1 2012-02-04 Mike Frysinger <vapier@gentoo.org>
3 * config.in: Regenerate.
5 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
6 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
7 _LINUX_TYPES_H defines.
9 2011-12-03 Mike Frysinger <vapier@gentoo.org>
11 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
12 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
13 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
14 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
15 tstr in the tbuf output.
17 2011-12-03 Mike Frysinger <vapier@gentoo.org>
19 * Makefile.in: Delete all dependency rules.
20 * aclocal.m4, configure: Regenerate.
22 2011-10-19 Mike Frysinger <vapier@gentoo.org>
24 * configure: Regenerate after common/acinclude.m4 update.
26 2011-10-17 Mike Frysinger <vapier@gentoo.org>
28 * configure.ac: Change include to common/acinclude.m4.
29 * aclocal.m4, configure: Regenerate.
31 2011-10-17 Mike Frysinger <vapier@gentoo.org>
33 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
34 call. Replace common.m4 include with SIM_AC_COMMON.
35 * configure: Regenerate.
37 2011-09-28 Mike Frysinger <vapier@gentoo.org>
39 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
41 2011-07-05 Mike Frysinger <vapier@gentoo.org>
43 * interp.c (sim_do_command): Delete.
45 2011-07-01 Mike Frysinger <vapier@gentoo.org>
47 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
48 stat_map_32 and stat_map_64.
49 (cb_libgloss_stat_map_32): New stat map.
50 (stat_map_32, stat_map_64): New stat map pointers.
51 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
52 stat_map_64 to cb_linux_stat_map_64.
53 (bfin_virtual_init): New function.
54 (sim_create_inferior): Call bfin_virtual_init for all other envs.
56 2011-06-22 Mike Frysinger <vapier@gentoo.org>
58 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
59 sc.result2 and dreg 2 to sc.errcode.
61 2011-06-18 Robin Getz <robin.getz@analog.com>
63 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
64 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
65 ASHIFT accumulator insns.
67 2011-06-18 Robin Getz <robin.getz@analog.com>
69 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
72 2011-06-18 Robin Getz <robin.getz@analog.com>
74 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
75 rather than get_extended_acc in LSHIFT insns.
77 2011-06-18 Robin Getz <robin.getz@analog.com>
79 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
80 Check MM once when mmod is M_FU to match M_TFU better.
82 2011-06-18 Robin Getz <robin.getz@analog.com>
84 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
85 32, perform a left shift. Update the corresponding AV bit. Set
86 AZ when the low 32bits are also zero.
88 2011-06-18 Robin Getz <robin.getz@analog.com>
90 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
91 call lshift only when count is positive. Otherwise, call ashiftrt.
92 With arithmetic right shift insns, call ashiftrt when the value is
93 small enough, otherwise call lshift.
95 2011-06-18 Robin Getz <robin.getz@analog.com>
97 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
98 mmod is M_IH rather than computing the result by hand.
100 2011-06-18 Robin Getz <robin.getz@analog.com>
102 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
103 before saturation, set sat when more cases saturate, and set the
104 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
105 M_W32, change the max values compared against.
106 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
107 when processing MAC1 and pass v_0 when processing MAC0. Combine
108 the results into the V/VS ASTAT bits.
110 2011-06-18 Robin Getz <robin.getz@analog.com>
112 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
113 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
116 2011-06-18 Robin Getz <robin.getz@analog.com>
118 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
119 allow MM to sign extend all the time.
120 (decode_macfunc): Likewise. Drop sign extension of unsigned
123 2011-06-18 Robin Getz <robin.getz@analog.com>
125 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
126 (decode_macfunc): Likewise when mmod is M_IH.
128 2011-06-18 Mike Frysinger <vapier@gentoo.org>
130 * interp.c (sim_create_inferior): Change free to freeargv.
132 2011-06-04 Mike Frysinger <vapier@gentoo.org>
134 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
135 (bf537_port): Define applicable devices with PORT to the glue-or
136 devices instead of SIC.
137 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
138 Only parse reg/type when the device has an address. Move the call
139 to dv_bfin_hw_port_parse up before slash check.
141 2011-06-04 Mike Frysinger <vapier@gentoo.org>
143 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
144 BFIN_SIC_TO_CEC_PORTS definition.
145 (SIC_PORTS): New define.
