sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
   4         mmod is M_IH rather than computing the result by hand.
   5
   6 2011-06-18  Robin Getz  <robin.getz@analog.com>
   7
   8         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
   9         before saturation, set sat when more cases saturate, and set the
  10         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
  11         M_W32, change the max values compared against.
  12         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
  13         when processing MAC1 and pass v_0 when processing MAC0.  Combine
  14         the results into the V/VS ASTAT bits.
  15
  16 2011-06-18  Robin Getz  <robin.getz@analog.com>
  17
  18         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
  19         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
  20         is M_TFU.
  21
  22 2011-06-18  Robin Getz  <robin.getz@analog.com>
  23
  24         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
  25         allow MM to sign extend all the time.
  26         (decode_macfunc): Likewise.  Drop sign extension of unsigned
  27         values.
  28
  29 2011-06-18  Robin Getz  <robin.getz@analog.com>
  30
  31         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
  32         (decode_macfunc): Likewise when mmod is M_IH.
  33
  34 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
  35
  36         * interp.c (sim_create_inferior): Change free to freeargv.
  37
  38 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  39
  40         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  41         (bf537_port): Define applicable devices with PORT to the glue-or
  42         devices instead of SIC.
  43         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  44         Only parse reg/type when the device has an address.  Move the call
  45         to dv_bfin_hw_port_parse up before slash check.
  46
  47 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  50         BFIN_SIC_TO_CEC_PORTS definition.
  51         (SIC_PORTS): New define.
  52         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  53         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  54         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  55         Delete old layouts.
  56         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  57         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  58         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  59         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  60         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  61         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  62         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  63         * machs.c (bfin_port_layout): New structure.
  64         (bfin_model_data): Add new "port" and "port_count" members.
  65         (PORT, SIC): New defines.
  66         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  67         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  68         Move and redefine port layout from dv-bfin_sic.c to here.
  69         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  70         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  71         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
  72         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
  73         bf548_port, bf549_port): New defines.
  74         (bfin_model_data): Link in new bfin_port_layout.port member.
  75         (dv_bfin_hw_port_parse): New function.
  76         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
  77         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
  78         bfin_sic links with new dv_bfin_hw_port_parse function.
  79
  80 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
  81
  82         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
  83
  84 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  85
  86         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
  87
  88 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  89
  90         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
  91         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
  92         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
  93         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
  94         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
  95         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
  96         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
  97         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
  98         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
  99         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 100         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 101         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 102         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 103         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 104         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 105         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 106         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 107         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 108         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 109         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 110         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 111         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 112         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 113         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 114         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 115         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 116         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 117         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 118         * machs.h: ... here.
 119         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 120
 121 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * Makefile.in (dv-bfin_pfmon.o): New target.
 124         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 125         * configure: Regenerated.
 126         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 127         * machs.c: Add include new bfin_pfmon.h.
 128         (bfin_core_dev): Add pfmon.
 129
 130 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 131
 132         * machs.c (bf526_roms): Add a region with rev of 2.
 133         (bf54x_roms): Add regions with rev of 4.
 134         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 135         bf54x_l1-0.4.h headers.
 136         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 137         New header files.
 138
 139 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 140
 141         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 142         check for SP reg.
 143
 144 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 145
 146         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 147         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 148         and count fields of the uart.
 149         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 150         and bfin_uart_get_next_byte.
 151         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 152         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 153         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 154         (bfin_uart_get_next_byte): Likewise.
 155         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 156         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 157         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 158
 159 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 162         from uart->lsr before setting them.
 163
 164 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 165
 166         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 167         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 168         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 169         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 170         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 171         Likewise.
 172
 173 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 176         (bfin_gpio_io_write_buffer): Store the current port state into
 177         "data", and call bfin_gpio_forward_ouput when the data or dir
 178         MMRs are updated.
 179         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 180
 181 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 182
 183         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 184         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 185         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 186         mask a or mask b MMRs are written.
 187         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 188         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 189         When handling level gpios, clear/set the bit in int_state rather
 190         than returning immediately.  Call bfin_gpio_forward_ints instead
 191         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 192
 193 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 194
 195         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 196         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 197         BYTEUNPACK.
 198         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 199         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 200
 201 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 202
 203         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 204         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 205         and BYTEUNPACK insns.
 206
 207 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 210         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 211         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 212         in the trace output, and call the new bfin_sic_port_event func.
