sic_537_port_event for BF533 and BF59x targets.
1328
1329 2011-03-23  Robin Getz  <robin.getz@analog.com>
1330
1331         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
1332         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
1333
1334 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1335
1336         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
1337         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
1338         Change bfin_gpio addresses from f/g/h to 5/6/7.
1339         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
1340
1341 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
1342
1343         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
1344         * configure: Regenerate.
1345         * config.in: Regenerate.
1346         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
1347         kill or pread.
1348
1349 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
1350
1351         * Makefile.in (dv-bfin_gpio.o): New target.
1352         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
1353         * configure: Regenerate.
1354         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
1355         * machs.c: Include dv-bfin_gpio.h.
1356         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
1357         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
1358         Delete GPIO memory stubs.
1359         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
1360         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
1361         peripheral devices.
1362         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
1363
1364 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
1365
1366         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
1367         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
1368         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
1369         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
1370         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
1371         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
1372         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
1373         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
1374         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
1375         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
1376         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
1377         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
1378         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
1379         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
1380         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
1381         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
1382         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
1383
1384 2011-03-15  Robin Getz  <robin.getz@analog.com>
1385
1386         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
1387         and subs.
1388
1389 2011-03-15  Robin Getz  <robin.getz@analog.com>
1390
1391         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
1392
1393 2011-03-15  Robin Getz  <robin.getz@analog.com>
1394
1395         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
1396         high bit is set after extract_mult.
1397         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
1398         functions.  Use these to update the AN bit.
1399
1400 2011-03-15  Robin Getz  <robin.getz@analog.com>
1401
1402         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
1403         the extract_mult functions.  Include these when updating the V, VS,
1404         and V_COPY bits.
1405
1406 2011-03-15  Robin Getz  <robin.getz@analog.com>
1407
1408         * bfin-sim.c (astat_names): New global bit array.
1409         (decode_CC2stat_0): Delete local astat_name and astat_names.
1410         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
1411         Print out ASTAT bit values when checking an ASTAT register.
1412
1413 2010-03-15  Robin Getz  <robin.getz@analog.com>
1414
1415         * bfin-sim.c (extract_mult): Handle M_IU.
1416
1417 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
1418
1419         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
1420         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
1421         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
1422         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
1423         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
1424         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
1425         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
1426         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
1427         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
1428         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
1429         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
1430         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
1431         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
1432         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
1433         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
1434         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
1435         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
1436         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
1437         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
1438         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
1439         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
1440         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
1441         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
1442         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
1443         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
1444         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
1445         tconfig.in: New Blackfin port.