146 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
147 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
148 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
150 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
151 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
152 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
153 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
154 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
155 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
156 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
157 * machs.c (bfin_port_layout): New structure.
158 (bfin_model_data): Add new "port" and "port_count" members.
159 (PORT, SIC): New defines.
160 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
161 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
162 Move and redefine port layout from dv-bfin_sic.c to here.
163 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
164 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
165 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
166 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
167 bf548_port, bf549_port): New defines.
168 (bfin_model_data): Link in new bfin_port_layout.port member.
169 (dv_bfin_hw_port_parse): New function.
170 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
171 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
172 bfin_sic links with new dv_bfin_hw_port_parse function.
174 2011-06-03 Mike Frysinger <vapier@gentoo.org>
176 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
178 2011-05-25 Mike Frysinger <vapier@gentoo.org>
180 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
182 2011-05-25 Mike Frysinger <vapier@gentoo.org>
184 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
185 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
186 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
187 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
188 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
189 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
190 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
191 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
192 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
193 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
194 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
195 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
196 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
197 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
198 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
199 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
200 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
201 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
202 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
203 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
204 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
205 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
206 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
207 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
208 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
209 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
210 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
211 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
213 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
215 2011-05-25 Mike Frysinger <vapier@gentoo.org>
217 * Makefile.in (dv-bfin_pfmon.o): New target.
218 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
219 * configure: Regenerated.
220 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
221 * machs.c: Add include new bfin_pfmon.h.
222 (bfin_core_dev): Add pfmon.
224 2011-05-25 Mike Frysinger <vapier@gentoo.org>
226 * machs.c (bf526_roms): Add a region with rev of 2.
227 (bf54x_roms): Add regions with rev of 4.
228 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
229 bf54x_l1-0.4.h headers.
230 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
233 2011-05-14 Mike Frysinger <vapier@gentoo.org>
235 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
238 2011-05-14 Mike Frysinger <vapier@gentoo.org>
240 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
241 local uart. When LOOP_ENA is set in mcr, write to the saved byte
242 and count fields of the uart.
243 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
244 and bfin_uart_get_next_byte.
245 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
246 check first, and skip the remaining code when LOOP_ENA is set in mcr.
247 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
248 (bfin_uart_get_next_byte): Likewise.
249 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
250 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
251 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
253 2011-05-09 Mike Frysinger <vapier@gentoo.org>
255 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
256 from uart->lsr before setting them.
258 2011-04-27 Mike Frysinger <vapier@gentoo.org>
260 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
261 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
262 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
263 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
264 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
267 2011-04-26 Mike Frysinger <vapier@gentoo.org>
269 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
270 (bfin_gpio_io_write_buffer): Store the current port state into
271 "data", and call bfin_gpio_forward_ouput when the data or dir
273 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
275 2011-04-26 Mike Frysinger <vapier@gentoo.org>
277 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
278 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
279 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
280 mask a or mask b MMRs are written.
281 (bfin_gpio_port_event): When handling edge gpios, set the bit in
282 int_state, call bfin_gpio_forward_ints, and then clear the bit.
283 When handling level gpios, clear/set the bit in int_state rather
284 than returning immediately. Call bfin_gpio_forward_ints instead
285 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
287 2011-04-16 Mike Frysinger <vapier@gentoo.org>
289 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
290 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
292 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
293 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
295 2011-04-14 Mike Frysinger <vapier@gentoo.org>
297 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
298 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
299 and BYTEUNPACK insns.
301 2011-04-11 Mike Frysinger <vapier@gentoo.org>
303 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
304 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
305 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
306 in the trace output, and call the new bfin_sic_port_event func.
308 2011-04-11 Mike Frysinger <vapier@gentoo.org>
310 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
312 2011-04-01 Mike Frysinger <vapier@gentoo.org>
314 * dv-bfin_otp.c (bfin_otp_ports): Declare.
315 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
317 2011-03-29 Mike Frysinger <vapier@gentoo.org>
319 * configure: Regenerate after common/aclocal.m4 changes.
321 2011-03-28 Robin Getz <robin.getz@analog.com>
323 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
324 and add to casted low 16bits of A0.L and store in val0. Cast high
325 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
326 store in val1. Delete bit checks of val0 and val1.