 213
 214 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 215
 216         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 217
 218 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 219
 220         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 221         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 222
 223 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 224
 225         * configure: Regenerate after common/aclocal.m4 changes.
 226
 227 2011-03-28  Robin Getz  <robin.getz@analog.com>
 228
 229         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 230         and add to casted low 16bits of A0.L and store in val0.  Cast high
 231         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 232         store in val1.  Delete bit checks of val0 and val1.
 233
 234 2011-03-26  Robin Getz  <robin.getz@analog.com>
 235
 236         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 237         the result was 0x80000000 for RND12 subtraction.
 238
 239 2011-03-26  Robin Getz  <robin.getz@analog.com>
 240
 241         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 242
 243 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 246         major code flow point.
 247         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 248         before calling hw_port_event on ourselves.
 249         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 250         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 251         at the start of the function.
 252
 253 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 254
 255         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 256         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 257         Invert port->both bit check.
 258
 259 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 260
 261         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 262         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 263
 264 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 265
 266         * TODO: Document some known SIC issues.
 267
 268 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 269
 270         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 271         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 272         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 273         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 274         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 275         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 276         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 277         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 278         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 279         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 280         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 281         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 282         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 283         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 284
 285 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 286
 287         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 288
 289 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 290
 291         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 292
 293 2011-03-23  Robin Getz  <robin.getz@analog.com>
 294
 295         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 296         value for the VIT_MAX insn, and mask off the result when done.
 297
 298 2011-03-23  Robin Getz  <robin.getz@analog.com>
 299
 300         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 301         and set A0 to a0_lo when up_lo is false.
 302
 303 2011-03-23  Robin Getz  <robin.getz@analog.com>
 304
 305         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 306         saturate_s40, and use the v parameter to update the AV bit.  Set the
 307         AC bit only when the final result is 0.
 308
 309 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 310
 311         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 312         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 313         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 314         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 315         Encode ids with the ENC macro.
 316         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 317         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 318         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 319         (bfin_sic_533_port_event): Delete.
 320         (bfin_sic_finish): Call set_hw_port_event with
 321         bfin_sic_537_port_event for BF533 and BF59x targets.
 322
 323 2011-03-23  Robin Getz  <robin.getz@analog.com>
 324
 325         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 326         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 327
 328 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 329
 330         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 331         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 332         Change bfin_gpio addresses from f/g/h to 5/6/7.
 333         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 334
 335 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 336
 337         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 338         * configure: Regenerate.
 339         * config.in: Regenerate.
 340         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 341         kill or pread.
 342
 343 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 344
 345         * Makefile.in (dv-bfin_gpio.o): New target.
 346         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 347         * configure: Regenerate.
 348         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 349         * machs.c: Include dv-bfin_gpio.h.
 350         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 351         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 352         Delete GPIO memory stubs.
 353         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 354         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 355         peripheral devices.
 356         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 357
 358 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 359
 360         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 361         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 362         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 363         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 364         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 365         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 366         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 367         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 368         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 369         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 370         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 371         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 372         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 373         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 374         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 375         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 376         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 377
 378 2011-03-15  Robin Getz  <robin.getz@analog.com>
 379
 380         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 381         and subs.
 382
 383 2011-03-15  Robin Getz  <robin.getz@analog.com>
 384
 385         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 386
 387 2011-03-15  Robin Getz  <robin.getz@analog.com>
 388
 389         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 390         high bit is set after extract_mult.
 391         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 392         functions.  Use these to update the AN bit.
 393
 394 2011-03-15  Robin Getz  <robin.getz@analog.com>
 395
 396         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 397         the extract_mult functions.  Include these when updating the V, VS,
 398         and V_COPY bits.
 399
 400 2011-03-15  Robin Getz  <robin.getz@analog.com>
 401
 402         * bfin-sim.c (astat_names): New global bit array.
 403         (decode_CC2stat_0): Delete local astat_name and astat_names.
 404         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 405         Print out ASTAT bit values when checking an ASTAT register.
 406
 407 2010-03-15  Robin Getz  <robin.getz@analog.com>
 408
 409         * bfin-sim.c (extract_mult): Handle M_IU.
 410
 411 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 412
 413         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 414         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 415         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 416         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 417         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 418         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 419         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 420         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 421         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 422         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 423         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 424         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 425         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 426         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 427         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 428         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 429         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 430         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 431         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 432         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 433         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 434         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 435         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 436         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 437         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 438         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 439         tconfig.in: New Blackfin port.