328 2011-03-26 Robin Getz <robin.getz@analog.com>
330 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
331 the result was 0x80000000 for RND12 subtraction.
333 2011-03-26 Robin Getz <robin.getz@analog.com>
335 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
337 2011-03-24 Mike Frysinger <vapier@gentoo.org>
339 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
340 major code flow point.
341 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
342 before calling hw_port_event on ourselves.
343 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
344 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
345 at the start of the function.
347 2011-03-24 Mike Frysinger <vapier@gentoo.org>
349 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
350 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
351 Invert port->both bit check.
353 2011-03-24 Mike Frysinger <vapier@gentoo.org>
355 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
356 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
358 2011-03-23 Mike Frysinger <vapier@gentoo.org>
360 * TODO: Document some known SIC issues.
362 2011-03-23 Mike Frysinger <vapier@gentoo.org>
364 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
365 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
366 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
367 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
368 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
369 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
370 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
371 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
372 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
373 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
374 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
375 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
376 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
377 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
379 2011-03-23 Mike Frysinger <vapier@gentoo.org>
381 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
383 2011-03-23 Mike Frysinger <vapier@gentoo.org>
385 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
387 2011-03-23 Robin Getz <robin.getz@analog.com>
389 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
390 value for the VIT_MAX insn, and mask off the result when done.
392 2011-03-23 Robin Getz <robin.getz@analog.com>
394 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
395 and set A0 to a0_lo when up_lo is false.
397 2011-03-23 Robin Getz <robin.getz@analog.com>
399 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
400 saturate_s40, and use the v parameter to update the AV bit. Set the
401 AC bit only when the final result is 0.
403 2011-03-23 Mike Frysinger <vapier@gentoo.org>
405 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
406 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
407 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
408 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
409 Encode ids with the ENC macro.
410 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
411 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
412 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
413 (bfin_sic_533_port_event): Delete.
414 (bfin_sic_finish): Call set_hw_port_event with
415 bfin_sic_537_port_event for BF533 and BF59x targets.
417 2011-03-23 Robin Getz <robin.getz@analog.com>
419 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
420 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
422 2011-03-23 Mike Frysinger <vapier@gentoo.org>
424 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
425 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
426 Change bfin_gpio addresses from f/g/h to 5/6/7.
427 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
429 2011-03-17 Mike Frysinger <vapier@gentoo.org>
431 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
432 * configure: Regenerate.
433 * config.in: Regenerate.
434 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
437 2011-03-15 Mike Frysinger <vapier@gentoo.org>
439 * Makefile.in (dv-bfin_gpio.o): New target.
440 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
441 * configure: Regenerate.
442 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
443 * machs.c: Include dv-bfin_gpio.h.
444 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
445 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
446 Delete GPIO memory stubs.
447 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
448 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
450 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
452 2011-03-15 Mike Frysinger <vapier@gentoo.org>
454 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
455 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
456 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
457 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
458 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
459 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
460 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
461 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
462 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
463 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
464 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
465 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
466 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
467 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
468 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
469 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
470 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
472 2011-03-15 Robin Getz <robin.getz@analog.com>
474 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
477 2011-03-15 Robin Getz <robin.getz@analog.com>
479 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
481 2011-03-15 Robin Getz <robin.getz@analog.com>
483 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
484 high bit is set after extract_mult.
485 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
486 functions. Use these to update the AN bit.
488 2011-03-15 Robin Getz <robin.getz@analog.com>
490 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
491 the extract_mult functions. Include these when updating the V, VS,
494 2011-03-15 Robin Getz <robin.getz@analog.com>
496 * bfin-sim.c (astat_names): New global bit array.
497 (decode_CC2stat_0): Delete local astat_name and astat_names.
498 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
499 Print out ASTAT bit values when checking an ASTAT register.
501 2010-03-15 Robin Getz <robin.getz@analog.com>
503 * bfin-sim.c (extract_mult): Handle M_IU.
505 2011-03-05 Mike Frysinger <vapier@gentoo.org>
507 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
508 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
509 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
510 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
511 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
512 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
513 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
514 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
515 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
516 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
517 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
518 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
519 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
520 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
521 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
522 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
523 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
524 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
525 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
526 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
527 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
528 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
529 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
530 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
531 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
532 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
533 tconfig.in: New Blackfin port.